rendered paste bodyLeviatan# dmesg
OpenBSD 4.0 (GENERIC) #1107: Sat Sep 16 19:15:58 MDT 2006
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) D CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,CNXT-ID,CX16
cpu0: Enhanced SpeedStep disabled by BIOS
real mem = 1071722496 (1046604K)
avail mem = 969613312 (946888K)
using 4256 buffers containing 53690368 bytes (52432K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/20/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (63 entries)
bios0: Dell Inc. PowerEdge SC440
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfed10/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GH LPC" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1800 0xca800/0x2000! 0xcc800/0x3800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x00
ppb0 at pci0 dev 1 function 0 "Intel E7230 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: irq 3
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: irq 9
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci5 at ppb4 bus 5
rl0 at pci5 dev 2 function 0 "Realtek 8139" rev 0x10: irq 3, address 00:08:54:51:41:44
rlphy0 at rl0 phy 0: RTL internal PHY
fxp0 at pci5 dev 4 function 0 "Intel 8255x" rev 0x0c, i82550: irq 11, address 00:0e:0c:d8:63:00
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci5 dev 7 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8485B, 1.06> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3808110AS>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: irq 10
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask f7ed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
umass0 at uhub4 port 8 configuration 1 interface 0
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
cd1 at scsibus1 targ 1 lun 0: <TSSTcorp, CD/DVDW SH-S182D, SB01> SCSI0 5/cdrom removable
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Primax Electronics USB Optical Mouse, rev 2.00/2.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
ugen0 at uhub1 port 2uhidev1 at uhub2 port 1 configuration 1 interface 0
ugen0: 2Wire Inc 2Wire USB Remote NDIS Ethernet, rev 1.01/1.00, addr 2
uhidev1: APC Back-UPS ES 500 FW:824.B1.D USB FW:B1, rev 1.10/1.06, addr 2, iclass 3/0
uhidev1: 123 report ids
uhid0 at uhidev1 reportid 1: input=0, output=0, feature=1
uhid1 at uhidev1 reportid 2: input=0, output=0, feature=1
uhid2 at uhidev1 reportid 3: input=0, output=0, feature=1
uhid3 at uhidev1 reportid 4: input=0, output=0, feature=1
uhid4 at uhidev1 reportid 5: input=0, output=0, feature=1
uhid5 at uhidev1 reportid 6: input=1, output=0, feature=1
uhid6 at uhidev1 reportid 7: input=0, output=0, feature=2
uhid7 at uhidev1 reportid 8: input=0, output=0, feature=2
uhid8 at uhidev1 reportid 9: input=0, output=0, feature=2
uhid9 at uhidev1 reportid 10: input=0, output=0, feature=1
uhid10 at uhidev1 reportid 11: input=0, output=0, feature=1
uhid11 at uhidev1 reportid 12: input=3, output=0, feature=3
uhid12 at uhidev1 reportid 13: input=0, output=0, feature=1
uhid13 at uhidev1 reportid 14: input=0, output=0, feature=1
uhid14 at uhidev1 reportid 15: input=0, output=0, feature=1
uhid15 at uhidev1 reportid 16: input=0, output=0, feature=1
uhid16 at uhidev1 reportid 17: input=0, output=0, feature=1
uhid17 at uhidev1 reportid 18: input=0, output=0, feature=1
uhid18 at uhidev1 reportid 22: input=4, output=0, feature=4
uhid19 at uhidev1 reportid 23: input=0, output=0, feature=2
uhid20 at uhidev1 reportid 24: input=0, output=0, feature=1
uhid21 at uhidev1 reportid 28: input=0, output=0, feature=3
uhid22 at uhidev1 reportid 32: input=0, output=0, feature=2
uhid23 at uhidev1 reportid 34: input=0, output=0, feature=1
uhid24 at uhidev1 reportid 35: input=0, output=0, feature=2
uhid25 at uhidev1 reportid 36: input=0, output=0, feature=2
uhid26 at uhidev1 reportid 37: input=0, output=0, feature=2
uhid27 at uhidev1 reportid 38: input=0, output=0, feature=2
uhid28 at uhidev1 reportid 39: input=0, output=0, feature=1
uhid29 at uhidev1 reportid 40: input=0, output=0, feature=4
uhid30 at uhidev1 reportid 48: input=0, output=0, feature=1
uhid31 at uhidev1 reportid 49: input=0, output=0, feature=1
uhid32 at uhidev1 reportid 50: input=0, output=0, feature=1
uhid33 at uhidev1 reportid 51: input=0, output=0, feature=1
uhid34 at uhidev1 reportid 52: input=0, output=0, feature=1
uhid35 at uhidev1 reportid 53: input=0, output=0, feature=1
uhid36 at uhidev1 reportid 54: input=0, output=0, feature=1
uhid37 at uhidev1 reportid 64: input=0, output=0, feature=1
uhid38 at uhidev1 reportid 65: input=0, output=0, feature=2
uhid39 at uhidev1 reportid 80: input=0, output=0, feature=1
uhid40 at uhidev1 reportid 81: input=0, output=0, feature=1
uhid41 at uhidev1 reportid 96: input=0, output=0, feature=2
uhid42 at uhidev1 reportid 97: input=0, output=0, feature=1
uhid43 at uhidev1 reportid 98: input=0, output=0, feature=4
uhid44 at uhidev1 reportid 120: input=0, output=0, feature=1
uhid45 at uhidev1 reportid 121: input=0, output=0, feature=1
uhid46 at uhidev1 reportid 122: input=0, output=0, feature=4
uhid47 at uhidev1 reportid 123: input=0, output=0, feature=2
uhidev2 at uhub0 port 2 configuration 1 interface 0
uhidev2: Dell Dell USB Keyboard, rev 1.10/3.50, addr 3, iclass 3/1
ukbd0 at uhidev2: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Leviatan#