Mine

U-Boot 1.2.0-moko9_r0 (Aug 19 2007 - 19:17:12)

DRAM:  128 MB
NAND:  64 MiB
Found Environment offset in OOB..
Video: 640x480x8 31kHz 59Hz

NAND read: device 0 offset 0x25c000, size 0x5000

Reading data from 0x260e00 -- 100% complete.
 20480 bytes read: OK
USB:   S3C2410 USB Deviced
In:    serial
Out:   serial
Err:   serial
pcf_write: charging in Qualification Mode.
pcf_write: charge voltage 4.20V.
neo_lcd_rst_switch: LCD reset.
jbt6k74_command: Display on.
neo_vib_switch: Buzz, buzz.
neo_vib_switch: Vibrator stopped.
neo_bl_switch: LCD Backlight now on.
GTA01Bv4 #                              
GTA01Bv4 # 
GTA01Bv4 # nand write.e 0x31000000 kernel 0x177a14

NAND write: device 0 offset 0x54000, size 0x177a14

Writing data at 0x1cba00 -- 100% complete.
 1538580 bytes written: OK
GTA01Bv4 # neo1973 power-off
poweroff
pcf_write: Power-off requested.
openmoko/flash.sh: line 88: 17632 Terminated              ( sleep $2; kill $pid; sleep 1; kill -KILL $pid )
Available alarm timers, in order of precedence:
unix
Please wait, programming the NAND flash...