rendered paste body/[root@Arianux ~]# /testapp1-nogui.exe
Inserting STAPI modules
System date is set to:
Fri Mar 24 11:11:00 UTC 2006
stapi_modlist.txt is not exist
Dummy Partitions initialized
ACCESS 00000002
Open Read/Write
PIO 0-5 initialized
EVT_Setup(EVT)=EVT_Open=STACCESS 00000002
Open Read/Write
_NO_ERROR
EVT_SetuACCESS 00000002
Open Read/Write
p(EVT1)=EVT_OpenUTILS: ioctl command 0 [0x00007e00]
=ST_NO_UTILS: ioctl command 7 [0x00007e07]
UTILS_IOC_READREGISTER: at Register_p b9001000
ERROR
vvj> we are not COCOREF !!!
I2C_BACK init ok
I2C_VIDEO init ok
I2C_FRONT init ok
======================================================================
<<< 7109LINUX REFERENCE TREE RELEASE REL_1.0.0 >>>
<<<<<<<<<<<<< 7109 SILICON CUT 2.0 >>>>>>>>>>>>>>
<<<<<<<<<<< Infrastructure & Utilities >>>>>>>>>>>
BOARD BOARD-REL_2.4.7
CHIP CHIP-REL_2.1.27
MAKE MAKE-REL_3.0.2A0
INCLUDE INCLUDE-REL_2.1.15
STEVT STEVT-REL_2.1.2
STCOMMON STCOMMON-REL_2.0.1
STOS STOS-REL_2.1.1
STSYS STSYS-REL_1.4.2
TESTTOOL STTST-REL_3.3.3
STAPACCESS 00000002
Open Read/Write
ioctl command [0XC004060A]
STTUNER_GETREVISION: Revision is STTUNER-REL_6.2.4
STTUNER_GETREVISION: Strlen is 17
IGAT STAPIGAT-REL_1.0.66
<<<<<<<<<<<<< Video, Display & Audio >>>>>>>>>>>>>
STAUDLX Aud Drv = [STAUDLX-REL_1.0.3]:Recommended LX = [HEGRnD_CBL_ACC_AMP_BL017_10]
STVID STVID-REL_3.14.2
STVMIX STVMIX-REL_2.0.10
STVTG STVTG-REL_1.14.1
STVOUT STVOUT-REL_4.3.1
STAVMEM STAVMEM-REL_4.4.0
STDENC STDENC-REL_3.3.20
ACCESS 00000002
Open Read/Write
STHDMI ioctl command [0XC0040614]
STHDMI-REL_2.1.1
STLAYER SACCESS 00000002
Open Read/Write
ioctl command [0XC0040600]
TLioctl command [0XC0040602]
AYER-REL_3.8.5
ChipID = 46
STCLKRV STCLKRV-REL_5.4.0A0
<<<<<<<<<<<<<<<<< FE & Transport >>>>>>>>>>>>>>>>>
STTUNER STTUNER-REL_6.2.4
STMERGE STMERGE-REL_2.2.1
STPTI4 STPTI_DVB-REL_6.6.5
<<<<<<<<<<<<<<<<<<<< Graphics >>>>>>>>>>>>>>>>>>>>
STBLIT STBLIT-REL_1.10.0
STGFB STGFB-REL_1.0.1
STGXOBJ STGXOBJ-REL_4.0.3
<<<<<<<<<<<<<<<<<< Peripherals >>>>>>>>>>>>>>>>>>>
STFDMA STFDMA-REL_2.2.0
STSMART STSMART-REL_3.7.1A1
STBLAST STBLAST-REL_3.5.0
STVBI STVBI-REL_1.3.5
STTTX STTTX-REL_3.1.4A3
STCC STCC-REL_2.0.13
STPIO PRJ-STPIO-REL_1.4.0A2
STI2C STI2C-REL_2.4.1
<<<<<<<<<<<<<<<<< DVR Components >>>>>>>>>>>>>>>>>
STINJ STINJ-REL_1.0.0
STDVM STDVM-REL_3.3.1A0
STPRM STPRM-REL_3.2.1A0
======================================================================
vvj ------ TUNER_USED == 1 -------...
------BusIndex 0 -------...
TunerInstance:1 at Address:10, BusIndex:0
Searching...
Found Tuner: DemodAddress:0x10 ID:0x46
Tuner is STV0362 cut 1.0
vvj> but we use TUNER_TER_TDA10046...
TUNER: Evt subscribed Ok
Set TDA10046 TER InitParam!!!
TUNER_Setup(TDA10046_TER,TUNER0,I2C_BACK,EVT)=STTUNER_Init ST_NO_ERROR
demod_tda10046_firmwareload: DSP version controll error
demod_tda10046_firmwareload: DSP version 29;
TUNER_Open=ST_NO_ERROR
TUNER_Handlioctl command [0XC004060C]
e_Multiple[TunerInst] = 425984
TUNER_Setup: Setup band list!!!
TUNER_SetBanioctl command [0XC004060D]
dList=ST_NO_ERROR
TUNER_SetScanList=Sioctl command [0XC004060F]
STTUNER_SETFREQUENCY: Frequency is 722000
STTUNER_SETFREQUENCY: ScanParams_p->Modulation is 64
T_NO_ERROR
Lock to Transponder/Channel #6: ARD
Got uRF=721997634;
RF locked 721997 Hz
*Can't get BER
STTUNER_SetFrequencioctl command [0XC0040608]
sttuner_ioctl: STTUNER_IOC_GETTUNERINFO
yioctl command [0XC0040608]
sttuner_ioctl: STTUNER_IOC_GETTUNERINFO
(TUNER0,722000)=ST_NO_ERROR
Tuner Locked
TUNER_GetTunerInfo: FREQ=721997 STATUS=LOCKED FEC=NONE MOD=ALL BAND=3 AGC=TRUE
*Can't get BER
*Can't get BER
*Can't get BER
ACCESS 00000002
Open Read/Write
STMERGE_Init successful
SERVICE_TSpticore: Interrupt task started
MERGE_InitParams: DVB
Set Params successful
PTIA and PTIB are connected successfully to STMERGE_TSIN_0 !
SERVICE_TSMERGE_InitParams: DVB
Set Params succepticore: LoaderFunction called
ssful
pticore:TC code loaded
PTIA and PTIB are connected successfully to STMERGE_TSIN_1 !
SERVICE_TSMERGE_InitParams: DVB
Set Params successful
PTIA and PTIB are connected successfully to STMERGE_TSIN_2 !
SEpticore: LoaderFunction called
RVICE_TSpticore:TC code loaded
MERGE_InitParams: DVB
Set Params successful
PTIA and PTIB are connected successfully to STMERGE_SWTS_0 !
SERVICE_PTI_InitParams: DVB
PTI_Init(PTI, STPTI_STREAM_ID_TSIN0)= PTI_Open(PTI)=ST_NO_ERROR
SERVICE_PTI_InitParams: DVB
PTI_Init(PTI1, STPTI_STREAM_ID_TSIN1)= PTI_Open(PTI1)=ST_NO_ERROR
SERVICE_PTI_InitParams: DVB
PTI_Init(PTI2, STPTI_STREAM_ID_TSIN2)= PTI_Open(PTI2)=ST_NO_ERROR
SERVICE_PTI_InitParams: DVB
PTI_Init(PTI3, STPTI_STREAM_ID_SWTS0)= PTI_Open(PTI3)=ST_NO_ERROR
PTI_Slots(VID AUD PCR TTXACCESS 00000002
Open Read/Write
ClockRecoveryFilterTask Created..
SUBT DSMCC APG CAP DIP MACCESS 00000002
Open Read/Write
PT PIP )
CLKRV_STVBI_IOC_INIT
Setup(CLACCESS 00000002
Open Read/Write
ioctl command [0X00000F00]
KRioctl command [0X00000F00]
V)ioctl command [0X00000F02]
=ioctl command [0X00000F05]
CLioctl command [0X00000F08]
ioctl command [0X00000F02]
KRV_Open=ST_NO_ERRioctl command [0X00000F05]
Oioctl command [0X00000F08]
ioctl command [0X00000F06]
R
DENC_Setup(DENioctl command [0X00000F08]
C)=ST_NO_ERioctl command [0X00000F08]
ROR
DENC_ioctl command [0X00000F08]
Open=ST_NO_ERROR
DENC_SetMoioctl command [0X00000F08]
de(STDENC_ioctl command [0X00000F08]
MODE_PALBioctl command [0X00000F08]
DGHI)=ST_NACCESS 00000002
Open Read/Write
O_ERROR
VBI_Setup(VBI)=VTG_Setup(VTG)=ST_NO_ERROR
VTG_Setup(AUX_VTG)=ST_NO_ERROR
VTG_Open[0] = ST_NO_ERROR
VTG_SetMode=ST_NO_ERROR
VTG_Open[1] = ST_NO_ERROR
VTG_SetMode=ST_NO_ERROR
STACCESS 00000002
Open Read/Write
ioctl command [0X00001100]
VTG_SetOptionalConfiguration for component HD = ST_NO_ERROR
LAYER_Setup(LAYER_VIDEO1)=ST_NO_ERROR
LAYER_Open=ST_NO_ERROR
LAYER[0].Width = 1280, LAYER[0].Height = 720
LAYER_SetLayerParams=ST_NO_ERROR
LAYER_Setup(LAYER_GDP1)=ST_NO_ERROR
LAYER_Open=ST_NO_ERROR
LAYER[1].Width = 1280, LAYER[1].Height = 720
LAYER_SetLayerParams=ST_NO_ERROR
LAYER_Setup(LAYER_GDP2)=ST_NO_ERROR
LAYER_Open=ST_NO_ERROR
LAYER[2].Width = 1280, LAYER[2].Height = 720ioctl command [0X00001100]
LAYER_SetLayerParams=ST_NO_ERROR
LAYER_Setup(LAYER_APLHA)=ST_NO_ERROR
LAYER_Open=ST_NO_ERROR
LAYER[3].Width = 1280, LAYER[3].Height = 720
LAYER_SetLayerParams=ST_NO_ERROR
LAYER_Setup(LAYER_CURSOR)=ST_NO_ERROR
LAYER_Open=ST_NO_ERROR
LAYER[4].Width = 1280, LAYER[4].Height = 720
LAYER_SetLayerParams=ST_NO_ERROR
LAYER_Setup(LAYER_VIDEO2)=ST_NO_ERROR
LAYER_Open=ST_NO_ERROR
LAYER[5].Width = 720, LAYER[5].Height = 576
LAYER_SetLayerParams=ST_NO_ERROR
VOUT_Init(VOUT_MAIN) -> OK(ST_NO_ERROR)STVOUT_Enable=ST_NO_ERROR
VOioctl command [0X00001102]
Uioctl command [0X00001105]
STVMIX_IOC_ENABLE
T_Init(VOUT_HDMI) -> OK(ST_NO_ERROR)STVOUT_Enable=ST_NO_ERROR
VOUT_Init(VOUT_DVO) -> OK(ST_NO_ERROR)STVOUT_Enable=ST_NO_ERROR
VOUT_Init(VOUT_AUX) -> OK(ST_NO_ERROR)STVOUT_Enable=ST_NO_ERROR
VMIX_Init[VMIX]=ST_NO_ERROR
VMIX_Init[VMIX_AUX]=ST_NO_ERROR
VMIX[0]_Open=ST_NO_ERROR
ioctl command [0X0000110B]
STVMIX_IOC_SETTIMEBASE
Vioctl command [0X00000F08]
ioctl command [0X0000110A]
STVMIX_IOC_SETSCREENPARAMS
Mioctl command [0X00001106]
STVMIX_IOC_ENABLE
IX[0]_Disable=ST_NO_ERROR
VMIX[0]_SetTimeBase=ST_NO_ERROR
VMIX_SetScreenParams(VMIX, 260,26,1280,720, 50000,0,0 )
VMIX enabled!
ioctl command [0X00001102]
VMioctl command [0X00001105]
STVMIX_IOC_ENABLE
IX[1]_Open=ST_NO_ERROR
VMIX[1]_Disable=Sioctl command [0X0000110B]
STVMIX_IOC_SETTIMEBASE
Tioctl command [0X00000F08]
ioctl command [0X0000110A]
STVMIX_IOC_SETSCREENPARAMS
_NO_ERROR
Vioctl command [0X00001106]
STVMIX_IOC_ENABLE
ioctl command [0X00001110]
STVMIX_IOC_CONNECTLAYERS
MIX[1]_SetTimeBase=ST_NO_ERROR
VMIX_SetScreenParams(VMIX_AUX, 132,46,720,576, 50000,1,1 )
VMIX enabled!
ioctl command [0X00001110]
STVMIX_IOC_CONNECTLAYERS
VIDEO_USED: 1
UTILS: ioctl command 10 [0x00007e0a]=3)
Type:2
Setting pointers for PTI injection...
GetWriteAdd K&:c0579aa0
InformReadAdd K&:c0579a80
Setup STVID_SETUP_ACCESS 00000002
Open Read/Write
FRAME_BUFFERS_PAioctl command [0X00001100]
RTITIioctl command [0X00001102]
ON in LMIACCESS 00000002
Open Read/Write
ioctl command [0X00006500]
_VID
Setup ioctl command [0X00006502]
ioctl command [0X00006505]
STVID_SETUP_DECIioctl command [0X00006506]
UTILS: ioctl command 7 [0x00007e07]
UTILS_IOC_READREGISTER: at Register_p b9001000
MATED_FRAME_BUFFERS_PARTITION in LMI_VID
VID_OpenViewPort(MAIN_VID,LAYER_VIDEO1)=ST_NO_ERROR
VID_OpenViewPort(MAIN_VID,LAYER_VIDEO2)=ST_NO_ERROR
STVID_DisableFrameRateConversion() Success
STPTI_BufferSetOverflowControl()=ST_NO_ERROR
VID_SetDataInputInterface=ST_NO_ERROR
UTILS_GetKernelInjectionFunctionPointers()=ST_NO_ERROR
STVID_SetDataInputInterface()=ST_NO_ERROR
STHDMI_Init()=0
STHDMI_Open=ST_NO_ERROR
CC_Setup(ClosedCaption)=ST_NO_ERROR
AUD_Setup(MAIN_AUDIO)=0
Close
Segmentation fault