rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
[ 0.000000] BIOS-e820: 000000003f690000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f65d0
[ 0.000000] Entering add_active_range(0, 0, 259728) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259728
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259728
[ 0.000000] On node 0 totalpages: 259728
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30115 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6540 checksum 0
[ 0.000000] ACPI: RSDP 000F6540, 0024 (r2 LENOVO)
[ 0.000000] ACPI: XSDT 3F693C03, 0084 (r1 PTLTD XSDT 35 LTP 0)
[ 0.000000] ACPI: FACP 3F699D6E, 00F4 (r3 INTEL CALISTGA 35 ALAN 1)
[ 0.000000] ACPI: DSDT 3F6959A0, 435A (r1 LENOVO TP-61 35 INTL 20050624)
[ 0.000000] ACPI: FACS 3F69AFC0, 0040
[ 0.000000] ACPI: APIC 3F699E62, 0068 (r1 INTEL CALISTGA 35 LOHR 5A)
[ 0.000000] ACPI: HPET 3F699ECA, 0038 (r1 INTEL CALISTGA 35 LOHR 5A)
[ 0.000000] ACPI: MCFG 3F699F02, 003C (r1 INTEL CALISTGA 35 LOHR 5A)
[ 0.000000] ACPI: TCPA 3F699F3E, 0032 (r1 Phoeni x 35 TL 0)
[ 0.000000] ACPI: APIC 3F699F70, 0068 (r1 PTLTD APIC 35 LTP 0)
[ 0.000000] ACPI: BOOT 3F699FD8, 0028 (r1 PTLTD $SBFTBL$ 35 LTP 1)
[ 0.000000] ACPI: SSDT 3F695351, 064F (r1 SataRe SataPri 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F694CBF, 0692 (r1 SataRe SataSec 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F694235, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F69418F, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F693C87, 0508 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 257699
[ 0.000000] Kernel command line: root=UUID=e38ac84d-4eb7-47c9-8bdc-59b108376c85 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1662.557 MHz processor.
[ 14.386233] Console: colour VGA+ 80x25
[ 14.386507] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 14.387038] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 14.435170] Memory: 1018304k/1038912k available (2015k kernel code, 19880k reserved, 916k data, 364k init, 121408k highmem)
[ 14.435187] virtual kernel memory layout:
[ 14.435189] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 14.435191] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 14.435194] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 14.435196] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 14.435198] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 14.435200] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 14.435203] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 14.435209] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 14.435261] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 14.435415] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 14.435423] hpet0: 3 64-bit timers, 14318180 Hz
[ 14.516324] Calibrating delay using timer specific routine.. 3329.43 BogoMIPS (lpj=6658868)
[ 14.516355] Security Framework v1.0.0 initialized
[ 14.516365] SELinux: Disabled at boot.
[ 14.516388] Mount-cache hash table entries: 512
[ 14.516554] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[ 14.516566] monitor/mwait feature present.
[ 14.516570] using mwait in idle threads.
[ 14.516577] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 14.516582] CPU: L2 cache: 2048K
[ 14.516586] CPU: Physical Processor ID: 0
[ 14.516589] CPU: Processor Core ID: 0
[ 14.516593] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
[ 14.516606] Compat vDSO mapped to ffffe000.
[ 14.516625] Checking 'hlt' instruction... OK.
[ 14.532466] SMP alternatives: switching to UP code
[ 14.533128] Early unpacking initramfs... done
[ 15.107402] ACPI: Core revision 20070126
[ 15.107501] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 15.141370] CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
[ 15.141397] SMP alternatives: switching to SMP code
[ 15.141541] Booting processor 1/1 eip 3000
[ 15.151919] Initializing CPU#1
[ 15.231219] Calibrating delay using timer specific routine.. 3325.11 BogoMIPS (lpj=6650235)
[ 15.231231] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[ 15.231239] monitor/mwait feature present.
[ 15.231244] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 15.231248] CPU: L2 cache: 2048K
[ 15.231251] CPU: Physical Processor ID: 0
[ 15.231254] CPU: Processor Core ID: 1
[ 15.231257] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000
[ 15.232082] CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
[ 15.232118] Total of 2 processors activated (6654.55 BogoMIPS).
[ 15.232325] ENABLING IO-APIC IRQs
[ 15.232562] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 15.379125] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 15.399117] Brought up 2 CPUs
[ 15.498265] migration_cost=44
[ 15.498463] Booting paravirtualized kernel on bare hardware
[ 15.498568] Time: 23:13:14 Date: 10/12/107
[ 15.498598] NET: Registered protocol family 16
[ 15.498725] EISA bus registered
[ 15.498732] ACPI: bus type pci registered
[ 15.498900] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=5
[ 15.498904] PCI: Using configuration type 1
[ 15.498907] Setting up standard PCI resources
[ 15.505489] ACPI: EC: Look up EC in DSDT
[ 15.506605] ACPI: EC: GPE=0x19, ports=0x66, 0x62
[ 15.508880] ACPI: System BIOS is requesting _OSI(Linux)
[ 15.508884] ACPI: Please test with "acpi_osi=!Linux"
[ 15.508887] Please send dmidecode to linux-acpi@vger.kernel.org
[ 15.509628] ACPI: Interpreter enabled
[ 15.509632] ACPI: (supports S0 S3 S4 S5)
[ 15.509660] ACPI: Using IOAPIC for interrupt routing
[ 15.556181] ACPI: EC: GPE=0x19, ports=0x66, 0x62
[ 15.556266] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 15.556278] PCI: Probing PCI hardware (bus 00)
[ 15.557169] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 15.557176] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 15.558498] PCI: Transparent bridge - 0000:00:1e.0
[ 15.558654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 15.559202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 15.559418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 15.559654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 15.569347] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 15.569510] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 15.569669] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 15.569827] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 15.569993] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 15.570152] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 15.570310] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 15.570468] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 15.570654] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 15.570670] pnp: PnP ACPI init
[ 15.570681] ACPI: bus type pnp registered
[ 15.590955] pnp: PnP ACPI: found 11 devices
[ 15.590959] ACPI: ACPI bus type pnp unregistered
[ 15.590965] PnPBIOS: Disabled by ACPI PNP
[ 15.591033] PCI: Using ACPI for IRQ routing
[ 15.591037] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 15.615224] NET: Registered protocol family 8
[ 15.615227] NET: Registered protocol family 20
[ 15.615308] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 15.615314] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 15.615320] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 15.615326] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 15.615342] pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
[ 15.615347] pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 15.618628] Time: tsc clocksource has been installed.
[ 15.618649] Switched to high resolution mode on CPU 0
[ 15.618772] Switched to high resolution mode on CPU 1
[ 15.645791] PCI: Bridge: 0000:00:1c.0
[ 15.645794] IO window: disabled.
[ 15.645802] MEM window: disabled.
[ 15.645808] PREFETCH window: disabled.
[ 15.645816] PCI: Bridge: 0000:00:1c.1
[ 15.645819] IO window: disabled.
[ 15.645827] MEM window: d0000000-d00fffff
[ 15.645833] PREFETCH window: disabled.
[ 15.645850] PCI: Bus 6, cardbus bridge: 0000:05:04.0
[ 15.645854] IO window: 00002400-000024ff
[ 15.645862] IO window: 00002800-000028ff
[ 15.645869] PREFETCH window: 50000000-53ffffff
[ 15.645876] MEM window: 54000000-57ffffff
[ 15.645883] PCI: Bridge: 0000:00:1e.0
[ 15.645888] IO window: 2000-2fff
[ 15.645896] MEM window: d0100000-d01fffff
[ 15.645903] PREFETCH window: 50000000-53ffffff
[ 15.645940] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 15.645951] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 15.645981] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
[ 15.645990] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 15.646006] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
[ 15.646015] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 15.646036] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 15.646058] NET: Registered protocol family 2
[ 15.694493] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 15.694568] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 15.696319] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 15.696937] TCP: Hash tables configured (established 131072 bind 65536)
[ 15.696941] TCP reno registered
[ 15.710651] checking if image is initramfs... it is
[ 16.855963] Freeing initrd memory: 7039k freed
[ 16.856106] Simple Boot Flag at 0x36 set to 0x1
[ 16.856907] audit: initializing netlink socket (disabled)
[ 16.856929] audit(1194909194.036:1): initialized
[ 16.857074] highmem bounce pool size: 64 pages
[ 16.860369] VFS: Disk quotas dquot_6.5.1
[ 16.860449] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 16.860595] io scheduler noop registered
[ 16.860599] io scheduler anticipatory registered
[ 16.860602] io scheduler deadline registered
[ 16.860626] io scheduler cfq registered (default)
[ 16.860647] Boot video device is 0000:00:02.0
[ 16.860881] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.860953] assign_interrupt_mode Found MSI capability
[ 16.860958] Allocate Port Service[0000:00:1c.0:pcie00]
[ 16.861018] Allocate Port Service[0000:00:1c.0:pcie02]
[ 16.861153] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 16.861223] assign_interrupt_mode Found MSI capability
[ 16.861227] Allocate Port Service[0000:00:1c.1:pcie00]
[ 16.861279] Allocate Port Service[0000:00:1c.1:pcie02]
[ 16.861520] isapnp: Scanning for PnP cards...
[ 17.214962] isapnp: No Plug & Play device found
[ 17.252991] Real Time Clock Driver v1.12ac
[ 17.253308] hpet_resources: 0xfed00000 is busy
[ 17.253351] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.255110] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 17.255309] input: Macintosh mouse button emulation as /class/input/input0
[ 17.255436] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 17.279131] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 17.301371] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 17.301379] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 17.301384] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 17.301389] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 17.301394] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 17.301675] mice: PS/2 mouse device common for all mice
[ 17.304124] EISA: Probing bus 0 at eisa.0
[ 17.304134] Cannot allocate resource for EISA slot 1
[ 17.304139] Cannot allocate resource for EISA slot 2
[ 17.304173] EISA: Detected 0 cards.
[ 17.304302] TCP cubic registered
[ 17.304322] NET: Registered protocol family 1
[ 17.304354] Using IPI No-Shortcut mode
[ 17.304588] Magic number: 15:540:251
[ 17.304617] hash matches device ttyw7
[ 17.304629] hash matches device ttyta
[ 17.304954] Freeing unused kernel memory: 364k freed
[ 17.327973] input: AT Translated Set 2 keyboard as /class/input/input1
[ 18.638516] AppArmor: AppArmor initialized<5>audit(1194909196.036:2): type=1505 info="AppArmor initialized" pid=1226
[ 18.647986] fuse init (API version 7.8)
[ 18.654987] Failure registering capabilities with primary security module.
[ 18.698190] ACPI: SSDT 3F694A01, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 18.698880] ACPI: SSDT 3F694494, 04E8 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 18.716482] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 18.716490] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 18.716905] ACPI: SSDT 3F694BF7, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 18.717242] ACPI: SSDT 3F69497C, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 18.726160] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 18.726168] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 18.733730] ACPI Exception (thermal-0400): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
[ 4.156000] Marking TSC unstable due to: possible TSC halt in C2.
[ 4.156000] ACPI: Thermal Zone [TZ00] (53 C)
[ 4.160000] Time: hpet clocksource has been installed.
[ 4.892000] usbcore: registered new interface driver usbfs
[ 4.892000] usbcore: registered new interface driver hub
[ 4.892000] usbcore: registered new device driver usb
[ 4.892000] USB Universal Host Controller Interface driver v3.0
[ 4.892000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 4.892000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 4.892000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.896000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 4.896000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820
[ 4.896000] usb usb1: configuration #1 chosen from 1 choice
[ 4.896000] hub 1-0:1.0: USB hub found
[ 4.896000] hub 1-0:1.0: 2 ports detected
[ 4.984000] SCSI subsystem initialized
[ 4.992000] libata version 2.21 loaded.
[ 5.000000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 5.000000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 5.000000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.000000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 5.000000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 5.000000] usb usb2: configuration #1 chosen from 1 choice
[ 5.000000] hub 2-0:1.0: USB hub found
[ 5.000000] hub 2-0:1.0: 2 ports detected
[ 5.040000] 8139too Fast Ethernet driver 0.9.28
[ 5.108000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 5.108000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 5.108000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.108000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 5.108000] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
[ 5.108000] usb usb3: configuration #1 chosen from 1 choice
[ 5.108000] hub 3-0:1.0: USB hub found
[ 5.108000] hub 3-0:1.0: 2 ports detected
[ 5.212000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
[ 5.212000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 5.212000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.212000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 5.212000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
[ 5.212000] usb usb4: configuration #1 chosen from 1 choice
[ 5.212000] hub 4-0:1.0: USB hub found
[ 5.212000] hub 4-0:1.0: 2 ports detected
[ 5.244000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 5.320000] ata_piix 0000:00:1f.2: version 2.11
[ 5.320000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 5.408000] usb 1-2: configuration #1 chosen from 1 choice
[ 5.476000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 5.476000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 5.476000] scsi0 : ata_piix
[ 5.476000] scsi1 : ata_piix
[ 5.476000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
[ 5.476000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
[ 5.640000] ata1.00: ATA-6: TOSHIBA MK8032GSX, AS113E, max UDMA/100
[ 5.640000] ata1.00: 156301488 sectors, multi 16: LBA48
[ 5.648000] ata1.00: configured for UDMA/100
[ 5.652000] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 5.816000] usb 3-2: configuration #1 chosen from 1 choice
[ 5.968000] ata2.00: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HA01, max UDMA/33
[ 6.140000] ata2.00: configured for UDMA/33
[ 6.140000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8032GS AS11 PQ: 0 ANSI: 5
[ 6.144000] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HA01 PQ: 0 ANSI: 5
[ 6.144000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 6.144000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 6.144000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.144000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 6.144000] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.144000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 6.144000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd0544000
[ 6.148000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 6.148000] usb usb5: configuration #1 chosen from 1 choice
[ 6.148000] hub 5-0:1.0: USB hub found
[ 6.148000] hub 5-0:1.0: 8 ports detected
[ 6.160000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 6.160000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.160000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.160000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.160000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 6.160000] sd 0:0:0:0: [sda] Write Protect is off
[ 6.160000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.160000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.160000] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 6.220000] usb 3-2: USB disconnect, address 2
[ 6.220000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.224000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.224000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.240000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.240000] Uniform CD-ROM driver Revision: 3.20
[ 6.240000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.252000] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 6.252000] PCI: Setting latency timer of device 0000:05:01.0 to 64
[ 6.252000] eth0: RealTek RTL8139 at 0xf886a000, 00:0f:b0:cc:15:82, IRQ 21
[ 6.252000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 6.252000] PCI: Enabling device 0000:05:06.0 (0000 -> 0002)
[ 6.252000] ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 6.256000] PCI: Setting latency timer of device 0000:05:06.0 to 64
[ 6.256000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 6.308000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[d0100800-d0100fff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 6.632000] Attempting manual resume
[ 6.632000] swsusp: Resume From Partition 8:5
[ 6.632000] PM: Checking swsusp image.
[ 6.632000] PM: Resume from disk failed.
[ 6.652000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 6.652000] EXT3-fs: write access will be enabled during recovery.
[ 6.852000] usb 1-2: USB disconnect, address 2
[ 7.092000] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 7.264000] usb 1-2: configuration #1 chosen from 1 choice
[ 7.508000] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 7.584000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f688f401d90]
[ 7.672000] usb 3-2: configuration #1 chosen from 1 choice
[ 17.864000] kjournald starting. Commit interval 5 seconds
[ 17.864000] EXT3-fs: sda3: orphan cleanup on readonly fs
[ 17.864000] ext3_orphan_cleanup: deleting unreferenced inode 869643
[ 17.880000] ext3_orphan_cleanup: deleting unreferenced inode 835604
[ 17.896000] EXT3-fs: sda3: 2 orphan inodes deleted
[ 17.900000] EXT3-fs: recovery complete.
[ 17.932000] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.844000] Linux agpgart interface v0.102 (c) Dave Jones
[ 26.148000] agpgart: Detected an Intel 945GM Chipset.
[ 26.152000] agpgart: Detected 7932K stolen memory.
[ 26.168000] agpgart: AGP aperture is 256M @ 0xc0000000
[ 26.168000] intel_rng: FWH not detected
[ 26.188000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 26.192000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 26.620000] iTCO_vendor_support: vendor-support=0
[ 26.636000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 27.184000] ieee80211_crypt: registered algorithm 'NULL'
[ 27.184000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04753/0x200000
[ 27.216000] Yenta: CardBus bridge found at 0000:05:04.0 [17aa:2075]
[ 27.216000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 27.216000] Yenta: Routing CardBus interrupts to PCI
[ 27.216000] Yenta TI: socket 0000:05:04.0, mfunc 0x01111c12, devctl 0x44
[ 27.252000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 27.260000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 27.260000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 27.272000] Bluetooth: Core ver 2.11
[ 27.272000] NET: Registered protocol family 31
[ 27.272000] Bluetooth: HCI device and connection manager initialized
[ 27.272000] Bluetooth: HCI socket layer initialized
[ 27.284000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 27.284000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 27.344000] Bluetooth: HCI USB driver ver 2.9
[ 27.348000] usbcore: registered new interface driver hci_usb
[ 27.408000] sdhci: Secure Digital Host Controller Interface driver
[ 27.408000] sdhci: Copyright(c) Pierre Ossman
[ 27.448000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[ 27.448000] Socket status: 30000006
[ 27.448000] Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09
[ 27.448000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 27.448000] cs: IO port probe 0x2000-0x2fff: clean.
[ 27.448000] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff
[ 27.448000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 27.448000] sdhci: SDHCI controller found at 0000:05:06.1 [1180:0822] (rev 19)
[ 27.448000] PCI: Enabling device 0000:05:06.1 (0000 -> 0002)
[ 27.448000] ACPI: PCI Interrupt 0000:05:06.1[B] -> GSI 23 (level, low) -> IRQ 18
[ 27.448000] PCI: Setting latency timer of device 0000:05:06.1 to 64
[ 27.448000] mmc0: SDHCI at 0xd0100400 irq 18 DMA
[ 27.484000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[ 27.484000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 27.516000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 27.516000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 27.576000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 27.884000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 27.884000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 27.964000] cs: IO port probe 0x100-0x3af: clean.
[ 27.968000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 27.968000] cs: IO port probe 0x820-0x8ff: clean.
[ 27.968000] cs: IO port probe 0xc00-0xcf7: clean.
[ 27.968000] cs: IO port probe 0xa00-0xaff: clean.
[ 28.512000] lp: driver loaded but no devices found
[ 28.672000] Adding 690752k swap on /dev/sda5. Priority:-1 extents:1 across:690752k
[ 28.912000] EXT3 FS on sda3, internal journal
[ 29.476000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
[ 30.420000] ACPI: AC Adapter [ACAD] (on-line)
[ 30.444000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 30.444000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 30.472000] No dock devices found.
[ 30.584000] ACPI: Battery Slot [BAT1] (battery present)
[ 30.624000] input: Power Button (FF) as /class/input/input3
[ 30.624000] ACPI: Power Button (FF) [PWRF]
[ 30.624000] input: Lid Switch as /class/input/input4
[ 30.624000] ACPI: Lid Switch [LID0]
[ 30.624000] input: Power Button (CM) as /class/input/input5
[ 30.624000] ACPI: Power Button (CM) [PWRB]
[ 32.124000] NET: Registered protocol family 10
[ 32.128000] lo: Disabled Privacy Extensions
[ 32.640000] ppdev: user-space parallel port driver
[ 32.720000] eth0: link down
[ 32.724000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.808000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 32.868000] audit(1194927225.345:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5120 profile="/usr/sbin/cupsd"
[ 32.940000] apm: BIOS not found.
[ 33.140000] Failure registering capabilities with primary security module.
[ 33.332000] Bluetooth: L2CAP ver 2.8
[ 33.332000] Bluetooth: L2CAP socket layer initialized
[ 33.420000] Bluetooth: RFCOMM socket layer initialized
[ 33.420000] Bluetooth: RFCOMM TTY layer initialized
[ 33.420000] Bluetooth: RFCOMM ver 1.8
[ 37.924000] [drm] Initialized drm 1.1.0 20060810
[ 37.924000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 37.924000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 70.644000] NET: Registered protocol family 17
[ 73.772000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 74.820000] ieee80211_crypt: registered algorithm 'TKIP'
[ 89.712000] eth1: no IPv6 routers present