Miscellany

DANUBE # setenv bootcmd bootm B0030000
DANUBE # setenv update_image tftpboot \$(tftp_loadaddr) danube-image \;erase 1:10-100 \;cp.b \$(tftp_loadaddr) B0030000 \$(f)
DANUBE # saveenv
Saving Environment to Flash...
Protect off B03F9000 ... B03F9BFF
Un-Protected 1 sectors
Erasing Flash...
 done
Partial erased from 0xb03f9000 to 0xb03f9bff
Writing to Flash... done
Protected 1 sectors
DANUBE # reset�
ROM VER: 1.0.3
CFG 01
Read EEPROMX
 X


U-Boot 1.1.5-LXDB (Feb 27 2007 - 21:39:14)

DRAM:  32 MB

 relocate_code start
 relocate code finish.
Flash:  8 MB
In:    serial
Out:   serial
Err:   serial
Net:   ethaddr=08:01:11:11:11:11
danube Switch

Type "run flash_nfs" to mount root filesystem over NFS

Hit any key to stop autoboot:  0
## Booting image at b0030000 ...
Bad Magic Number
DANUBE # run update_image
Using danube Switch device
TFTP from server 10.10.10.123; our IP address is 10.10.10.10
Filename 'uImage'.
Load address: 0xda
Loading: #################################################################
         #################################################################
         #############################
done
Bytes transferred = 812988 (c67bc hex)
Erase Flash Sectors 10-100 in Bank # 1
........................................................ done
Usage:
cp      - memory copy

DANUBE # run bootcmd
## Booting image at b0030000 ...
Bad Magic Number