rendered paste body!!################################
!!ALSA Information Script v 0.4.34
!!################################
!!Script ran on: Sun Nov 11 16:50:15 CST 2007
!!Linux Distribution
!!------------------
Ubuntu 7.10 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 7.10"
!!Kernel Information
!!------------------
Kernel release: 2.6.22-14-generic
Operating System: GNU/Linux
Architecture: i686
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.14
Library version:
Utilities version: 1.0.14
!!Loaded ALSA modules
!!-------------------
snd_mpu401
!!Soundcards recognised by ALSA
!!-----------------------------
1 [UART ]: MPU-401 UART - MPU-401 UART
MPU-401 UART at 0x330, irq 10
!!PCI Soundcards installed in the system
!!--------------------------------------
00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio (rev c2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce Audio (rev c2)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's
!!--------------------------------------------------------
00:05.0 0401: 10de:01b0 (rev c2)
Subsystem: 10de:0c11
--
00:06.0 0401: 10de:01b1 (rev c2)
Subsystem: 10de:8384
!!Modprobe options (Sound related)
!!--------------------------------
snd-bt87x: index=-2
snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-usb-audio: index=-2
snd-usb-usx2y: index=-2
snd-usb-caiaq: index=-2
snd-cmipci: mpu_port=0x330 fm_port=0x388
!!Loaded sound module options
!!--------------------------
!!Module: snd_mpu401
enable : Y,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
index : -2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2
irq : 10,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535
pnp : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
port : 816,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
uart_enter : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
!!ALSA Device nodes
!!-----------------
crw-rw---- 1 root audio 116, 5 2007-11-11 13:37 /dev/snd/controlC1
crw-rw---- 1 root audio 116, 4 2007-11-11 13:37 /dev/snd/midiC1D0
crw-rw---- 1 root audio 116, 3 2007-11-11 13:37 /dev/snd/seq
crw-rw---- 1 root audio 116, 2 2007-11-11 13:37 /dev/snd/timer
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
ARECORD
**** List of CAPTURE Hardware Devices ****
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 ]
Usage: amixer <options> [command]
Available options:
-h,--help this help
-c,--card N select the card
-D,--device N select the device, default 'default'
-d,--debug debug mode
-n,--nocheck do not perform range checking
-v,--version print version of this program
-q,--quiet be quiet
-i,--inactive show also inactive controls
-a,--abstract L select abstraction level (none or basic)
-s,--stdin Read and execute commands from stdin sequentially
Available commands:
scontrols show all mixer simple controls
scontents show contents of all mixer simple controls (default command)
sset sID P set contents for one mixer simple control
sget sID get contents for one mixer simple control
controls show all controls for given card
contents show contents of all controls for given card
cset cID P set control contents for one control
cget cID get control contents for one control
!!All Loaded Modules
!!------------------
Module
nls_iso8859_1
nls_cp437
vfat
fat
ipv6
af_packet
binfmt_misc
radeon
drm
vboxdrv
ppdev
cpufreq_powersave
cpufreq_stats
cpufreq_userspace
cpufreq_ondemand
cpufreq_conservative
freq_table
video
container
sbs
button
dock
ac
battery
lp
snd_intel8x0
snd_ac97_codec
ac97_bus
snd_pcm_oss
snd_mixer_oss
snd_pcm
sg
snd_seq_dummy
snd_seq_oss
snd_mpu401
snd_mpu401_uart
snd_seq_midi
snd_rawmidi
sd_mod
snd_seq_midi_event
snd_seq
snd_timer
snd_seq_device
analog
gameport
pcspkr
snd
soundcore
parport_pc
parport
shpchp
pci_hotplug
snd_page_alloc
nvidia_agp
agpgart
i2c_amd756
i2c_core
evdev
reiserfs
ide_cd
cdrom
ide_disk
8139cp
usb_storage
libusual
amd74xx
ide_core
usbhid
hid
8139too
mii
floppy
ata_generic
libata
scsi_mod
forcedeth
ohci_hcd
usbcore
thermal
processor
fan
fuse
apparmor
commoncap
CPU0
0: 159 IO-APIC-edge timer
1: 10314 IO-APIC-edge i8042
6: 5 IO-APIC-edge floppy
7: 0 IO-APIC-edge parport0
8: 3 IO-APIC-edge rtc
9: 0 IO-APIC-fasteoi acpi
10: 0 IO-APIC-edge MPU401 UART
14: 75391 IO-APIC-edge ide0
15: 213548 IO-APIC-edge ide1
16: 156511 IO-APIC-fasteoi ohci_hcd:usb1, ohci_hcd:usb2
17: 1195454 IO-APIC-fasteoi eth0
18: 422401 IO-APIC-fasteoi eth1
20: 723893 IO-APIC-fasteoi radeon@pci:0000:02:00.0
NMI: 0
LOC: 2646350
ERR: 0
MIS: 0
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000080000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002ffec000 (usable)
[ 0.000000] BIOS-e820: 000000002ffec000 - 000000002ffef000 (ACPI data)
[ 0.000000] BIOS-e820: 000000002ffef000 - 000000002ffff000 (reserved)
[ 0.000000] BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 767MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 196588) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 196588
[ 0.000000] HighMem 196588 -> 196588
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 196588
[ 0.000000] On node 0 totalpages: 196588
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1503 pages used for memmap
[ 0.000000] Normal zone: 190989 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7CE0 checksum 0
[ 0.000000] ACPI: RSDP 000F7CE0, 0014 (r0 ASUS )
[ 0.000000] ACPI: RSDT 2FFEC000, 0030 (r1 ASUS A7N266VM 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 2FFEC100, 0074 (r1 ASUS A7N266VM 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 2FFEC180, 2A22 (r1 ASUS A7N266VM 1000 MSFT 100000B)
[ 0.000000] ACPI: FACS 2FFFF000, 0040
[ 0.000000] ACPI: BOOT 2FFEC040, 0028 (r1 ASUS A7N266VM 42302E31 MSFT 31313031)
[ 0.000000] ACPI: APIC 2FFEC080, 005A (r1 ASUS A7N266VM 42302E31 MSFT 31313031)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:6 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[ 0.000000] Built 1 zonelists. Total pages: 195053
[ 0.000000] Kernel command line: root=UUID=d4727ef0-a9d5-4313-a7d9-1cf74a93866c ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1670.473 MHz processor.
[ 11.936790] Console: colour VGA+ 80x25
[ 11.937652] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 11.939160] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 11.962761] Memory: 767504k/786352k available (2015k kernel code, 18152k reserved, 916k data, 364k init, 0k highmem)
[ 11.962774] virtual kernel memory layout:
[ 11.962775] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 11.962777] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 11.962778] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
[ 11.962780] lowmem : 0xc0000000 - 0xeffec000 ( 767 MB)
[ 11.962782] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 11.962783] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 11.962785] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 11.962789] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 11.962840] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 12.042866] Calibrating delay using timer specific routine.. 3343.66 BogoMIPS (lpj=6687334)
[ 12.042902] Security Framework v1.0.0 initialized
[ 12.042910] SELinux: Disabled at boot.
[ 12.042930] Mount-cache hash table entries: 512
[ 12.043095] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 12.043106] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 12.043109] CPU: L2 Cache: 256K (64 bytes/line)
[ 12.043112] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 12.043125] Compat vDSO mapped to ffffe000.
[ 12.043140] Checking 'hlt' instruction... OK.
[ 12.059028] SMP alternatives: switching to UP code
[ 12.059342] Freeing SMP alternatives: 11k freed
[ 12.059791] Early unpacking initramfs... done
[ 12.447043] ACPI: Core revision 20070126
[ 12.447146] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 12.448591] CPU0: AMD Athlon(TM) XP 2000+ stepping 02
[ 12.448617] Total of 1 processors activated (3343.66 BogoMIPS).
[ 12.448799] ENABLING IO-APIC IRQs
[ 12.448998] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 12.594974] Brought up 1 CPUs
[ 12.595132] Booting paravirtualized kernel on bare hardware
[ 12.595209] Time: 13:36:58 Date: 10/11/107
[ 12.595247] NET: Registered protocol family 16
[ 12.595375] EISA bus registered
[ 12.595390] ACPI: bus type pci registered
[ 12.596364] PCI: PCI BIOS revision 2.10 entry at 0xf1a70, last bus=2
[ 12.596368] PCI: Using configuration type 1
[ 12.596369] Setting up standard PCI resources
[ 12.605576] ACPI: EC: Look up EC in DSDT
[ 12.608991] ACPI: Interpreter enabled
[ 12.608995] ACPI: (supports S0 S1 S4 S5)
[ 12.609013] ACPI: Using IOAPIC for interrupt routing
[ 12.616980] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.616993] PCI: Probing PCI hardware (bus 00)
[ 12.617837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.617943] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 12.618152] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 12.620830] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 18) *5
[ 12.621014] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 18) *0, disabled.
[ 12.621192] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 18) *0, disabled.
[ 12.621369] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 18) *0, disabled.
[ 12.621549] ACPI: PCI Interrupt Link [LNKE] (IRQs 19) *11
[ 12.621726] ACPI: PCI Interrupt Link [LNKF] (IRQs 20 21 22) *5
[ 12.621904] ACPI: PCI Interrupt Link [LNKU] (IRQs 20 21 22) *5
[ 12.622088] ACPI: PCI Interrupt Link [LNKI] (IRQs 20 21 22) *5
[ 12.622265] ACPI: PCI Interrupt Link [LNKJ] (IRQs 20 21 22) *5
[ 12.622491] ACPI: PCI Interrupt Link [LNKK] (IRQs 20 21 22) *11
[ 12.622714] ACPI: PCI Interrupt Link [LNKM] (IRQs 20 21 22) *0, disabled.
[ 12.622816] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.622831] pnp: PnP ACPI init
[ 12.622845] ACPI: bus type pnp registered
[ 12.629134] pnp: PnP ACPI: found 17 devices
[ 12.629138] ACPI: ACPI bus type pnp unregistered
[ 12.629144] PnPBIOS: Disabled by ACPI PNP
[ 12.629219] PCI: Using ACPI for IRQ routing
[ 12.629224] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 12.636034] NET: Registered protocol family 8
[ 12.636037] NET: Registered protocol family 20
[ 12.636130] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 12.636134] pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 12.636138] pnp: 00:00: iomem range 0x100000-0x2fffffff could not be reserved
[ 12.636142] pnp: 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 12.636150] pnp: 00:02: ioport range 0xe400-0xe4fe has been reserved
[ 12.636153] pnp: 00:02: ioport range 0xe4ff-0xe4ff has been reserved
[ 12.636156] pnp: 00:02: ioport range 0xcf0-0xcf3 has been reserved
[ 12.636160] pnp: 00:02: iomem range 0xffc00000-0xffffffff could not be reserved
[ 12.636176] pnp: 00:0e: ioport range 0x370-0x371 has been reserved
[ 12.638920] Time: tsc clocksource has been installed.
[ 12.666561] PCI: Bridge: 0000:00:08.0
[ 12.666564] IO window: b000-bfff
[ 12.666571] MEM window: dd000000-dd7fffff
[ 12.666574] PREFETCH window: disabled.
[ 12.666580] PCI: Bridge: 0000:00:1e.0
[ 12.666583] IO window: 9000-9fff
[ 12.666588] MEM window: dc000000-dcffffff
[ 12.666592] PREFETCH window: e0000000-fbffffff
[ 12.666605] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 12.666611] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 12.666626] NET: Registered protocol family 2
[ 12.702996] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 12.703232] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 12.706426] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 12.707517] TCP: Hash tables configured (established 131072 bind 65536)
[ 12.707522] TCP reno registered
[ 12.719140] checking if image is initramfs... it is
[ 13.166974] Switched to high resolution mode on CPU 0
[ 13.451660] Freeing initrd memory: 7334k freed
[ 13.451817] Simple Boot Flag at 0x3f set to 0x1
[ 13.452254] audit: initializing netlink socket (disabled)
[ 13.452273] audit(1194788219.072:1): initialized
[ 13.454895] VFS: Disk quotas dquot_6.5.1
[ 13.454971] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.455107] io scheduler noop registered
[ 13.455110] io scheduler anticipatory registered
[ 13.455113] io scheduler deadline registered
[ 13.455130] io scheduler cfq registered (default)
[ 13.470888] Boot video device is 0000:02:00.0
[ 13.471147] isapnp: Scanning for PnP cards...
[ 13.825300] isapnp: No Plug & Play device found
[ 13.858136] Real Time Clock Driver v1.12ac
[ 13.858258] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 13.858371] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.858642] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 13.859450] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 13.859825] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 13.860820] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 13.861154] input: Macintosh mouse button emulation as /class/input/input0
[ 13.861258] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 13.861262] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 14.111241] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.111478] mice: PS/2 mouse device common for all mice
[ 14.111635] EISA: Probing bus 0 at eisa.0
[ 14.111665] Cannot allocate resource for EISA slot 5
[ 14.111681] EISA: Detected 0 cards.
[ 14.111812] TCP cubic registered
[ 14.111824] NET: Registered protocol family 1
[ 14.111850] Using IPI No-Shortcut mode
[ 14.112098] Magic number: 15:814:634
[ 14.112205] hash matches device ptycd
[ 14.112823] Freeing unused kernel memory: 364k freed
[ 14.158911] input: AT Translated Set 2 keyboard as /class/input/input1
[ 15.368055] AppArmor: AppArmor initialized<5>audit(1194788221.072:2): type=1505 info="AppArmor initialized" pid=1197
[ 15.376011] fuse init (API version 7.8)
[ 15.381918] Failure registering capabilities with primary security module.
[ 16.130708] usbcore: registered new interface driver usbfs
[ 16.130761] usbcore: registered new interface driver hub
[ 16.130793] usbcore: registered new device driver usb
[ 16.131779] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 16.132188] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 22
[ 16.132199] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKU] -> GSI 22 (level, high) -> IRQ 16
[ 16.132216] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 16.132220] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 16.132440] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 16.132465] ohci_hcd 0000:00:02.0: irq 16, io mem 0xdf800000
[ 16.184543] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 16.207008] SCSI subsystem initialized
[ 16.213153] libata version 2.21 loaded.
[ 16.253426] usb usb1: configuration #1 chosen from 1 choice
[ 16.253464] hub 1-0:1.0: USB hub found
[ 16.253480] hub 1-0:1.0: 3 ports detected
[ 16.354925] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKU] -> GSI 22 (level, high) -> IRQ 16
[ 16.354947] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 16.354951] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 16.354983] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 16.354999] ohci_hcd 0000:00:03.0: irq 16, io mem 0xdf000000
[ 16.360178] Floppy drive(s): fd0 is 1.44M
[ 16.412923] usb usb2: configuration #1 chosen from 1 choice
[ 16.412965] hub 2-0:1.0: USB hub found
[ 16.412986] hub 2-0:1.0: 3 ports detected
[ 16.421212] FDC 0 is a post-1991 82077
[ 16.433081] 8139too Fast Ethernet driver 0.9.28
[ 16.515392] ACPI: PCI Interrupt Link [LNKI] enabled at IRQ 21
[ 16.515406] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKI] -> GSI 21 (level, high) -> IRQ 17
[ 16.515415] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 16.658705] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 16.871869] usb 1-2: configuration #1 chosen from 1 choice
[ 17.034958] eth0: forcedeth.c: subsystem: 010de:0c11 bound to 0000:00:04.0
[ 17.040256] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 17.040264] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 17.041187] NFORCE: IDE controller at PCI slot 0000:00:09.0
[ 17.041218] NFORCE: chipset revision 195
[ 17.041222] NFORCE: not 100% native mode: will probe irqs later
[ 17.041228] NFORCE: BIOS didn't set cable bits correctly. Enabling workaround.
[ 17.041235] NFORCE: 0000:00:09.0 (rev c3) UDMA100 controller
[ 17.041247] ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA
[ 17.041259] ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:DMA
[ 17.041268] Probing IDE interface ide0...
[ 17.178667] usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 17.326776] hda: SAMSUNG SP0802N, ATA DISK drive
[ 17.488317] usb 2-2: configuration #1 chosen from 2 choices
[ 17.491432] usbcore: registered new interface driver hiddev
[ 17.499791] input: Logitech Trackball as /class/input/input2
[ 17.499819] input: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:02.0-2
[ 17.499844] usbcore: registered new interface driver usbhid
[ 17.499849] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 17.507410] usbcore: registered new interface driver libusual
[ 17.512529] Initializing USB Mass Storage driver...
[ 17.512739] scsi0 : SCSI emulation for USB Mass Storage devices
[ 17.512804] usb-storage: device found at 2
[ 17.512807] usb-storage: waiting for device to settle before scanning
[ 17.512831] usbcore: registered new interface driver usb-storage
[ 17.512834] USB Mass Storage support registered.
[ 17.606762] hdb: WDC WD400BB-00DGA0, ATA DISK drive
[ 17.664538] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 17.685969] Probing IDE interface ide1...
[ 18.422815] hdc: MAD DOG MD-16XDVD9, ATAPI CD/DVD-ROM drive
[ 19.206772] hdd: SAMSUNG CD-R/RW DRIVE SW-252F, ATAPI CD/DVD-ROM drive
[ 19.263045] ide1 at 0x170-0x177,0x376 on irq 15
[ 19.266371] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[ 19.266385] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKA] -> GSI 18 (level, high) -> IRQ 18
[ 19.267143] eth1: RealTek RTL8139 at 0xf083e000, 00:18:e7:16:52:e1, IRQ 18
[ 19.267147] eth1: Identified 8139 chip type 'RTL-8100B/8139D'
[ 19.269799] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 19.278775] hda: max request size: 512KiB
[ 19.300197] hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[ 19.300608] hda: cache flushes supported
[ 19.300676] hda: hda1
[ 19.303459] hdb: max request size: 128KiB
[ 19.304351] hdb: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
[ 19.304358] hdb: cache flushes not supported
[ 19.304405] hdb: hdb1 hdb2 < hdb5 > hdb3
[ 19.372665] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 19.372678] Uniform CD-ROM driver Revision: 3.20
[ 19.387519] hdd: ATAPI 1X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 19.752813] Attempting manual resume
[ 19.752818] swsusp: Resume From Partition 3:69
[ 19.752820] PM: Checking swsusp image.
[ 19.753020] PM: Resume from disk failed.
[ 19.764845] ReiserFS: hdb3: found reiserfs format "3.6" with standard journal
[ 19.764860] ReiserFS: hdb3: using ordered data mode
[ 19.777747] ReiserFS: hdb3: journal params: device hdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 19.779680] ReiserFS: hdb3: checking transaction log (hdb3)
[ 19.806310] ReiserFS: hdb3: Using r5 hash to sort names
[ 22.511512] usb-storage: device scan complete
[ 22.518491] scsi 0:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
[ 29.385716] Linux agpgart interface v0.102 (c) Dave Jones
[ 29.388191] agpgart: Detected NVIDIA nForce chipset
[ 29.392571] agpgart: AGP aperture is 32M @ 0xfc000000
[ 30.379746] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 30.382010] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 30.648691] parport_pc 00:0a: reported by Plug and Play ACPI
[ 30.648756] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 30.764031] input: PC Speaker as /class/input/input3
[ 31.245372] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 31.281373] sd 0:0:0:0: [sda] Write Protect is off
[ 31.281380] sd 0:0:0:0: [sda] Mode Sense: 68 00 00 08
[ 31.281384] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 31.327234] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 31.338694] sd 0:0:0:0: [sda] Write Protect is off
[ 31.338701] sd 0:0:0:0: [sda] Mode Sense: 68 00 00 08
[ 31.338705] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 31.338711] sda: sda1 sda2
[ 31.394539] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 31.406116] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 31.621385] PCI: Enabling device 0000:00:06.0 (0005 -> 0007)
[ 31.621734] ACPI: PCI Interrupt Link [LNKK] enabled at IRQ 20
[ 31.621745] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKK] -> GSI 20 (level, high) -> IRQ 19
[ 31.621773] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 33.721716] AC'97 0 does not respond - RESET
[ 33.721724] AC'97 0 access is not valid [0xffffffff], removing mixer.
[ 33.721733] Unable to initialize codec #0
[ 33.721794] ACPI: PCI interrupt for device 0000:00:06.0 disabled
[ 33.721806] Intel ICH: probe of 0000:00:06.0 failed with error -5
[ 33.974217] lp0: using parport0 (interrupt-driven).
[ 34.016175] Adding 506036k swap on /dev/hdb5. Priority:-1 extents:1 across:506036k
[ 43.833225] No dock devices found.
[ 43.928513] input: Power Button (FF) as /class/input/input4
[ 43.934585] ACPI: Power Button (FF) [PWRF]
[ 43.977463] input: Power Button (CM) as /class/input/input5
[ 43.983416] ACPI: Power Button (CM) [PWRB]
[ 45.509939] ppdev: user-space parallel port driver
[ 45.590641] eth0: no link during initialization.
[ 45.667499] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 45.676915] audit(1194809851.802:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4828 profile="/usr/sbin/cupsd"
[ 45.731273] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 45.731281] apm: overridden by ACPI.
[ 51.139132] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 51.139140] vboxdrv: Successfully done.
[ 51.598746] Failure registering capabilities with primary security module.
[ 53.445470] [drm] Initialized drm 1.1.0 20060810
[ 53.476442] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19
[ 53.476458] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKE] -> GSI 19 (level, high) -> IRQ 20
[ 53.480489] [drm] Initialized radeon 1.27.0 20060524 on minor 0
[ 55.613158] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 55.613296] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 55.613438] agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
[ 55.968816] [drm] Setting GART location based on new memory map
[ 55.968832] [drm] Loading R200 Microcode
[ 55.968880] [drm] writeback test succeeded in 1 usecs
[ 56.321590] NET: Registered protocol family 17
[ 61.464376] NET: Registered protocol family 10
[ 61.464610] lo: Disabled Privacy Extensions
[ 61.464934] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 72.191524] eth1: no IPv6 routers present