Note: ath0 does not actually work, and the axe0 was a USB nic I used to upload
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M processor 900MHz (632.59-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 527958016 (503 MB)
avail memory = 494665728 (471 MB)
ACPI APIC Table: <A M I OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> port 0xec00-0xec07 mem 0xf7f00000-0xf7f7ffff,0xd0000000-0xdfffffff,0xf7ec0000-0xf7efffff irq 16 at device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <display> at device 2.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib2
pci3: <network, ethernet> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci1: <ACPI PCI bus> on pcib3
ath0: <Atheros 5424> mem 0xfbef0000-0xfbefffff irq 18 at device 0.0 on pci1
ath0: unable to attach hardware; HAL status 13
device_attach: ath0 attach returned 6
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xe400-0xe41f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xe480-0xe49f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xe800-0xe81f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xe880-0xe89f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xf7eb7c00-0xf7eb7fff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: ENE UB6225, rev 2.00/1.00, addr 2
ugen0: vendor 0xeb1a product 0x2761, rev 2.00/8.21, addr 3
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xd07ff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 632587695 Hz quality 800
Timecounters tick every 1.000 msec
md0: Preloaded image </.boot/products/bsdimager-0.2r1.fs> 12206080 bytes at 0xcad2: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED>
ad2: 3815MB <SILICONMOTION SM223AC > at ata1-master UDMA66
0afc46c
GEOM_LABEL: Label for provider ad2s1 is ext2fs/SYSTEM.
GEOM_LABEL: Label for provider ad2s2 is ext2fs/USER.
GEOM_LABEL: Label for provider ad2s3 is msdosfs/BIOS.
nfs_diskless: no interface
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB2.0 CardReader SD0 0100> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 59MB (121856 512 byte sectors: 64H 32S/T 59C)
Trying to mount root from ufs:/dev/md0
axe0: vendor 0x077b product 0x2226, rev 2.00/0.01, addr 4
miibus0: <MII bus> on axe0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
axe0: Ethernet address: 00:10:60:25:7f:92
axe0: if_start running deferred for Giant
hostb0@pci0:0:0: class=0x060000 card=0x82d91043 chip=0x25908086 rev=0x04 hdr=0x00
class = bridge
subclass = HOST-PCI
agp0@pci0:2:0: class=0x030000 card=0x82d91043 chip=0x25928086 rev=0x04 hdr=0x00
class = display
subclass = VGA
none0@pci0:2:1: class=0x038000 card=0x82d91043 chip=0x27928086 rev=0x04 hdr=0x00
class = display
none1@pci0:27:0: class=0x040300 card=0x82a11043 chip=0x26688086 rev=0x04 hdr=0x00
class = multimedia
pcib1@pci0:28:0: class=0x060400 card=0x00000040 chip=0x26608086 rev=0x04 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib2@pci0:28:1: class=0x060400 card=0x00000040 chip=0x26628086 rev=0x04 hdr=0x01
class = bridge
subclass = PCI-PCI
pcib3@pci0:28:2: class=0x060400 card=0x00000040 chip=0x26648086 rev=0x04 hdr=0x01
class = bridge
subclass = PCI-PCI
uhci0@pci0:29:0: class=0x0c0300 card=0x82d81043 chip=0x26588086 rev=0x04 hdr=0x00
class = serial bus
subclass = USB
uhci1@pci0:29:1: class=0x0c0300 card=0x82d81043 chip=0x26598086 rev=0x04 hdr=0x00
class = serial bus
subclass = USB
uhci2@pci0:29:2: class=0x0c0300 card=0x82d81043 chip=0x265a8086 rev=0x04 hdr=0x00
class = serial bus
subclass = USB
uhci3@pci0:29:3: class=0x0c0300 card=0x82d81043 chip=0x265b8086 rev=0x04 hdr=0x00
class = serial bus
subclass = USB
ehci0@pci0:29:7: class=0x0c0320 card=0x82d81043 chip=0x265c8086 rev=0x04 hdr=0x00
class = serial bus
subclass = USB
pcib4@pci0:30:0: class=0x060401 card=0x00000050 chip=0x24488086 rev=0xd4 hdr=0x01
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x82d81043 chip=0x26418086 rev=0x04 hdr=0x00
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:2: class=0x010180 card=0x82d81043 chip=0x26538086 rev=0x04 hdr=0x00
class = mass storage
subclass = ATA
none2@pci0:31:3: class=0x0c0500 card=0x82d81043 chip=0x266a8086 rev=0x04 hdr=0x00
class = serial bus
subclass = SMBus
none3@pci3:0:0: class=0x020000 card=0x82331043 chip=0x20481969 rev=0xa0 hdr=0x00
class = network
subclass = ethernet
ath0@pci1:0:0: class=0x020000 card=0x10261a3b chip=0x001c168c rev=0x01 hdr=0x00
class = network
subclass = ethernet
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00
port 1 powered
port 2 powered
port 3 addr 4: high speed, power 300 mA, config 1, product 0x2226(0x2226), vendor 0x077b(0x077b), rev 0.01
port 4 powered
port 5 addr 2: high speed, power 498 mA, config 1, UB6225(0x6225), ENE(0x0cf2), rev 1.00
port 6 powered
port 7 powered
port 8 addr 3: high speed, power 500 mA, config 1, product 0x2761(0x2761), vendor 0xeb1a(0xeb1a), rev 8.21