http://forum.insanelymac.com/lofiversion/index.php/t68453.html
Set your Leopard Partition to "active" and create a Boot Loader. This is the way to create/repair MBR and boot loader after you do the Post-Installation Patch. This is how to do it:
Step one:
1. Boot to Tiger
Step two:
1.
- Download "Startupfiletool" - it can be found in this thread http://forum.insanelymac.com/index.php?sho...mp;#entry166040
2.
- Unstuff and place "Startupfiletool" in "usr/sbin"
the easiest way to do this is to press shift-cmd-g in Finder and enter "/usr/sbin" - then drag the "Startupfiletool" into the "sbin" folder
3.
- Locate and open the folder "files" on your Desktop (it's one of the folders from BrazilMAC's patch folder) - inside "files" is a folder called "i386" - open it.
- press shift-cmd-g in Finder and enter "/usr/standalone/i386" then drag all files from the first opened "i386" folder (the one on desktop/files) into the "i386" folder
4. I'm not 100% certain of tis, but I believe you may also need to put
"bless" into "usr/bin" (it can be found in the patch files on "desktop/files/")
Step three:
1. Open Terminal
2.
- Type: "diskutil list"
result will show all your partitions
- Write down volume name and disk identifier info!
Example:
name: Leopard
identifier: disk1s2 (1=disk number 2=partition number)
I will use "disk1s2" (or "rdisk1s2") and "Leopard " in this guide code! - exchange it to your correct numbers and name when you see type in the code!!!
Step four:
1. Mark the partition active
- Type: "sudo fdisk -e /dev/rdisk1"
(exchange "rdisk1" to your correct disk number!)
- enter your password
- Type: "update"
- Type: "f 2"
(exchange "f 2" to your correct partition number)
- Type: "w"
answer the question with "y"
- Type "q"
Step five:
- Type: "diskutil unmount /Volumes/Leopard"
(exchange "Leopard" for the correct name of your Leopard partition!)
- Type: "sudo dd if=/usr/standalone/i386/boot1h of=/dev/rdisk1s2 bs=512 count=1"
(exchange "rdisk1s2" for your correct disk and partition number!)
- Type: "sudo startupfiletool /dev/rdisk1s2 /usr/standalone/i386/boot"
(exchange "rdisk1s2" for your correct disk and partition number!)
- Type: "sudo bless -device /dev/disk1s2 -setBoot -verbose"
(exchange "disk1s2" for your correct disk and partition number!)
- Type: "diskutil mount /dev/disk1s2"
(exchange "disk1s2" for your correct disk and partition number!)
- Type: "bless -mount /Volumes/Leopard -setBoot -verbose"
(exchange "Leopard" for the correct name of your Leopard partition!)
You may get an error "Could not find IODeviceTree:/options" but it works!
Step six:
Boot Leopard