rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f5e0000 (usable)
[ 0.000000] BIOS-e820: 000000003f5e0000 - 000000003f5e3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f5e3000 - 000000003f5f0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f5f0000 - 000000003f600000 (reserved)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 117MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5590
[ 0.000000] Entering add_active_range(0, 0, 259552) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259552
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259552
[ 0.000000] On node 0 totalpages: 259552
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 235 pages used for memmap
[ 0.000000] HighMem zone: 29941 pages, LIFO batch:7
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6F30 checksum 0
[ 0.000000] ACPI: RSDP 000F6F30, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 3F5E3040, 0034 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: FACP 3F5E30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: DSDT 3F5E3180, 535A (r1 GBT GBTUACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 3F5E0000, 0040
[ 0.000000] ACPI: HPET 3F5E8640, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
[ 0.000000] ACPI: MCFG 3F5E86C0, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: APIC 3F5E8540, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f600000:90a00000)
[ 0.000000] Built 1 zonelists. Total pages: 257525
[ 0.000000] Kernel command line: root=UUID=87b3a5f5-68fb-4362-bb8f-2dd301a4f202 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2004.819 MHz processor.
[ 17.237375] Console: colour VGA+ 80x25
[ 17.237615] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 17.237961] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.271723] Memory: 1017064k/1038208k available (2015k kernel code, 20384k reserved, 916k data, 364k init, 120704k highmem)
[ 17.271734] virtual kernel memory layout:
[ 17.271736] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 17.271738] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 17.271739] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 17.271741] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 17.271743] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 17.271744] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 17.271746] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 17.271750] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 17.271788] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 17.271910] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 17.271917] hpet0: 4 64-bit timers, 14318180 Hz
[ 17.352805] Calibrating delay using timer specific routine.. 4012.94 BogoMIPS (lpj=8025890)
[ 17.352827] Security Framework v1.0.0 initialized
[ 17.352832] SELinux: Disabled at boot.
[ 17.352848] Mount-cache hash table entries: 512
[ 17.352974] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 17.352984] monitor/mwait feature present.
[ 17.352987] using mwait in idle threads.
[ 17.352991] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 17.352995] CPU: L2 cache: 2048K
[ 17.352998] CPU: Physical Processor ID: 0
[ 17.353000] CPU: Processor Core ID: 0
[ 17.353003] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 17.353013] Compat vDSO mapped to ffffe000.
[ 17.353027] Checking 'hlt' instruction... OK.
[ 17.368898] SMP alternatives: switching to UP code
[ 17.369388] Early unpacking initramfs... done
[ 17.850323] ACPI: Core revision 20070126
[ 17.850379] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 17.853446] CPU0: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 17.853466] SMP alternatives: switching to SMP code
[ 17.853538] Booting processor 1/1 eip 3000
[ 17.863800] Initializing CPU#1
[ 17.943870] Calibrating delay using timer specific routine.. 4009.46 BogoMIPS (lpj=8018932)
[ 17.943878] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 17.943885] monitor/mwait feature present.
[ 17.943889] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 17.943891] CPU: L2 cache: 2048K
[ 17.943894] CPU: Physical Processor ID: 0
[ 17.943896] CPU: Processor Core ID: 1
[ 17.943898] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 17.944577] CPU1: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 17.944602] Total of 2 processors activated (8022.41 BogoMIPS).
[ 17.944749] ENABLING IO-APIC IRQs
[ 17.944932] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 18.091739] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 18.111729] Brought up 2 CPUs
[ 18.244152] migration_cost=47
[ 18.244303] Booting paravirtualized kernel on bare hardware
[ 18.244369] Time: 8:21:43 Date: 07/10/104
[ 18.244392] NET: Registered protocol family 16
[ 18.244488] EISA bus registered
[ 18.244493] ACPI: bus type pci registered
[ 18.250453] PCI: PCI BIOS revision 3.00 entry at 0xfb5b0, last bus=3
[ 18.250455] PCI: Using configuration type 1
[ 18.250458] Setting up standard PCI resources
[ 18.251179] mtrr: your CPUs had inconsistent variable MTRR settings
[ 18.251181] mtrr: probably your BIOS does not setup all CPUs.
[ 18.251184] mtrr: corrected configuration.
[ 18.252809] ACPI: EC: Look up EC in DSDT
[ 18.258619] ACPI: Interpreter enabled
[ 18.258625] ACPI: (supports S0 S3 S4 S5)
[ 18.258648] ACPI: Using IOAPIC for interrupt routing
[ 18.267211] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.267242] PCI: Probing PCI hardware (bus 00)
[ 18.268736] PCI: Transparent bridge - 0000:00:1e.0
[ 18.268788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.269036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 18.269151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 18.269265] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 18.293548] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 18.293696] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 18.293842] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 18.293985] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 18.294128] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 18.294272] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 18.294416] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 18.294568] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 18.294711] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.294724] pnp: PnP ACPI init
[ 18.294734] ACPI: bus type pnp registered
[ 18.298127] pnp: PnP ACPI: found 13 devices
[ 18.298130] ACPI: ACPI bus type pnp unregistered
[ 18.298137] PnPBIOS: Disabled by ACPI PNP
[ 18.298196] PCI: Using ACPI for IRQ routing
[ 18.298199] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 18.326860] NET: Registered protocol family 8
[ 18.326863] NET: Registered protocol family 20
[ 18.326933] pnp: 00:09: ioport range 0x400-0x4bf has been reserved
[ 18.326940] pnp: 00:0a: iomem range 0xd0000000-0xdfffffff could not be reserved
[ 18.326948] pnp: 00:0b: iomem range 0xcb400-0xcbfff has been reserved
[ 18.326952] pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
[ 18.326956] pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[ 18.326959] pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[ 18.327274] Time: tsc clocksource has been installed.
[ 18.327283] Switched to high resolution mode on CPU 0
[ 18.327385] Switched to high resolution mode on CPU 1
[ 18.357305] PCI: Bridge: 0000:00:1c.0
[ 18.357309] IO window: b000-bfff
[ 18.357315] MEM window: disabled.
[ 18.357319] PREFETCH window: disabled.
[ 18.357325] PCI: Bridge: 0000:00:1c.4
[ 18.357329] IO window: c000-cfff
[ 18.357335] MEM window: f0000000-f0ffffff
[ 18.357339] PREFETCH window: disabled.
[ 18.357345] PCI: Bridge: 0000:00:1e.0
[ 18.357349] IO window: d000-dfff
[ 18.357355] MEM window: f1000000-f2ffffff
[ 18.357360] PREFETCH window: 40000000-400fffff
[ 18.357385] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.357393] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 18.357413] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.357419] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 18.357432] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 18.357445] NET: Registered protocol family 2
[ 18.403133] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 18.403190] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 18.404005] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 18.404295] TCP: Hash tables configured (established 131072 bind 65536)
[ 18.404298] TCP reno registered
[ 18.419267] checking if image is initramfs... it is
[ 19.370520] Freeing initrd memory: 7541k freed
[ 19.371188] audit: initializing netlink socket (disabled)
[ 19.371205] audit(1092126103.932:1): initialized
[ 19.371323] highmem bounce pool size: 64 pages
[ 19.373782] VFS: Disk quotas dquot_6.5.1
[ 19.373844] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 19.373950] io scheduler noop registered
[ 19.373952] io scheduler anticipatory registered
[ 19.373955] io scheduler deadline registered
[ 19.373973] io scheduler cfq registered (default)
[ 19.373990] Boot video device is 0000:00:02.0
[ 19.374206] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 19.374253] assign_interrupt_mode Found MSI capability
[ 19.374257] Allocate Port Service[0000:00:1c.0:pcie00]
[ 19.374301] Allocate Port Service[0000:00:1c.0:pcie02]
[ 19.374397] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 19.374444] assign_interrupt_mode Found MSI capability
[ 19.374447] Allocate Port Service[0000:00:1c.4:pcie00]
[ 19.374489] Allocate Port Service[0000:00:1c.4:pcie02]
[ 19.374662] isapnp: Scanning for PnP cards...
[ 19.727246] isapnp: No Plug & Play device found
[ 19.753590] Real Time Clock Driver v1.12ac
[ 19.753722] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 19.753826] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.754484] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 19.755364] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 19.755633] input: Macintosh mouse button emulation as /class/input/input0
[ 19.755729] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 19.755732] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 19.759019] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.759172] mice: PS/2 mouse device common for all mice
[ 19.759303] EISA: Probing bus 0 at eisa.0
[ 19.759338] EISA: Detected 0 cards.
[ 19.759556] TCP cubic registered
[ 19.759572] NET: Registered protocol family 1
[ 19.759596] Using IPI No-Shortcut mode
[ 19.759799] Magic number: 0:432:371
[ 19.759803] hash matches /build/buildd/linux-source-2.6.22-2.6.22/drivers/base/power/resume.c:28
[ 19.760061] Freeing unused kernel memory: 364k freed
[ 19.789022] input: AT Translated Set 2 keyboard as /class/input/input1
[ 21.017486] AppArmor: AppArmor initialized<5>audit(1092126105.432:2): type=1505 info="AppArmor initialized" pid=1178
[ 21.025250] fuse init (API version 7.8)
[ 21.030992] Failure registering capabilities with primary security module.
[ 21.069039] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 21.069061] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 21.069073] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 21.069087] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 21.590183] usbcore: registered new interface driver usbfs
[ 21.590213] usbcore: registered new interface driver hub
[ 21.590244] usbcore: registered new device driver usb
[ 21.591211] USB Universal Host Controller Interface driver v3.0
[ 21.591273] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 21.591285] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 21.591290] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 21.591428] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 21.591458] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e600
[ 21.591589] usb usb1: configuration #1 chosen from 1 choice
[ 21.591625] hub 1-0:1.0: USB hub found
[ 21.591632] hub 1-0:1.0: 2 ports detected
[ 21.694160] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17
[ 21.694173] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 21.694178] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 21.694209] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 21.694239] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
[ 21.694354] usb usb2: configuration #1 chosen from 1 choice
[ 21.694386] hub 2-0:1.0: USB hub found
[ 21.694393] hub 2-0:1.0: 2 ports detected
[ 21.722996] SCSI subsystem initialized
[ 21.729494] libata version 2.21 loaded.
[ 21.797943] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 21.797956] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 21.797961] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 21.797989] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 21.798019] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e100
[ 21.798140] usb usb3: configuration #1 chosen from 1 choice
[ 21.798173] hub 3-0:1.0: USB hub found
[ 21.798180] hub 3-0:1.0: 2 ports detected
[ 21.901754] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 21.901764] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 21.901769] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 21.901793] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 21.901821] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e300
[ 21.901933] usb usb4: configuration #1 chosen from 1 choice
[ 21.901966] hub 4-0:1.0: USB hub found
[ 21.901972] hub 4-0:1.0: 2 ports detected
[ 21.933609] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 22.005590] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 22.005599] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 22.005603] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 22.005628] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 22.005655] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e400
[ 22.005766] usb usb5: configuration #1 chosen from 1 choice
[ 22.005798] hub 5-0:1.0: USB hub found
[ 22.005804] hub 5-0:1.0: 2 ports detected
[ 22.109428] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 22.109437] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 22.109442] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 22.109466] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 22.109490] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 22.109605] usb usb6: configuration #1 chosen from 1 choice
[ 22.109641] hub 6-0:1.0: USB hub found
[ 22.109648] hub 6-0:1.0: 2 ports detected
[ 22.109783] usb 1-1: configuration #1 chosen from 1 choice
[ 22.213571] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 22.213584] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 22.213589] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 22.213618] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 22.213650] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 22.213657] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3205000
[ 22.218184] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.218296] usb usb7: configuration #1 chosen from 1 choice
[ 22.218329] hub 7-0:1.0: USB hub found
[ 22.218339] hub 7-0:1.0: 6 ports detected
[ 22.321120] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 22.321134] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 22.321139] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 22.321170] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 22.321203] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 22.321210] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf3204000
[ 22.325082] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.325183] usb usb8: configuration #1 chosen from 1 choice
[ 22.325217] hub 8-0:1.0: USB hub found
[ 22.325224] hub 8-0:1.0: 6 ports detected
[ 22.428973] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 22.428994] ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 21 (level, low) -> IRQ 17
[ 22.429307] eth0: RTL8169sc/8110sc at 0xf8862000, 00:1a:4d:51:5f:0c, XID 18000000 IRQ 17
[ 22.429996] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 22.479743] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f2004000-f20047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 22.482969] ata_piix 0000:00:1f.2: version 2.11
[ 22.482976] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 22.483002] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 22.483035] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 22.484604] scsi0 : ata_piix
[ 22.484699] scsi1 : ata_piix
[ 22.484836] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[ 22.484841] ata2: SATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[ 22.732407] usb 1-1: USB disconnect, address 2
[ 22.732615] usbcore: registered new interface driver hiddev
[ 22.815047] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
[ 22.815074] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 20
[ 22.815107] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 22.815141] scsi2 : ata_piix
[ 22.815193] scsi3 : ata_piix
[ 22.815316] ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e902 bmdma 0x0001ec00 irq 20
[ 22.815320] ata4: SATA max UDMA/133 cmd 0x0001ea00 ctl 0x0001eb02 bmdma 0x0001ec08 irq 20
[ 22.971985] usb 1-1: new low speed USB device using uhci_hcd and address 3
[ 23.142623] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 23.142659] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 23.142700] scsi4 : pata_jmicron
[ 23.142749] scsi5 : pata_jmicron
[ 23.142869] ata5: PATA max UDMA/100 cmd 0x0001c000 ctl 0x0001c102 bmdma 0x0001c400 irq 16
[ 23.142875] ata6: PATA max UDMA/100 cmd 0x0001c200 ctl 0x0001c302 bmdma 0x0001c408 irq 16
[ 23.151150] usb 1-1: configuration #1 chosen from 1 choice
[ 23.168270] input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input2
[ 23.168296] input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1
[ 23.168308] usbcore: registered new interface driver usbhid
[ 23.168312] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 23.391328] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 23.467821] ata5.00: Host Protected Area detected:
[ 23.467823] current size: 39067967 sectors
[ 23.467825] native size: 39070080 sectors
[ 23.467958] ata5.00: native size increased to 39070080 sectors
[ 23.467962] ata5.00: ATA-5: TOSHIBA MK2018GAS, Q2.03 D, max UDMA/100
[ 23.467966] ata5.00: 39070080 sectors, multi 16: LBA
[ 23.467972] ata5.01: ATAPI: Optiarc DVD RW AD-7633A, 1.00, max UDMA/33
[ 23.475902] ata5.00: configured for UDMA/100
[ 23.546417] usb 3-1: configuration #1 chosen from 1 choice
[ 23.647456] ata5.01: configured for UDMA/33
[ 23.746872] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c6bcf600001a4d]
[ 23.802851] scsi 4:0:0:0: Direct-Access ATA TOSHIBA MK2018GA Q2.0 PQ: 0 ANSI: 5
[ 23.810363] scsi 4:0:1:0: CD-ROM Optiarc DVD RW AD-7633A 1.00 PQ: 0 ANSI: 5
[ 23.821274] sd 4:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB)
[ 23.822086] sd 4:0:0:0: [sda] Write Protect is off
[ 23.822090] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.822114] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.822174] sd 4:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB)
[ 23.822186] sd 4:0:0:0: [sda] Write Protect is off
[ 23.822189] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.822209] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.822214] sda: sda1 sda2 < sda5 >
[ 23.932744] sd 4:0:0:0: [sda] Attached SCSI disk
[ 23.937497] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 23.937521] sr 4:0:1:0: Attached scsi generic sg1 type 5
[ 23.974360] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 23.974365] Uniform CD-ROM driver Revision: 3.20
[ 23.974899] sr 4:0:1:0: Attached scsi CD-ROM sr0
[ 24.279130] Attempting manual resume
[ 24.279134] swsusp: Resume From Partition 8:5
[ 24.279136] PM: Checking swsusp image.
[ 24.279347] PM: Resume from disk failed.
[ 24.296214] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 24.296219] EXT3-fs: write access will be enabled during recovery.
[ 26.778738] kjournald starting. Commit interval 5 seconds
[ 26.778751] EXT3-fs: recovery complete.
[ 26.780944] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.658449] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.701572] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.810913] parport_pc 00:07: reported by Plug and Play ACPI
[ 34.810961] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 34.876353] input: PC Speaker as /class/input/input3
[ 34.954968] Linux agpgart interface v0.102 (c) Dave Jones
[ 35.059355] agpgart: Detected an Intel G33 Chipset.
[ 35.060742] agpgart: Detected 7164K stolen memory.
[ 35.074719] agpgart: AGP aperture is 256M @ 0xe0000000
[ 35.337434] lirc_dev: IR Remote Control driver registered, at major 61
[ 35.355162] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: Driver for Soundgraph iMON MultiMedian IR/VFD, v0.3
[ 35.355168] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: Venky Raju <dev@venky.ws>
[ 35.355224] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: imon_probe: found IMON device
[ 35.355231] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 35.355275] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: imon_probe: Registered iMON plugin (minor:0)
[ 35.355347] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: imon_probe: iMON device on usb<3:2> initialized
[ 35.355362] usbcore: registered new interface driver lirc_imon
[ 35.932298] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 35.932320] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 36.215248] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[ 36.780649] lp0: using parport0 (interrupt-driven).
[ 37.242477] Adding 859436k swap on /dev/sda5. Priority:-1 extents:1 across:859436k
[ 37.704306] EXT3 FS on sda1, internal journal
[ 39.447544] No dock devices found.
[ 39.542056] input: Power Button (FF) as /class/input/input4
[ 39.542085] ACPI: Power Button (FF) [PWRF]
[ 39.542138] input: Power Button (CM) as /class/input/input5
[ 39.542156] ACPI: Power Button (CM) [PWRB]
[ 42.516239] r8169: eth0: link up
[ 43.540655] NET: Registered protocol family 10
[ 43.540766] lo: Disabled Privacy Extensions
[ 48.807246] NET: Registered protocol family 17
[ 49.183847] [drm] Initialized drm 1.1.0 20060810
[ 49.186236] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 49.186288] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 49.188567] set status page addr 0x00033000
[ 61.220105] eth0: no IPv6 routers present
[ 70.856789] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: IR port opened
[ 393.314653] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: IR port closed
[ 617.461361] ACPI: PCI interrupt for device 0000:03:05.0 disabled
[ 619.592328] PM: Preparing system for mem sleep
[ 619.592334] Stopping tasks ... done.
[ 619.732111] Suspending console(s)
[ 619.732137] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[ 620.073973] sd 4:0:0:0: [sda] Stopping disk
[ 620.648045] lirc_imon 3-1:1.0: no suspend for driver lirc_imon?
[ 620.676294] usb_device usbdev8.1: PM: suspend 0->2, parent usb8 already 2
[ 620.676298] usb_endpoint usbdev8.1_ep81: PM: suspend 0->2, parent 8-0:1.0 already 2
[ 620.676303] hub 8-0:1.0: PM: suspend 2->2, parent usb8 already 2
[ 620.676306] usb_endpoint usbdev8.1_ep00: PM: suspend 0->2, parent usb8 already 2
[ 620.676311] usb_device usbdev7.1: PM: suspend 0->2, parent usb7 already 2
[ 620.676315] usb_endpoint usbdev7.1_ep81: PM: suspend 0->2, parent 7-0:1.0 already 2
[ 620.676319] hub 7-0:1.0: PM: suspend 2->2, parent usb7 already 2
[ 620.676322] usb_endpoint usbdev7.1_ep00: PM: suspend 0->2, parent usb7 already 2
[ 620.676327] usb_device usbdev6.1: PM: suspend 0->2, parent usb6 already 2
[ 620.676331] usb_endpoint usbdev6.1_ep81: PM: suspend 0->2, parent 6-0:1.0 already 2
[ 620.676334] hub 6-0:1.0: PM: suspend 2->2, parent usb6 already 2
[ 620.676337] usb_endpoint usbdev6.1_ep00: PM: suspend 0->2, parent usb6 already 2
[ 620.676342] usb_device usbdev5.1: PM: suspend 0->2, parent usb5 already 2
[ 620.676345] usb_endpoint usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2
[ 620.676349] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2
[ 620.676352] usb_endpoint usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2
[ 620.676356] usb_device usbdev4.1: PM: suspend 0->2, parent usb4 already 2
[ 620.676360] usb_endpoint usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
[ 620.676363] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
[ 620.676367] usb_endpoint usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
[ 620.676389] usb_device usbdev2.1: PM: suspend 0->2, parent usb2 already 2
[ 620.676393] usb_endpoint usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
[ 620.676396] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
[ 620.676400] usb_endpoint usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
[ 621.136105] pnp: Device 00:07 disabled.
[ 621.136328] pnp: Device 00:06 disabled.
[ 621.152207] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 621.168071] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
[ 621.184053] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 621.199575] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 621.215493] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 621.215535] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 621.215577] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 621.223436] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 621.239445] ACPI: PCI interrupt for device 0000:00:1a.7 disabled
[ 621.255428] ACPI: PCI interrupt for device 0000:00:1a.2 disabled
[ 621.255471] ACPI: PCI interrupt for device 0000:00:1a.1 disabled
[ 621.255512] ACPI: PCI interrupt for device 0000:00:1a.0 disabled
[ 621.257376] Disabling non-boot CPUs ...
[ 621.371202] CPU 1 is now offline
[ 621.371205] SMP alternatives: switching to UP code
[ 621.371852] CPU1 is down
[ 621.371855] PM: Entering mem sleep
[ 0.627602] Back to C!
[ 0.712243] PM: Finishing wakeup.
[ 0.712246] Enabling non-boot CPUs ...
[ 1.092777] SMP alternatives: switching to SMP code
[ 1.092883] Booting processor 1/1 eip 3000
[ 1.103148] Initializing CPU#1
[ 1.180567] Calibrating delay using timer specific routine.. 4009.50 BogoMIPS (lpj=8019004)
[ 1.180575] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 1.180582] monitor/mwait feature present.
[ 1.180586] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 1.180589] CPU: L2 cache: 2048K
[ 1.180592] CPU: Physical Processor ID: 0
[ 1.180594] CPU: Processor Core ID: 1
[ 1.180596] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 1.181236] CPU1: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 1.181258] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 1.201235] Measured 33993701360 cycles TSC warp between CPUs, turning off TSC clock.
[ 605.020000] Marking TSC unstable due to: check_tsc_sync_source failed.
[ 605.040000] Time: hpet clocksource has been installed.
[ 605.040000] CPU1 is up
[ 605.044000] Switched to high resolution mode on CPU 1
[ 605.048000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 605.048000] PM: Writing back config space on device 0000:00:02.1 at offset 4 (was 0, writing f3180000)
[ 605.048000] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900007)
[ 605.048000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 605.048000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 605.048000] usb usb1: root hub lost power or was reset
[ 605.048000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17
[ 605.048000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 605.048000] usb usb2: root hub lost power or was reset
[ 605.048000] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 605.048000] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 605.048000] usb usb3: root hub lost power or was reset
[ 605.064000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 605.064000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 605.080000] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 105)
[ 605.080000] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing f3200004)
[ 605.080000] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 8)
[ 605.080000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002)
[ 605.080000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 605.080000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 605.156000] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 2000b0b0, writing b0b0)
[ 605.156000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 605.156000] PM: Writing back config space on device 0000:00:1c.4 at offset f (was 100, writing 10a)
[ 605.156000] PM: Writing back config space on device 0000:00:1c.4 at offset 9 (was 10001, writing 1fff1)
[ 605.156000] PM: Writing back config space on device 0000:00:1c.4 at offset 8 (was 0, writing f0f0f000)
[ 605.156000] PM: Writing back config space on device 0000:00:1c.4 at offset 7 (was 0, writing c0c0)
[ 605.156000] PM: Writing back config space on device 0000:00:1c.4 at offset 3 (was 810000, writing 810008)
[ 605.156000] PM: Writing back config space on device 0000:00:1c.4 at offset 1 (was 100000, writing 100007)
[ 605.156000] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 605.156000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 605.156000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 605.156000] usb usb4: root hub lost power or was reset
[ 605.156000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 605.156000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 605.156000] usb usb5: root hub lost power or was reset
[ 605.156000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 605.156000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 605.156000] usb usb6: root hub lost power or was reset
[ 605.172000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 605.172000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 605.172000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 605.188000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 605.188000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 605.188000] PM: Writing back config space on device 0000:00:1f.3 at offset 1 (was 2800001, writing 2800003)
[ 605.204000] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2b00003, writing 2b00007)
[ 605.204000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 20
[ 605.204000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 605.220000] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10a)
[ 605.220000] PM: Writing back config space on device 0000:02:00.0 at offset 8 (was 1, writing c401)
[ 605.220000] PM: Writing back config space on device 0000:02:00.0 at offset 7 (was 1, writing c301)
[ 605.220000] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing c201)
[ 605.220000] PM: Writing back config space on device 0000:02:00.0 at offset 5 (was 1, writing c101)
[ 605.220000] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 1, writing c001)
[ 605.220000] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 8)
[ 605.220000] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100000, writing 100007)
[ 605.220000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 605.220000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 605.220000] PM: Writing back config space on device 0000:03:05.0 at offset f (was 40200100, writing 4020010c)
[ 605.220000] PM: Writing back config space on device 0000:03:05.0 at offset 5 (was 0, writing f2005000)
[ 605.220000] PM: Writing back config space on device 0000:03:05.0 at offset 4 (was 1, writing d001)
[ 605.220000] PM: Writing back config space on device 0000:03:05.0 at offset 3 (was 0, writing 4008)
[ 605.220000] PM: Writing back config space on device 0000:03:05.0 at offset 1 (was 2b00000, writing 2b00013)
[ 605.236000] PM: Writing back config space on device 0000:03:07.0 at offset f (was 4020100, writing 4020103)
[ 605.236000] PM: Writing back config space on device 0000:03:07.0 at offset 5 (was 0, writing f2000000)
[ 605.236000] PM: Writing back config space on device 0000:03:07.0 at offset 4 (was 0, writing f2004000)
[ 605.236000] PM: Writing back config space on device 0000:03:07.0 at offset 3 (was 0, writing 2008)
[ 605.236000] PM: Writing back config space on device 0000:03:07.0 at offset 1 (was 2100000, writing 2100006)
[ 605.284000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f2004000-f20047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 605.284000] pnp: Device 00:06 activated.
[ 605.288000] pnp: Device 00:07 activated.
[ 605.288000] pnp: Failed to activate device 00:08.
[ 605.708000] usb_endpoint usbdev7.1_ep00: PM: resume from 0, parent usb7 still 2
[ 605.708000] usb_endpoint usbdev7.1_ep81: PM: resume from 0, parent 7-0:1.0 still 2
[ 605.708000] usb_device usbdev7.1: PM: resume from 0, parent usb7 still 2
[ 605.708000] usb_endpoint usbdev8.1_ep00: PM: resume from 0, parent usb8 still 2
[ 605.708000] usb_endpoint usbdev8.1_ep81: PM: resume from 0, parent 8-0:1.0 still 2
[ 605.708000] usb_device usbdev8.1: PM: resume from 0, parent usb8 still 2
[ 605.708000] usb_endpoint usbdev1.3_ep00: PM: resume from 0, parent 1-1 still 2
[ 605.708000] usbhid 1-1:1.0: PM: resume from 2, parent 1-1 still 2
[ 605.708000] usb_endpoint usbdev1.3_ep81: PM: resume from 0, parent 1-1:1.0 still 2
[ 605.708000] usb_device usbdev1.3: PM: resume from 0, parent 1-1 still 2
[ 605.708000] usb_endpoint usbdev3.2_ep00: PM: resume from 0, parent 3-1 still 2
[ 605.708000] lirc_imon 3-1:1.0: PM: resume from 2, parent 3-1 still 2
[ 605.708000] usb_endpoint usbdev3.2_ep81: PM: resume from 0, parent 3-1:1.0 still 2
[ 605.708000] usb_endpoint usbdev3.2_ep02: PM: resume from 0, parent 3-1:1.0 still 2
[ 605.708000] usb_device usbdev3.2: PM: resume from 0, parent 3-1 still 2
[ 605.708000] sd 4:0:0:0: [sda] Starting disk
[ 634.448000] ata5.01: revalidation failed (errno=-2)
[ 634.448000] ata5: failed to recover some devices, retrying in 5 secs
[ 639.776000] ata5.01: ACPI cmd ef/03:46:00:00:00:b0 failed (Emask=0x1 Stat=0x51 Err=0x04)
[ 639.776000] ata5.01: revalidation failed (errno=-5)
[ 639.776000] ata5.01: limiting speed to UDMA/33:PIO3
[ 639.776000] ata5: failed to recover some devices, retrying in 5 secs
[ 645.104000] ata5.01: ACPI cmd ef/03:46:00:00:00:b0 failed (Emask=0x1 Stat=0x51 Err=0x04)
[ 645.104000] ata5.01: ACPI on devcfg failed the second time, disabling (errno=-5)
[ 645.104000] ata5.01: revalidation failed (errno=1)
[ 645.104000] ata5.01: disabled
[ 645.104000] ata5: failed to recover some devices, retrying in 5 secs
[ 650.116000] ata5.00: ACPI cmd ef/03:46:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04)
[ 650.116000] ata5.00: revalidation failed (errno=-5)
[ 650.116000] ata5: failed to recover some devices, retrying in 5 secs
[ 655.284000] ata5.00: ACPI cmd ef/03:46:00:00:00:a0 failed (Emask=0x1 Stat=0x51 Err=0x04)
[ 655.284000] ata5.00: ACPI on devcfg failed the second time, disabling (errno=-5)
[ 655.284000] ata5.00: revalidation failed (errno=1)
[ 655.284000] ata5: failed to recover some devices, retrying in 5 secs
[ 660.452000] ata5.00: Host Protected Area detected:
[ 660.452000] current size: 39067967 sectors
[ 660.452000] native size: 39070080 sectors
[ 660.452000] ata5.00: native size increased to 39070080 sectors
[ 660.460000] ata5.00: configured for UDMA/100
[ 661.072000] sd 4:0:0:0: [sda] 39070080 512-byte hardware sectors (20004 MB)
[ 661.072000] usb lcd0: PM: resume from 0, parent 3-1:1.0 still 2
[ 661.076000] sd 4:0:0:0: [sda] Write Protect is off
[ 661.076000] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 661.076000] Restarting tasks ... <6>usb 1-1: USB disconnect, address 3
[ 661.084000] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 661.092000] Buffer I/O error on device sr0, logical block 256
[ 661.092000] Buffer I/O error on device sr0, logical block 257
[ 661.092000] Buffer I/O error on device sr0, logical block 256
[ 661.092000] Buffer I/O error on device sr0, logical block 257
[ 661.092000] Buffer I/O error on device sr0, logical block 256
[ 661.092000] Buffer I/O error on device sr0, logical block 257
[ 661.092000] Buffer I/O error on device sr0, logical block 256
[ 661.092000] Buffer I/O error on device sr0, logical block 257
[ 661.104000] done.
[ 661.316000] usb 1-1: new low speed USB device using uhci_hcd and address 4
[ 661.492000] usb 1-1: configuration #1 chosen from 1 choice
[ 661.508000] input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input6
[ 661.508000] input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1
[ 661.508000] usb 3-1: USB disconnect, address 2
[ 661.508000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: imon_disconnect: iMON device disconnected
[ 661.508000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: Deregistered iMON plugin (minor:0)
[ 661.748000] usb 3-1: new low speed USB device using uhci_hcd and address 3
[ 661.900000] usb 3-1: configuration #1 chosen from 1 choice
[ 661.904000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: imon_probe: found IMON device
[ 661.904000] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 661.904000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: imon_probe: Registered iMON plugin (minor:0)
[ 661.904000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/lirc/lirc_imon/lirc_imon.c: imon_probe: iMON device on usb<3:3> initialized
[ 662.092000] Buffer I/O error on device sr0, logical block 256
[ 662.092000] Buffer I/O error on device sr0, logical block 257
[ 666.280000] printk: 30 messages suppressed.
[ 666.280000] Buffer I/O error on device sr0, logical block 256
[ 671.292000] printk: 39 messages suppressed.
[ 671.292000] Buffer I/O error on device sr0, logical block 256
[ 676.296000] printk: 39 messages suppressed.
[ 676.296000] Buffer I/O error on device sr0, logical block 256
[ 681.300000] printk: 39 messages suppressed.
[ 681.300000] Buffer I/O error on device sr0, logical block 256
[ 686.308000] printk: 39 messages suppressed.
[ 686.308000] Buffer I/O error on device sr0, logical block 256
[ 691.556000] printk: 39 messages suppressed.
[ 691.556000] Buffer I/O error on device sr0, logical block 256