rendered paste bodyLZMA loader for BR-6104KP, Copyright (C) 2007 OpenWrt.org
decompressing kernel... done!
launching kernel...
Linux version 2.6.23.1 (yuhi@idared) (gcc version 4.1.2) #89 Sat Nov 10 19:13:53 CET 2007
console [early0] enabled
CPU revision is: 0001800b
SoC : ADM5120P revision 8, running at 175MHz
Bootdev : NOR flash
Prom : Generic
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Built 1 zonelists in Zone order. Total pages: 4064
Kernel command line: console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2 init=/etc/preinit
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Using 87.500 MHz high precision timer.
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 12608k/16384k available (1914k kernel code, 3776k reserved, 330k data, 1272k init, 0k highmem)
Mount-cache hash table entries: 512
adm5120: registered board 'Generic ADM5120 board'
adm5120: registered board 'Cellvision CAS-630/630W'
adm5120: registered board 'Cellvision CAS-670/670W'
adm5120: registered board 'Cellvision CAS-700/700W'
adm5120: registered board 'Cellvision CAS-771/771W'
adm5120: registered board 'Cellvision CAS-790'
adm5120: registered board 'Cellvision CAS-861/861W'
adm5120: registered board 'Compex WPP54G'
adm5120: registered board 'Compex WPP54AG'
adm5120: registered board 'Compex WP54G-WRT'
adm5120: registered board 'Compex WP54G'
adm5120: registered board 'Compex WP54AG'
adm5120: registered board 'Compex NetPassage 28G'
adm5120: registered board 'Compex NetPassage 27G'
adm5120: registered board 'Edimax BR-6104WG/6114WG'
adm5120: registered board 'Edimax BR-6104K/6104KP'
adm5120: registered board 'Infineon EASY 83000 Reference Board'
adm5120: registered board 'Infineon EASY 5120-WVoIP Reference Board'
adm5120: registered board 'Infineon EASY 5120-RT Reference Board'
adm5120: registered board 'Infineon EASY 5120P-ATA Reference Board'
adm5120: registered board 'Mikrotik RouterBOARD 192'
adm5120: registered board 'Mikrotik RouterBOARD 153'
adm5120: registered board 'Mikrotik RouterBOARD 150'
adm5120: registered board 'Mikrotik RouterBOARD 133C'
adm5120: registered board 'Mikrotik RouterBOARD 133'
adm5120: registered board 'Mikrotik RouterBOARD 112'
adm5120: registered board 'Mikrotik RouterBOARD 111'
adm5120: registered board 'ZyXEL Prestige 335/335WT'
adm5120: registered board 'ZyXEL Prestige 334WT'
NET: Registered protocol family 16
adm5120: setting up board 'Edimax BR-6104K/6104KP'
adm5120: system has no PCI BIOS
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) 2001-2006 Red Hat, Inc.
yaffs Nov 2 2007 14:42:51 Installing.
io scheduler noop registered
io scheduler deadline registered (default)
Serial: AMBA driver $Revision: 1.41 $
APB:UART0: ttyS0 at MMIO 0x12600000 (irq = 9) is a AMBA
console handover: boot [early0] -> real [ttyS0]
APB:UART1: ttyS1 at MMIO 0x12800000 (irq = 10) is a AMBA
ADM5120 built-in ethernet switch driver version 0.1.0
adm5120-flash.0: probing at 0x1FC00000, size:2048KiB, width:16 bits
adm5120-flash.0: requesting memory region at 1fc00000, size=00200000
adm5120-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
adm5120-flash.0: Macronix chip detected, id:0x2249, boot location forced to bottom
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
adm5120-flash.0: found at 0x1FC00000, size:2048KiB, width:16 bits
adm5120-flash.0: adding static partitions
Creating 3 MTD partitions on "adm5120-flash.0":
0x00000000-0x00008000 : "admboot"
0x00008000-0x00010000 : "config"
0x00010000-0x00200000 : "firmware"
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
trxsplit: searching TRX header in 'admboot'
trxsplit: searching TRX header in 'config'
trxsplit: searching TRX header in 'firmware'
Freeing unused kernel memory: 1272k freed
Warning: unable to open an initial console.
br-lan: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
Algorithmics/MIPS FPU Emulator v1.5
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering learning state
br-lan: topology change detected, propagating
br-lan: port 1(eth0) entering forwarding state
Please press Enter to activate this console. br-lan: port 1(eth0) entering disabled state
device eth0 left promiscuous mode
br-lan: port 1(eth0) entering disabled state
device eth0 entered promiscuous mode
br-lan: port 1(eth0) entering learning state
br-lan: topology change detected, propagating
br-lan: port 1(eth0) entering forwarding state
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PPP generic driver version 2.4.2
admhc-hcd: ADMtek USB 1.1 Host Controller Driver v0.03
admhc-hcd: block sizes: ed 80 td 32
adm5120-hcd adm5120-hcd.0: ADM5120 built-in USB 1.1 Host Controller
adm5120-hcd adm5120-hcd.0: new USB bus registered, assigned bus number 1
adm5120-hcd adm5120-hcd.0: irq 11, io mem 0x11200000
usb usb1: Product: ADM5120 built-in USB 1.1 Host Controller
usb usb1: Manufacturer: Linux 2.6.23.1 admhc-hcd
usb usb1: SerialNumber: ADM5120
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using adm5120-hcd and address 2
usb 1-1: Product: DataTraveler 2.0
usb 1-1: Manufacturer: Kingston
usb 1-1: SerialNumber: 26F0C5416302DC3F
usb 1-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
usb 1-2: new full speed USB device using adm5120-hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
scsi0 : SCSI emulation for USB Mass Storage devices
usb 1-2.1: new full speed USB device using adm5120-hcd and address 4
usb 1-2.1: Product: USB2.0 Card Reader
usb 1-2.1: Manufacturer: Generic
usb 1-2.1: SerialNumber: 0000001
usb 1-2.1: configuration #1 chosen from 1 choice
usb 1-2.2: new full speed USB device using adm5120-hcd and address 5
usb 1-2.2: Product: IrDA/USB Bridge
usb 1-2.2: Manufacturer: Sigmatel Inc
usb 1-2.2: configuration #1 chosen from 1 choice
usb 1-2.4: new full speed USB device using adm5120-hcd and address 6
usb 1-2.4: Product: USB2.0 Hub
usb 1-2.4: configuration #1 chosen from 1 choice
hub 1-2.4:1.0: USB hub found
hub 1-2.4:1.0: 4 ports detected
scsi1 : SCSI emulation for USB Mass Storage devices
usb 1-2.4.1: new full speed USB device using adm5120-hcd and address 7
usb 1-2.4.1: Product: USB Mass Storage Device
usb 1-2.4.1: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 4.10 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 503808 512-byte hardware sectors (258 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 503808 512-byte hardware sectors (258 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda:<7>usb-storage: queuecommand called
sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
scsi 1:0:0:0: Direct-Access Generic CF 1.6E PQ: 0 ANSI: 0 CCS
sd 1:0:0:0: [sdb] Attached SCSI removable disk
scsi 1:0:0:1: Direct-Access Generic MS 1.6E PQ: 0 ANSI: 0 CCS
sd 1:0:0:1: [sdc] Attached SCSI removable disk
scsi 1:0:0:2: Direct-Access Generic MMC/SD 1.6E PQ: 0 ANSI: 0 CCS
sd 1:0:0:2: [sdd] Attached SCSI removable disk
scsi 1:0:0:3: Direct-Access Generic SM 1.6E PQ: 0 ANSI: 0 CCS
sd 1:0:0:3: [sde] Attached SCSI removable disk
scsi 2:0:0:0: Direct-Access USB NAND FLASH DISK 0.20 PQ: 0 ANSI: 2
sd 2:0:0:0: [sdf] 512000 512-byte hardware sectors (262 MB)
sd 2:0:0:0: [sdf] Write Protect is off
sd 2:0:0:0: [sdf] Assuming drive cache: write through
sd 2:0:0:0: [sdf] 512000 512-byte hardware sectors (262 MB)
sd 2:0:0:0: [sdf] Write Protect is off
sd 2:0:0:0: [sdf] Assuming drive cache: write through
sdf:<7>usb-storage: queuecommand called
unknown partition table
sd 2:0:0:0: [sdf] Attached SCSI removable disk
yaffs: dev is 8388609 name is "sda1"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 8.1, "sda1"
yaffs: dev is 8388609 name is "sda1"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 8.1, "sda1"
BusyBox v1.8.1 (2007-11-10 18:20:27 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
KAMIKAZE (bleeding edge, r9526) -------------------
* 10 oz Vodka Shake well with ice and strain
* 10 oz Triple sec mixture into 10 shot glasses.
* 10 oz lime juice Salute!
---------------------------------------------------
root@OpenWrt:/# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 2, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.23.1 admhc-hcd
S: Product=ADM5120 built-in USB 1.1 Host Controller
S: SerialNumber=ADM5120
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0c76 ProdID=0005 Rev= 1.00
S: Manufacturer=Kingston
S: Product=DataTraveler 2.0
S: SerialNumber=26F0C5416302DC3F
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04b4 ProdID=6560 Rev= 0.09
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0dda ProdID=2027 Rev= 1.6e
S: Manufacturer=Generic
S: Product=USB2.0 Card Reader
S: SerialNumber=0000001
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=02 Prnt=03 Port=01 Cnt=02 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=ff(vend.) Sub=01 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=066f ProdID=4200 Rev= 0.08
S: Manufacturer= Sigmatel Inc
S: Product= IrDA/USB Bridge
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=440mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=02 Prnt=03 Port=03 Cnt=03 Dev#= 6 Spd=12 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0606 Rev= 7.02
S: Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=03 Prnt=06 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0c45 ProdID=1060 Rev= 1.00
S: Product=USB Mass Storage Device
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
root@OpenWrt:/#