Etwas

mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
mptbase: ioc0: PortPage0 minSyncFactor=8
mptspi: ioc0: saf_te 0
scsi5 : ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=66
mptspi: ioc0: id=0 Requested = 0x00000a00 (  factor = 0x0a @ offset = 0x00 )
mptspi: ioc0: id=1 Requested = 0x00000a00 (  factor = 0x0a @ offset = 0x00 )
  Vendor: HP        Model: Ultrium 4-SCSI    Rev: B12H
  Type:   Sequential-Access                  ANSI SCSI revision: 05
Disabling QAS due to noQas=01 on id=1!
mptspi: ioc0: id=1 min_period=0x08 max_offset=0x7f max_width=1
 target5:0:1: Beginning Domain Validation
mptspi: ioc0: id=1 Requested = 0x00000a00 (  factor = 0x0a @ offset = 0x00 )
mptspi: ioc0: id=1 Requested = 0x00000a00 (  factor = 0x0a @ offset = 0x00 )
scsi 5:0:1:0:
        command: Inquiry: 12 00 00 00 60 00
scsi 5:0:1:0:
        command: Inquiry: 12 00 00 00 60 00
scsi 5:0:1:0:
        command: Inquiry: 12 00 00 00 60 00
scsi 5:0:1:0:
        command: Inquiry: 12 00 00 00 60 00
mptspi: ioc0: id=1 Requested = 0x20000a00 ( Wide  factor = 0x0a @ offset = 0x00 )
scsi 5:0:1:0:
        command: Inquiry: 12 00 00 00 60 00
scsi 5:0:1:0:
        command: Inquiry: 12 00 00 00 60 00
scsi 5:0:1:0:
        command: Inquiry: 12 00 00 00 60 00
mptspi: ioc0: id=1 Requested = 0x207f0a00 ( Wide  factor = 0x0a @ offset = 0x7f )
mptspi: ioc0: id=1 Requested = 0x207f0803 ( Wide  factor = 0x08 @ offset = 0x7f IU DT )
mptspi: ioc0: id=1 Requested = 0x207f0803 ( Wide  factor = 0x08 @ offset = 0x7f IU DT )
mptspi: ioc0: id=1 Requested = 0x207f0823 ( Wide  factor = 0x08 @ offset = 0x7f IU DT RDSTRM )
mptspi: ioc0: id=1 Requested = 0x207f0833 ( Wide  factor = 0x08 @ offset = 0x7f IU DT WRFLOW RDSTRM )
mptspi: ioc0: id=1 Requested = 0x207f0873 ( Wide  factor = 0x08 @ offset = 0x7f IU DT WRFLOW RDSTRM RTI )
mptspi: ioc0: id=1 Requested = 0x207f08f3 ( Wide  factor = 0x08 @ offset = 0x7f IU DT WRFLOW RDSTRM RTI PCOMP )
scsi 5:0:1:0:
        command: Inquiry: 12 00 00 00 60 00
scsi 5:0:1:0:
        command: Inquiry: 12 00 00 00 60 00
scsi 5:0:1:0:
        command: Inquiry: 12 00 00 00 60 00
mptspi: ioc0: id=1 Read = 0x20400902 ( Wide  factor = 0x09 @ offset = 0x40 DT )
scsi 5:0:1:0:
        command: Test Unit Ready: 00 00 00 00 00 00
scsi 5:0:1:0:
        command: Test Unit Ready: 00 00 00 00 00 00
scsi 5:0:1:0:
        command: Test Unit Ready: 00 00 00 00 00 00
scsi 5:0:1:0:
        command: Test Unit Ready: 00 00 00 00 00 00
 target5:0:1: Domain Validation skipping write tests
 target5:0:1: Ending Domain Validation
mptspi: ioc0: id=1 Read = 0x20400902 ( Wide  factor = 0x09 @ offset = 0x40 DT )
 target5:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 64)