rendered paste body<5>[ 0.000000] Linux version 2.6.21-hh17 (oeichler@frogmobil) (gcc version 4.1.2) #1 PREEMPT Wed Nov 7 14:41:07 CET 2007
<4>[ 0.000000] CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f
<4>[ 0.000000] Machine: FSC Loox C550
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 16384
<7>[ 0.000000] DMA zone: 128 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 16256 pages, LIFO batch:3
<7>[ 0.000000] Normal zone: 0 pages used for memmap
<6>[ 0.000000] Run Mode clock: 208.00MHz (*16)
<6>[ 0.000000] Turbo Mode clock: 624.00MHz (*3.0, active)
<6>[ 0.000000] Memory clock: 208.00MHz (/2)
<6>[ 0.000000] System bus clock: 208.00MHz
<4>[ 0.000000] CPU0: D VIVT undefined 5 cache
<4>[ 0.000000] CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
<4>[ 0.000000] CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
<4>[ 0.000000] Built 1 zonelists. Total pages: 16256
<5>[ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootdelay=10
<4>[ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
<4>[ 0.000000] Console: colour dummy device 80x30
<4>[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Memory: 64MB = 64MB total
<5>[ 0.000000] Memory: 62220KB available (2304K code, 240K data, 100K init)
<7>[ 0.000000] Calibrating delay loop... 622.59 BogoMIPS (lpj=3112960)
<4>[ 0.220000] Mount-cache hash table entries: 512
<6>[ 0.220000] CPU: Testing write buffer coherency: ok
<6>[ 0.220000] NET: Registered protocol family 16
<6>[ 0.240000] ads7846_ssp: Using SSP1
<6>[ 0.250000] Bluetooth: Core ver 2.11
<6>[ 0.250000] NET: Registered protocol family 31
<6>[ 0.250000] Bluetooth: HCI device and connection manager initialized
<6>[ 0.250000] Bluetooth: HCI socket layer initialized
<6>[ 0.250000] NET: Registered protocol family 2
<6>[ 0.260000] Time: pxa_timer clocksource has been installed.
<4>[ 0.330000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>[ 0.330000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
<4>[ 0.330000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.330000] TCP: Hash tables configured (established 2048 bind 2048)
<6>[ 0.330000] TCP reno registered
<6>[ 0.360000] PXA CPU frequency change support initialized
<4>[ 0.360000] NetWinder Floating Point Emulator V0.97 (double precision)
<6>[ 0.360000] io scheduler noop registered
<6>[ 0.360000] io scheduler anticipatory registered (default)
<6>[ 0.360000] io scheduler deadline registered
<4>[ 0.380000] Console: switching to colour frame buffer device 60x80
<6>[ 0.480000] pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
<6>[ 0.480000] pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
<6>[ 0.480000] pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
<6>[ 0.480000] pxa2xx-ir-serial: Initialized
<4>[ 0.490000] RAMDISK driver initialized: 4 RAM disks of 8192K size 1024 blocksize
<6>[ 0.490000] pxa27x_udc: version 01-01-2006
<4>[ 0.490000] ether gadget: using random self ethernet address
<4>[ 0.490000] ether gadget: using random host ethernet address
<6>[ 0.490000] usb0: Ethernet Gadget, version: May Day 2005
<6>[ 0.490000] usb0: using pxa27x_udc, OUT ep2out-bulk IN ep1in-bulk STATUS ep3in-intr
<6>[ 0.490000] usb0: MAC 26:4e:d3:1e:ab:1e
<6>[ 0.490000] usb0: HOST MAC 52:c6:f2:39:51:bb
<6>[ 0.490000] usb0: RNDIS ready
<6>[ 0.600000] input: gpio-keys as /class/input/input0
<6>[ 0.600000] input: ts-adc as /class/input/input1
<7>[ 0.600000] sa1100-rtc sa1100-rtc: rtc intf: sysfs
<7>[ 0.600000] sa1100-rtc sa1100-rtc: rtc intf: proc
<7>[ 0.600000] sa1100-rtc sa1100-rtc: rtc intf: dev (254:0)
<6>[ 0.600000] sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
<4>[ 0.600000] No IRQF_TRIGGER set_type function for IRQ 0 (SC)
<6>[ 0.610000] APM Battery Driver
<6>[ 0.610000] Bluetooth: HCI UART driver ver 2.2
<6>[ 0.610000] Bluetooth: HCI H4 protocol initialized
<6>[ 0.610000] Bluetooth: HCI BCSP protocol initialized
<7>[ 0.610000] min dma period: 461536 ps, new clock 624000 kHz
<7>[ 0.610000] min dma period: 461536 ps, new clock 624000 kHz
<6>[ 0.610000] TCP cubic registered
<6>[ 0.610000] NET: Registered protocol family 1
<6>[ 0.610000] NET: Registered protocol family 17
<6>[ 0.610000] Bluetooth: L2CAP ver 2.8
<6>[ 0.610000] Bluetooth: L2CAP socket layer initialized
<6>[ 0.610000] Bluetooth: SCO (Voice Link) ver 0.5
<6>[ 0.610000] Bluetooth: SCO socket layer initialized
<6>[ 0.610000] Bluetooth: RFCOMM socket layer initialized
<6>[ 0.610000] Bluetooth: RFCOMM TTY layer initialized
<6>[ 0.610000] Bluetooth: RFCOMM ver 1.8
<6>[ 0.610000] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
<6>[ 0.610000] Bluetooth: BNEP filters: protocol multicast
<6>[ 0.610000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 0.610000] XScale iWMMXt coprocessor detected.
<6>[ 0.610000] sa1100-rtc sa1100-rtc: setting the system clock to 2023-01-01 12:02:29 (1672574549)
<6>[ 0.620000] Waiting 10sec before mounting root device...
<6>[ 0.650000] mmcblk0: mmc0:cffc SU512 495488KiB
<6>[ 0.660000] mmcblk0: p1
<6>[ 0.840000] udc: USB reset
<6>[ 1.220000] udc: USB reset
<6>[ 1.340000] udc: USB reset
<6>[ 1.520000] usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset
<4>[ 10.630000] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
<4>[ 10.640000] VFS: Mounted root (ext2 filesystem).
<6>[ 10.650000] Freeing init memory: 100K
<7>[ 99.640000] init_special_inode: bogus i_mode (166400)
<7>[ 99.640000] init_special_inode: bogus i_mode (166400)
<7>[ 105.660000] init_special_inode: bogus i_mode (166400)
<7>[ 105.660000] init_special_inode: bogus i_mode (166400)
<6>[ 114.250000] udc: USB reset
<6>[ 114.490000] udc: USB reset
<6>[ 114.600000] udc: USB reset
<6>[ 114.790000] usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset
<6>[ 252.930000] udc: USB reset
<6>[ 263.700000] udc: USB reset
<6>[ 264.040000] udc: USB reset
<6>[ 264.090000] udc: USB reset
<6>[ 280.640000] attempt to access beyond end of device
<6>[ 280.640000] mmcblk0p1: rw=0, want=176903170, limit=990739
<6>[ 280.640000] attempt to access beyond end of device
<6>[ 280.640000] mmcblk0p1: rw=0, want=176903170, limit=990739
<6>[ 280.640000] attempt to access beyond end of device
<6>[ 280.640000] mmcblk0p1: rw=0, want=176903682, limit=990739
<6>[ 280.640000] attempt to access beyond end of device
<6>[ 280.640000] mmcblk0p1: rw=0, want=176903682, limit=990739
<6>[ 280.640000] attempt to access beyond end of device
<6>[ 280.640000] mmcblk0p1: rw=0, want=176905218, limit=990739
<6>[ 280.640000] attempt to access beyond end of device
<6>[ 280.640000] mmcblk0p1: rw=0, want=176905218, limit=990739
<6>[ 280.640000] attempt to access beyond end of device
<6>[ 280.640000] mmcblk0p1: rw=0, want=176905730, limit=990739
<6>[ 280.640000] attempt to access beyond end of device
<6>[ 280.640000] mmcblk0p1: rw=0, want=176905730, limit=990739
<6>[ 280.690000] udc: USB reset
<6>[ 281.170000] attempt to access beyond end of device
<6>[ 281.170000] mmcblk0p1: rw=0, want=176903170, limit=990739
<6>[ 281.170000] attempt to access beyond end of device
<6>[ 281.170000] mmcblk0p1: rw=0, want=176903682, limit=990739
<6>[ 281.170000] attempt to access beyond end of device
<6>[ 281.170000] mmcblk0p1: rw=0, want=176905218, limit=990739
<6>[ 281.170000] attempt to access beyond end of device
<6>[ 281.170000] mmcblk0p1: rw=0, want=176905730, limit=990739
<6>[ 281.710000] udc: USB reset
<6>[ 281.840000] udc: USB reset
<6>[ 282.080000] usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset
<6>[ 299.080000] attempt to access beyond end of device
<6>[ 299.090000] mmcblk0p1: rw=0, want=176903170, limit=990739
<6>[ 299.090000] attempt to access beyond end of device
<6>[ 299.090000] mmcblk0p1: rw=0, want=176903682, limit=990739
<6>[ 299.090000] attempt to access beyond end of device
<6>[ 299.100000] mmcblk0p1: rw=0, want=176905218, limit=990739
<6>[ 299.100000] attempt to access beyond end of device
<6>[ 299.100000] mmcblk0p1: rw=0, want=176905730, limit=990739
<6>[ 302.530000] attempt to access beyond end of device
<6>[ 302.530000] mmcblk0p1: rw=0, want=176903170, limit=990739
<6>[ 302.540000] attempt to access beyond end of device
<6>[ 302.540000] mmcblk0p1: rw=0, want=176903682, limit=990739
<6>[ 302.540000] attempt to access beyond end of device
<6>[ 302.540000] mmcblk0p1: rw=0, want=176905218, limit=990739
<6>[ 302.550000] attempt to access beyond end of device
<6>[ 302.550000] mmcblk0p1: rw=0, want=176905730, limit=990739
<4>[ 320.410000] ts-adc: Sample with too much jitter - ignored
<4>[ 320.430000] ts-adc: Sample with too much jitter - ignored
<4>[ 320.550000] ts-adc: Sample with too much jitter - ignored
<4>[ 320.750000] ts-adc: Sample with too much jitter - ignored
<6>[ 320.820000] attempt to access beyond end of device
<6>[ 320.820000] mmcblk0p1: rw=0, want=176903170, limit=990739
<6>[ 320.830000] attempt to access beyond end of device
<6>[ 320.830000] mmcblk0p1: rw=0, want=176903682, limit=990739
<6>[ 320.830000] attempt to access beyond end of device
<6>[ 320.830000] mmcblk0p1: rw=0, want=176905218, limit=990739
<6>[ 320.840000] attempt to access beyond end of device
<4>[ 320.840000] ts-adc: Sample with too much jitter - ignored
<6>[ 320.840000] mmcblk0p1: rw=0, want=176905730, limit=990739
<4>[ 320.930000] ts-adc: Sample with too much jitter - ignored
<4>[ 321.050000] ts-adc: Sample with too much jitter - ignored
<6>[ 321.450000] attempt to access beyond end of device
<6>[ 321.450000] mmcblk0p1: rw=0, want=176903170, limit=990739
<6>[ 321.460000] attempt to access beyond end of device
<6>[ 321.460000] mmcblk0p1: rw=0, want=176903682, limit=990739
<6>[ 321.460000] attempt to access beyond end of device
<6>[ 321.460000] mmcblk0p1: rw=0, want=176905218, limit=990739
<6>[ 321.470000] attempt to access beyond end of device
<6>[ 321.470000] mmcblk0p1: rw=0, want=176905730, limit=990739
<4>[ 321.650000] ts-adc: Sample with too much jitter - ignored
<4>[ 321.670000] ts-adc: Sample with too much jitter - ignored
<4>[ 321.690000] ts-adc: Sample with too much jitter - ignored
<4>[ 321.730000] ts-adc: Sample with too much jitter - ignored