rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
[ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f65c0
[ 0.000000] Entering add_active_range(0, 0, 259712) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259712
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259712
[ 0.000000] On node 0 totalpages: 259712
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30099 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6510 checksum 0
[ 0.000000] ACPI: RSDP 000F6510, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3F68C0FF, 0050 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3F693C86, 0074 (r1 HP NISSAN 6040000 LOHR 5A)
[ 0.000000] ACPI: DSDT 3F68D506, 6780 (r1 HP NISSAN 6040000 INTL 20060608)
[ 0.000000] ACPI: FACS 3F694FC0, 0040
[ 0.000000] ACPI: APIC 3F693CFA, 0068 (r1 HP NISSAN 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 3F693D62, 0038 (r1 HP NISSAN 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 3F693D9A, 003C (r1 HP NISSAN 6040000 LOHR 5A)
[ 0.000000] ACPI: BOOT 3F693FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SLIC 3F693E08, 0176 (r1 HPQOEM SLIC-MPC 6040000 LOHR 0)
[ 0.000000] ACPI: APIC 3F693F7E, 005A (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: SSDT 3F68CEB3, 064F (r1 SataRe SataPri 1000 INTL 20060217)
[ 0.000000] ACPI: SSDT 3F68C821, 0692 (r1 SataRe SataSec 1000 INTL 20060217)
[ 0.000000] ACPI: SSDT 3F68C645, 01DC (r1 PmRef Cpu0Cst 3001 INTL 20060217)
[ 0.000000] ACPI: SSDT 3F68C14F, 04F6 (r1 PmRef CpuPm 3000 INTL 20060217)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 7:6 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 257683
[ 0.000000] Kernel command line: root=UUID=aeea4e0d-a949-4660-bc08-7b455b21efac ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.152 MHz processor.
[ 15.831794] Console: colour VGA+ 80x25
[ 15.832220] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.832577] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.861141] Memory: 1017964k/1038848k available (2015k kernel code, 20156k reserved, 916k data, 364k init, 121344k highmem)
[ 15.861151] virtual kernel memory layout:
[ 15.861152] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 15.861153] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.861155] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.861156] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.861157] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 15.861158] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 15.861159] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 15.861162] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.861200] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 15.861355] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 15.861361] hpet0: 3 64-bit timers, 14318180 Hz
[ 15.942307] Calibrating delay using timer specific routine.. 3195.72 BogoMIPS (lpj=6391442)
[ 15.942332] Security Framework v1.0.0 initialized
[ 15.942339] SELinux: Disabled at boot.
[ 15.942353] Mount-cache hash table entries: 512
[ 15.942493] CPU: After generic identify, caps: afebfbff 20100000 00000000 00000000 0000e31d 00000000 00000001
[ 15.942502] monitor/mwait feature present.
[ 15.942504] using mwait in idle threads.
[ 15.942510] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 15.942513] CPU: L2 cache: 1024K
[ 15.942516] CPU: After all inits, caps: afebfbff 20100000 00000000 00003940 0000e31d 00000000 00000001
[ 15.942526] Compat vDSO mapped to ffffe000.
[ 15.942541] Checking 'hlt' instruction... OK.
[ 15.958416] SMP alternatives: switching to UP code
[ 15.958640] Freeing SMP alternatives: 11k freed
[ 15.958914] Early unpacking initramfs... done
[ 16.317980] ACPI: Core revision 20070126
[ 16.318035] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 16.342217] CPU0: Intel(R) Celeron(R) M CPU 520 @ 1.60GHz stepping 01
[ 16.342245] Total of 1 processors activated (3195.72 BogoMIPS).
[ 16.342440] ENABLING IO-APIC IRQs
[ 16.342642] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 16.489821] Brought up 1 CPUs
[ 16.489929] Booting paravirtualized kernel on bare hardware
[ 16.490015] Time: 19:50:15 Date: 10/07/107
[ 16.490033] NET: Registered protocol family 16
[ 16.490110] EISA bus registered
[ 16.490115] ACPI: bus type pci registered
[ 16.490237] PCI: PCI BIOS revision 2.10 entry at 0xfd873, last bus=8
[ 16.490240] PCI: Using configuration type 1
[ 16.490242] Setting up standard PCI resources
[ 16.492211] ACPI: EC: Look up EC in DSDT
[ 16.492806] ACPI: EC: GPE=0x19, ports=0x66, 0x62
[ 16.494006] ACPI: System BIOS is requesting _OSI(Linux)
[ 16.494008] ACPI: Please test with "acpi_osi=!Linux"
[ 16.494010] Please send dmidecode to linux-acpi@vger.kernel.org
[ 16.494457] ACPI: Interpreter enabled
[ 16.494462] ACPI: (supports S0 S3 S4 S5)
[ 16.494478] ACPI: Using IOAPIC for interrupt routing
[ 16.543026] ACPI: EC: GPE=0x19, ports=0x66, 0x62
[ 16.543076] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.543091] PCI: Probing PCI hardware (bus 00)
[ 16.543799] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 16.543804] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 16.544591] PCI: Transparent bridge - 0000:00:1e.0
[ 16.544657] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.544955] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 16.545076] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 16.545204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 16.547462] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 16.547558] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 16.547650] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 16.547740] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 16.547831] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 16.547922] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 16.548014] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 16.548104] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 16.548212] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.548225] pnp: PnP ACPI init
[ 16.548233] ACPI: bus type pnp registered
[ 16.574278] pnp: PnP ACPI: found 10 devices
[ 16.574280] ACPI: ACPI bus type pnp unregistered
[ 16.574284] PnPBIOS: Disabled by ACPI PNP
[ 16.574334] PCI: Using ACPI for IRQ routing
[ 16.574336] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.574341] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 16.574406] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 16.574466] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[ 16.574527] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[ 16.574622] PCI: Cannot allocate resource region 0 of device 0000:06:00.0
[ 16.592561] NET: Registered protocol family 8
[ 16.592563] NET: Registered protocol family 20
[ 16.592619] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 16.592622] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 16.592626] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 16.592629] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 16.592636] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 16.593688] Time: tsc clocksource has been installed.
[ 16.593705] Switched to high resolution mode on CPU 0
[ 16.622917] PCI: Bridge: 0000:00:1c.0
[ 16.622918] IO window: disabled.
[ 16.622924] MEM window: disabled.
[ 16.622929] PREFETCH window: disabled.
[ 16.622948] PCI: Bridge: 0000:00:1c.2
[ 16.622949] IO window: disabled.
[ 16.622956] MEM window: 50000000-500fffff
[ 16.622960] PREFETCH window: disabled.
[ 16.622968] PCI: Bridge: 0000:00:1e.0
[ 16.622971] IO window: 2000-2fff
[ 16.622977] MEM window: d0100000-d01fffff
[ 16.622982] PREFETCH window: disabled.
[ 16.623013] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 16.623022] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.623046] PCI: Enabling device 0000:00:1c.2 (0100 -> 0102)
[ 16.623051] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
[ 16.623059] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 16.623073] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 16.623086] NET: Registered protocol family 2
[ 16.661632] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.661723] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 16.662827] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.663321] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.663324] TCP reno registered
[ 16.673755] checking if image is initramfs... it is
[ 17.376465] Freeing initrd memory: 7353k freed
[ 17.376629] Simple Boot Flag at 0x36 set to 0x1
[ 17.376968] audit: initializing netlink socket (disabled)
[ 17.376997] audit(1194465015.104:1): initialized
[ 17.377072] highmem bounce pool size: 64 pages
[ 17.378965] VFS: Disk quotas dquot_6.5.1
[ 17.379008] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 17.379097] io scheduler noop registered
[ 17.379099] io scheduler anticipatory registered
[ 17.379101] io scheduler deadline registered
[ 17.379115] io scheduler cfq registered (default)
[ 17.379129] Boot video device is 0000:00:02.0
[ 25.369753] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[ 25.369848] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 25.369910] assign_interrupt_mode Found MSI capability
[ 25.369913] Allocate Port Service[0000:00:1c.0:pcie00]
[ 25.369948] Allocate Port Service[0000:00:1c.0:pcie02]
[ 25.370048] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 25.370109] assign_interrupt_mode Found MSI capability
[ 25.370111] Allocate Port Service[0000:00:1c.2:pcie00]
[ 25.370141] Allocate Port Service[0000:00:1c.2:pcie02]
[ 25.370294] isapnp: Scanning for PnP cards...
[ 25.724298] isapnp: No Plug & Play device found
[ 25.744488] Real Time Clock Driver v1.12ac
[ 25.744707] hpet_resources: 0xfed00000 is busy
[ 25.744732] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 25.745858] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 25.746057] input: Macintosh mouse button emulation as /class/input/input0
[ 25.746129] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 25.771789] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 25.771794] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 25.771959] mice: PS/2 mouse device common for all mice
[ 25.773150] EISA: Probing bus 0 at eisa.0
[ 25.773157] Cannot allocate resource for EISA slot 1
[ 25.773160] Cannot allocate resource for EISA slot 2
[ 25.773185] EISA: Detected 0 cards.
[ 25.773275] TCP cubic registered
[ 25.773289] NET: Registered protocol family 1
[ 25.773316] Using IPI No-Shortcut mode
[ 25.773459] Magic number: 15:359:849
[ 25.773536] hash matches device ptyv1
[ 25.773781] Freeing unused kernel memory: 364k freed
[ 25.805430] input: AT Translated Set 2 keyboard as /class/input/input1
[ 26.990912] AppArmor: AppArmor initialized<5>audit(1194465024.604:2): type=1505 info="AppArmor initialized" pid=1206
[ 26.997140] fuse init (API version 7.8)
[ 27.001725] Failure registering capabilities with primary security module.
[ 27.016939] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 27.016946] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 27.016957] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 27.033807] ACPI: Thermal Zone [TZ01] (55 C)
[ 27.033932] ACPI: Thermal Zone [TZ02] (27 C)
[ 27.552190] usbcore: registered new interface driver usbfs
[ 27.552212] usbcore: registered new interface driver hub
[ 27.552232] usbcore: registered new device driver usb
[ 27.552984] USB Universal Host Controller Interface driver v3.0
[ 27.553044] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 27.553055] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 27.553059] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 27.553196] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 27.553230] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820
[ 27.553339] usb usb1: configuration #1 chosen from 1 choice
[ 27.553362] hub 1-0:1.0: USB hub found
[ 27.553369] hub 1-0:1.0: 2 ports detected
[ 27.632217] SCSI subsystem initialized
[ 27.637168] libata version 2.21 loaded.
[ 27.655828] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 27.655840] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 27.655845] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 27.655867] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 27.655902] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 27.655997] usb usb2: configuration #1 chosen from 1 choice
[ 27.656021] hub 2-0:1.0: USB hub found
[ 27.656027] hub 2-0:1.0: 2 ports detected
[ 27.743947] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 27.759744] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
[ 27.759757] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 27.759762] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 27.759785] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 27.759821] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00001860
[ 27.759921] usb usb3: configuration #1 chosen from 1 choice
[ 27.759948] hub 3-0:1.0: USB hub found
[ 27.759955] hub 3-0:1.0: 2 ports detected
[ 11.792000] Marking TSC unstable due to: possible TSC halt in C2.
[ 11.828000] Time: hpet clocksource has been installed.
[ 11.884000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 11.884000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 11.884000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 11.884000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 11.884000] ehci_hcd 0000:00:1d.7: debug port 1
[ 11.884000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 11.884000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd0544000
[ 11.888000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 11.888000] usb usb4: configuration #1 chosen from 1 choice
[ 11.888000] hub 4-0:1.0: USB hub found
[ 11.888000] hub 4-0:1.0: 6 ports detected
[ 11.992000] ata_piix 0000:00:1f.2: version 2.11
[ 11.992000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 12.148000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 12.148000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 12.148000] scsi0 : ata_piix
[ 12.148000] scsi1 : ata_piix
[ 12.148000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011890 irq 14
[ 12.148000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011898 irq 15
[ 12.312000] ata1.00: ATA-7: ST9120822AS, 3.BHD, max UDMA/100
[ 12.312000] ata1.00: 234441648 sectors, multi 16: LBA48
[ 12.328000] ata1.00: configured for UDMA/100
[ 12.500000] Clocksource tsc unstable (delta = -480945774 ns)
[ 12.664000] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L632H, HS02, max MWDMA2
[ 12.852000] ata2.00: configured for MWDMA2
[ 12.852000] scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.BH PQ: 0 ANSI: 5
[ 12.852000] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H HS02 PQ: 0 ANSI: 5
[ 12.856000] 8139cp 0000:08:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 12.856000] 8139cp 0000:08:08.0: Try the "8139too" driver instead.
[ 12.860000] 8139too Fast Ethernet driver 0.9.28
[ 12.860000] PCI: Enabling device 0000:08:08.0 (0105 -> 0107)
[ 12.860000] ACPI: PCI Interrupt 0000:08:08.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 12.860000] eth0: RealTek RTL8139 at 0xf884c000, 00:1b:38:37:1e:05, IRQ 20
[ 12.860000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 12.876000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 12.876000] sd 0:0:0:0: [sda] Write Protect is off
[ 12.876000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.876000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.876000] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 12.876000] sd 0:0:0:0: [sda] Write Protect is off
[ 12.876000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.876000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.876000] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 12.920000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 12.924000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 12.924000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 12.956000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 12.956000] Uniform CD-ROM driver Revision: 3.20
[ 12.956000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 13.256000] Attempting manual resume
[ 13.256000] swsusp: Resume From Partition 8:5
[ 13.256000] PM: Checking swsusp image.
[ 13.256000] PM: Resume from disk failed.
[ 13.272000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 13.272000] EXT3-fs: write access will be enabled during recovery.
[ 18.524000] kjournald starting. Commit interval 5 seconds
[ 18.524000] EXT3-fs: recovery complete.
[ 18.524000] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.392000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 24.564000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 24.576000] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.612000] agpgart: Detected an Intel 945GM Chipset.
[ 24.612000] agpgart: Detected 7932K stolen memory.
[ 24.628000] agpgart: AGP aperture is 256M @ 0xc0000000
[ 25.040000] iTCO_vendor_support: vendor-support=0
[ 25.096000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 25.096000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 25.096000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 25.432000] ieee80211_crypt: registered algorithm 'NULL'
[ 25.444000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 25.444000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 25.504000] intel_rng: FWH not detected
[ 25.520000] bcm43xx driver
[ 25.520000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 25.520000] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 25.808000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 25.808000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 26.140000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 26.200000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 26.508000] lp: driver loaded but no devices found
[ 26.548000] Adding 530104k swap on /dev/sda5. Priority:-1 extents:1 across:530104k
[ 26.768000] EXT3 FS on sda6, internal journal
[ 40.944000] kjournald starting. Commit interval 5 seconds
[ 40.944000] EXT3 FS on sda7, internal journal
[ 40.944000] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.940000] No dock devices found.
[ 42.000000] ACPI: AC Adapter [ACAD] (on-line)
[ 42.068000] ACPI: Battery Slot [BAT1] (battery absent)
[ 42.112000] input: Power Button (FF) as /class/input/input3
[ 42.116000] ACPI: Power Button (FF) [PWRF]
[ 42.116000] ACPI Error (evxfevnt-0186): Could not enable SleepButton event [20070126]
[ 42.116000] ACPI Warning (evxface-0145): Could not enable fixed event 3 [20070126]
[ 42.148000] input: Lid Switch as /class/input/input4
[ 42.152000] ACPI: Lid Switch [LID]
[ 42.184000] input: Power Button (CM) as /class/input/input5
[ 42.188000] ACPI: Power Button (CM) [PWRB]
[ 42.264000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 42.280000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 43.308000] ppdev: user-space parallel port driver
[ 43.580000] audit(1194457857.973:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4640 profile="/usr/sbin/cupsd"
[ 43.664000] apm: BIOS not found.
[ 44.328000] Failure registering capabilities with primary security module.
[ 44.640000] Bluetooth: Core ver 2.11
[ 44.640000] NET: Registered protocol family 31
[ 44.640000] Bluetooth: HCI device and connection manager initialized
[ 44.640000] Bluetooth: HCI socket layer initialized
[ 44.720000] Bluetooth: L2CAP ver 2.8
[ 44.720000] Bluetooth: L2CAP socket layer initialized
[ 44.768000] Bluetooth: RFCOMM socket layer initialized
[ 44.772000] Bluetooth: RFCOMM TTY layer initialized
[ 44.772000] Bluetooth: RFCOMM ver 1.8
[ 48.652000] [drm] Initialized drm 1.1.0 20060810
[ 48.672000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 48.676000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 49.420000] eth0: link down
[ 50.480000] NET: Registered protocol family 17
[ 50.872000] SoftMAC: Open Authentication completed with 00:13:64:35:d8:4e
[ 50.944000] ieee80211_crypt: registered algorithm 'WEP'
[ 101.368000] NET: Registered protocol family 10
[ 101.372000] lo: Disabled Privacy Extensions
[ 101.372000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 112.296000] eth1: no IPv6 routers present