rendered paste body[ 0.000000] Linux version 2.6.20-16-generic (root@king) (gcc version 4.1.2 (U
buntu 4.1.2-0ubuntu4)) #2 SMP Sun Sep 23 18:31:23 UTC 2007 (Ubuntu 2.6.20-16.32-
generic)
[ 0.000000] Command line: root=UUID=9df25e6c-7f9a-4748-ad17-b35e9e089513 ro q
uiet splash frontend noapic
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x0000
0000000f7b90
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x
000000003fff3040
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x
000000003fff30c0
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x
000000003fff9580
[ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x
000000003fff97c0
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x
000000003fff94c0
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x
0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000003fff0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 262128) 1 entries of 3200 used
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 262128
[ 0.000000] On node 0 totalpages: 262031
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1101 pages reserved
[ 0.000000] DMA zone: 2842 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3527 pages used for memmap
[ 0.000000] DMA32 zone: 254505 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTAB
LE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 at 0xFEC00000.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Processors: 2
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000
[ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a000
0000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 257347
[ 0.000000] Kernel command line: root=UUID=9df25e6c-7f9a-4748-ad17-b35e9e0895
13 ro quiet splash frontend noapic
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 22.489752] Console: colour VGA+ 80x25
[ 22.490346] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 22.491279] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 22.491382] Checking aperture...
[ 22.491385] CPU 0: aperture @ 2d40000000 size 32 MB
[ 22.491387] Aperture too small (32 MB)
[ 22.496126] No AGP bridge found
[ 22.507046] Memory: 1021088k/1048512k available (2218k kernel code, 27036k re
served, 1162k data, 304k init)
[ 22.585685] Calibrating delay using timer specific routine.. 4023.10 BogoMIPS
(lpj=8046215)
[ 22.585741] Security Framework v1.0.0 initialized
[ 22.585749] SELinux: Disabled at boot.
[ 22.585773] Mount-cache hash table entries: 256
[ 22.585915] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 22.585917] CPU: L2 Cache: 512K (64 bytes/line)
[ 22.585920] CPU 0/0 -> Node 0
[ 22.585922] CPU: Physical Processor ID: 0
[ 22.585923] CPU: Processor Core ID: 0
[ 22.585947] SMP alternatives: switching to UP code
[ 22.586218] Early unpacking initramfs... done
[ 22.872195] ACPI: Core revision 20060707
[ 22.874516] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found,
using machine DSDT.
[ 22.877418] ACPI: setting ELCR to 0200 (from 0c28)
[ 22.878367] Using local APIC timer interrupts.
[ 22.928077] result 12564474
[ 22.928078] Detected 12.564 MHz APIC timer.
[ 22.929678] SMP alternatives: switching to SMP code
[ 22.929810] Booting processor 1/2 APIC 0x1
[ 22.939866] Initializing CPU#1
[ 22.941021] spurious 8259A interrupt: IRQ7.
[ 23.017197] Calibrating delay using timer specific routine.. 4026.31 BogoMIPS
(lpj=8052639)
[ 23.017203] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 23.017205] CPU: L2 Cache: 512K (64 bytes/line)
[ 23.017208] CPU 1/1 -> Node 0
[ 23.017209] CPU: Physical Processor ID: 0
[ 23.017211] CPU: Processor Core ID: 1
[ 23.017290] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 23.021203] CPU 1: Syncing TSC to CPU 0.
[ 23.021500] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 52
5 cycles)
[ 23.021510] Brought up 2 CPUs
[ 23.021518] Disabling vsyscall due to use of PM timer
[ 23.021521] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[ 23.021523] time.c: Detected 2010.313 MHz processor.
[ 23.862225] migration_cost=209
[ 23.862556] Time: 5:25:05 Date: 10/07/107
[ 23.862596] NET: Registered protocol family 16
[ 23.862677] ACPI: bus type pci registered
[ 23.862683] PCI: Using configuration type 1
[ 23.869903] ACPI: Interpreter enabled
[ 23.869906] ACPI: Using PIC for interrupt routing
[ 23.870523] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 23.870527] PCI: Probing PCI hardware (bus 00)
[ 23.873020] PCI: Transparent bridge - 0000:00:09.0
[ 23.873229] Boot video device is 0000:05:00.0
[ 23.873286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 23.957818] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 23.960118] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *
0, disabled.
[ 23.960484] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *
0, disabled.
[ 23.960866] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 23.961231] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *
0, disabled.
[ 23.961596] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *
0, disabled.
[ 23.961960] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 23.962322] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *
0, disabled.
[ 23.962685] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 23.963049] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 23.963411] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *
0, disabled.
[ 23.963778] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 23.964140] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 23.964502] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *
0, disabled.
[ 23.964894] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 23.965265] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 23.965638] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *
0, disabled.
[ 23.966048] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 23.966457] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 23.966859] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 23.967261] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 23.967573] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 23.967994] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 23.968411] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 23.968842] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 23.969262] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 23.969679] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 23.970094] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 23.970511] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 23.970927] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 23.971352] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 23.971779] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 23.972209] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 23.975387] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 23.975398] pnp: PnP ACPI init
[ 23.982554] pnp: PnP ACPI: found 13 devices
[ 23.982612] PCI: Using ACPI for IRQ routing
[ 23.982616] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 23.982686] NET: Registered protocol family 8
[ 23.982688] NET: Registered protocol family 20
[ 23.983187] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
[ 23.983190] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[ 23.983193] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[ 23.983196] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
[ 23.983199] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[ 23.983202] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[ 23.983494] PCI: Bridge: 0000:00:09.0
[ 23.983497] IO window: a000-afff
[ 23.983500] MEM window: fde00000-fdefffff
[ 23.983503] PREFETCH window: fdf00000-fdffffff
[ 23.983506] PCI: Bridge: 0000:00:0b.0
[ 23.983508] IO window: 9000-9fff
[ 23.983510] MEM window: fdd00000-fddfffff
[ 23.983513] PREFETCH window: fdc00000-fdcfffff
[ 23.983515] PCI: Bridge: 0000:00:0c.0
[ 23.983517] IO window: 8000-8fff
[ 23.983520] MEM window: fdb00000-fdbfffff
[ 23.983523] PREFETCH window: fda00000-fdafffff
[ 23.983525] PCI: Bridge: 0000:00:0d.0
[ 23.983527] IO window: 7000-7fff
[ 23.983530] MEM window: fd900000-fd9fffff
[ 23.983533] PREFETCH window: fd800000-fd8fffff
[ 23.983538] PCI: Bridge: 0000:00:0e.0
[ 23.983540] IO window: 6000-6fff
[ 23.983542] MEM window: fa000000-fcffffff
[ 23.983545] PREFETCH window: d0000000-dfffffff
[ 23.983553] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 23.983560] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 23.983565] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 23.983571] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 23.983576] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 23.983621] NET: Registered protocol family 2
[ 24.020717] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 24.020933] TCP established hash table entries: 131072 (order: 9, 2097152 byt
es)
[ 24.022239] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 24.022904] TCP: Hash tables configured (established 131072 bind 65536)
[ 24.022908] TCP reno registered
[ 24.032772] checking if image is initramfs... it is
[ 24.598595] Freeing initrd memory: 6661k freed
[ 24.603115] audit: initializing netlink socket (disabled)
[ 24.603128] audit(1194413105.072:1): initialized
[ 24.603308] VFS: Disk quotas dquot_6.5.1
[ 24.603329] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 24.603375] io scheduler noop registered
[ 24.603377] io scheduler anticipatory registered
[ 24.603379] io scheduler deadline registered
[ 24.603393] io scheduler cfq registered (default)
[ 24.620202] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
[ 24.620209] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 24.620215] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
[ 24.620221] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 24.620227] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
[ 24.620233] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 24.620239] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
[ 24.620245] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 24.620412] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 24.620429] assign_interrupt_mode Found MSI capability
[ 24.620433] Allocate Port Service[0000:00:0b.0:pcie00]
[ 24.620493] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 24.620509] assign_interrupt_mode Found MSI capability
[ 24.620511] Allocate Port Service[0000:00:0c.0:pcie00]
[ 24.620569] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 24.620585] assign_interrupt_mode Found MSI capability
[ 24.620587] Allocate Port Service[0000:00:0d.0:pcie00]
[ 24.620643] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 24.620658] assign_interrupt_mode Found MSI capability
[ 24.620661] Allocate Port Service[0000:00:0e.0:pcie00]
[ 24.645412] Real Time Clock Driver v1.12ac
[ 24.645458] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.645461] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 24.645570] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 24.646096] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 24.646290] mice: PS/2 mouse device common for all mice
[ 24.646862] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 bloc
ksize
[ 24.647018] input: Macintosh mouse button emulation as /class/input/input0
[ 24.647053] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 24.647057] ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
[ 24.647210] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 24.647213] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 24.647519] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 24.647523] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 24.647621] TCP cubic registered
[ 24.647631] NET: Registered protocol family 1
[ 24.647700] ACPI: (supports S0 S3 S4 S5)
[ 24.647751] Magic number: 15:457:415
[ 24.647877] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 24.647963] Freeing unused kernel memory: 304k freed
[ 24.664601] input: AT Translated Set 2 keyboard as /class/input/input1
[ 25.814263] Capability LSM initialized
[ 25.846544] ACPI: Fan [FAN] (on)
[ 25.851502] ACPI: Thermal Zone [THRM] (34 C)
[ 26.302792] usbcore: registered new interface driver usbfs
[ 26.302814] usbcore: registered new interface driver hub
[ 26.335946] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[ 26.335967] NFORCE-CK804: chipset revision 243
[ 26.335970] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 26.335975] NFORCE-CK804: 0000:00:06.0 (rev f3) UDMA133 controller
[ 26.335984] ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DM
A
[ 26.335994] ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DM
A
[ 26.336002] Probing IDE interface ide0...
[ 26.345046] usbcore: registered new device driver usb
[ 26.345094] Floppy drive(s): fd0 is 1.44M
[ 26.346346] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0
.59.
[ 26.347309] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Dr
iver
[ 26.372100] FDC 0 is a post-1991 82077
[ 26.850579] hdb: Maxtor 6Y120P0, ATA DISK drive
[ 26.906753] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 26.922314] Probing IDE interface ide1...
[ 27.661970] hdc: LG CD-RW CED-8120B, ATAPI CD/DVD-ROM drive
[ 27.998531] ide1 at 0x170-0x177,0x376 on irq 15
[ 27.999875] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
[ 27.999878] PCI: setting IRQ 11 as level-triggered
[ 27.999881] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 11 (lev
el, low) -> IRQ 11
[ 27.999887] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 27.999895] forcedeth: using HIGHDMA
[ 28.521485] eth0: forcedeth.c: subsystem: 01019:1b13 bound to 0000:00:0a.0
[ 28.521991] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
[ 28.521996] PCI: setting IRQ 10 as level-triggered
[ 28.521999] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 10 (lev
el, low) -> IRQ 10
[ 28.522014] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 28.522018] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 28.522263] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus numbe
r 1
[ 28.522294] ehci_hcd 0000:00:02.1: debug port 1
[ 28.522298] PCI: cache line size of 64 is not supported by device 0000:00:02.
1
[ 28.522308] ehci_hcd 0000:00:02.1: irq 10, io mem 0xfe02e000
[ 28.522313] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 28.523441] usb usb1: configuration #1 chosen from 1 choice
[ 28.523620] hub 1-0:1.0: USB hub found
[ 28.523629] hub 1-0:1.0: 10 ports detected
[ 28.527430] SCSI subsystem initialized
[ 28.532875] libata version 2.20 loaded.
[ 28.632749] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 5
[ 28.632755] PCI: setting IRQ 5 as level-triggered
[ 28.632758] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 5 (leve
l, low) -> IRQ 5
[ 28.632776] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 28.632780] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 28.632812] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus numbe
r 2
[ 28.632830] ohci_hcd 0000:00:02.0: irq 5, io mem 0xfe02f000
[ 28.691248] usb usb2: configuration #1 chosen from 1 choice
[ 28.691275] hub 2-0:1.0: USB hub found
[ 28.691285] hub 2-0:1.0: 10 ports detected
[ 28.797137] sata_nv 0000:00:07.0: version 3.3
[ 28.797552] ACPI: PCI Interrupt Link [LSID] enabled at IRQ 10
[ 28.797555] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LSID] -> GSI 10 (lev
el, low) -> IRQ 10
[ 28.797567] sata_nv 0000:00:07.0: Using ADMA mode
[ 28.797586] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 28.797684] ata1: SATA max UDMA/133 cmd 0xffffc2000001e480 ctl 0xffffc2000001
e4a0 bmdma 0x000000000001d400 irq 10
[ 28.797731] ata2: SATA max UDMA/133 cmd 0xffffc2000001e580 ctl 0xffffc2000001
e5a0 bmdma 0x000000000001d408 irq 10
[ 28.797740] scsi0 : sata_nv
[ 29.052858] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 29.187051] usb 1-3: configuration #1 chosen from 1 choice
[ 29.268711] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 29.318549] ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625
142448
[ 29.318554] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[ 29.318557] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 29.385141] ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625
142448
[ 29.385146] ata1.00: configured for UDMA/133
[ 29.385149] ata1: EH pending after completion, repeating EH (cnt=4)
[ 29.385162] scsi1 : sata_nv
[ 29.492527] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 29.700368] ata2: SATA link down (SStatus 0 SControl 300)
[ 29.700489] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ
: 0 ANSI: 5
[ 29.700497] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFF
F, hw segs 61
[ 29.701570] ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11
[ 29.701573] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LFID] -> GSI 11 (lev
el, low) -> IRQ 11
[ 29.701584] sata_nv 0000:00:08.0: Using ADMA mode
[ 29.701601] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 29.701666] ata3: SATA max UDMA/133 cmd 0xffffc20000020480 ctl 0xffffc2000002
04a0 bmdma 0x000000000001c000 irq 11
[ 29.701713] ata4: SATA max UDMA/133 cmd 0xffffc20000020580 ctl 0xffffc2000002
05a0 bmdma 0x000000000001c008 irq 11
[ 29.701724] scsi2 : sata_nv
[ 29.714446] usb 2-2: configuration #1 chosen from 1 choice
[ 29.718123] usbcore: registered new interface driver libusual
[ 29.721334] Initializing USB Mass Storage driver...
[ 29.721421] scsi4 : SCSI emulation for USB Mass Storage devices
[ 29.721496] usb-storage: device found at 3
[ 29.721488] usbcore: registered new interface driver usb-storage
[ 29.721492] USB Mass Storage support registered.
[ 29.721506] usb-storage: waiting for device to settle before scanning
[ 30.016133] ata3: SATA link down (SStatus 0 SControl 300)
[ 30.016148] scsi3 : sata_nv
[ 30.327899] ata4: SATA link down (SStatus 0 SControl 300)
[ 30.338894] hdb: max request size: 128KiB
[ 30.339052] hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/
63, UDMA(133)
[ 30.339184] hdb: cache flushes supported
[ 30.339221] hdb: hdb1 < hdb5<5>SCSI device sda: 625142448 512-byte hdwr sect
ors (320073 MB)
[ 30.353956] sda: Write Protect is off
[ 30.353959] sda: Mode Sense: 00 3a 00 00
[ 30.353972] SCSI device sda: write cache: enabled, read cache: enabled, doesn
't support DPO or FUA
[ 30.354025] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[ 30.354033] sda: Write Protect is off
[ 30.354035] sda: Mode Sense: 00 3a 00 00
[ 30.354048] SCSI device sda: write cache: enabled, read cache: enabled, doesn
't support DPO or FUA
[ 30.354053] sda:<6>usbcore: registered new interface driver hiddev
[ 30.360682] hdb6<6>input: Logitech USB-PS/2 Optical Mouse as /class/input/in
put2
[ 30.361304] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on u
sb-0000:00:02.0-2
[ 30.361319] usbcore: registered new interface driver usbhid
[ 30.361322] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 30.374083] unknown partition table
[ 30.374275] sd 0:0:0:0: Attached scsi disk sda
[ 30.377536] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 30.378907] hdb7 >
[ 30.381354] hdc: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache, DMA
[ 30.381363] Uniform CD-ROM driver Revision: 3.20
[ 30.966123] Attempting manual resume
[ 30.966127] swsusp: Resume From Partition 3:71
[ 30.966129] PM: Checking swsusp image.
[ 30.979516] PM: Resume from disk failed.
[ 30.994475] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 30.994479] EXT3-fs: write access will be enabled during recovery.
[ 34.720471] usb-storage: device scan complete
[ 34.723343] scsi 4:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 2.17 PQ
: 0 ANSI: 2
[ 34.731701] SCSI device sdb: 4001425 512-byte hdwr sectors (2049 MB)
[ 34.737692] sdb: Write Protect is off
[ 34.737695] sdb: Mode Sense: 03 00 00 00
[ 34.737696] sdb: assuming drive cache: write through
[ 34.754682] SCSI device sdb: 4001425 512-byte hdwr sectors (2049 MB)
[ 34.760673] sdb: Write Protect is off
[ 34.760674] sdb: Mode Sense: 03 00 00 00
[ 34.760676] sdb: assuming drive cache: write through
[ 34.760706] sdb: sdb1
[ 34.765243] sd 4:0:0:0: Attached scsi removable disk sdb
[ 34.765278] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 37.104137] kjournald starting. Commit interval 5 seconds
[ 37.104171] EXT3-fs: hdb6: orphan cleanup on readonly fs
[ 37.104180] ext3_orphan_cleanup: deleting unreferenced inode 3080293
[ 37.231449] ext3_orphan_cleanup: deleting unreferenced inode 3031127
[ 37.245911] ext3_orphan_cleanup: deleting unreferenced inode 3031126
[ 37.252496] ext3_orphan_cleanup: deleting unreferenced inode 3031125
[ 37.252506] ext3_orphan_cleanup: deleting unreferenced inode 3031124
[ 37.252525] ext3_orphan_cleanup: deleting unreferenced inode 3031123
[ 37.252535] ext3_orphan_cleanup: deleting unreferenced inode 3031121
[ 37.252541] ext3_orphan_cleanup: deleting unreferenced inode 3031120
[ 37.252548] ext3_orphan_cleanup: deleting unreferenced inode 3031119
[ 37.252555] ext3_orphan_cleanup: deleting unreferenced inode 3031118
[ 37.291536] ext3_orphan_cleanup: deleting unreferenced inode 3031117
[ 37.363112] ext3_orphan_cleanup: deleting unreferenced inode 3031047
[ 37.370120] ext3_orphan_cleanup: deleting unreferenced inode 4800776
[ 37.370138] EXT3-fs: hdb6: 13 orphan inodes deleted
[ 37.370140] EXT3-fs: recovery complete.
[ 37.679812] EXT3-fs: mounted filesystem with ordered data mode.
[ 66.537793] NET: Registered protocol family 17
[ 66.599876] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 66.662717] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 66.662758] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 66.669159] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 66.711076] parport: PnPBIOS parport detected.
[ 66.711153] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE
,COMPAT,ECP,DMA]
[ 66.729397] input: PC Speaker as /class/input/input3
[ 66.977882] nvidia: module license 'NVIDIA' taints kernel.
[ 67.233271] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5
[ 67.233276] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNK3] -> GSI 5 (leve
l, low) -> IRQ 5
[ 67.233285] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 67.233495] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9755 Mon Feb
26 23:16:31 PST 2007
[ 67.560903] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 3
[ 67.560908] PCI: setting IRQ 3 as level-triggered
[ 67.560911] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LACI] -> GSI 3 (leve
l, low) -> IRQ 3
[ 67.560944] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 67.879301] intel8x0_measure_ac97_clock: measured 54895 usecs
[ 67.879303] intel8x0: clocking to 46914
[ 67.998157] lp0: using parport0 (interrupt-driven).
[ 68.045904] Adding 1052216k swap on /dev/disk/by-uuid/66802bd6-95ef-46f5-8c24
-7ad89bd257db. Priority:-1 extents:1 across:1052216k
[ 68.211418] EXT3 FS on hdb6, internal journal
[ 78.759221] input: Power Button (FF) as /class/input/input4
[ 78.759246] ACPI: Power Button (FF) [PWRF]
[ 78.759285] input: Power Button (CM) as /class/input/input5
[ 78.759302] ACPI: Power Button (CM) [PWRB]
[ 78.796182] Using specific hotkey driver
[ 78.839165] No dock devices found.
[ 78.874938] ibm_acpi: ec object not found
[ 79.016880] pcc_acpi: loading...
[ 79.233125] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 380
0+ processors (version 2.00.00)
[ 79.233233] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe
[ 79.233238] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10
[ 79.233240] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 98.965858] NET: Registered protocol family 10
[ 98.965961] lo: Disabled Privacy Extensions
[ 104.387318] eth0: no IPv6 routers present
[ 311.282438] gaim[5521]: segfault at 00002b5a302e74b0 rip 00002b5a302e74b0 rsp
00007fff882426a8 error 14
[ 371.179749] eth0: no IPv6 routers present
[ 461.027820] eth0: link down.