Unbenannt

Fusion MPT base driver 3.04.01
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.01
GSI 20 sharing vector 0x42 and IRQ 20
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 28 (level, low) -> IRQ 66
mptbase: Initiating ioc0 bringup
mptbase::MakeIocReady, ioc0 [raw] state=22000000
mptbase: ioc0: HandShake request start reqBytes=12, WaitCnt=1
mptbase: Handshake request frame (@ffff81011a07b9b8) header
mptbase: ioc0: HandShake request post done, WaitCnt=0
mptbase: ioc0: WaitCnt=1 First handshake reply word=030f0102
mptbase: ioc0: Got Handshake reply:
mptbase: ioc0: WaitForDoorbell REPLY WaitCnt=1 (sz=15)
mptbase: ioc0: HandShake reply count=15
mptbase: ioc0: HandShake request start reqBytes=12, WaitCnt=1
mptbase: Handshake request frame (@ffff81011a07b9a8) header
mptbase: ioc0: HandShake request post done, WaitCnt=0
mptbase: ioc0: WaitCnt=1 First handshake reply word=050a0000
mptbase: ioc0: Got Handshake reply:
mptbase: ioc0: WaitForDoorbell REPLY WaitCnt=1 (sz=10)
mptbase: ioc0: HandShake reply count=10
ioc0: 53C1030: Capabilities={Initiator}
mptbase: ioc0: Sending IOCInit (req @ ffff81011a07b948)
mptbase: ioc0: HandShake request start reqBytes=44, WaitCnt=1
mptbase: Handshake request frame (@ffff81011a07b948) header
mptbase: ioc0: HandShake request post done, WaitCnt=0
mptbase: ioc0: WaitCnt=1 First handshake reply word=02050004
mptbase: ioc0: Got Handshake reply:
mptbase: ioc0: WaitForDoorbell REPLY WaitCnt=1 (sz=5)
mptbase: ioc0: HandShake reply count=5
mptbase: ioc0: Sending PortEnable (req @ ffff81011a07b948)
mptbase: ioc0: HandShake request start reqBytes=12, WaitCnt=1
mptbase: Handshake request frame (@ffff81011a07b9b8) header
mptbase: ioc0: HandShake request post done, WaitCnt=0
mptbase: ioc0: WaitCnt=1 First handshake reply word=06050000
mptbase: ioc0: Got Handshake reply:
mptbase: ioc0: WaitForDoorbell REPLY WaitCnt=1 (sz=5)
mptbase: ioc0: HandShake reply count=5
scsi5 : ioc0: LSI53C1030, FwRev=01033010h, Ports=1, MaxQ=222, IRQ=66
mptbase: ioc0: mpt_send_handshake_request start, WaitCnt=1
  Vendor: HP        Model: Ultrium 4-SCSI    Rev: B12H
  Type:   Sequential-Access                  ANSI SCSI revision: 05
Disabling QAS due to noQas=01 on id=1!
 target5:0:1: Beginning Domain Validation
 target5:0:1: Ending Domain Validation
 target5:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 64)
  Vendor: OVERLAND  Model: NEO Series        Rev: 0602
  Type:   Medium Changer                     ANSI SCSI revision: 02
 target5:0:6: Beginning Domain Validation
 target5:0:6: Domain Validation skipping write tests
 target5:0:6: Ending Domain Validation
 target5:0:6: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15)
GSI 21 sharing vector 0x4A and IRQ 21
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 52 (level, low) -> IRQ 74
mptbase: Initiating ioc1 bringup
mptbase::MakeIocReady, ioc1 [raw] state=22000000
mptbase: ioc1: HandShake request start reqBytes=12, WaitCnt=1
mptbase: Handshake request frame (@ffff81011a07b9b8) header
mptbase: ioc1: HandShake request post done, WaitCnt=0
mptbase: ioc1: WaitCnt=1 First handshake reply word=030f0102
mptbase: ioc1: Got Handshake reply:
mptbase: ioc1: WaitForDoorbell REPLY WaitCnt=1 (sz=15)
mptbase: ioc1: HandShake reply count=15
mptbase: ioc1: HandShake request start reqBytes=12, WaitCnt=1
mptbase: Handshake request frame (@ffff81011a07b9a8) header
mptbase: ioc1: HandShake request post done, WaitCnt=0
mptbase: ioc1: WaitCnt=1 First handshake reply word=050a0000
mptbase: ioc1: Got Handshake reply:
mptbase: ioc1: WaitForDoorbell REPLY WaitCnt=1 (sz=10)
mptbase: ioc1: HandShake reply count=10
ioc1: 53C1030: Capabilities={Initiator}
mptbase: ioc1: Sending IOCInit (req @ ffff81011a07b948)
mptbase: ioc1: HandShake request start reqBytes=44, WaitCnt=1
mptbase: Handshake request frame (@ffff81011a07b948) header
mptbase: ioc1: HandShake request post done, WaitCnt=0
mptbase: ioc1: WaitCnt=1 First handshake reply word=02050004
mptbase: ioc1: Got Handshake reply:
mptbase: ioc1: WaitForDoorbell REPLY WaitCnt=1 (sz=5)
mptbase: ioc1: HandShake reply count=5
mptbase: ioc1: Sending PortEnable (req @ ffff81011a07b948)
mptbase: ioc1: HandShake request start reqBytes=12, WaitCnt=1
mptbase: Handshake request frame (@ffff81011a07b9b8) header
mptbase: ioc1: HandShake request post done, WaitCnt=0
mptbase: ioc1: WaitCnt=1 First handshake reply word=06050000
mptbase: ioc1: Got Handshake reply:
mptbase: ioc1: WaitForDoorbell REPLY WaitCnt=1 (sz=5)
mptbase: ioc1: HandShake reply count=5
scsi6 : ioc1: LSI53C1030, FwRev=01033010h, Ports=1, MaxQ=222, IRQ=74
mptbase: ioc1: mpt_send_handshake_request start, WaitCnt=1
  Vendor: HP        Model: Ultrium 4-SCSI    Rev: B12H
  Type:   Sequential-Access                  ANSI SCSI revision: 05
Disabling QAS due to noQas=01 on id=2!
 target6:0:2: Beginning Domain Validation
 target6:0:2: Domain Validation skipping write tests
 target6:0:2: Ending Domain Validation
 target6:0:2: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 64)