All pastes #762104 Raw Edit

Unbenannt

public text v1 · immutable
·published 2007-11-05 11:19 UTC
rendered paste body
Memory Test:    OK                                             
Run on SDRAM:   OK                                            
SA100 Boot Loader v1.07 (05/21/2004)
List PCI device:
bus 00 device 0c function  0: vendorid 10ec, deviceid 8139
bus 00 device 0d function  0: vendorid 10ec, deviceid 8139
bus 00 device 0e function  0: vendorid 1095, deviceid 0649
bus 00 device 0f function  0: vendorid 1131, deviceid 1561
bus 00 device 0f function  1: vendorid 1131, deviceid 1561
bus 00 device 0f function  2: vendorid 1131, deviceid 1562
Test 8100B-1:   OK
Test 8100B-2:   OK
flash 0: family code = c2a8
.....................................................................................Processor ID:2
boot: rw root=/dev/ramdisk console=ttyS0,115200
CPU revision is: 00002242
Primary instruction cache 8kB, linesize 16 bytes
Primary data cache 4kB, linesize 16 bytes
Linux version 2.4.32-mct (andi@monitor.psms.ez-nord.de) (gcc version 3.3.6) #2 Fr M�är 3 13:50:30 6
TX3927 -- CRIR:39270040 CCFG:0006b039 PCFG:007c1000
TX3927 PCIC -- DID:000a VID:102f RID:07 Arbiter:Internal
TX39XX D-Cache WriteBack (CWF) .
Determined physical RAM map:
 memory: 01ffff00 @ 00000000 (usable)
On node 0 totalpages: 8191
zone(0): 4096 pages.
zone(1): 4095 pages.
zone(2): 0 pages.
Kernel command line: rw root=/dev/ramdisk console=ttyS0,115200
S3511A: 00 01 01 00 00 00 00
Calibrating delay loop... 132.30 BogoMIPS
Memory: 25184k/32764k available (2463k kernel code, 7580k reserved, 105k data, 112k init, 0k highm)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction...  available.
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
PCI: IO 0x00000000-0x00ffffff MEM 0x08000000-0x0fffffff
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
mct 0.2 initialised
Power: function of power button was initialised
pty: 256 Unix98 ptys configured
TXx927 Serial driver version 0.21
ttyS00 at 0xfffef300 (irq = 22) is a TXx927 SIO
ttyS01 at 0xfffef400 (irq = 23) is a TXx927 SIO
Generic MIPS RTC Driver v1.0
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 at 0xa8082000, 00:66:3f:d3:6d:3f, IRQ 16
eth1: RealTek RTL8139 at 0xa8082400, 00:3a:09:01:40:09, IRQ 17
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CMD649: IDE controller at PCI slot 00:0e.0
CMD649: chipset revision 2
CMD649: 100% native mode on irq 18
    ide0: BM-DMA at 0x8800-0x8807, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x8808-0x880f, BIOS settings: hdc:pio, hdd:pio
SCSI subsystem driver Revision: 1.00
MCT flash driver (size->0x400000 mem->0x1FC00000)
CFI: Found no MCT flash memory device at location zero
 Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Creating 5 MTD partitions on "MCT flash memory":
0x00000000-0x00020000 : "Bootloader"
0x00020000-0x00130000 : "Kernel"
0x00130000-0x003f0000 : "Root"
0x003f0000-0x00400000 : "Reserved"
0x00020000-0x00400000 : "Flash (without Bootloader)"
usb.c: registered new driver hub
host/usb-ohci.c: USB OHCI at membase 0xa8080000, IRQ 19
host/usb-ohci.c: usb-00:0f.0, PCI device 1131:1561
usb.c: new USB bus registered, assigned bus number 1
Product: USB OHCI Root Hub
SerialNumber: a8080000
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-ohci.c: USB OHCI at membase 0xa8081000, IRQ 19
host/usb-ohci.c: usb-00:0f.1, PCI device 1131:1561
usb.c: new USB bus registered, assigned bus number 2
Product: USB OHCI Root Hub
SerialNumber: a8081000
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usbscanner
scanner.c: 0.4.16:USB Scanner Driver
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IPv4 over IPv4 tunneling driver
ip_conntrack version 2.1 (255 buckets, 2040 max) - 288 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
FAT: bogus logical sector size 65508
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 112k freed
Algorithmics/MIPS FPU Emulator v1.5
Mounting Data ... grsec: mount of proc to /proc by /sbin/busybox[mount:4368] uid/euid:0/0 gid/egid0
grsec: mount of tmpfs to /tmp by /sbin/busybox[mount:4368] uid/euid:0/0 gid/egid:0/0, parent /etc/0
mount: Mounting /dev/discs/disc0/part2 on /usr failed: No such file or directory

Added /usr/lib directory ... /sbin/ldconfig: skipping /usr/lib: No such file or directory
/sbin/ldconfig: skipping /usr/lib: No such file or directory

Setting Hostname ... 
Starting Network ...udhcpc (v0.9.9-pre) started
Jan  1 01:00:12 udhcpc[20885]: udhcpc (v0.9.9-pre) started
adapter index 2
Jan  1 01:00:12 udhcpc[20885]: adapter index 2
adapter hardware address 00:66:3f:d3:6d:3f
Jan  1 01:00:12 udhcpc[20885]: adapter hardware address 00:66:3f:d3:6d:3f
vforking and execle'ing /share/udhcpc/default.script