rendered paste body <130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
0x00004786 ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
0x00004786 ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
0x00004786 ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <84000100> SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
0x00004786 ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
Received a UCD for Upstream Channel 4!
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898630> T501.0 Acquired Downstream (633000000 Hz)........ SUCCESS
0x000047ea ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
Done w/ deferred msgs
CM>
Received a UCD for Upstream Channel 1!
Received a UCD for Upstream Channel 2!
Received a UCD for Upstream Channel 3!
Received a UCD for Upstream Channel 4!
Selecting UCD for Us Channel 4
BcmCmUsPhyOverheadSettings::ComputeReqDataPhyToMacTable() burst descriptor not found for kReqDataIUC.
Upstream Frequency = 33000000
Found QAM16 = false
0x00004bc8 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) entering...
new_us_scdma_enabled = false
fLastDsClockModeIsScdma = false
fCmDsTargetingState = kDsOkUsPending
IsDccContext() = false
0x00004bc8 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) ds time sync should be ok. resume us init now.
0x00004bd2 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using default initial upstream power = 8.0 dBmV
Logging event: T501.0 Acquired Downstream (633000000 Hz)........ SUCCESS
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898630> T501.0 Acquired Downstream (633000000 Hz)........ SUCCESS
0x00004bdc ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
CM> Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <82000200> No Ranging Response received - T3 time-out
0x00004db2 ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
CM> Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <82000200> No Ranging Response received - T3 time-out
0x0000519a ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
RNG-RSP Adj: tim=5439 power=8 freq=0 Stat=Continue
0x000052f8 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::RngRspMsgEvent: (CmDocsisCtlThread) WARNING - Calling PreRegUsChanChange! Appendix H stuff...
Deleting DOCSIS 1.0 CoS Settings for SID 0x0
0x000053ca ['CmDocsisCtlThread' id=0x807bda80] BcmDocsisCmHalIf::DeleteAllServiceFlows: (DOCSIS CableModem HalIf) Deleting all Upstream and Downstream Service Flows, along with associated Classifiers and PHS rules...
Stopping DHCP/ToD/TFTP (client requested)...
BcmSnmpAgent::RestartPendingEvent for SB5100 CM Agent
SB5100 CM Agent setting V1/V2 view to
SB5100 CM Agent sending deferred traps...
Done w/ deferred traps.
SB5100 CM Agent ConfigIp: Ip=0.0.0.0, Subnet=0.0.0.0, Gateway=0.0.0.0
Ip addr is the same, not rebinding.
v1Trap: linkDownTrap(if2) 192.168.100.1->192.168.100.10:226, cmty="public"
CmSnmpAgent::ResetMibDefaults not restting due to factory mode
SB5100 CPE Agent setting V1/V2 view to docsisNmAccessView
Non-Vol Settings successfully written to the device.
0x000053d4 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ResetRngState: (CmDocsisCtlThread)
0x000053d4 ['CmPropaneCtlThread' id=0x807b9800] BcmCmPropaneCtlThread::ServiceMessageQueue: (CmPropaneCtlThread) WARNING - Didn't handle command IpAddressLost in the current state (2, PropaneCmInitial)!
SB5100 CM Event Log sending deferred async messages...
Done w/ deferred msgs
CM>
Received a UCD for Upstream Channel 1!
Received a UCD for Upstream Channel 2!
Received a UCD for Upstream Channel 3!
Received a UCD for Upstream Channel 4!
Received a UCD for Upstream Channel 1!
Selecting UCD for Us Channel 2
BcmCmUsPhyOverheadSettings::ComputeReqDataPhyToMacTable() burst descriptor not found for kReqDataIUC.
Upstream Frequency = 33000000
Found QAM16 = false
0x00005910 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) entering...
new_us_scdma_enabled = false
fLastDsClockModeIsScdma = false
fCmDsTargetingState = kDsOkUsPending
IsDccContext() = false
0x0000591a ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::TestAndLaunchDsTimeSync: (CmDocsisCtlThread) ds time sync should be ok. resume us init now.
0x0000591a ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::DsSyncOkResumeUsInit: (CmDocsisCtlThread) pre-REG upstream target case...starting initial ranging.
Beginning initial ranging...
Using default initial upstream power = 8.0 dBmV
Logging event: T501.0 Acquired Downstream (633000000 Hz)........ SUCCESS
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898630> T501.0 Acquired Downstream (633000000 Hz)........ SUCCESS
0x0000592e ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
CM> Adjusting the initial ranging power to 33.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <82000200> No Ranging Response received - T3 time-out
0x00005bc2 ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
CM> Adjusting the initial ranging power to 46.0 dBmV...
Logging event: No Ranging Response received - T3 time-out
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <82000200> No Ranging Response received - T3 time-out
0x00006072 ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
RNG-RSP Adj: tim=2879 power=8 freq=0 Stat=Continue
0x000068e2 ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ConfigStationMaint: (CmDocsisCtlThread)
config is kStationMaintenance mode.
RNG-RSP Adj: tim=0 power=8 freq=0 Stat=Continue
RNG-RSP Adj: tim=0 power=8 freq=0 Stat=Continue
RNG-RSP Adj: tim=0 power=8 freq=0 Stat=Success
0x00006b9e ['CmDocsisCtlThread' id=0x807bda80] BcmCmDocsisCtlThread::ConfigStationMaint: (CmDocsisCtlThread)
config is kPeriodicRanging mode.
******************************************
UPSTREAM STATUS
******************************************
Upstream Status = UP
Upstream Channel = 2
Upstream Frequency = 33000000 Hz
Upstream Power = 54 dBmV
Ranging SID = 0x176d
Upstream Symbol Rate = 2560000 sym/sec
******************************************
Starting IP Initialization with DHCP...
DHCPc: Waiting 3 seconds before sending Discover; client id htype=1, value=00:14:e8:2c:9f:ec
Logging event: T500.0 Acquired Upstream .......... SUCCESS
Sending syslog message from IF 1 to 192.168.100.10:
<134> CABLEMODEM [Motorola Corporation]: <2223898629> T500.0 Acquired Upstream .......... SUCCESS
0x00006b9e ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
v1Trap: cmTrapLog 192.168.100.1->192.168.100.10:226, cmty="public"
CM> DHCPc: Sending Discover packet; client id htype=1, value=00:14:e8:2c:9f:ec
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:14:e8:2c:9f:ec
DHCPc: No valid offers to select; need to send discover again.
DHCPc: Sending Discover packet; client id htype=1, value=00:14:e8:2c:9f:ec
Logging event: DHCP FAILED - Discover sent, no offer received
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <68000100> DHCP FAILED - Discover sent, no offer received
0x000086f6 ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
CM> DHCPc: Timed out waiting for offers for lease with client id htype=1, value=00:14:e8:2c:9f:ec
DHCPc: No valid offers to select; need to send discover again.
DHCPc: Sending Discover packet; client id htype=1, value=00:14:e8:2c:9f:ec
Logging event: DHCP FAILED - Discover sent, no offer received
Sending syslog message from IF 1 to 192.168.100.10:
<130> CABLEMODEM [DOCSIS]: <68000100> DHCP FAILED - Discover sent, no offer received
0x0000a636 ['Event Log Thread' id=0x807b4820] BcmVxSocket::Sendto: ERROR - SOCKET_ERROR: 65
docsDevEvSyslog::Send - sendto failure -1
CM>