rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
[ 0.000000] BIOS-e820: 000000003f690000 - 000000003f69b000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f69b000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7940
[ 0.000000] Entering add_active_range(0, 0, 259728) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259728
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259728
[ 0.000000] On node 0 totalpages: 259728
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30115 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7870 checksum 0
[ 0.000000] ACPI: RSDP 000F7870, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3F6934ED, 0040 (r1 PTLTD RSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3F69AE20, 0074 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: DSDT 3F693EEB, 6F35 (r1 INTEL CALISTGA 6040000 MSFT 2000002)
[ 0.000000] ACPI: FACS 3F69BFC0, 0040
[ 0.000000] ACPI: APIC 3F69AE94, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 3F69AEFC, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 3F69AF34, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: APIC 3F69AF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3F69AFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 3F69352D, 04F6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 257699
[ 0.000000] Kernel command line: root=UUID=7370f409-4aeb-4daa-87f3-894bbfe37e7b ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1600.202 MHz processor.
[ 13.489318] Console: colour VGA+ 80x25
[ 13.489613] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 13.490006] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 13.523395] Memory: 1018304k/1038912k available (2015k kernel code, 19908k reserved, 916k data, 364k init, 121408k highmem)
[ 13.523405] virtual kernel memory layout:
[ 13.523406] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 13.523407] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 13.523409] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 13.523410] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 13.523412] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 13.523413] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 13.523415] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 13.523418] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 13.523455] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 13.523607] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 13.523613] hpet0: 3 64-bit timers, 14318180 Hz
[ 13.604509] Calibrating delay using timer specific routine.. 3203.77 BogoMIPS (lpj=6407545)
[ 13.604530] Security Framework v1.0.0 initialized
[ 13.604537] SELinux: Disabled at boot.
[ 13.604553] Mount-cache hash table entries: 512
[ 13.604675] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[ 13.604684] monitor/mwait feature present.
[ 13.604686] using mwait in idle threads.
[ 13.604690] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 13.604693] CPU: L2 cache: 2048K
[ 13.604695] CPU: Physical Processor ID: 0
[ 13.604697] CPU: Processor Core ID: 0
[ 13.604700] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[ 13.604709] Compat vDSO mapped to ffffe000.
[ 13.604721] Checking 'hlt' instruction... OK.
[ 13.620597] SMP alternatives: switching to UP code
[ 13.621049] Early unpacking initramfs... done
[ 13.982464] ACPI: Core revision 20070126
[ 13.982540] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 13.986728] CPU0: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
[ 13.986746] SMP alternatives: switching to SMP code
[ 13.986873] Booting processor 1/1 eip 3000
[ 13.997118] Initializing CPU#1
[ 14.075780] Calibrating delay using timer specific routine.. 3200.16 BogoMIPS (lpj=6400332)
[ 14.075787] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[ 14.075792] monitor/mwait feature present.
[ 14.075796] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 14.075798] CPU: L2 cache: 2048K
[ 14.075801] CPU: Physical Processor ID: 0
[ 14.075802] CPU: Processor Core ID: 1
[ 14.075804] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[ 14.076434] CPU1: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
[ 14.076459] Total of 2 processors activated (6403.93 BogoMIPS).
[ 14.076657] ENABLING IO-APIC IRQs
[ 14.076865] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 14.223654] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 14.243644] Brought up 2 CPUs
[ 14.388874] migration_cost=48
[ 14.389024] Booting paravirtualized kernel on bare hardware
[ 14.389102] Time: 13:41:18 Date: 10/04/107
[ 14.389124] NET: Registered protocol family 16
[ 14.389220] EISA bus registered
[ 14.389225] ACPI: bus type pci registered
[ 14.414369] PCI: PCI BIOS revision 2.10 entry at 0xfd6f2, last bus=11
[ 14.414372] PCI: Using configuration type 1
[ 14.414374] Setting up standard PCI resources
[ 14.417095] ACPI: EC: Look up EC in DSDT
[ 14.417754] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 14.438413] ACPI: System BIOS is requesting _OSI(Linux)
[ 14.438416] ACPI: Please test with "acpi_osi=!Linux"
[ 14.438417] Please send dmidecode to linux-acpi@vger.kernel.org
[ 14.438838] ACPI: Interpreter enabled
[ 14.438841] ACPI: (supports S0 S3 S4 S5)
[ 14.438858] ACPI: Using IOAPIC for interrupt routing
[ 14.443579] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 14.443633] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 14.443643] PCI: Probing PCI hardware (bus 00)
[ 14.444443] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 14.444448] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 14.445580] PCI: Transparent bridge - 0000:00:1e.0
[ 14.445738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 14.446075] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 14.446213] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 14.446348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 14.446484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 14.446634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 14.451017] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 14.451125] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 14.451238] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 14.451345] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 14.451451] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 14.451556] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 14.451662] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 14.451768] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 14.451897] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 14.451910] pnp: PnP ACPI init
[ 14.451918] ACPI: bus type pnp registered
[ 14.453556] pnp: PnP ACPI: found 9 devices
[ 14.453559] ACPI: ACPI bus type pnp unregistered
[ 14.453562] PnPBIOS: Disabled by ACPI PNP
[ 14.453608] PCI: Using ACPI for IRQ routing
[ 14.453611] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 14.453616] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 14.453665] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 14.453710] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 14.453756] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[ 14.453801] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[ 14.453847] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[ 14.453894] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[ 14.453940] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[ 14.453986] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
[ 14.454032] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3
[ 14.454078] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3
[ 14.454124] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.3
[ 14.486393] NET: Registered protocol family 8
[ 14.486395] NET: Registered protocol family 20
[ 14.486471] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 14.486475] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 14.486479] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 14.486482] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 14.486489] pnp: 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 14.487155] Time: tsc clocksource has been installed.
[ 14.487171] Switched to high resolution mode on CPU 0
[ 14.487267] Switched to high resolution mode on CPU 1
[ 14.516838] PCI: Bridge: 0000:00:1c.0
[ 14.516840] IO window: disabled.
[ 14.516846] MEM window: 54000000-540fffff
[ 14.516851] PREFETCH window: disabled.
[ 14.516857] PCI: Bridge: 0000:00:1c.1
[ 14.516859] IO window: disabled.
[ 14.516865] MEM window: disabled.
[ 14.516869] PREFETCH window: disabled.
[ 14.516875] PCI: Bridge: 0000:00:1c.2
[ 14.516877] IO window: disabled.
[ 14.516883] MEM window: disabled.
[ 14.516888] PREFETCH window: disabled.
[ 14.516893] PCI: Bridge: 0000:00:1c.3
[ 14.516895] IO window: disabled.
[ 14.516901] MEM window: disabled.
[ 14.516905] PREFETCH window: disabled.
[ 14.516914] PCI: Bus 11, cardbus bridge: 0000:0a:09.0
[ 14.516917] IO window: 00002400-000024ff
[ 14.516922] IO window: 00002800-000028ff
[ 14.516927] PREFETCH window: 50000000-53ffffff
[ 14.516933] MEM window: 58000000-5bffffff
[ 14.516938] PCI: Bridge: 0000:00:1e.0
[ 14.516942] IO window: 2000-2fff
[ 14.516948] MEM window: b0300000-b03fffff
[ 14.516953] PREFETCH window: 50000000-53ffffff
[ 14.516982] PCI: Enabling device 0000:00:1c.0 (0000 -> 0002)
[ 14.516990] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 14.516999] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 14.517024] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
[ 14.517032] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 14.517056] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 14.517064] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 14.517089] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 14.517097] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 14.517113] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 14.517132] ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 14.517148] NET: Registered protocol family 2
[ 14.563027] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 14.563087] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 14.564216] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 14.564618] TCP: Hash tables configured (established 131072 bind 65536)
[ 14.564622] TCP reno registered
[ 14.579140] checking if image is initramfs... it is
[ 15.297366] Freeing initrd memory: 7064k freed
[ 15.297487] Simple Boot Flag at 0x3e set to 0x1
[ 15.298047] audit: initializing netlink socket (disabled)
[ 15.298063] audit(1194183678.340:1): initialized
[ 15.298177] highmem bounce pool size: 64 pages
[ 15.300268] VFS: Disk quotas dquot_6.5.1
[ 15.300323] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 15.300421] io scheduler noop registered
[ 15.300424] io scheduler anticipatory registered
[ 15.300426] io scheduler deadline registered
[ 15.300442] io scheduler cfq registered (default)
[ 15.300458] Boot video device is 0000:00:02.0
[ 15.300640] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 15.300700] assign_interrupt_mode Found MSI capability
[ 15.300703] Allocate Port Service[0000:00:1c.0:pcie00]
[ 15.300742] Allocate Port Service[0000:00:1c.0:pcie02]
[ 15.300843] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 15.300902] assign_interrupt_mode Found MSI capability
[ 15.300905] Allocate Port Service[0000:00:1c.1:pcie00]
[ 15.300938] Allocate Port Service[0000:00:1c.1:pcie02]
[ 15.301042] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 15.301101] assign_interrupt_mode Found MSI capability
[ 15.301104] Allocate Port Service[0000:00:1c.2:pcie00]
[ 15.301136] Allocate Port Service[0000:00:1c.2:pcie02]
[ 15.301237] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 15.301296] assign_interrupt_mode Found MSI capability
[ 15.301299] Allocate Port Service[0000:00:1c.3:pcie00]
[ 15.301333] Allocate Port Service[0000:00:1c.3:pcie02]
[ 15.301503] isapnp: Scanning for PnP cards...
[ 15.655060] isapnp: No Plug & Play device found
[ 15.679108] Real Time Clock Driver v1.12ac
[ 15.679347] hpet_resources: 0xfed00000 is busy
[ 15.679384] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 15.680533] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 15.680766] input: Macintosh mouse button emulation as /class/input/input0
[ 15.680844] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 15.684892] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 15.685882] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 15.685888] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 15.685891] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 15.685893] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 15.685896] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 15.686080] mice: PS/2 mouse device common for all mice
[ 15.686292] EISA: Probing bus 0 at eisa.0
[ 15.686300] Cannot allocate resource for EISA slot 1
[ 15.686304] Cannot allocate resource for EISA slot 2
[ 15.686332] EISA: Detected 0 cards.
[ 15.686523] TCP cubic registered
[ 15.686542] NET: Registered protocol family 1
[ 15.686566] Using IPI No-Shortcut mode
[ 15.686735] Magic number: 15:839:684
[ 15.686873] hash matches device full
[ 15.687089] Freeing unused kernel memory: 364k freed
[ 15.765701] input: AT Translated Set 2 keyboard as /class/input/input1
[ 16.897974] AppArmor: AppArmor initialized<5>audit(1194183679.840:2): type=1505 info="AppArmor initialized" pid=1232
[ 16.904058] fuse init (API version 7.8)
[ 16.908653] Failure registering capabilities with primary security module.
[ 16.932165] ACPI: SSDT 3F693C78, 01EA (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 16.932399] ACPI: SSDT 3F693A23, 01D0 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 16.932694] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 16.932700] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 16.932951] ACPI: SSDT 3F693E62, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 16.933167] ACPI: SSDT 3F693BF3, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 16.933495] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 16.933500] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.288000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.292000] Time: hpet clocksource has been installed.
[ 3.292000] ACPI: Thermal Zone [THRM] (41 C)
[ 3.784000] usbcore: registered new interface driver usbfs
[ 3.784000] usbcore: registered new interface driver hub
[ 3.784000] usbcore: registered new device driver usb
[ 3.784000] USB Universal Host Controller Interface driver v3.0
[ 3.784000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[ 3.784000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.784000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.784000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.784000] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001820
[ 3.784000] usb usb1: configuration #1 chosen from 1 choice
[ 3.784000] hub 1-0:1.0: USB hub found
[ 3.784000] hub 1-0:1.0: 2 ports detected
[ 3.792000] SCSI subsystem initialized
[ 3.796000] libata version 2.21 loaded.
[ 3.848000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.888000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.888000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.888000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.888000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.888000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 3.888000] usb usb2: configuration #1 chosen from 1 choice
[ 3.888000] hub 2-0:1.0: USB hub found
[ 3.888000] hub 2-0:1.0: 2 ports detected
[ 3.992000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.992000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.992000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.992000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.992000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 3.992000] usb usb3: configuration #1 chosen from 1 choice
[ 3.992000] hub 3-0:1.0: USB hub found
[ 3.992000] hub 3-0:1.0: 2 ports detected
[ 4.000000] Clocksource tsc unstable (delta = -94556697 ns)
[ 4.096000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
[ 4.096000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 4.096000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.096000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 4.096000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
[ 4.096000] usb usb4: configuration #1 chosen from 1 choice
[ 4.096000] hub 4-0:1.0: USB hub found
[ 4.096000] hub 4-0:1.0: 2 ports detected
[ 4.200000] 8139cp 0000:0a:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 4.200000] 8139cp 0000:0a:00.0: Try the "8139too" driver instead.
[ 4.200000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[ 4.200000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.200000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.200000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.200000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.200000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.200000] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xb0004000
[ 4.204000] 8139too Fast Ethernet driver 0.9.28
[ 4.204000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.204000] usb usb5: configuration #1 chosen from 1 choice
[ 4.204000] hub 5-0:1.0: USB hub found
[ 4.204000] hub 5-0:1.0: 8 ports detected
[ 4.308000] ata_piix 0000:00:1f.1: version 2.11
[ 4.308000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 4.308000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 4.308000] scsi0 : ata_piix
[ 4.308000] scsi1 : ata_piix
[ 4.308000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
[ 4.308000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
[ 4.656000] ata1.00: ATA-6: HTS541080G9AT00, MB4OA60A, max UDMA/100
[ 4.656000] ata1.00: 156301488 sectors, multi 16: LBA48
[ 4.656000] ata1.01: ATAPI: MATSHITADVD-RAM UJ-850S, 1.50, max UDMA/33
[ 4.656000] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 4.672000] ata1.00: configured for UDMA/33
[ 4.732000] usb 5-6: new high speed USB device using ehci_hcd and address 2
[ 4.844000] ata1.01: configured for UDMA/33
[ 4.904000] usb 5-6: configuration #1 chosen from 1 choice
[ 5.008000] scsi 0:0:0:0: Direct-Access ATA HTS541080G9AT00 MB4O PQ: 0 ANSI: 5
[ 5.012000] scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.50 PQ: 0 ANSI: 5
[ 5.012000] ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 5.012000] eth0: RealTek RTL8139 at 0xf8862000, 00:16:36:60:3f:58, IRQ 16
[ 5.012000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 5.024000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.024000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.024000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.024000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.024000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.024000] sd 0:0:0:0: [sda] Write Protect is off
[ 5.024000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.024000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.024000] sda: sda1 sda2 sda3
[ 5.068000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.072000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.072000] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 5.080000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.080000] Uniform CD-ROM driver Revision: 3.20
[ 5.080000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 5.340000] Attempting manual resume
[ 5.340000] swsusp: Resume From Partition 8:3
[ 5.340000] PM: Checking swsusp image.
[ 5.340000] PM: Resume from disk failed.
[ 5.384000] kjournald starting. Commit interval 5 seconds
[ 5.384000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.452000] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 5.640000] usb 4-2: configuration #1 chosen from 1 choice
[ 11.580000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.636000] Netfilter messages via NETLINK v0.30.
[ 11.644000] nf_conntrack version 0.5.0 (8116 buckets, 64928 max)
[ 13.036000] intel_rng: FWH not detected
[ 13.052000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.056000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.080000] iTCO_vendor_support: vendor-support=0
[ 13.084000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 13.084000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 13.084000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.272000] Linux agpgart interface v0.102 (c) Dave Jones
[ 13.400000] agpgart: Detected an Intel 945GM Chipset.
[ 13.400000] agpgart: Detected 7932K stolen memory.
[ 13.420000] agpgart: AGP aperture is 256M @ 0xc0000000
[ 13.608000] sdhci: Secure Digital Host Controller Interface driver
[ 13.608000] sdhci: Copyright(c) Pierre Ossman
[ 13.608000] sdhci: SDHCI controller found at 0000:0a:09.3 [104c:803c] (rev 0)
[ 13.608000] ACPI: PCI Interrupt 0000:0a:09.3[A] -> GSI 20 (level, low) -> IRQ 20
[ 13.608000] mmc0: SDHCI at 0xb0300400 irq 20 DMA
[ 13.644000] ieee80211_crypt: registered algorithm 'NULL'
[ 13.672000] ACPI: PCI Interrupt 0000:0a:09.2[A] -> GSI 20 (level, low) -> IRQ 20
[ 13.696000] Yenta: CardBus bridge found at 0000:0a:09.0 [1025:0102]
[ 13.696000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 13.696000] Yenta: Routing CardBus interrupts to PCI
[ 13.696000] Yenta TI: socket 0000:0a:09.0, mfunc 0x01321b22, devctl 0x66
[ 13.716000] usbcore: registered new interface driver hiddev
[ 13.748000] input: HID 1241:1177 as /class/input/input2
[ 13.748000] input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:1d.3-2
[ 13.748000] usbcore: registered new interface driver usbhid
[ 13.748000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 13.752000] Linux video capture interface: v2.00
[ 13.784000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 13.784000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 13.824000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(VC0321)
[ 13.848000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[ 13.848000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 13.928000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[ 13.928000] Socket status: 30000006
[ 13.928000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[ 13.928000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 13.928000] cs: IO port probe 0x2000-0x2fff: clean.
[ 13.928000] pcmcia: parent PCI bridge Memory window: 0xb0300000 - 0xb03fffff
[ 13.928000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 13.936000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[ 13.936000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 13.936000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 13.936000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 14.044000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 14.064000] usbcore: registered new interface driver gspca
[ 14.064000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 14.072000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 14.072000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 14.084000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 14.272000] cs: IO port probe 0x100-0x3af: clean.
[ 14.272000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 14.272000] cs: IO port probe 0x820-0x8ff: clean.
[ 14.276000] cs: IO port probe 0xc00-0xcf7: clean.
[ 14.276000] cs: IO port probe 0xa00-0xaff: clean.
[ 14.664000] loop: module loaded
[ 14.696000] lp: driver loaded but no devices found
[ 14.796000] Adding 1309288k swap on /dev/sda3. Priority:-1 extents:1 across:1309288k
[ 15.312000] EXT3 FS on sda1, internal journal
[ 15.836000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
[ 16.064000] kjournald starting. Commit interval 5 seconds
[ 16.064000] EXT3 FS on sda2, internal journal
[ 16.064000] EXT3-fs: mounted filesystem with ordered data mode.