sat_newbie

Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 2) at 0000:02:06.0, irq: 3, latency: 32, mmio: 0xdd000000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
msp3400 2-0040: chip=MSP3430G-A4 +nicam +simple +simpler +radio mode=simpler
tuner 2-0061: chip found @ 0xc2 (bt878 #0 [sw])
tveeprom 2-0050: Hauppauge model 61111, rev B126, serial# 1912481
tveeprom 2-0050: tuner model is Temic 4036FY5 (idx 26, type 8)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is MSP3430 (idx 7)
tveeprom 2-0050: has no radio
bttv0: using tuner=8
tuner 2-0061: type set to 8 (Temic NTSC (4036 FY5))
bttv0: i2c: checking for MSP34xx @ 0x80... found
msp3400 2-0040: msp34xxg daemon started
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 . ok
bttv: Bt8xx card found (1).
bttv1: Bt878 (rev 17) at 0000:02:07.0, irq: 161, latency: 32, mmio: 0xdd002000
bttv1: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001
bttv1: using: Twinhan DST + clones [card=113,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=00f5ffff [init]
bttv1: using tuner=4
bttv1: add subdevice "dvb1"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878(0): Bt878 (rev 2) at 02:06.1, irq: 3, latency: 32, memory: 0xdd001000
bt878: Bt878 AUDIO function found (1).
bt878(1): Bt878 (rev 17) at 02:07.1, irq: 161, latency: 32, memory: 0xdd003000
DVB: registering new adapter (bttv1).
rdc_8820_reset: Resetting DST
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000]
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004]
dst_comm_init: Initializing DST.
dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
rdc_reset_state: Resetting state machine
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0000]
dst_gpio_outb: mask=[0002], enbb=[0002], outhigh=[0002]
writing [ 00 06 00 00 00 00 00 fa ]
write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00)
dst_error_recovery: Trying to return from previous errors.
dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
write_dst: _write_dst error (err == -5, len == 0x08, b0 == 0x00)
dst_error_recovery: Trying to return from previous errors.
dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
dst_gpio_outb: mask=[ffffffff], enbb=[0001], outhigh=[0000]
write_dst: RDC 8820 RESET
dst_error_bailout: Trying to bailout from previous error.
rdc_8820_reset: Resetting DST
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0000]
dst_gpio_outb: mask=[0004], enbb=[0004], outhigh=[0004]
dst_gpio_outb: mask=[ffffffff], enbb=[0000], outhigh=[0000]
dst_probe: unknown device.
frontend_init: Could not find a Twinhan DST.
dvb-bt8xx: A frontend driver was not found for device 109e/0878 subsystem 1822/0001