rendered paste body#! /bin/sh
# install.sh
# Copyright (c) 1999, by Powerware (R) Corporation. All rights reserved.
# A shell script which installs LanSafe for Unix
# It extracts the data from the media and copies it to /usr/ls3,
# edits /etc/services, /etc/inittab and a few other things.
# At the end it runs install.ls
:
PATH=$PATH:/bin:/usr/bin:/usr/ucb:.; export PATH
initDefines() {
DGUX_SYS_ERROR=1
ERR_UNKNOWN_SYS_STR1=2
ERR_UNKNOWN_SYS_STR2=3
ERR_UNKNOWN_SYS_STR3=4
ERR_CHECK_FATAL_OVERRIDE=5
ERR_CHECK_FATAL_EXIT=6
ERR_CHECK_STATUS=7
INSTALL_FROM=8
INSTALL_TO=9
INSTALLED_STR=10
INSTALLED_DONE=11
GET_DEVICE_NAME=12
INSTALL_DEVICE=13
ERR_INVALID_DIR=14
ERR_INVALID_DEVICE_STR1=15
ERR_INVALID_DEVICE_STR2=16
OK_STR=17
ERR_NO_DEVICE=18
EXTRACTING_FILE=19
ERR_EXTRACTING_FILE=20
UPS_DRIVER_STR1=21
UPS_DRIVER_STR2=22
UPS_DRIVER_STR3=23
UW2_UPS_DRIVER_STR1=24
UW2_UPS_DRIVER_STR2=25
UW2_UPS_DRIVER_STR3=26
UW2_UPS_DRIVER_STR4=27
UW2_UPS_DRIVER_STR5=28
UW2_UPS_DRIVER_STR6=29
UW2_UPS_DRIVER_STR7=30
UW2_UPS_DRIVER_STR8=31
IA_UPS_DRIVER_STR1=32
IA_UPS_DRIVER_STR2=33
IA_UPS_DRIVER_STR3=34
IA_UPS_DRIVER_STR4=35
IA_UPS_DRIVER_STR5=36
IA_UPS_DRIVER_STR6=37
IA_UPS_DRIVER_STR7=38
IA_UPS_DRIVER_STR8=39
GENERAL_UPS_DRIVER_STR1=40
GENERAL_UPS_DRIVER_STR2=41
GENERAL_UPS_DRIVER_STR3=42
ASK_INSTALL_DEVICE_DRV=43
NO_INSTALL_DRV_STR1=44
NO_INSTALL_DRV_STR2=45
NO_INSTALL_DRV_STR3=46
ERR_SERVICES_FILE_STR1=47
ERR_SERVICES_FILE_STR2=48
ERR_SERVICES_FILE_STR3=49
ADDING_LS_SERVICE=50
MODIFIED_SERVICES=51
REMOVE_SERVICE_STR=52
ADD_SERVICE_STR=53
PM_DESCRIPTION=54
REMOVED_STR=55
COPY_INIT_FILE=56
INSTALLING_INIT_FILE=57
INSTALLED_STR=58
DELETING_FILE_STR=59
LINK_FILE_STR=60
LINKED_STR=61
WELCOME_STR1=62
WELCOME_STR2=63
WELCOME_STR3=64
CONTINUE_INSTALLATION=65
INSTALL_INTRO_STR1=66
INSTALL_INTRO_STR2=67
INSTALL_INTRO_STR3=68
INSTALL_INTRO_STR4=69
INSTALL_INTRO_STR5=70
INSTALL_INTRO_STR6=71
INSTALL_INTRO_STR7=72
INSTALL_INTRO_STR8=73
AGENT_INSTALL_INTRO_STR1=74
AGENT_INSTALL_INTRO_STR2=75
AGENT_INSTALL_INTRO_STR3=76
AGENT_INSTALL_INTRO_STR4=77
AGENT_INSTALL_INTRO_STR5=78
AGENT_INSTALL_INTRO_STR6=79
AGENT_INSTALL_INTRO_STR7=80
ERR_UNKNOWN_SYSTEM=81
SVR4_AGENT_INSTALL_STR1=82
SVR4_AGENT_INSTALL_STR2=83
INSTALL_SOURCE_CDROM=84
INSTALL_SOURCE_TARFILE=85
DEFAULT_PATH_STR=86
ASK_CHANGE_INSTALL_PATH=87
ENTER_INSTALL_PATH=88
NEW_PATH=89
ERR_INSTALL_PATH=90
ERR_AGENT_INSTALL_PATH_STR1=91
ERR_AGENT_INSTALL_PATH_STR2=92
AUTO_START_STR1=93
AUTO_START_STR2=94
AUTO_START_STR3=95
AUTO_START_STR4=96
AUTO_START_STR5=97
AUTO_START_STR6=98
CONFIRM_INSTALL_PARAMS_STR1=99
CONFIRM_INSTALL_PARAMS_STR2=100
CONFIRM_INSTALL_PARAMS_STR3=101
CONFIRM_INSTALL_PARAMS_STR4=102
CONFIRM_INSTALL_PARAMS_STR5=103
LICENSE_AGREEMENT=104
ERR_LIC_AGREE=105
ERR_AUTO_LOAD_STR1=106
ERR_AUTO_LOAD_STR2=107
ERR_AUTO_LOAD_STR3=108
CONFIRM_OK=109
ERR_UW2_DRY_CONTACT_UPS=110
EXTRACT_AGENT_WAIT=111
ERR_EXTRACT_AGENT=112
ERR_LINK_HPUX_STR1=113
ERR_LINK_HPUX_STR2=114
ERR_LINK_HPUX_STR3=115
ERR_LINK_HPUX_STR4=116
ERR_LINK_HPUX_STR5=117
PRESS_CONTINUE=118
ERR_LINK_SUNOS_STR1=119
ERR_LINK_SUNOS_STR2=120
ERR_LINK_SUNOS_STR3=121
ERR_LINK_SUNOS_STR4=122
ERR_LINK_SUNOS_STR5=123
ERR_LINK_SUNOS_STR6=124
ERR_LINK_SUNOS_STR7=125
ERR_LINK_SUNOS_STR8=126
SUCCESS_INSTALLED_LS=127
REGISTRATION_STR1=128
REGISTRATION_STR2=129
WARN_WEB_BROWSER=130
UNSUCCESS_INSTALLED_LS=131
ERR_UNKNOWN_SYS_STR4=132
REFRESH_SNMP=133
MIB_MODIFY_STR1=134
MIB_MODIFY_STR2=135
ERR_HPUX_PATCH=136
HPUX_EXT_AGENT_GOOD=137
ERR_NORUN_HPUX_EXT_AGENT_STR1=138
ERR_NORUN_HPUX_EXT_AGENT_STR2=139
ERR_NORUN_HPUX_EXT_AGENT_STR3=140
ERR_NORUN_HPUX_EXT_AGENT_STR4=141
ERR_NO_EXIST_HPUX_EXT_AGENT_STR1=142
ERR_NO_EXIST_HPUX_EXT_AGENT_STR2=143
ERR_NO_EXIST_HPUX_EXT_AGENT_STR3=144
ERR_NO_EXIST_HPUX_EXT_AGENT_STR4=145
WARN_HPUX_MODIFY_EXTFILE_STR1=146
WARN_HPUX_MODIFY_EXTFILE_STR2=147
ERR_HPUX_TRAP_STR1=148
ERR_HPUX_TRAP_STR2=149
SOL_EXT_AGENT_GOOD=150
ERR_NORUN_SOL_EXT_AGENT_STR1=151
ERR_NORUN_SOL_EXT_AGENT_STR2=152
ERR_NORUN_SOL_EXT_AGENT_STR3=153
ERR_NORUN_SOL_EXT_AGENT_STR4=154
ERR_NO_EXIST_SOL_EXT_AGENT_STR1=155
ERR_NO_EXIST_SOL_EXT_AGENT_STR2=156
ERR_NO_EXIST_SOL_EXT_AGENT_STR3=157
ERR_NO_EXIST_SOL_EXT_AGENT_STR4=158
ERR_SOL_SNMP_TRAP_STR1=159
ERR_SOL_SNMP_TRAP_STR2=160
ERR_SOL_SNMP_TRAP_STR3=161
ERR_SOL_SNMP_TRAP_STR4=162
ERR_SOL_SNMP_TRAP_STR5=163
PM_RUNNING=164
WARN_PM_NOT_RUN_STR1=165
WARN_PM_NOT_RUN_STR2=166
WARN_PM_NOT_RUN_STR3=167
WARN_PM_NOT_RUN_STR4=168
WARN_PM_NOT_RUN_STR5=169
AUTO_START_AGENT_STR1=170
AUTO_START_AGENT_STR2=171
AUTO_START_AGENT_STR3=172
AGENT_PARAMS_TO_STR1=173
AGENT_PARAMS_TO_STR2=174
AGENT_PARAMS_TO_STR3=175
AGENT_PARAMS_TO_STR4=176
AGENT_CUSTOM_PATH_STR1=177
AGENT_CUSTOM_PATH_STR2=178
ERR_NO_PM_EXE=179
ERR_ABS_PATH=180
ERR_AGENT_SYS_STR1=181
ERR_AGENT_SYS_STR2=182
ERR_NOT_DEVICE_NAME=183
ERR_NO_DIR=184
AGENT_WELCOME_STR1=185
AGENT_WELCOME_STR2=186
AGENT_WELCOME_STR3=187
AGENT_WELCOME_STR4=188
AGENT_WELCOME_STR5=189
AGENT_WELCOME_STR6=190
AGENT_WELCOME_STR7=191
AGENT_WELCOME_STR8=192
SNMP_DEAMON_RUNNING=193
ERR_SNMP_DEAMON_NOT_RUN_STR1=194
ERR_SNMP_DEAMON_NOT_RUN_STR2=195
ERR_SNMP_DEAMON_NOT_RUN_STR3=196
ERR_SNMP_DEAMON_NOT_RUN_STR4=197
ERR_SNMP_DEAMON_NOT_RUN_STR5=198
AGENT_SAME_DIR_STR1=199
AGENT_SAME_DIR_STR2=200
AGENT_FOUND_DEF_PATH_STR1=201
AGENT_FOUND_DEF_PATH_STR2=202
WARN_NO_DEF_PATH_STR1=203
WARN_NO_DEF_PATH_STR2=204
AGENT_CUSTOM_PATH=205
AGENT_SUCCESS_INSTALLED=206
ERR_INVALID_ARGUMENTS=207
AGENT_USAGE_STR=208
USAGE_STR=209
REGISTER_WEBSITE=210
ERR_INSTALL_ROOT_PATH=211
LS_VERSION=212
}
compute_files () {
cat <<EOF
PowerMonitor.email
PowerMonitor.broadcast
PowerMonitor.shutdown
PowerMonitor.unload
PowerMonitor.sh
upslist.ups
PowerMonitorEvents.def
install.ls
install.txt
PowerMonitorC
PowerMonitorM
PowerMonitorX
PowerMonitorIcon
uninstall.sh
OEMModel.ini
license.txt
EOF
#if [ $system = "sco" ]; then
# cat <<EOF
#s1.objscr
#picture.px
#Ls3.node
#EOF
#fi
#if [ $system = "sunos" ]; then
# cat <<EOF
#XKeysymDB
#chk4patch.sh
#EOF
#fi
#if [ "$system" = "linux" ]; then
# cat <<EOF
#ls3conX.sco
#README.TXT
#EOF
#fi
}
Convert_Case () {
if [ -n "$uppercase_mount" ]; then
echo `Convert_UpperCase $1`
else
echo `Convert_LowerCase $1`
fi
}
Convert_UpperCase () {
case $1 in
PowerMonitor.email)
echo POWERMONITOR.EMAIL
;;
PowerMonitor.broadcast)
echo POWERMONITOR.BROADCAST
;;
PowerMonitor.shutdown)
echo POWERMONITOR.SHUTDOWN
;;
PowerMonitor.unload)
echo POWERMONITOR.UNLOAD
;;
PowerMonitor.sh)
echo POWERMONITOR.SH
;;
# ls3icon)
# echo LS3ICON
# ;;
# ls3conX.ico)
# echo LS3CONX.ICO
# ;;
hoh.hlp)
echo HOH.HLP
;;
# ls3conX.hlp)
# echo LS3CONX.HLP
# ;;
PowerMonitor.hlp)
echo POWERMONITOR.HLP
;;
manualu.hlp)
echo MANUALU.HLP
;;
manualu.rtf)
echo MANUALU.RTF
;;
# install.mfg)
# echo INSTALL.MFG
# ;;
# install.ups)
# echo INSTALL.UPS
# ;;
upslist.ups)
echo UPSLIST.UPS
;;
PowerMonitorEvents.def)
echo POWERMONITOREVENTS.DEF
;;
install.ls)
echo INSTALL.LS
;;
install.txt)
echo INSTALL.TXT
;;
PowerMonitorC)
echo POWERMONITORC
;;
PowerMonitorM)
echo POWERMONITORM
;;
PowerMonitorX)
echo POWERMONITORX
;;
PowerMonitorIcon)
echo POWERMONITORICON
;;
PowerMonitorHelp)
echo POWERMONITORHELP
;;
PowerMonitorRetainLog.cfg)
echo POWERMONITORRETAINLOG.CFG
;;
uninstall.sh)
echo UNINSTALL.SH
;;
OEMModel.ini)
echo OEMMODEL.INI
;;
license.txt)
echo LICENSE.TXT
;;
# s1.objscr)
# echo S1.OBJ
# ;;
# picture.px)
# echo PICTURE.PX
# ;;
# Ls3.node)
# echo LS3.NOD
# ;;
# XKeysymDB)
# echo XKEYSYMD
# ;;
# chk4patch.sh)
# echo CHK4PATC.SH
# ;;
# ls3conX.sco)
# echo LS3CONX.SCO
# ;;
# readme.txt|README.TXT)
# echo README.TXT
# ;;
*)
echo UNKNOWN
;;
esac
}
Convert_LowerCase () {
case $1 in
PowerMonitor.email)
echo powermonitor.email
;;
PowerMonitor.broadcast)
echo powermonitor.broadcast
;;
PowerMonitor.shutdown)
echo powermonitor.shutdown
;;
PowerMonitor.unload)
echo powermonitor.unload
;;
PowerMonitor.sh)
echo powermonitor.sh
;;
# ls3icon)
# echo ls3icon
# ;;
# ls3conX.ico)
# echo ls3conx.ico
# ;;
hoh.hlp)
echo hoh.hlp
;;
# ls3conX.hlp)
# echo ls3conx.hlp
# ;;
PowerMonitor.hlp)
echo powermonitor.hlp
;;
manualu.hlp)
echo manualu.hlp
;;
manualu.rtf)
echo manualu.rtf
;;
# install.mfg)
# echo install.mfg
# ;;
install.ups)
echo install.ups
;;
upslist.ups)
echo upslist.ups
;;
PowerMonitorEvents.def)
echo powermonitorevents.def
;;
install.ls)
echo install.ls
;;
install.txt)
echo install.txt
;;
PowerMonitorC)
echo powermonitorc
;;
PowerMonitorM)
echo powermonitorm
;;
PowerMonitorX)
echo powermonitorx
;;
PowerMonitorIcon)
echo powermonitoricon
;;
PowerMonitorHelp)
echo powermonitorhelp
;;
PowerMonitorRetainLog.cfg)
echo powermonitorretainlog.cfg
;;
uninstall.sh)
echo uninstall.sh
;;
OEMModel.ini)
echo oemmodel.ini
;;
license.txt)
echo license.txt
;;
# s1.objscr)
# echo s1.obj
# ;;
# picture.px)
# echo picture.px
# ;;
# Ls3.node)
# echo ls3.nod
# ;;
# XKeysymDB)
# echo xkeysymd
# ;;
# chk4patch.sh)
# echo chk4patch.sh
# ;;
# ls3conX.sco)
# echo ls3conx.sco
# ;;
# readme.txt|README.TXT)
# echo readme.txt
# ;;
*)
echo UNKNOWN
;;
esac
}
get_parameters() {
case $1 in
English)
lang=EN
;;
Japanese)
lang=JP
;;
*.tar)
tardev=$1
;;
Linux)
SYSTEM=LINUX
;;
Linux_EL4)
SYSTEM=LINUX_EL4
;;
Linux_EL4_AMD64)
SYSTEM=LINUX_EL4_AMD64
;;
Linux_EL4_IA64)
SYSTEM=LINUX_EL4_IA64
;;
P5Linux_EL4)
SYSTEM=P5LINUX_EL4
;;
P5Linux)
SYSTEM=P5LINUX
;;
HPUX)
SYSTEM=$1
;;
IRIX)
SYSTEM=$1
;;
AIX4)
SYSTEM=$1
;;
AIX5)
SYSTEM=AIX4
;;
Darwin)
SYSTEM=MACOSX
;;
esac
}
check_locale_language() {
if [ "$system" = macosx -o "$SYSTEM" = MACOSX ]; then
echo
else
set `locale` >/dev/null 2>&1
case $1 in
LANG=en_US)
lang=EN
;;
LANG=C)
lang=EN
;;
esac
fi
}
compute_echo () {
if [ `echo "\c" | wc -l` = 1 ]; then
echo true
else
echo ""
fi
}
compute_sco_system () {
set `uname -a`
case $1 in
SCO_SV)
echo sco5
;;
*)
echo sco3
;;
esac
}
fixup_linux_system () {
stty ocrnl onocr onlret echonl inlcr echok echoe erase 0x7f
if [ -d /usr/lib/terminfo ]; then
ln -s /usr/lib/terminfo /usr/share/terminfo >/dev/null 2>&1
elif [ -d /usr/share/terminfo ]; then
ln -s /usr/share/terminfo /usr/lib/terminfo >/dev/null 2>&1
else
echo "No terminfo files in either /usr/share/ or /usr/lib/"
fi
}
compute_dgux_system () {
set `uname -a`
case $3 in
R4.20|R4.1*|R4.0*)
lineStr=`head -$DGUX_SYS_ERROR $INSTALLRES |tail -1`
# echo "You need to have at least DG/UX release 4.20MU01. Can't continue LanSafe installation."
echo $lineStr
exit 1
;;
*)
;;
esac
}
compute_SYSTEM () {
set `uname -a`
case $1 in
IRIX|IRIX64)
SYSTEM=IRIX
;;
Linux)
# SYSTEM=LINUX
# case $3 in
# 2.6.*EL*)
# set `uname -m`
# case $1 in
# *64*)
# SYSTEM=LINUX
# ;;
# *)
# SYSTEM=LINUX_EL4
# ;;
# esac
# ;;
# *)
# SYSTEM=LINUX
# ;;
# esac
# ;;
#64 bit linux installation
SYSTEM=LINUX
set `uname -m`
case $1 in
ppc*)
set `/lib/libc.so.6*`
case $7 in
2.3.0*)
SYSTEM=P5LINUX_EL4
;;
2.3.1*)
SYSTEM=P5LINUX_EL4
;;
2.3.2*)
SYSTEM=P5LINUX_EL4
;;
2.3.3*)
SYSTEM=P5LINUX_EL4
;;
2.3.5*)
SYSTEM=P5LINUX_EL4
;;
2.3.4*)
SYSTEM=P5LINUX_EL4
;;
2.4.*)
SYSTEM=P5LINUX_EL4
;;
2.4*)
SYSTEM=P5LINUX_EL4
;;
2.5*)
SYSTEM=P5LINUX_EL4
;;
esac
;;
ia64)
set `/lib/libc.so.6*`
case $7 in
2.3.0*)
SYSTEM=LINUX_EL4_IA64
;;
2.3.1*)
SYSTEM=LINUX_EL4_IA64
;;
2.3.2*)
SYSTEM=LINUX_EL4_IA64
;;
2.3.3*)
SYSTEM=LINUX_EL4_IA64
;;
2.3.4*)
SYSTEM=LINUX_EL4_IA64
;;
2.3.5*)
SYSTEM=LINUX_EL4_IA64
;;
2.4*)
SYSTEM=LINUX_EL4_IA64
;;
2.5*)
SYSTEM=LINUX_EL4_IA64
;;
*)
SYSTEM=LINUX
;;
esac
;;
x86_64)
set `/lib/libc.so.6*`
case $7 in
2.3.0*)
SYSTEM=LINUX_EL4_AMD64
;;
2.3.1*)
SYSTEM=LINUX_EL4_AMD64
;;
2.3.2*)
SYSTEM=LINUX_EL4_AMD64
;;
2.3.3*)
SYSTEM=LINUX_EL4_AMD64
;;
2.3.4*)
SYSTEM=LINUX_EL4_AMD64
;;
2.3.5*)
SYSTEM=LINUX_EL4_AMD64
;;
2.4*)
SYSTEM=LINUX_EL4_AMD64
;;
2.5*)
SYSTEM=LINUX_EL4_AMD64
;;
*)
SYSTEM=LINUX
;;
esac
;;
*)
set `/lib/libc.so.6*`
case $7 in
2.3.0*)
SYSTEM=LINUX
;;
2.3.1*)
SYSTEM=LINUX
;;
2.3.2*)
SYSTEM=LINUX
;;
2.3.3*)
SYSTEM=LINUX
;;
2.3.4*)
SYSTEM=LINUX_EL4
;;
2.3.5*)
SYSTEM=LINUX_EL4
;;
2.4.*)
SYSTEM=LINUX_EL4
;;
2.4*)
SYSTEM=LINUX_EL4
;;
2.5*)
SYSTEM=LINUX_EL4
;;
esac
;;
esac
;;
SunOS)
case $3 in
5.*)
case $5 in
i86pc)
SYSTEM=SOLINT
;;
*)
SYSTEM=SOLARI
;;
esac
;;
*)
SYSTEM=SUNOS
;;
esac
;;
HP-UX)
SYSTEM=HPUX
;;
OSF1)
SYSTEM=DEC
;;
dgux)
SYSTEM=DGUX
;;
SCO_SV)
SYSTEM=SCO
;;
UnixWare)
SYSTEM=UW2
;;
Darwin)
SYSTEM=MACOSX
;;
UNIX_SV)
if [ -f /etc/issue ]; then
grep "UnixWare" /etc/issue >/dev/null 2>/dev/null
if [ $? != 1 ]; then
SYSTEM=UW2
else
SYSTEM=SVR4
fi
else
SYSTEM=SVR4
fi
;;
AIX)
case $4 in
3)
SYSTEM=AIX3
;;
4)
SYSTEM=AIX4
;;
5)
SYSTEM=AIX4
;;
esac
;;
*)
if [ -c /dev/tty1A ]; then
SYSTEM=SCO
elif [ -c /dev/ttyd0 -a "$1" != "Linux" ]; then
SYSTEM=IA
elif [ -c /dev/ttypa -a "$1" != "Linux" ]; then
SYSTEM=IA
else
SYSTEM="Unknown System"
fi
;;
esac
}
compute_system () {
case $SYSTEM in
IRIX|IRIX64)
system=irix
;;
LINUX)
system=linux
;;
LINUX_EL4)
system=linux_el4
;;
LINUX_EL4_AMD64)
system=linux_el4_amd64
;;
LINUX_EL4_IA64)
system=linux_el4_ia64
;;
P5LINUX_EL4)
system=P5linux_el4
;;
P5LINUX)
system=P5linux
;;
SOLINT)
system=solint
;;
SOLARI)
system=solari
;;
# SUNOS)
# system=sunos
# ;;
HPUX)
system=hpux
;;
MACOSX)
system=macosx
;;
# DEC)
# system=dec
# ;;
# DGUX)
# system=dgux
# ;;
SCO)
system=sco
;;
# UW2)
# system=uw2
# ;;
# SVR4)
# system=svr4
# ;;
AIX3)
system=aix3
;;
# From LanSafe v5.0.0.0, $system is set to aix for both AIX4 and AIX5.
AIX4)
system=aix
;;
AIX5)
system=aix
;;
# IA)
# system=ia
# ;;
# "Unknown System")
# system="Unknown System"
# ;;
*)
echo
# echo Unknown System \"$SYSTEM\". LanSafe installation can not continue.
# echo Please specify your system like, "\"./install.sh <SYSTEM>\""
lineStr=`head -$ERR_UNKNOWN_SYS_STR1 $INSTALLRES |tail -1`
lineStr1=`head -$ERR_UNKNOWN_SYS_STR4 $INSTALLRES |tail -1`
echo "$lineStr \"$SYSTEM\". $lineStr1"
lineStr=`head -$ERR_UNKNOWN_SYS_STR2 $INSTALLRES |tail -1`
echo $lineStr
# echo Valid systems are LINUX SOLINT SOLARI SUNOS HPUX DEC DGUX SCO UW2 SVR4 AIX3 AIX4 AIX5 IA
# echo Valid systems are LINUX
lineStr=`head -$ERR_UNKNOWN_SYS_STR3 $INSTALLRES |tail -1`
echo $lineStr
echo
exit
;;
esac
}
compute_disks () {
case $system in
irix|irix64)
echo 1 2
;;
linux|linux_el4|P5linux|P5linux_el4|linux_el4_amd64|linux_el4_ia64)
# echo 1 2 3 4 5
echo 1 2
;;
sco|dgux)
# echo 1 2 3 4
echo 1 2
;;
ia)
# echo 1 2 3
echo 1 2
;;
sunos)
# echo 1 2 3 4
echo 1 2
;;
hpux)
# echo 1 2 3
echo 1 2
;;
solari)
# echo 1 2 3 4
echo 1 2
;;
solint)
# echo 1 2 3
echo 1 2
;;
dec)
# echo 1 2 3 4
echo 1 2
;;
uw2)
echo 1 2
;;
macosx)
echo 1 2
;;
aix3)
echo 1 2
;;
# aix4)
# echo 1 2
# ;;
# From LanSafe v 5.0.0.0, $system for aix4 and aix5 will be set to aix RF 05/07/03
aix)
echo 1 2
;;
svr4)
# echo 1 2 3
echo 1 2
;;
esac
}
compute_tapedirs () {
for disk in `compute_disks`; do
case $disk in
1)
if [ -n "$cdrom_install" ]; then
if [ -n "$uppercase_mount" ]; then
echo_n 1_INSTALL " "
else
echo_n 1_install " "
fi
else
echo_n 1_install " "
fi
;;
*)
if [ -n "$uppercase_mount" ]; then
echo_n ${disk}_${SYSTEM}_$lang " "
else
echo_n ${disk}_${system}_$lang " "
fi
;;
esac
done
echo
}
compute_topath () {
case $1 in
*.afm|typeface.map)
echo /usr/lib/Xp/FontMetrics/AFM
;;
*.fonts)
echo /usr/lib/Xp
;;
hoh.hlp)
echo /usr/lib/hyperhelp
;;
HyperHelp)
echo /usr/lib/X11/app-defaults
;;
picture.px| s1.objscr)
echo /usr/lib/X11/XDesktop3/applications/Ls3.obj
;;
Ls3.node)
echo /etc/conf/node.d
;;
XKeysymDB)
echo /usr/lib/X11
;;
*.bmp)
echo $instpath/bitmaps
;;
*.cfg)
echo $instpath/Config
;;
*.mfg)
echo $instpath/Config
;;
*.ups)
echo $instpath/Config
;;
*.def)
echo $instpath/Config
;;
*.hlp)
echo $instpath/Help
;;
*.rtf)
echo $instpath/Help
;;
license.txt)
echo $instpath
;;
*)
echo $instpath/Bin
;;
esac
}
compute_toperm () {
case $1 in
install.ls |\
chk4patch.sh |\
PowerMonitorX |\
PowerMonitorIcon |\
ls3conX |\
PowerMonitorHelp |\
ls3con)
echo 0755
;;
Ls3s |\
PowerMonitorM |\
PowerMonitorC |\
ls.init | \
PowerMonitor.email | \
PowerMonitor.broadcast | \
PowerMonitor.shutdown | \
PowerMonitor.unload | \
PowerMonitor.sh | \
uninstall.sh)
echo 0744
;;
PowerMonitorEvents.cfg | \
PowerMonitorEvents.def)
echo 0600
;;
*)
echo 0444
;;
esac
}
compute_uncompress () {
for subdir in `compute_tapedirs`; do
if [ -f $subdir/gunzip ]; then
echo $subdir/gunzip
return
fi
done
if [ -f gunzip ]; then
echo gunzip
fi
echo uncompress
}
echo_n () {
if [ $bsdecho ]; then
echo -n "$*"
else
echo "$*\c"
fi
}
create_path() {
fullpath=""
for path in `echo $1 | sed 's/\// /g'`; do
fullpath=$fullpath/$path
if [ ! -d $fullpath ]; then
mkdir $fullpath
if [ $? != 0 ]; then
return 1
fi
chmod 755 $fullpath
#change chown to Daemon for MaxOsx (KB 11/18/03)
if [ "$system" = sunos -o "$SYSTEM" = SUNOS ]; then
/usr/etc/chown bin $fullpath
chgrp bin $fullpath
elif [ "$system" = macosx -o "$SYSTEM" = MACOSX ]; then
chown daemon $fullpath
chgrp daemon $fullpath
else
chown bin $fullpath
chgrp bin $fullpath
fi
#chgrp bin $fullpath
if [ $? != 0 ]; then
return 1
fi
fi
done
if [ -d $1 ]; then
return 0
fi
return 1
}
check_fatal () {
if [ $? != 0 ]; then
if [ $override ]; then
# echo "Install failed. Override set."
lineStr=`head -$ERR_CHECK_FATAL_OVERRIDE $INSTALLRES |tail -1`
echo $lineStr
return 0
fi
# echo "Install failed. Exiting"
lineStr=`head -$ERR_CHECK_FATAL_EXIT $INSTALLRES |tail -1`
echo $lineStr
exit 1
fi
}
check_status () {
if [ $? != 0 ]; then
if [ $override ]; then
# echo "Check status failed. Override set."
lineStr=`head -$ERR_CHECK_STATUS $INSTALLRES |tail -1`
echo $lineStr
return 0
fi
return 1
fi
return 0
}
untar_to () {
name=$1
dst=$2
perm=$3
prefix=.
for subdir in `compute_tapedirs`; do
if [ -f $subdir/$name ]; then
prefix=$subdir
fi
if [ -f $subdir/$name.z ]; then
prefix=$subdir
fi
if [ -f $subdir/$name.Z ]; then
prefix=$subdir
fi
done
src=$prefix/$name
create_path $dst
check_fatal
if [ ! -f $src ]; then
if [ -f $src.z ]; then
$uncompress_cmd $src.z
check_fatal
fi
if [ -f $src.Z ]; then
$uncompress_cmd $src.Z
check_fatal
fi
fi
if [ -f $dst/$name ]; then
mv -f $dst/$name $dst/$name~ > /dev/null 2>&1
fi
mv -f $src $dst >/dev/null 2>&1
if [ $? != 0 ]; then
cp $src $dst
check_fatal
rm -f $src
fi
lineStr=`head -$INSTALL_FROM $INSTALLRES |tail -1`
lineStr1=`head -$INSTALL_TO $INSTALLRES |tail -1`
lineStr2=`head -$INSTALLED_DONE $INSTALLRES |tail -1`
chmod $perm $dst/$name
# (cd $dst; tar -xvf $name |
# awk '{ print "Installing " $2 " to '$dst' ... done" }' |
# sed 's/, / /' ) 2>/dev/null
(cd $dst; tar -xvf $name |
awk '{ print "$lineStr " $2 " $lineStr1 '$dst' ... $lineStr2" }' |
sed 's/, / /' ) 2>/dev/null
check_fatal
for f in `(cd $dst; tar -tf $name 2>/dev/null)`; do
# echo "Installed: $dst/$f" >> $instpath/installed
lineStr=`head -$INSTALLED_STR $INSTALLRES |tail -1`
echo "$lineStr $dst/$f" >> $instpath/installed
chmod $perm $dst/$f
check_fatal
#changes for mac
if [ "$system" = sunos -o "$SYSTEM" = SUNOS ]; then
/usr/etc/chown bin $dst/$f
chgrp bin $dst/$f
elif [ "$system" = macosx -o "$SYSTEM" = MACOSX ]; then
chown daemon $dst/$f
chgrp daemon $dst/$f
else
chown bin $dst/$f
chgrp bin $dst/$f
fi
#chown bin $dst/$f
#chgrp bin $dst/$f
done
rm -f $dst/$name
}
install_to () {
name=$1
dst=$2
perm=$3
prefix=.
lc_name=$name
#if [ -n "$cdrom_install" ]; then
# name=`Convert_Case $name`
#fi
# echo_n "Installing $lc_name to $dst ... "
lineStr=`head -$INSTALL_FROM $INSTALLRES |tail -1`
lineStr1=`head -$INSTALL_TO $INSTALLRES |tail -1`
echo_n "$lineStr $lc_name $lineStr1 $dst ..."
for subdir in `compute_tapedirs`; do
if [ -f $subdir/$name ]; then
prefix=$subdir
fi
if [ -f $subdir/$name.z ]; then
prefix=$subdir
fi
if [ -f $subdir/$name.Z ]; then
prefix=$subdir
fi
done
src=$prefix/$name
create_path $dst
check_fatal
if [ ! -f $src ]; then
if [ -f $src.z ]; then
$uncompress_cmd $src.z
check_fatal
fi
if [ -f $src.Z ]; then
if [ -n "$cdrom_install" ]; then
cp $src.Z /tmp/$name.Z
$uncompress_cmd /tmp/$name.Z
src=/tmp/$name
else
$uncompress_cmd $src.Z
fi
check_fatal
fi
fi
rm -f $dst/$lc_name
if [ -f $dst/$lc_name ]; then
mv -f $dst/$lc_name $dst/$lc_name~ > /dev/null 2>&1
fi
if [ -n "$cdrom_install" ]; then
# echo
# echo $src
# echo $dst/$lc_name
cp $src $dst/$lc_name
check_fatal
else
mv -f $src $dst/$lc_name >/dev/null 2>&1
if [ $? != "0" ]; then
cp $src $dst/$lc_name
check_fatal
rm -f $src
fi
fi
chmod $perm $dst/$lc_name
check_fatal
#Change chown because there is no bin on MacOSx (KB 11/18/03)
if [ "$system" = sunos -o "$SYSTEM" = SUNOS ]; then
/usr/etc/chown bin $dst/$lc_name
chgrp bin $dst/$lc_name
elif [ "$system" = macosx -o "$SYSTEM" = MACOSX ]; then
chown daemon $dst/$lc_name
chgrp daemon $dst/$lc_name
else
chown bin $dst/$lc_name
chgrp bin $dst/$lc_name
fi
# chgrp bin $dst/$lc_name
# echo "Installed: $dst/$lc_name" >> $instpath/installed
lineStr=`head -$INSTALLED_STR $INSTALLRES |tail -1`
echo "$lineStr $dst/$lc_name" >> $instpath/installed
lineStr=`head -$INSTALLED_DONE $INSTALLRES |tail -1`
echo $lineStr
# echo "done"
}
read_one () {
prompt=$1
default=$2
echo_n "$prompt"
stty -icanon min 1
answer=`/bin/dd count=1 2>/dev/null`
stty icanon
echo
}
read_def () {
prompt=$1
default=$2
echo_n "$prompt"
read answer
if [ -z "$answer" ]; then
answer=$default
fi
}
install_files () {
echo
rm -f $instpath/installed
uncompress_cmd=`compute_uncompress`
for f in `compute_files`; do
if [ ! -z "$skip_install" ]; then
break
fi
topath=`compute_topath $f`
toperm=`compute_toperm $f`
case $f in
*.tar)
untar_to $f $topath $toperm
tar -xvf $tardev $systemdir/license.txt >/dev/null 2>&1
;;
ls3.load)
install_to $f $topath $toperm
mv -f $topath/$f $topath/$$
sed '
/\/usr\/Powerware\/LanSafe\/Bin/c\
instpath='$topath'
' $topath/$$ > $topath/$f
rm -f $topath/$$
chmod $toperm $topath/$f
check_fatal
;;
*)
install_to $f $topath $toperm
;;
esac
done
# cp $instpath/Config/install.mfg $instpath/Config/PowerMonitorX.mfg
# cp $instpath/Config/install.mfg $instpath/Config/ls3conX.mfg
# cp $instpath/Config/install.mfg $instpath/Config/ls3con.mfg
cp $instpath/Config/PowerMonitorEvents.def $instpath/Config/PowerMonitorEvents.cfg
}
# Set up check condition for tar file install.
get_tardev() {
tar_install=true
}
# No longer in use. Tar file name is provided as input argument.
ls3_get_tardev () {
tardev=""
while [ -z "$tardev" ]; do
echo
# echo "Please enter the name of the device (or tarfile) to install from."
lineStr=`head -$GET_DEVICE_NAME $INSTALLRES |tail -1`
echo $lineStr
# read_def " File name: "
lineStr=`head -$INSTALL_DEVICE $INSTALLRES |tail -1`
read_def " $lineStr "
if [ -z "$answer" ]; then
continue
fi
if [ '(' -c "$answer" ')' -o '(' -b "$answer" ')' ]; then
tardev=$answer
elif [ -d $answer ]; then
# echo "'$answer' is a invalid because it is a directory?"
lineStr=`head -$ERR_INVALID_DIR $INSTALLRES |tail -1`
echo "'$answer' $lineStr"
# elif [ -f $answer ]; then
## echo "Expecting a device name, but '$answer' is a file?"
# lineStr=`head -$ERR_INVALID_DEVICE_STR1 $INSTALLRES |tail -1`
# lineStr1=`head -$ERR_INVALID_DEVICE_STR2 $INSTALLRES |tail -1`
# echo "$lineStr '$answer' $lineStr1"
# tardev=$answer
## read_def " Is this okay? (y/n) [n] " "n"
# lineStr=`head -$OK_STR $INSTALLRES |tail -1`
# read_def " $lineStr (y/n) [n] " "n"
# case $answer in
# [yY]|[yY][eE][sS])
# tar_install=true
# ;;
# *)
# tardev=""
# ;;
# esac
# else
elif [ ! -f $answer ]; then
# echo "'$answer' does not exist or is not a device?"
lineStr=`head -$ERR_NO_DEVICE $INSTALLRES |tail -1`
echo "'$answer' $lineStr"
if [ $override ]; then
# Do not translate the following lines.
# It is only for developer and it is not using now. RF 6/19/03
echo "Override set, using '$answer'."
tardev=$answer
else
continue
fi
fi
done
}
maybe_eject () {
case $system in
sunos| solari | solint)
echo "Ejecting disk ..."
eject $tardev > /dev/null 2>&1
;;
esac
}
extract_files () {
firsttime=true
while [ -z "$tardev" -o ! -z "$firsttime" ]; do
# Prompt for different device name only if extract below fails i.e firsttime=""
if [ -z "$firsttime" ]; then
get_tardev
fi
firsttime=""
case $tardev in
*f0*|*f1*|*fd*|*floppy*|*dsk*)
media=disk
# For each disk
for disk in `compute_disks`; do
if [ $disk != "1" ]; then
maybe_eject
if [ "$system" = "ia" ]; then
LongName="Interactive"
else
LongName="$system"
fi
echo
# Do not translate the following lines.
# We no longer using floppy disks. RF 6/19/03
echo_n ">>>Insert $LongName disk #"$disk "... press Enter when ready. "
read x
fi
echo ">>>Extracting files ..."
if [ $disk != 1 ]; then
tar -xf $tardev ${disk}_${system}_$lang > /dev/null 2>&1
else
tar -xf $tardev 1_install > /dev/null 2>&1
fi
check_status
if [ $? != 0 ]; then
echo ">>>Error extracting files?"
tardev=
continue 2
fi
done
maybe_eject
;;
*st*|*mt*|*)
media=tape
echo
# echo "Extracting files ..."
lineStr=`head -$EXTRACTING_FILE $INSTALLRES |tail -1`
echo $lineStr
tar -xf $tardev `compute_tapedirs` > /dev/null 2>&1
check_status
if [ $? != 0 ]; then
# echo "Error extracting files?"
lineStr=`head -$ERR_EXTRACTING_FILE $INSTALLRES |tail -1`
echo $lineStr
tardev=
continue
fi
;;
esac
done
# end-of extract_files
}
install_upsdrv() {
# echo "A special Device Driver is needed to allow the LanSafe"
# echo "daemon to communicate with your model"
# echo "This device driver will be installed next."
lineStr=`head -$UPS_DRIVER_STR1 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$UPS_DRIVER_STR2 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$UPS_DRIVER_STR3 $INSTALLRES |tail -1`
echo $lineStr
echo ""
if [ ! -d /tmp/ups_drv ]; then
mkdir /tmp/ups_drv
fi
if [ -n "$cdrom_install" ]; then
if [ -n "$uppercase_mount" ]; then
cp $SYSTEMDIR/UPS_DRV/DRIVER.O /tmp/ups_drv/Driver.o
cp $SYSTEMDIR/UPS_DRV/FILES /tmp/ups_drv/Files
cp $SYSTEMDIR/UPS_DRV/INSTALL /tmp/ups_drv/Install
cp $SYSTEMDIR/UPS_DRV/MASTER /tmp/ups_drv/Master
cp $SYSTEMDIR/UPS_DRV/NAME /tmp/ups_drv/Name
cp $SYSTEMDIR/UPS_DRV/NODE /tmp/ups_drv/Node
cp $SYSTEMDIR/UPS_DRV/REMOVE /tmp/ups_drv/Remove
cp $SYSTEMDIR/UPS_DRV/SIZE /tmp/ups_drv/Size
cp $SYSTEMDIR/UPS_DRV/SPACE.C /tmp/ups_drv/Space.c
cp $SYSTEMDIR/UPS_DRV/SYSTEM /tmp/ups_drv/System
cp $SYSTEMDIR/UPS_DRV/MKDISK /tmp/ups_drv/mkdisk
cp $SYSTEMDIR/UPS_DRV/UPS.H /tmp/ups_drv/ups.h
if [ $SYSTEM = "SCO" ]; then
cp $SYSTEMDIR/UPS_DRV/UPS.H /tmp/ups_drv/upstmp
fi
else
cp $systemdir/ups_drv/driver.o /tmp/ups_drv/Driver.o
cp $systemdir/ups_drv/files /tmp/ups_drv/Files
cp $systemdir/ups_drv/install /tmp/ups_drv/Install
cp $systemdir/ups_drv/master /tmp/ups_drv/Master
cp $systemdir/ups_drv/name /tmp/ups_drv/Name
cp $systemdir/ups_drv/node /tmp/ups_drv/Node
cp $systemdir/ups_drv/remove /tmp/ups_drv/Remove
cp $systemdir/ups_drv/size /tmp/ups_drv/Size
cp $systemdir/ups_drv/space.c /tmp/ups_drv/Space.c
cp $systemdir/ups_drv/system /tmp/ups_drv/System
cp $systemdir/ups_drv/mkdist /tmp/ups_drv/mkdisk
cp $systemdir/ups_drv/ups.h /tmp/ups_drv/ups.h
if [ $SYSTEM = "SCO" ]; then
cp $systemdir/ups_drv/ups.h /tmp/ups_drv/upstmp
fi
fi
else
mv $systemdir/ups_drv/* /tmp/ups_drv
fi
if [ $system = "uw1" -o $system = "uw2" ]; then
# echo "LanSafe: Warning"
# echo "The asyc device driver controlling the serial port must be disabled."
# echo "Please edit the /etc/conf/cf.d/sdevice and /etc/conf/sdevice.d/asyc files to"
# echo "disable the asyc driver on the UPS port. In both files locate the line"
# echo "specifying that the asyc driver should manage that serial port and"
# echo "change the Y to an N to disable the asyc driver. To disable the ups device driver"
# echo "from a port edit the /etc/conf/cf.d/sdevice and /etc/conf/sdevice.d/ups files."
# echo "You must make these changes before installing the ups device driver."
lineStr=`head -$UW2_UPS_DRIVER_STR1 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$UW2_UPS_DRIVER_STR2 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$UW2_UPS_DRIVER_STR3 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$UW2_UPS_DRIVER_STR4 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$UW2_UPS_DRIVER_STR5 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$UW2_UPS_DRIVER_STR6 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$UW2_UPS_DRIVER_STR7 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$UW2_UPS_DRIVER_STR8 $INSTALLRES |tail -1`
echo $lineStr
fi
if [ $system = "ia" ]; then
# echo "LanSafe: Warning"
# echo "The asy device driver controlling the serial port must be disabled."
# echo "Edit the /etc/conf/cf.d/sdevice and /etc/conf/sdevice.d/asy files to"
# echo "disable the asy driver on the UPS port. In both files locate the line"
# echo "specifying that the asyc driver should manage that serial port and"
# echo "change the Y to an N to disable the asy driver. To disable the ups device driver"
# echo "from a port edit the /etc/conf/cf.d/sdevice and /etc/conf/sdevice.d/ups files."
# echo "You must make these changes before installing the ups device driver."
lineStr=`head -$IA_UPS_DRIVER_STR1 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$IA_UPS_DRIVER_STR2 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$IA_UPS_DRIVER_STR3 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$IA_UPS_DRIVER_STR4 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$IA_UPS_DRIVER_STR5 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$IA_UPS_DRIVER_STR6 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$IA_UPS_DRIVER_STR7 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$IA_UPS_DRIVER_STR8 $INSTALLRES |tail -1`
echo $lineStr
fi
echo ""
# echo "During the driver installation your kernel will be rebuilt to"
# echo "include this device driver. When the installation is completed"
# echo "you must reboot your computer to install this new kernel."
lineStr=`head -$GENERAL_UPS_DRIVER_STR1 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$GENERAL_UPS_DRIVER_STR2 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$GENERAL_UPS_DRIVER_STR3 $INSTALLRES |tail -1`
echo $lineStr
echo ""
# read_def " Install the device driver? (y/n) [y] " "y"
lineStr=`head -$ASK_INSTALL_DEVICE_DRV $INSTALLRES |tail -1`
read_def " $lineStr (y/n) [y] " "y"
case $answer in
[yY]|[yY][eE][sS])
orig_dir=$PWD
cd /tmp/ups_drv
./Install
cd $orig_dir
;;
*)
# echo "The UPS Driver MUST be built into the kernel for LanSafe to work"
# echo "The files for the driver has been copied to /tmp/ups_drv"
# echo "To install the driver into the kernel login in as root and type:"
lineStr=`head -$NO_INSTALL_DRV_STR1 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$NO_INSTALL_DRV_STR2 $INSTALLRES |tail -1`
echo $lineStr
lineStr=`head -$NO_INSTALL_DRV_STR3 $INSTALLRES |tail -1`
echo $lineStr
echo "cd /tmp/ups_drv"
echo "./Install"
;;
esac
}
kill_ls3() {
pidargs=-ax # BSD sunos
ps -ax > /dev/null 2>&1
if [ $? != "0" ]; then
pidargs=-e # svr3 svr4
fi
if [ "$system" = linux_el4 -o "$system" = P5linux -o "$system" = P5linux_el4 -o "$system" = linux -o "$system" = linux_el4_amd64 -o "$system" = linux_el4_ia64 ]; then
pidargs=ax
fi
pids=`ps $pidargs | awk '/PowerMonitor/ { print $1 }'`
kill -9 $pids > /dev/null 2>&1
}
# Not used RF 6/19/03
# Do not need to translate
install_ptf122() {
echo "A Patch is needed on UnixWare 1.1 to allow the LanSafe"
echo "daemon to communicate with the Dry Contact UPS."
echo "This patch will be installed next."
echo ""
echo ""
echo "During the patch installation your kernel will be rebuilt to"
echo "include this patch. When the installation is completed"
echo "you must reboot your computer to install a new kernel."
echo ""
mv 3_unixware/ptf122.tar /tmp/ptf122.tar
cd /tmp
tar xvf ptf122.tar
read_def " Install the patch? (y/n) [y] " "y"
case $answer in
[yY]|[yY][eE][sS])
pkgadd -d /tmp/ptf122 ptf122
;;
*)
echo "The ptf122 patch MUST be built into the kernel for LanSafe to work"
echo "The files for the driver has been copied to /tmp"
echo "To install the driver into the kernel, login as root and type:"
echo "pkgadd -d /tmp/ptf122 ptf122"
;;
esac
}
# Not used RF 6/19/03
# Do not need to translate
streamsmsg() {
echo
echo "STREAMS must be installed in the kernel."
case $system in
sco)
echo "Run 'mkdev streams' to install STREAMS into the kernel."
;;
ia)
echo "Run 'kconfig' and add the STREAMS feature to the kernel."
;;
*)
echo "Configure STREAMS into the kernel."
;;
esac
echo
}
# Not used RF 6/19/03
# Do not need to translate
chk4sp() {
CONF=/etc/conf
CONFBIN=$CONF/bin
NODEFILE=$CONF/node.d/Ls3.node
case $system in
sco)
if [ -c /dev/socksys -a -f /etc/services ]; then
return 0; # looks like they have tcp skip sp check
fi
;;
ia| uw1| uw2)
if [ -c /dev/tcp -a -c /dev/udp -a -f /etc/services ]; then
return 0; # looks like they have tcp skip sp check
fi
;;
*)
return 0; # non error
;;
esac
# must have clone
$CONFBIN/idcheck -p clone || $CONFBIN/idcheck -y clone
if [ $? = 0 ]; then
echo "Module clone is missing from the kernel."
streamsmsg
return 1 # error
fi
# must have sp
$CONFBIN/idcheck -p sp || $CONFBIN/idcheck -y sp
if [ $? = 0 ]; then
echo "Module sp is missing from the kernel."
streamsmsg
return 1 # error
fi
if [ $system = "sco" ]; then
# must have str
$CONFBIN/idcheck -p str || $CONFBIN/idcheck -y str
if [ $? = 0 ]; then
echo "Module str is missing from the kernel."
streamsmsg
return 1 # error
fi
fi
if [ ! -c /dev/spx ]; then
echo "All neccessary STREAMS modules are configured in the kernel."
echo "But, the node /dev/spx is missing from device directory."
if [ -f $NODEFILE ]; then
echo
echo "Now that $NODEFILE has been installed,"
echo "rebuild kernel with $CONFBIN/idbuild, reboot and reinstall."
echo
else
echo
fi
return 1;
fi
return 0;
}
setup_services () {
# Need to do more for yp servers.
services=/etc/services
# Check for existence of services
if [ ! -f $services ]; then
echo
# echo "The file $services does not exist."
# echo "Skipping modifications to $services."
lineStr=`head -$ERR_SERVICES_FILE_STR1 $INSTALLRES |tail -1`
lineStr1=`head -$ERR_SERVICES_FILE_STR2 $INSTALLRES |tail -1`
echo "$lineStr $services $lineStr1"
lineStr=`head -$ERR_SERVICES_FILE_STR3 $INSTALLRES |tail -1`
echo "$lineStr $services."
echo
return;
fi
# Remove any port for LanSafe service that set in the past
file=$services
mv -f $file ${file}.ls
sed -e '
/PowerMonitor/d
' ${file}.ls > $file
rm -f ${file}.ls
# Find an appropriate port for the LanSafe service
port=`sed -e 's/#.*//' $services | awk '
NF>0 {
l = length($2);
if ($2 ~ /\/tcp$/)
tcp[substr($2, 1, l - 4)] = $1;
if ($2 ~ /\/udp$/)
udp[substr($2, 1, l - 4)] = $1;
}
END {
for (i = 3069; i < 9999; i++) {
if ((tcp[i] == "" && udp[i] == "") || \
(tcp[i] == "" && udp[i] == "ls") || \
(tcp[i] == "PowerMonitor" && udp[i] == "") || \
(tcp[i] == "PowerMonitor" && udp[i] == "ls") || \
(tcp[i] == "" && udp[i] == "lsii") || \
(tcp[i] == "lsii" && udp[i] == "") || \
(tcp[i] == "lsii" && udp[i] == "lsii")) {
print i;
break;
}
}
}
'`
check_fatal
# echo "Adding PowerMonitor services in $services."
lineStr=`head -$ADDING_LS_SERVICE $INSTALLRES |tail -1`
echo "$lineStr $services."
# Backup old services file.
mv -f $services ${services}.ls
check_fatal
# Add new lines using computed port number
sed -e '
$a\
#Port 3068 is used by PowerMonitor, PowerMonitorAgent to broadcast information.
$a\
PowerMonitor '$port'/tcp # LanSafe for Unix
$a\
PowerMonitor '$port'/udp # LanSafe for Unix
/lsii.*udp/d
/lsii.*tcp/d
' ${services}.ls > $services #Removing the older version occurences ls3.udp
cat $services |grep -v -w "ls3.udp" > ${services}.tmp
#Renaming the file to /etc/services
mv -f ${services}.tmp $services
#Removing the older version occurences ls3.tcp
cat $services |grep -v -w "ls3.tcp" > ${services}.tmp
#Renaming the file to /etc/services
mv -f ${services}.tmp $services
check_fatal
chmod 444 $services
check_fatal
# echo "Modified: $services" >> $instpath/installed
lineStr=`head -$MODIFIED_SERVICES $INSTALLRES |tail -1`
echo "$lineStr $services" >> $instpath/installed
# echo "The following lines were removed from $services:"
# lineStr=`head -$REMOVE_SERVICE_STR $INSTALLRES |tail -1`
# echo "$lineStr $services:"
# diff ${services}.ls $services | grep '^<' | sed -e 's/< //'
# echo "The following lines were added to $services:"
# lineStr=`head -$ADD_SERVICE_STR $INSTALLRES |tail -1`
# echo "$lineStr $services:"
# diff ${services}.ls $services | grep '^>' | sed -e 's/> //'
}
updateInstallPath()
{
# modify PowerMonitor.sh
InstallFile=$instpath/Bin/ls.tmp
FinalFile=$instpath/Bin/PowerMonitor.sh
mv $FinalFile $InstallFile
sed '/\usr\/Powerware\/LanSafe\/Bin/c\
instpath='$instpath"/Bin"'
' $InstallFile > $FinalFile
chmod 744 $instpath/Bin/PowerMonitor.sh
# modify uninstall.sh
InstallFile=$instpath/Bin/uninstall.tmp
FinalFile=$instpath/Bin/uninstall.sh
mv $FinalFile $InstallFile
sed '/\usr\/Powerware\/LanSafe/c\
instpath='$instpath'
' $InstallFile > $FinalFile
chmod 744 $instpath/Bin/uninstall.sh
}
darwin_startatboot ()
{
pmStartDirName=/System/Library/StartupItems/PowerMonitor
#create Directory
#change later
mkdir $pmStartDirName
#cpy start script
cp "2_$system"_$lang/PowerMonitor.startfile $pmStartDirName/PowerMonitor
#cpy StartParams file to destination
cp "2_$system"_$lang/StartupParameters.plist $pmStartDirName/StartupParameters.plist
InstallFile=$pmStartDirName/PowerMonitor.tmp
FinalFile=$pmStartDirName/PowerMonitor
mv $FinalFile $InstallFile
sed '/\usr\/Powerware\/LanSafe/c\
instpath='$instpath'
' $InstallFile > $FinalFile
#remove the temp file
rm $pmStartDirName/PowerMonitor.tmp
#set the perms on the startfile
chmod 751 $pmStartDirName/PowerMonitor
#make changes to the host config file
echo "POWERMONITOR=-YES-" >> /etc/hostconfig
}
bsd_startatboot () {
rcfile=/etc/rc.d/rc.local
mv -f $rcfile ${rcfile}.ls
check_fatal
# Use sed to remove old occurance, both lsii and ls and new occurance (when [ $startatboot = "yes" ]) of lines with the form below:
# if [ -f $instpath/ls3 ]; then
# $instpath/ls3 $instpath; echo "PowerMonitor (LanSafe Power Server)"
# fi
# echo "PowerMonitor (LanSafe Power Monitor)"
# This line is used in the following substitution of rc.local file.
lineStr=`head -$PM_DESCRIPTION $INSTALLRES |tail -1`
if [ "$startatboot" = "yes" ]; then # replace
sed -e '
$a\
if [ -f '$instpath'/Bin/PowerMonitor ]; then
$a\
\ '$instpath'/Bin/PowerMonitor&
$a\
\ echo "$lineStr"
$a\
fi
/if.*ls/,/fi/d
/if.*lsiid/,/fi/d
' ${rcfile}.ls > $rcfile
check_fatal
else # remove
sed -e '
/if.*ls/,/fi/d
/if.*lsiid/,/fi/d
' ${rcfile}.ls > $rcfile
check_fatal
fi
# Fixup perms on rcfile.
chmod 755 $rcfile
check_fatal
# echo "Modified: $rcfile" >> $instpath/installed
lineStr=`head -$MODIFIED_SERVICES $INSTALLRES |tail -1`
echo "$lineStr $rcfile" >> $instpath/installed
# echo "The following lines were removed from $rcfile:"
# lineStr=`head -$REMOVE_SERVICE_STR $INSTALLRES |tail -1`
# echo "$lineStr $rcfile:"
# diff ${rcfile}.ls $rcfile | grep '^<' | sed -e 's/< //'
# echo "The following lines were added to $rcfile:"
# lineStr=`head -$ADD_SERVICE_STR $INSTALLRES |tail -1`
# echo "$lineStr $rcfile:"
# diff ${rcfile}.ls $rcfile | grep '^>' | sed -e 's/> //'
}
sysv_startatboot_linux () {
if [ -d /sbin/init.d ]; then
# SuSe?
initfile=/sbin/init.d/ls.init
startfile=/sbin/init.d/rc3.d/S89ls.init
stopfile=/sbin/init.d/rc0.d/K89ls.init
return
fi
if [ -d /etc/rc.d/init.d ]; then
# Most Linuxes ?
initfile=/etc/rc.d/init.d/ls.init
startfile=/etc/rc.d/rc3.d/S89ls.init
startfile2=/etc/rc.d/rc5.d/S89ls.init
stopfile=/etc/rc.d/rc0.d/K89ls.init
return
fi
if [ -d /etc/init.d ]; then
# TXN-09/09/02: SuSe 7.2 or 8.0
initfile=/etc/init.d/ls.init
startfile=/etc/init.d/rc5.d/S89ls.init
if [ -d /etc/init.d/rc3.d ]; then
#Suse 9 and 10
startfile2=/etc/init.d/rc3.d/S89ls.init
fi
stopfile=/etc/init.d/rc0.d/K89ls.init
return
fi
# Other cases?
initfile=/sbin/init.d/ls.init
startfile=/sbin/rc2.d/S515ls.init
stopfile=/sbin/rc1.d/K485ls.init
}
sysv_startatboot_other () {
if [ -d /etc/init.d ]; then
initfile=/etc/init.d/ls.init
startfile=/etc/rc2.d/S89ls.init
stopfile=/etc/rc0.d/K99ls.init
return
fi
if [ $system = "dec" ]; then
initfile=/sbin/init.d/ls.init
startfile=/sbin/rc3.d/S89ls.init
stopfile=/sbin/rc0.d/K99ls.init
return
fi
initfile=/sbin/init.d/ls.init
startfile=/sbin/rc2.d/S515ls.init
stopfile=/sbin/rc1.d/K485ls.init
}
sysv_startatboot () {
# Delete lsii stuff, if it exists
lsii_initfile=/etc/init.d/lsii.init
lsii_startfile=/etc/rc2.d/S89lsii.init
lsii_stopfile=/etc/rc0.d/K99lsii.init
startfile2=
if [ $system = "linux" -o $system = "linux_el4" -o $system = "P5linux" -o $system = "P5linux_el4" -o $system = "linux_el4_amd64" -o $system = "linux_el4_ia64" ]; then
sysv_startatboot_linux
else
sysv_startatboot_other
fi
# Cleanup from previous install, okay for these to fail. First delete lsii files
if [ -f $lsii_initfile ]; then
rm -f $lsii_initfile
# echo "Removed: $lsii_initfile" >> $instpath/installed
lineStr=`head -$REMOVED_STR $INSTALLRES |tail -1`
echo "$lineStr $lsii_initfile" >> $instpath/installed
fi
if [ -f $lsii_startfile ]; then
rm -f $lsii_startfile
# echo "Removed: $lsii_startfile" >> $instpath/installed
lineStr=`head -$REMOVED_STR $INSTALLRES |tail -1`
echo "$lineStr $lsii_startfile" >> $instpath/installed
fi
if [ -f $lsii_stopfile ]; then
rm -f $lsii_stopfile
# echo "Removed: $lsii_stopfile" >> $instpath/installed
lineStr=`head -$REMOVED_STR $INSTALLRES |tail -1`
echo "$lineStr $lsii_stopfile" >> $instpath/installed
fi
# Second, Delete ls3 files
if [ -f $initfile ]; then
rm -f $initfile
# echo "Removed: $initfile" >> $instpath/installed
lineStr=`head -$REMOVED_STR $INSTALLRES |tail -1`
echo "$lineStr $initfile" >> $instpath/installed
fi
if [ -f $startfile ]; then
rm -f $startfile
# echo "Removed: $startfile" >> $instpath/installed
lineStr=`head -$REMOVED_STR $INSTALLRES |tail -1`
echo "$lineStr $startfile" >> $instpath/installed
fi
if [ -f $stopfile ]; then
rm -f $stopfile
# echo "Removed: $stopfile" >> $instpath/installed
lineStr=`head -$REMOVED_STR $INSTALLRES |tail -1`
echo "$lineStr $stopfile" >> $instpath/installed
fi
# Copy ls.init while setting install path
# echo "Ready to copy ls.init to install path"
lineStr=`head -$COPY_INIT_FILE $INSTALLRES |tail -1`
echo "$lineStr"
if [ -n "$cdrom_install" ]; then
if [ -n "$uppercase_mount" ]; then
InstallFile=1_INSTALL/LS.INIT
else
InstallFile=1_install/ls.init
fi
else
InstallFile=1_install/ls.init
fi
tmpinitfile=$initfile".tmp"
if [ "$startatboot" = "yes" ]; then
# echo_n "Installing ls.init to init.d ... "
lineStr=`head -$INSTALLING_INIT_FILE $INSTALLRES |tail -1`
echo_n "$lineStr"
lineStr=`head -$LS_VERSION $INSTALLRES |tail -1`
sed '/5.0/c\
version='$lineStr'
' $InstallFile > $tmpinitfile
sed '/\usr\/Powerware\/LanSafe\/Bin/c\
instpath='$instpath"/Bin"'
' $tmpinitfile > $initfile
rm $tmpinitfile
check_fatal
# Set permissions
chmod 755 $initfile
check_fatal
# echo "Installed: $initfile" >> $instpath/installed
lineStr=`head -$INSTALLED_STR $INSTALLRES |tail -1`
echo "$lineStr $initfile" >> $instpath/installed
# echo "done"
lineStr=`head -$INSTALLED_DONE $INSTALLRES |tail -1`
echo "$lineStr"
# Link init file in rc dirs.
if [ -f "$startfile" ]; then
# echo "Deleting $startfile"
lineStr=`head -$DELETING_FILE_STR $INSTALLRES |tail -1`
echo "$lineStr $startfile"
rm $startfile
fi
if [ -f "$startfile2" ]; then
# echo "Deleting $startfile2"
lineStr=`head -$DELETING_FILE_STR $INSTALLRES |tail -1`
echo "$lineStr $startfile2"
rm $startfile2
fi
# echo_n "Linking $startfile to $initfile ... "
lineStr=`head -$LINK_FILE_STR $INSTALLRES |tail -1`
lineStr1=`head -$INSTALL_TO $INSTALLRES |tail -1`
echo_n "$lineStr $startfile $lineStr1 $initfile ... "
if [ -d /sbin/init.d -o -d /etc/rc.d/init.d -o "$system" = linux -o "$SYSTEM" = LINUX \
-o "$system" = linux_el4 -o "$SYSTEM" = LINUX_EL4 \
-o "$system" = P5linux_el4 -o "$SYSTEM" = P5LINUX_EL4 \
-o "$system" = P5linux -o "$SYSTEM" = P5LINUX \
-o "$system" = linux_el4_amd64 -o "$SYSTEM" = LINUX_EL4_AMD64 \
-o "$system" = linux_el4_ia64 -o "$SYSTEM" = LINUX_EL4_IA64 ]; then
ln -fs $initfile $startfile
else
ln $initfile $startfile
check_fatal
# echo "Linked: $startfile to $initfile" >> $instpath/installed
lineStr=`head -$LINKED_STR $INSTALLRES |tail -1`
lineStr1=`head -$INSTALL_TO $INSTALLRES |tail -1`
echo "$lineStr: $startfile $lineStr1 $initfile" >> $instpath/installed
fi
# make sure startfile2 is not null before linking it.
if [ -n "$startfile2" ]; then
echo
# echo_n "Linking $startfile2 to $initfile ... "
lineStr=`head -$LINK_FILE_STR $INSTALLRES |tail -1`
lineStr1=`head -$INSTALL_TO $INSTALLRES |tail -1`
echo_n "$lineStr $startfile2 $lineStr1 $initfile ... "
ln -fs $initfile $startfile2
check_fatal
# echo "Linked: $startfile2 to $initfile" >> $instpath/installed
lineStr=`head -$LINKED_STR $INSTALLRES |tail -1`
lineStr1=`head -$INSTALL_TO $INSTALLRES |tail -1`
echo "$lineStr: $startfile2 $lineStr1 $initfile" >> $instpath/installed
# echo "done"
lineStr=`head -$INSTALLED_DONE $INSTALLRES |tail -1`
echo $lineStr
fi
if [ -f "$stopfile" ]; then
echo "Deleting $stopfile"
rm $stopfile
fi
# echo_n "Linking $stopfile to $initfile ... "
lineStr=`head -$LINK_FILE_STR $INSTALLRES |tail -1`
lineStr1=`head -$INSTALL_TO $INSTALLRES |tail -1`
echo_n "$lineStr $stopfile $lineStr1 $initfile ... "
if [ -d /sbin/init.d -o -d /etc/rc.d/init.d -o "$system" = linux -o "$SYSTEM" = LINUX \
-o "$system" = linux_el4 -o "$SYSTEM" = LINUX_EL4 \
-o "$system" = linux_el4_amd64 -o "$SYSTEM" = LINUX_EL4_AMD64 \
-o "$system" = linux_el4_ia64 -o "$SYSTEM" = LINUX_EL4_IA64 \
-o "$system" = P5linux -o "$SYSTEM" = P5LINUX \
-o "$system" = P5linux_el4 -o "$SYSTEM" = P5LINUX_EL4 ]; then
ln -fs $initfile $stopfile
else
ln $initfile $stopfile
fi
check_fatal
# echo "Linked: $stopfile to $initfile" >> $instpath/installed
lineStr=`head -$LINKED_STR $INSTALLRES |tail -1`
lineStr1=`head -$INSTALL_TO $INSTALLRES |tail -1`
echo "$lineStr: $stopfile $lineStr1 $initfile" >> $instpath/installed
# echo "done"
lineStr=`head -$INSTALLED_DONE $INSTALLRES |tail -1`
echo $lineStr
fi
}
inittab_startatboot () {
inittab=/etc/inittab
# Backup old inittab
mv -f $inittab ${inittab}.ls
check_fatal
# Use sed to remove old occurance of form below and add new lines of the form below
# ls3:2345:once:$instpath/ls3
if [ $startatboot = "yes" ]; then
sed -e '
$a\
PM:2345:once:'$instpath'/Bin/PowerMonitor.sh&
/^PM:2345:once:/d
/^PM:234:once:/d
/^lsii:23:once:/d
' ${inittab}.ls > $inittab
check_fatal
else
sed -e '
/^PM:2345:once:/d
/^PM:234:once:/d
/^lsii:23:once:/d
' ${inittab}.ls > $inittab
check_fatal
fi
# Fixup perms on inittab.
chmod 444 $inittab
check_fatal
# Report differences
# echo "Modified: $inittab" >> $instpath/installed
# echo "The following lines were removed from $inittab:"
# diff ${inittab}.ls $inittab | grep '^<' | sed -e 's/< //'
# echo "The following lines were added to $inittab:"
# diff ${inittab}.ls $inittab | grep '^>' | sed -e 's/> //'
lineStr=`head -$MODIFIED_SERVICES $INSTALLRES |tail -1`
echo "$lineStr $inittab" >> $instpath/installed
# lineStr=`head -$REMOVE_SERVICE_STR $INSTALLRES |tail -1`
# echo "$lineStr $inittab:"
# diff ${inittab}.ls $inittab | grep '^<' | sed -e 's/< //'
# lineStr=`head -$ADD_SERVICE_STR $INSTALLRES |tail -1`
# echo "$lineStr $inittab:"
# diff ${inittab}.ls $inittab | grep '^>' | sed -e 's/> //'
}
FixScoFile () {
# Put the the correct path into s1.objscr
File2Fix=/usr/lib/X11/XDesktop3/applications/Ls3.obj/s1.objscr
mv -f $File2Fix $File2Fix.ls
sed '/\usr\/Powerware\/LanSafe\/Bin/c\
instpath='$instpath"/Bin"'
' $File2Fix.ls > $File2Fix
}
#Function no longer used RF 6/20/03
DisableInsight() {
InsightFile=/usr/bin/compaq/ups/ups.cfg
if [ $system = "uw2" ]; then
cpqups_stopper="/etc/init.d/cpqups"
else
cpqups_stopper="/etc/cpqups"
fi
if [ -f $InsightFile -a -f $cpqups_stopper ]; then
echo
echo "Compaq Insight Manager UPS management functions must be"
echo "disabled to install LanSafe UPS management."
read_def "Do you want them disabled? (y/n) [y] " "y"
case $answer in
[yY]|[yY][eE][sS]) #/etc/cpqups stop
if [ $system = "uw2" ]; then
sh /etc/init.d/cpqups stop
else
$cpqups_stopper stop
fi
mv -f $InsightFile $InsightFile.ls
sed '/SERIAL_PORT/c\
SERIAL_PORT=""
' $InsightFile.ls > $InsightFile
;;
*)
exit 0
;;
esac
fi
}
main () {
# override=true
# global bsdecho
# global system
# global uncompress_cmd has to be set after extract
# skip_extract=true
# skip_install=true
# skip_chk4sp=true
# skip_services=true
# skip_config=true
# skip_cleanup=true
# Setup some globals
ret=TRUE;
bsdecho=`compute_echo`
# Must check parameters
SYSTEM=""
lang=""
tardev=""
if [ "$1" != "" ] ; then
get_parameters $1
fi
if [ "$2" != "" ] ; then
get_parameters $2
fi
if [ "$3" != "" ] ; then
get_parameters $3
fi
# Must set system and SYSTEM prior prompting generic AT&T SVR4 if system is undetermined.
# if [ "$1" = "" ] ; then
if [ "$SYSTEM" = "" ] ; then
compute_SYSTEM
# Need to know if we are on sco3 or sco5 at this point.
if [ "$system" = sco -o "$SYSTEM" = SCO ]; then
sco_system=`compute_sco_system`
fi
# Need to know if we are running at least DG/UX 4.20MU01 or above.
if [ "$system" = dgux -o "$SYSTEM" = DGUX ]; then
compute_dgux_system
fi
# else
# SYSTEM=$1
fi
# now convert uppercase into lower and check validity at the same time
compute_system
# Is the installation from a cd-rom?
# USED TO BE: if the name of this file is in CAPITAL letters then it is on a CD-ROM.
# NOW: if lansafe or LANSAFE dir exists -> CDROM: Andrei 4.10
if [ -d "./1_INSTALL" -o -d "./1_install" ]; then
# if [ -d "./1_INSTALL" ]; then
cdrom_install=true
skip_extract=true
skip_gettardev=tar
skip_cleanup=true
tardev=CD_ROM
elif [ "$tardev" = "" ]; then
# Cannot translate this line. No information to find where is install.res file.
# Must present to user as English
echo "Usage: ./install.sh [Language] [tarfile name] [SYSTEM]"
# lineStr=`head -$USAGE_STR $INSTALLRES |tail -1`
# echo "$lineStr"
exit 0
fi
if [ -f ./INSTALL.SH ]; then
if [ "$system" != macosx -o "$SYSTEM" != MACOSX ]; then
uppercase_mount=true
fi
fi
# Get language locale
if [ "$lang" = "" ]; then
check_locale_language
if [ -z "$lang" ]; then
lang=EN
fi
fi
# Initialize resource strings.
systemdir="2_$system"_$lang
SYSTEMDIR="2_$SYSTEM"_$lang
INSTALLRES="2_$system"_$lang/install.res
if [ "$tardev" != "" ]; then
tar -xf $tardev $systemdir/install.res >/dev/null 2>&1
elif [ ! -d "./1_INSTALL" ]; then
# Cannot translate this line. No information to find where is install.res file.
# Must present to user as English
echo "Usage: ./install.sh [Language] [tarfile name] [SYSTEM]"
exit 0
fi
initDefines
# Add code to find the language code of the OS.
# Say hello
# if system is aix3, dec, ia, linux, sunos, svr4 or sco3
# then we'll install just vanilla ls3 unix
# else
# we'll install vanilla ls3 unix and prompt for ls3 snmp agent installation.
clear
echo
echo
echo "-----------------------------------------------------------------"
echo
#MANTIS-2088
echo " EATON | Powerware"
echo
# echo "Welcome to LanSafe!"
lineStr=`head -$WELCOME_STR1 $INSTALLRES |tail -1`
echo " $lineStr"
if [ "$system" = ia -o "$SYSTEM" = IA ]; then
# echo " Version 5.0.0"
lineStr=`head -$AGENT_INSTALL_INTRO_STR2 $INSTALLRES |tail -1`
lineStr1=`head -$LS_VERSION $INSTALLRES |tail -1`
echo " $lineStr $lineStr1"
else
# echo " `pwd`/$0 Version 5.0.0"
lineStr=`head -$AGENT_INSTALL_INTRO_STR2 $INSTALLRES |tail -1`
lineStr1=`head -$LS_VERSION $INSTALLRES |tail -1`
#iecho " `pwd`/$0 $lineStr $lineStr1"
echo " $lineStr $lineStr1"
fi
echo
# echo " To install LanSafe for UNIX, select (y)"
# echo "and fill in the configuration items as they are presented to you."
lineStr=`head -$WELCOME_STR2 $INSTALLRES |tail -1`
echo "$lineStr"
lineStr=`head -$WELCOME_STR3 $INSTALLRES |tail -1`
echo "$lineStr"
echo
echo "-----------------------------------------------------------------"
echo
###############################################################
# if [ '(' "$system" = aix3 ')' -o '(' "$system" = dec ')' -o '(' "$system" = ia ')' -o '(' "$system" = linux ')' \
# -o '(' "$system" = sunos ')' -o '(' "$system" = svr4 ')' -o '(' "$SYSTEM" = AIX3 ')' -o '(' "$SYSTEM" = DEC ')' \
# -o '(' "$SYSTEM" = IA ')' -o '(' "$SYSTEM" = LINUX ')' -o '(' "$SYSTEM" = SUNOS ')' -o '(' "$SYSTEM" = SVR4 ')' \
# -o '(' x$sco_system = xsco3 ')' -o '(' "$system" = dgux ')' -o '(' "$SYSTEM" = DGUX ')' ];
################################################################
# then
# read_def " Continue installation? (y/n) [y] " "y"
################################################################
system_list="aix3 dec ia irix linux linux_el4 linux_el4_amd64 linux_el4_ia64 P5linux P5linux_el4 sunos svr4 sco3 dgux "
setFlag=0
for tmp in $system_list ;
do
if [ $system = $tmp ]
then
setFlag=1
break
fi
done
if [ $setFlag = 1 ]
then
# read_def " Continue installation? (y/n) [y] " "y"
echo
lineStr=`head -$CONTINUE_INSTALLATION $INSTALLRES |tail -1`
read_def " $lineStr (y/n) [y] " "y"
case $answer in
[yY]|[yY][eE][sS])
;;
*)
exit 0
;;
esac
else
# echo "The installation process is divided as follows:"
# echo
# echo " LanSafe for Unix will be installed first."
# echo " LanSafe SNMP agent will be installed next."
# echo
# echo "NOTE: If you already have LanSafe for Unix installed and you"
# echo " do not wish to re-install it, select (N)o to stop"
# echo " LanSafe for Unix installation. You will be then prompted"
# echo " to install LanSafe SNMP agent."
lineStr=`head -$INSTALL_INTRO_STR1 $INSTALLRES |tail -1`
echo " $lineStr"
echo
lineStr=`head -$INSTALL_INTRO_STR2 $INSTALLRES |tail -1`
echo " 1. $lineStr"
lineStr=`head -$INSTALL_INTRO_STR3 $INSTALLRES |tail -1`
echo " 2. $lineStr"
echo
echo
lineStr=`head -$INSTALL_INTRO_STR4 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$INSTALL_INTRO_STR5 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$INSTALL_INTRO_STR6 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$INSTALL_INTRO_STR7 $INSTALLRES |tail -1`
echo " $lineStr"
echo
echo
# read_def " Continue LanSafe for Unix installation? (y/n) [y] " "y"
lineStr=`head -$INSTALL_INTRO_STR8 $INSTALLRES |tail -1`
read_def " $lineStr (y/n) [y] " "y"
case $answer in
[yY]|[yY][eE][sS])
;;
*)
echo
# echo " LanSafe for SNMP installation"
# echo " Version 5.0.0"
# echo
# echo "LanSafe SNMP agent gives your SNMP manageable network node the"
# echo "capability to manage UPS information."
# echo
# echo "In order to manage SNMP information, a node must have SNMP"
# echo "daemon installed and running."
# echo
# read_def " Do you want to install LanSafe SNMP agent? (y/n) [y] " "y"
lineStr=`head -$AGENT_INSTALL_INTRO_STR1 $INSTALLRES |tail -1`
echo "-------------------------------------------------------------------------------"
echo " $lineStr"
lineStr=`head -$AGENT_INSTALL_INTRO_STR2 $INSTALLRES |tail -1`
lineStr1=`head -$LS_VERSION $INSTALLRES |tail -1`
echo " $lineStr $lineStr1"
echo "-------------------------------------------------------------------------------"
echo
lineStr=`head -$AGENT_INSTALL_INTRO_STR3 $INSTALLRES |tail -1`
echo "$lineStr"
lineStr=`head -$AGENT_INSTALL_INTRO_STR4 $INSTALLRES |tail -1`
echo "$lineStr"
lineStr=`head -$AGENT_INSTALL_INTRO_STR5 $INSTALLRES |tail -1`
echo "$lineStr"
# lineStr=`head -$AGENT_INSTALL_INTRO_STR6 $INSTALLRES |tail -1`
# echo "$lineStr"
echo
lineStr=`head -$AGENT_INSTALL_INTRO_STR7 $INSTALLRES |tail -1`
read_def " $lineStr (y/n) [y] " "y"
case $answer in
[yY]|[yY][eE][sS])
if [ -n "$skip_gettardev" ]; then
get_tardev
fi
# Different cases for dat, cdrom and floppy media.
if [ -n "$cdrom_install" ]; then
tardev=CD_ROM
echo tardev
echo $tardev
echo instpath
echo $instpath
exec sh ./AGENT.SH $tardev $instpath $installUPSType
else
echo
# agent.sh will be generic for all platforms
if [ -z "$tardev" ]; then
get_tardev
fi
tar -xf $tardev agent.sh >/dev/null 2>&1
check_status
if [ $? != 0 ]; then
# echo "Error extracting files?"
lineStr=`head -$ERR_EXTRACTING_FILE $INSTALLRES |tail -1`
echo $lineStr
exit 0
fi
exec sh ./agent.sh $tardev $instpath
# exec sh -x ./agent.sh $tardev
fi
;;
*) #default for "Do you want to install ls3 snmp agent?"
exit 0
;;
esac
;;
esac
fi # end-of big "if system aix3 -o system -o dec.. "
if [ x"$system" = x"Unknown System" ]
then
echo
# echo " Unable to determine your system."
lineStr=`head -$ERR_UNKNOWN_SYSTEM $INSTALLRES |tail -1`
echo " $lineStr"
answer=""
while [ -z "$answer" ]; do
echo
# echo "Answering (N)o to this question will exit install.sh without installing LanSafe."
# echo
# read_def " Do you want to install LanSafe for AT&T SVR4 derivative? (y/n) "
lineStr=`head -$SVR4_AGENT_INSTALL_STR1 $INSTALLRES |tail -1`
echo $lineStr
echo
lineStr=`head -$SVR4_AGENT_INSTALL_STR2 $INSTALLRES |tail -1`
read_def " $lineStr (y/n) "
case $answer in
[yY]|[yY][eE][sS])
system=svr4
SYSTEM=SVR4
;;
[nN]|[nN][Oo])
exit 0
;;
*)
answer=""
;;
esac
done
fi # end-of "if system = Unknown system"
echo
echo
if [ -n "$cdrom_install" ]; then
# read_def "Are you installing from a CD-ROM? (y/n) [y] " "y"
# echo "Installing from CD-ROM"
lineStr=`head -$INSTALL_SOURCE_CDROM $INSTALLRES |tail -1`
echo " $lineStr"
echo
else
# read_def "Are you installing from a CD-ROM? (y/n) [n] " "n"
# echo "Installing from tarfile"
lineStr=`head -$INSTALL_SOURCE_TARFILE $INSTALLRES |tail -1`
echo "$lineStr"
echo
fi
# case $answer in
# [yY]|[yY][eE][sS])
# cdrom_install=true
# skip_extract=true
# skip_gettardev=tar
# skip_cleanup=true
# tardev=CD_ROM
# uppercase_mount=true
# ;;
# esac
# Prompt for answers to all questions, with verify.
userverified=""
while [ -z "$userverified" ]; do
# Get device for file extraction.
if [ -z "$skip_gettardev" ]; then
get_tardev
fi
# Get install path
defpath=/usr/Powerware/LanSafe
instpath=
newpath=
while [ -z "$instpath" ]; do
newpath=$defpath
echo
# echo "The default install path name for this software is: $defpath"
lineStr=`head -$DEFAULT_PATH_STR $INSTALLRES |tail -1`
echo " $lineStr"
echo " $defpath"
echo
# read_def ' Do you want to continue with this install path? (y/n) [n] ' "n"
lineStr=`head -$ASK_CHANGE_INSTALL_PATH $INSTALLRES |tail -1`
read_def " $lineStr (y/n) [y] " "y"
case $answer in
[nN]|[nN][oO])
# read_def " Enter absolute install path: "
lineStr=`head -$ENTER_INSTALL_PATH $INSTALLRES |tail -1`
read_def " $lineStr "
newpath=$answer
case $newpath in
/) echo
lineStr=`head -$ERR_INSTALL_ROOT_PATH $INSTALLRES |tail -1`
echo $lineStr
newpath=
;;
/*)
echo
# echo "New install path is: $answer"
lineStr=`head -$NEW_PATH $INSTALLRES |tail -1`
echo " $lineStr $answer"
# read_def ' Is this OK? (y/n) [y] ' "y"
lineStr=`head -$OK_STR $INSTALLRES |tail -1`
read_def " $lineStr (y/n) [y] " "y"
case $answer in
[yY]|[yY][eE][sS])
;;
*)
newpath=
;;
esac
;;
*)
echo
# echo " Warning: You must enter absolute path to install directory. e.g. $defpath"
lineStr=`head -$ERR_INSTALL_PATH $INSTALLRES |tail -1`
echo " $lineStr"
echo " $defpath"
newpath=
esac
esac
if [ ! -z "$newpath" ]; then
create_path $newpath
if [ $? = 0 ]; then
instpath=$newpath
else
# echo "Unable to install to $newpath. Choose another directory."
lineStr=`head -$ERR_AGENT_INSTALL_PATH_STR1 $INSTALLRES |tail -1`
lineStr1=`head -$ERR_AGENT_INSTALL_PATH_STR2 $INSTALLRES |tail -1`
echo "$lineStr $newpath. $lineStr1"
fi
# bitmapdir=$newpath"/bitmaps"
# create_path $bitmapdir
# if [ $? != 0 ]; then
# echo "Unable to create bitmaps directory"
# fi
fi
done # end-of while $instpath
if [ "$system" = linux -o "$SYSTEM" = LINUX \
-o "$system" = linux_el4 -o "$SYSTEM" = LINUX_EL4 \
-o "$system" = linux_el4_amd64 -o "$SYSTEM" = LINUX_EL4_AMD64 \
-o "$system" = linux_el4_ia64 -o "$SYSTEM" = LINUX_EL4_IA64 \
-o "$system" = P5linux -o "$SYSTEM" = P5LINUX \
-o "$system" = P5linux_el4 -o "$SYSTEM" = P5LINUX_EL4 ]; then
fixup_linux_system
fi
# Get start at boot flag
# echo "Automatic Startup"
# echo "To automatically run LanSafe upon startup on the computer"
# echo "being installed, enter (y)es, otherwise enter (n)o."
# echo "NOTE: It is strongly recommended that you select Yes for this option"
# echo "in order to provide full protection from multiple power outages."
# echo
# read_def " Automatically run LanSafe power monitor daemon on startup? (y/n) [y] " "y"
echo
# lineStr=`head -$AUTO_START_STR1 $INSTALLRES |tail -1`
# echo $lineStr
# lineStr=`head -$AUTO_START_STR2 $INSTALLRES |tail -1`
# echo $lineStr
# lineStr=`head -$AUTO_START_STR3 $INSTALLRES |tail -1`
# echo $lineStr
# lineStr=`head -$AUTO_START_STR4 $INSTALLRES |tail -1`
# echo $lineStr
# lineStr=`head -$AUTO_START_STR5 $INSTALLRES |tail -1`
# echo $lineStr
# echo
# PowerMonitor always start at reboot. No need to ask user. 3/11/04
# lineStr=`head -$AUTO_START_STR6 $INSTALLRES |tail -1`
# read_def " $lineStr (y/n) [y] " "y"
# case $answer in
# [yY]|[yY][eE][sS])
# startatboot="yes"
# ;;
# *)
# startatboot="no"
# ;;
# esac
startatboot="yes"
echo
echo "---------------------------------------------------------------"
# echo "LanSafe Installation Parameters:"
# echo
# echo " Device or tarfile to install from is : $tardev"
# echo " Directory to install to is: $instpath"
# echo " Automatically run LanSafe on startup: $startatboot"
lineStr=`head -$CONFIRM_INSTALL_PARAMS_STR1 $INSTALLRES |tail -1`
echo " $lineStr"
echo
lineStr=`head -$CONFIRM_INSTALL_PARAMS_STR2 $INSTALLRES |tail -1`
echo " $lineStr $tardev"
lineStr=`head -$CONFIRM_INSTALL_PARAMS_STR3 $INSTALLRES |tail -1`
echo " $lineStr $instpath"
# lineStr=`head -$CONFIRM_INSTALL_PARAMS_STR4 $INSTALLRES |tail -1`
# echo " $lineStr $startatboot"
echo "---------------------------------------------------------------"
echo
answer=""
while [ -z "$answer" ]; do
echo
# read_def " Are these installation parameters acceptable? (y/n) "
lineStr=`head -$CONFIRM_INSTALL_PARAMS_STR5 $INSTALLRES |tail -1`
read_def " $lineStr (y/n) "
done
case $answer in
[yY]|[yY][eE][sS])
userverified=true
;;
esac
done
# Create Flag and Export directory.
if [ ! -z "$newpath" ]; then
bitmapdir=$newpath"/Flag"
create_path $bitmapdir
bitmapdir=$newpath"/Export"
create_path $bitmapdir
bitmapdir=$newpath"/Log"
create_path $bitmapdir
fi
# Modify how to extract license.txt file. Doesn't need to copy out from 2_$system for language support.
# Extract files
# tardev="", tardev set above!
if [ -z "$skip_extract" ]; then
extract_files
tar -xvf $tardev $systemdir/license.txt >/dev/null 2>&1
echo "Extracting files completed"
echo " "
fi
# License Agreement
echo " "
# echo "License Agreement: "
lineStr=`head -$LICENSE_AGREEMENT $INSTALLRES |tail -1`
echo "$lineStr"
echo
if [ -z "$skip_config" ]; then
if [ -f ./$systemdir/readLic ]; then
cd $systemdir
./readLic
AgreedLicense=$?
elif [ -f ./"2_$system"_$lang/readlic ]; then
cd "2_$system"_$lang
./readlic
AgreedLicense=$?
elif [ -f ./$SYSTEMDIR/READLIC ]; then
cd $SYSTEMDIR
./READLIC
AgreedLicense=$?
fi
cd ..
if [ $AgreedLicense != "1" ]; then
echo " "
# echo "Install failed!"
lineStr=`head -$ERR_LIC_AGREE $INSTALLRES |tail -1`
echo "$lineStr"
exit 1
fi
fi
# Install files
if [ -z "$skip_install" ]; then
install_files
fi
# Not used RF 6/19/03
# Do not need to translate
# Check for stream pipes in kernel
if [ -z "$skip_chk4sp" ]; then
chk4sp
check_fatal
fi
# Setup /etc/services
if [ -z "$skip_services" ]; then
setup_services
fi
# Setup auto start on boot
editAutoFile="false"
if [ "$system" = macosx -o "$SYSTEM" = MACOSX ]; then
echo " darwin_startatboot "
darwin_startatboot
editAutoFile="true"
fi
initd_tmp=""
if [ -d /etc/init.d -o -d /sbin/init.d -o -d /etc/rc.d/init.d ]; then
initd_tmp=true
else
initd_tmp=false
fi
if [ "$initd_tmp" = true -a "$system" != aix -a "$SYSTEM" != AIX4 ]; then
echo "sysv_startatboot"
sysv_startatboot
editAutoFile="true"
elif [ -f /etc/inittab ]; then
echo "inittab_startatboot"
inittab_startatboot
editAutoFile="true"
elif [ -f /etc/rc.d/rc.local ]; then
echo " bsd_startatboot "
bsd_startatboot
editAutoFile="true"
fi
# Update Install Path in PowerMonitor.sh and uninstall.sh
updateInstallPath
if [ $editAutoFile = "false" ]; then
echo " UNDETERMINE "
if [ $startatboot = "yes" ]; then
echo
echo
echo "-------------------------------------------------------"
# echo " Unable to determine how to make your system "
# echo " automatically load the Power Monitor at boot time. "
# echo " Consult the manual for your system. "
lineStr=`head -$ERR_AUTO_LOAD_STR1 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_AUTO_LOAD_STR2 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_AUTO_LOAD_STR3 $INSTALLRES |tail -1`
echo " $lineStr"
echo "-------------------------------------------------------"
echo
echo
# read_def " Okay? (y) [y] "
lineStr=`head -$CONFIRM_OK $INSTALLRES |tail -1`
read_def " $lineStr (y) [y] "
fi
fi
# Disable the Insight UPS device driver
DisableInsight
# Move the bitmap files to the bitmaps directory
# bitmaps=$instpath"/*.bmp"
# bitmapdir=$instpath"/bitmaps"
# mv $bitmaps $bitmapdir
# RF - 03/12/03
# No need to fix this file since we are not using cosole
# If on SCO - Change the s1.objscr file to point to install directory
# if [ $system = "sco" ]; then
# FixScoFile
# fi
# Kill the ls3 daemon if it is running so the copy during installation will run OK
kill_ls3
# Run install.ls to build initial ls3.cfg
# If an old ls3.cfg exits then values in it are used for defaults.
echo
echo
if [ -z "$skip_config" ]; then
orig_dir=`pwd`
cd $instpath/Bin
./install.ls
InstallNUM="$?"
cd $orig_dir
if [ $? = 456 ]; then
installUPSType="Network"
else
installUPSType="Serial"
fi
fi
# LS v5 no longer support UW2. 3/10/04
# Install the UPS device driver.
# RF 4/9/04
# Dry contact ups is not tested in SCO.
# There is no need to install dry contact driver
skip_upsdrv=true
if [ -z "$skip_upsdrv" ]; then
if [ $system = "uw2" ]; then
# echo "LanSafe does not support UnixWare 2.x with a Dry Contact UPS"
lineStr=`head -$ERR_UW2_DRY_CONTACT_UPS $INSTALLRES |tail -1`
echo "$lineStr"
ret=FALSE
elif [ "$sco_system" = sco5 ]; then
install_upsdrv
fi
fi
# Start PowerMonitor
if [ "$startatboot" = "yes" ]; then
$instpath/Bin/PowerMonitor.sh
fi
# PowerMonitorAgent available for aix, hp9, hp10, solaris intel, solaris sparc, uw2 and sco5
if [ '(' "$system" = aix ')' -o '(' "$system" = solint ')' -o '(' "$system" = solari ')' -o '(' "$system" = uw2 ')' \
-o '(' "$SYSTEM" = AIX4 ')' -o '(' "$SYSTEM" = AIX5 ')' -o '(' "$system" = SOLINT ')' -o '(' "$SYSTEM" = SOLARI ')' \
-o '(' "$SYSTEM" = UW2 ')' -o '(' "$SYSTEM" = HPUX ')' -o '(' "$system" = hpux ')' -o '(' x"$sco_system" = xsco5 ')' ];
then
echo
# echo "LanSafe for SNMP installation"
# echo "-----------------------------"
# echo
# echo "LanSafe SNMP gives your SNMP manageable network node the"
# echo "capability to manage UPS information."
# echo
# echo "In order to manage SNMP information, a node must have SNMP"
# echo "daemon installed and running."
# echo
# read_def " Do you want to install LanSafe SNMP agent? (y/n) [y] " "y"
lineStr=`head -$AGENT_INSTALL_INTRO_STR1 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$AGENT_INSTALL_INTRO_STR2 $INSTALLRES |tail -1`
lineStr1=`head -$LS_VERSION $INSTALLRES |tail -1`
echo " $lineStr $lineStr1"
echo
lineStr=`head -$AGENT_INSTALL_INTRO_STR3 $INSTALLRES |tail -1`
echo "$lineStr"
lineStr=`head -$AGENT_INSTALL_INTRO_STR4 $INSTALLRES |tail -1`
echo "$lineStr"
lineStr=`head -$AGENT_INSTALL_INTRO_STR5 $INSTALLRES |tail -1`
echo "$lineStr"
# lineStr=`head -$AGENT_INSTALL_INTRO_STR6 $INSTALLRES |tail -1`
# echo "$lineStr"
echo
lineStr=`head -$AGENT_INSTALL_INTRO_STR7 $INSTALLRES |tail -1`
read_def " $lineStr (y/n) [y] " "y"
case $answer in
[yY]|[yY][eE][sS])
if [ -z "skip_gettardev" ]; then
get_tardev
fi
# Different cases for dat, cdrom and floppy media.
if [ -n "$cdrom_install" ]; then
if [ -n "$uppercase_mount" ]; then
exec sh ./AGENT.SH $tardev $instpath
else
exec sh ./agent.sh $tardev $instpath
fi
fi
if [ -z "$tar_install" ]; then
echo
echo_n "Insert $system disk # 1... press Enter when ready. ."
read x
fi
echo
# echo "Now extracting LanSafe SNMP agent installation script. Please wait..."
lineStr=`head -$EXTRACT_AGENT_WAIT $INSTALLRES |tail -1`
echo "$lineStr"
tar -xf $tardev agent.sh >/dev/null 2>&1
check_status
if [ $? != 0 ]; then
# echo "Error extracting files?"
lineStr=`head -$ERR_EXTRACT_AGENT $INSTALLRES |tail -1`
echo "$lineStr"
exit 0
fi
exec sh ./agent.sh $tardev $instpath
;;
*)
# Clean up
# if [ -z "$skip_cleanup" ]; then
# rm -rf `compute_tapedirs`
# rm -f install.sh
# rm -f agent.sh
# rm -f readLic
# rm -f license.txt
# fi
;;
esac
# else # This is else for if [ "$system" != aix3 -o "$system" != dec -o "$system" != ia ..."
# Clean up
# if [ -z "$skip_cleanup" ]; then
# rm -rf `compute_tapedirs`
# rm -f install.sh
# rm -f agent.sh
# rm -f readLic
# rm -f license.txt
# fi
fi
# If HP-UX 10.0, check for transition links.
if [ $system = "hpux" ]; then
set `uname -a`
if [ $3 = "B.10.00" ]; then
set `swlist -l fileset Upgrade.UPG-TLINK | grep B.10.00 | wc -l`
if [ $1 != 1 ]; then
echo
echo "---------------------------------------------------------------"
# echo " LanSafe Notification:"
# echo " LanSafe requires HP-UX 10.0 transition links which"
# echo " may not be installed on your system. See Installing"
# echo " HP-UX 10.0 and the swinstall manpage for further"
# echo " information."
lineStr=`head -$ERR_LINK_HPUX_STR1 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_LINK_HPUX_STR2 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_LINK_HPUX_STR3 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_LINK_HPUX_STR4 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_LINK_HPUX_STR5 $INSTALLRES |tail -1`
echo " $lineStr"
echo "---------------------------------------------------------------"
echo
# read_one "Press ENTER to continue: "
lineStr=`head -$PRESS_CONTINUE $INSTALLRES |tail -1`
read_one "$lineStr "
echo
fi
fi
fi
# If SunOS, check for Motif patch and notify installer if they need it. Also, let them know about the -nosunview switch for xnews.
if [ $system = "sunos" ]; then
$instpath/chk4patch.sh
if [ $? != 0 ]; then
echo
echo "---------------------------------------------------------------"
echo " LanSafe Notification:"
echo " SunOS 4.1.3 requires a patch to run Motif applications."
echo " LanSafe may require the patch in order to run the"
echo " ls3X and ls3conX applications while using the xnews X"
echo " server. The patch is not required to run the ls3 and"
echo " ls3con applications (Power Monitor and the character"
echo " based LanSafe Console). Contact Sun Microsystems"
echo " for patch number 100444-66."
lineStr=`head -$ERR_LINK_SUNOS_STR1 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_LINK_SUNOS_STR2 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_LINK_SUNOS_STR3 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_LINK_SUNOS_STR4 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_LINK_SUNOS_STR5 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_LINK_SUNOS_STR6 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_LINK_SUNOS_STR7 $INSTALLRES |tail -1`
echo " $lineStr"
lineStr=`head -$ERR_LINK_SUNOS_STR8 $INSTALLRES |tail -1`
echo " $lineStr"
echo "---------------------------------------------------------------"
echo
fi
# echo
# echo "---------------------------------------------------------------"
# echo " LanSafe Notification:"
# echo " If the openwin script is used to start the Open Look Window"
# echo " Manager (olwm) and the xnews X server, it will need to be"
# echo " started with the -nosunview switch in order for context"
# echo " senstive help to be enabled in the ls3X and ls3conX"
# echo " applications."
# echo "---------------------------------------------------------------"
# echo
# read_one "Press ENTER to continue: "
# echo
fi
# Say goodbye
if [ $ret = "TRUE" ]; then
echo "---------------------------------------------------------------"
# echo " LanSafe was successfully installed on your system. "
lineStr=`head -$SUCCESS_INSTALLED_LS $INSTALLRES |tail -1`
echo " $lineStr"
echo "---------------------------------------------------------------"
echo
echo
# echo "Registration:"
lineStr=`head -$REGISTRATION_STR1 $INSTALLRES |tail -1`
echo "$lineStr"
echo
# read_def "Would you like to register LanSafe now? (y/n) [y]" "y"
lineStr=`head -$REGISTRATION_STR2 $INSTALLRES |tail -1`
#MANTIS -2088
#read_def "$lineStr (y/n) [y]" "y"
case $answer in
[yY]|[yY][eE][sS])
# echo "Web browser may take a few seconds to start."
#lineStr=`head -$WARN_WEB_BROWSER $INSTALLRES |tail -1`
#echo "$lineStr"
#exec netscape "http://www.powerware.com/Products/Software/reg_form.asp" &
#echo
lineStr=`head -$REGISTER_WEBSITE $INSTALLRES |tail -1`
echo "$lineStr"
;;
*)
lineStr=`head -$REGISTER_WEBSITE $INSTALLRES |tail -1`
echo "$lineStr"
;;
esac
else
echo "-----------------------------------------------------------------------------"
# echo " WARNING: LanSafe was NOT successfully installed on your system. "
lineStr=`head -$UNSUCCESS_INSTALLED_LS $INSTALLRES |tail -1`
echo " $lineStr"
echo "-----------------------------------------------------------------------------"
echo
fi
# Clean up
if [ -z "$skip_cleanup" ]; then
rm -rf `compute_tapedirs`
rm -f install.sh
rm -f agent.sh
# rm -f picture.px
# rm -f s1.objscr
rm -f readLic
rm -f license.txt
fi
if [ -f "$instpath"/Bin/Network.txt ]; then
rm -f "$instpath"/Bin/Network.txt
fi
}
main $1 $2 $3