#===================================================
# File: Sample :"aastra.cfg" file
#
# Notes:
# The general format used here is similar to configuration files
# used by several UNIX-based programs. Any text following a number
# sign (#) is considered to be a comment, unless the number sign is
# contained within double-quotes ("#") where it is considered to be
# a pound. For Boolean fields, 0 = false, 1 = true.
#
# Comments:
# This file contains sample configurations for the "aastra.cfg"
# file. The settings included here are examples only.You should
# change/comment the values to suit your requirements.
#
# DHCP Setting
# ============
dhcp: 1 # DHCP enabled.
# DHCP:
# 0 = false, means DHCP is disabled.
# 1 = true, means DHCP is enabled.
# Notes: If DHCP is disabled, the following network settings will
# have to be configured manually either through the configuration
# files, the Options List in the phone, or the Web Client: IP
# Address (of the phone), Subnet Mask, Gateway, DNS, and TFTP
# Server.
#----------------------------------------------------------------------
# Network Settings
# ================
# Notes: If DHCP is enabled, you do not need to set these network
# settings
#subnet mask:
#default gateway:
#dns1:
#dns2:
#tftp server: tftp.example.com
http server: www.example.com
http path: VoipConf
alternate tftp server: 192.168.1.1
use alternate tftp: 1
# Additional Network Settings:
===========================
#sip registration time: 300 # Eg. every 300 seconds, a re-register
# request is sent to the SIP server.
#sip rtp port: 3000 # Eg. RTP packets are sent to port 3000.
sip silence suppression: 1 # "0" = off, "1" = on, "2" = default
sip registration period: 300 # 5 minute registration instead of default 2 minute.
#----------------------------------------------------------------------
# SIP registrar and Proxy Server Settings
# =======================================
#sip proxy ip: # IP of proxy server.
#sip proxy port: 5060 # 5060 is set by default.
#sip registrar ip: # IP of registrar.
#sip registrar port: 5060 # 5060 is set by default.
sip proxy ip: voip.example.com
sip registrar ip: voip.example.com
sip backup proxy ip: voip2.example.com
sip backup registrar ip: voip2.example.com
# Time in seconds before which the phone automatically
# starts calling the dialed number
sip digit timeout: 5
#----------------------------------------------------------------------
# Time Server Settings
# ====================
#time server disabled: 1 # Time server disabled.
#time server1: # Enable time server and enter at
#time server2: # least one time server IP address.
#time server3:
# Time Server Disabled:
# 0 = false, means the time server is not disabled.
# 1 = true, means the time server is disabled.
# Notes: If the time server is enabled you will need to enter the
# IP address of at least one time server. If the time server is
# disabled, the time can be set manually in the phone's Options
# List under option "2. Time and Date".
time server disabled: 0
time server1: voip.example.com
time server2:
time server3:
time zone code: EST
time zone name: US-Eastern
#auto resync time: 04:30
#auto resync mode: 3
#----------------------------------------------------------------------
# Line Settings
# =============
# Lines should be set in the <mac>.cfg file since these settings
# are unique to each phone. See the sample "<mac>.cfg" file for
# for more information.
headset tx gain: 0
headset sidetone gain: 0
handset tx gain:0
handset sidetone gain: 0
handsfree tx gain: 0
#----------------------------------------------------------------------
# Programmable key Settings
# =========================
# Programmable keys can be set either server wide or unique to each phone.
# Setting programmable keys as done in the "<mac>.cfg" file are
# unique to each phone.
# Notes: There are a maximum of 7 keys that can be configured
# on the 9133i phone. These can be set up through either of the 2
# configuration files, depending on whether this is to be server
# wide ("aastra.cfg") or phone specific ("[mac].cfg").
# Each key needs to be numbered from 1 - 7, for example
# "prgkey7 type: speeddial". Programmable keys can be set up as speeddials.
# PRGKEY TYPE: "speeddial"
# PRGKEY NAME: Alpha numeric name for the programmable key.
# The maximum number of characters for this value is 10.
# PRGKEY VALUE: Any DTMFs (from # 0 - 9, *, "
# ") or a comma (,) for 500ms pause and
# 'E' for On-hook can be set for the value.
prgkey1 type: speeddial
prgkey1 label: "Ext Pickup"
prgkey1 value: *8
# Phone side dnd key
prgkey2 type: dnd
prgkey2 label:
prgkey2 value:
prgkey3 type: speeddial
prgkey3 label: "CallFwdOn"
prgkey3 value: *72
prgkey4 type: speeddial
prgkey4 label: "CallFwdOff"
prgkey4 value: *73
# Server side dnd
prgkey5 type: speeddial
prgkey5 label: "DND On"
prgkey5 value: *78
# Server side dnd
prgkey6 type: speeddial
prgkey6 label: "DND Off"
prgkey6 value: *79
prgkey7 type: speeddial
prgkey7 label: "VoiceMail"
prgkey7 value: *97
#directory 1: directory.csv
#==================================================================
#Config to dump to syslog server
# just place the line bellow that is commented out enable it in the phones config
#log server ip: 192.168.1.1
log server port: 514
# Log Level values: 0 (Debug), 1 (Info), 2 (Warn), 3 (Error), 4 (Fatal)
log level: 0