rendered paste body /
Config file read, 1024 bytes
Welcome
Welcome to yaboot version 1.3.13 (Red Hat 1.3.13-4.fc7)
Enter "help" to get some basic usage information
boot:
linux f7
boot: f7
Please wait, loading kernel...
Elf32 kernel loaded...
zImage starting: loaded at 0x004001f8 (sp: 0x00eff930)
Allocating 0x3e7e08 bytes for kernel ...
OF version = 'IBM,TCP05287'
gunzipping (0x00800000 <- 0x004071f8:0x005c95d6)...done 0x3be8a4 bytes
Linux/PowerPC load: root=/dev/VolGroup00/LogVol00 ro
Finalizing device tree... using OF tree (promptr=00c1a078)
OF stdout device is: /pci@80000000/isa@b/serial@i3f8
command line: root=/dev/VolGroup00/LogVol00 ro
memory layout at init:
alloc_bottom : 00bec000
alloc_top : 20000000
alloc_top_hi : 20000000
rmo_top : 20000000
ram_top : 20000000
Looking for displays
instantiating rtas at 0x1ffe5000 ... done
00000000 : boot cpu 00000000
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x010ed000 -> 0x010edcac
Device tree struct 0x010ee000 -> 0x010f2000
Calling quiesce ...
returning from prom_init
Using CHRP machine description
Total memory = 512MB; using 1024kB for hash table (at cff00000)
Linux version 2.6.23.1-13.fc7smp (patrick@hades.puzzled.xs4all.nl) (gcc version7
console [udbg0] enabled
chrp type = 5 [IBM or Longtrail]
PCI buses 0..1 controlled by /pci@80000000 at 80000000
Zone PFN ranges:
DMA 0 -> 131072
Normal 131072 -> 131072
HighMem 131072 -> 131072
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 131072
Built 1 zonelists in Zone order. Total pages: 130048
Kernel command line: root=/dev/VolGroup00/LogVol00 ro
OpenPIC at fcec0000
OpenPIC irqs 0..15 in IDU
mpic: Setting up MPIC " MPIC " version 1.0 at fcec0000, max 4 CPUs
mpic: ISU size: 16, shift: 4, mask: f
mpic: Initializing for 16 sources
i8259 legacy interrupt controller initialized
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 514176k/524288k available (3632k kernel code, 9724k reserved, 124k data)
Mount-cache hash table entries: 512
device-tree: Duplicate name in /cpus/PowerPC,604e@0, renamed to "l2-cache#1"
Brought up 1 CPUs
NET: Registered protocol family 16
CHRP nvram contains 32768 bytes
RTAS Event Scan Rate: 1 (14750 jiffies)
PCI: Probing PCI hardware
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 786432 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Generic RTC Driver v1.07
Macintosh non-volatile memory driver v1.1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
console handover: boot [u]
serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
serial8250.0: ttyS2 at I/O 0x898 (irq = 15) is a 16550A
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
pcnet32.c:v1.33 27.Jun.2006 tsbogend@alpha.franken.de
PCI: Enabling device 0000:00:0c.0 (0140 -> 0143)
pcnet32: PCnet/FAST 79C971 at 0xbff800, 00 04 ac 31 10 8c
tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoU
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 17.
pcnet32: Found PHY 2000:5c01 at address 1.
eth0: registered as PCnet/FAST 79C971
pcnet32: 1 cards_found.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
W82C105: IDE controller at PCI slot 0000:00:0b.1
PCI: Enabling device 0000:00:0b.1 (0140 -> 0141)
W82C105: chipset revision 5
W82C105: 100% native mode on irq 255
ide0: BM-DMA at 0xbff000-0xbff007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xbff008-0xbff00f, BIOS settings: hdc:pio, hdd:pio
PCI: Enabling device 0000:00:10.0 (0140 -> 0143)
sym0: <875> rev 0x4 at pci 0000:00:10.0 irq 18
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
scsi 0:0:2:0: Direct-Access IBM DDRS-34560D DC1B PQ: 0 ANSI: 2
target0:0:2: tagged command queuing enabled, command queue depth 16.
target0:0:2: Beginning Domain Validation
target0:0:2: asynchronous
target0:0:2: wide asynchronous
target0:0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
target0:0:2: Domain Validation skipping write tests
target0:0:2: Ending Domain Validation
scsi 0:0:3:0: CD-ROM IBM CDRM00203 1_00 PQ: 0 ANSI: 2
target0:0:3: Beginning Domain Validation
target0:0:3: asynchronous
target0:0:3: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
target0:0:3: Domain Validation skipping write tests
target0:0:3: Ending Domain Validation
target0:0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
scsi 0:0:4:0: Direct-Access IBM DDRS-34560D DC2G PQ: 0 ANSI: 2
target0:0:4: tagged command queuing enabled, command queue depth 16.
target0:0:4: Beginning Domain Validation
target0:0:4: asynchronous
target0:0:4: wide asynchronous
target0:0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
target0:0:4: Domain Validation skipping write tests
target0:0:4: Ending Domain Validation
st: Version 20070203, fixed bufsize 32768, s/g segs 256
sd 0:0:2:0: [sda] 8925000 512-byte hardware sectors (4570 MB)
sd 0:0:2:0: [sda] Write Protect is off
sd 0:0:2:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPA
sd 0:0:2:0: [sda] 8925000 512-byte hardware sectors (4570 MB)
sd 0:0:2:0: [sda] Write Protect is off
sd 0:0:2:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPA
sda: sda1 sda2 sda3
sd 0:0:2:0: [sda] Attached SCSI disk
sd 0:0:4:0: [sdb] 8813870 512-byte hardware sectors (4513 MB)
sd 0:0:4:0: [sdb] Write Protect is off
sd 0:0:4:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DA
sd 0:0:4:0: [sdb] 8813870 512-byte hardware sectors (4513 MB)
sd 0:0:4:0: [sdb] Write Protect is off
sd 0:0:4:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DA
sdb: sdb1
sd 0:0:4:0: [sdb] Attached SCSI disk
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.20
sd 0:0:2:0: Attached scsi generic sg0 type 0
sr 0:0:3:0: Attached scsi generic sg1 type 5
sd 0:0:4:0: Attached scsi generic sg2 type 0
usbmon: debugfs is not available
USB Universal Host Controller Interface driver v3.0
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
atkbd.c: keyboard reset failed on isa0060/serio0
atkbd.c: keyboard reset failed on isa0060/serio1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Cannot open root device "VolGroup00/LogVol00" or unknown-block(0,0)
Please append a correct "root=" boot option; here are the available partitions:
0800 4462500 sda driver: sd
0801 4340 sda1
0802 100533 sda2
0803 4353516 sda3
0810 4406935 sdb driver: sd
0811 4403767 sdb1
0b00 1048575 sr0 driver: sr
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Rebooting in 180 seconds..