#!/bin/sh## Config script for UnrealIRCd# (C) 2001 The UnrealIRCd Team## This configure script is free software; the UnrealIRCd Team gives# unlimited permission to copy, distribute and modify as long as the# copyright headers stay intact### Rewritten completely to be an interface to autoconf by codemastr# This was inspired by the config by Michael Graff (explorer@flame.org)# but was written from scratch# In order to be faster than the old Config, this assumes that all information# in the cache file is valid and therefore doesn't check it, so if you messed with# default values thats your problem :P# some bits edited by baafie on March 17 2004, every change marked.RUN_CONFIGURE () {ARG=""# Do this even if we're not in advanced modeif [ "$SHOWLISTMODES" = "1" ] ; then ARG="$ARG--with-showlistmodes "fiif [ "$ADVANCED" = "1" ] ; thenif [ "$TOPICNICKISNUH" = "1" ] ; then ARG="$ARG--with-topicisnuhost "fiif [ "$SHUNNOTICES" = "1" ] ; then ARG="$ARG--with-shunnotices "fiif [ "$NOOPEROVERRIDE" = "1" ] ; then ARG="$ARG--with-no-operoverride "fiif [ "$DISABLEUSERMOD" = "1" ] ; then ARG="$ARG--with-disableusermod "fiif [ "$OPEROVERRIDEVERIFY" = "1" ] ; then ARG="$ARG--with-operoverride-verify "fifiif [ "$NOSPOOF" = "1" ] ; thenARG="$ARG--enable-nospoof "fiif [ -n "$HUB" ] ; thenARG="$ARG--enable-hub "fiif [ "$CRYPTOIRCD" = "1" ] ; thenif test x"$SSLDIR" = "x" ; thenARG="$ARG--enable-ssl "elseARG="$ARG--enable-ssl=$SSLDIR "fifiif [ "$ZIPLINKS" = "1" ] ; thenif test x"$ZIPLINKSDIR" = "x" ; thenARG="$ARG--enable-ziplinks "elseARG="$ARG--enable-ziplinks=$ZIPLINKSDIR "fifiif [ "$REMOTEINC" = "1" ] ; thenARG="$ARG--enable-libcurl=$CURLDIR "fiif [ "$INET6" = "1" ] ; thenARG="$ARG--enable-inet6 "fiif [ "$PREFIXAQ" = "1" ]; thenARG="$ARG--enable-prefixaq "fiARG="$ARG--with-listen=$LISTEN_SIZE "ARG="$ARG--with-dpath=$DPATH "ARG="$ARG--with-spath=$SPATH "ARG="$ARG--with-nick-history=$NICKNAMEHISTORYLENGTH "ARG="$ARG--with-sendq=$MAXSENDQLENGTH "ARG="$ARG--with-bufferpool=$BUFFERPOOL "ARG="$ARG--with-hostname=$DOMAINNAME "ARG="$ARG--with-permissions=$DEFPERM "ARG="$ARG--with-fd-setsize=$MAXCONNECTIONS "ARG="$ARG--enable-dynamic-linking "ARG="$ARG $EXTRAPARA "CONF="./configure $ARG"echo $CONF$CONF || exit 1cd "$UNREALCWD"if [ "$CRYPTOIRCD" = "1" ] ; thenif [ ! -f server.req.pem ]; thenexport OPENSSLPATHmake pemcat .SICIread ccelseecho "SSL certificate already existing, no need to regenerate"fifi}RUN_ADVANCED () {TEST=""while [ -z "$TEST" ] ; do if [ "$SHOWLISTMODES" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Do you want to show the modes a channel has set in the /list output?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) SHOWLISTMODES="1" ;; [Nn]*) SHOWLISTMODES="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esacdoneTEST=""while [ -z "$TEST" ] ; do if [ "$TOPICNICKISNUH" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Do you want the /topic command to show the nick!user@host of the person" echo "who set the topic, rather than just the nickname?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) TOPICNICKISNUH="1" ;; [Nn]*) TOPICNICKISNUH="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esacdoneTEST=""while [ -z "$TEST" ] ; do if [ "$SHUNNOTICES" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Should Unreal notify a user when they are no longer shunned?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) SHUNNOTICES="1" ;; [Nn]*) SHUNNOTICES="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esacdoneTEST=""while [ -z "$TEST" ] ; do if [ "$NOOPEROVERRIDE" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Do you want to disable oper override?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) NOOPEROVERRIDE="1" ;; [Nn]*) NOOPEROVERRIDE="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esacdoneTEST=""while [ -z "$TEST" ] ; do if [ "$DISABLEUSERMOD" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Do you want to disable /sethost, /setident, /chgname," echo "/chghost, and /chgident?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) DISABLEUSERMOD="1" ;; [Nn]*) DISABLEUSERMOD="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esacdoneTEST=""while [ -z "$TEST" ] ; do if [ "$OPEROVERRIDEVERIFY" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Do you want to require opers to /invite themselves into a +s or +p channel?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) OPEROVERRIDEVERIFY="1" ;; [Nn]*) OPEROVERRIDEVERIFY="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esacdone}c=""n=""UNREALCWD="`pwd`"NOSPOOF=""DPATH="`pwd`"SPATH="`pwd`/src/ircd"HUB="1"DOMAINNAME=`hostname`DEFPERM="0600"CRYPTOIRCD=""SSLDIR=""ZIPLINKS=""ZIPLINKSDIR=""LISTEN_SIZE="5"NICKNAMEHISTORYLENGTH="2000"MAXSENDQLENGTH="3000000"BUFFERPOOL="18"MAXCONNECTIONS="1024"INET6=""REMOTEINC=""CURLDIR=""PREFIXAQ="1"SHOWLISTMODES="1"TOPICNICKISNUH=""SHUNNOTICES=""NOOPEROVERRIDE=""DISABLEUSERMOD=""OPEROVERRIDEVERIFY=""EXTRAPARA=""if [ "`eval echo -n 'a'`" = "-n a" ] ; then c="\c"else n="-n"fi#parse argumentsNOCACHE=""NOINTRO=""CLEAN=""ADVANCED=""while [ $# -ge 1 ] ; do if [ $1 = "--help" ] ; then echo "Config utility for UnrealIRCd" echo "-----------------------------" echo "Syntax: ./Config [options]" echo "-nocache Ignore settings saved in config.settings" echo "-nointro Skip intro (release notes, etc)" echo "-quick Skip questions, go straight to configure" echo "-advanced Include additional advanced questions" echo "-clean Clean ./configure cache" exit 0 elif [ $1 = "-nocache" ] ; then NOCACHE="1" elif [ $1 = "-nointro" ] ; then NOINTRO="1" elif [ $1 = "-quick" -o $1 = "-q" ] ; then echo "running quick config" if [ -f "config.settings" ] ; then . ./config.settings fi RUN_CONFIGURE cd "$UNREALCWD" exit 0 elif [ $1 = "-clean" -o $1 = "-C" ] ; then CLEAN="1" elif [ $1 = "-advanced" ] ; then PREADVANCED="1" fi shift 1doneif [ -f "config.settings" -a -z "$NOCACHE" ] ; then . ./config.settingsfiif [ "$PREADVANCED" = "1" ] ; then ADVANCED="1"elif [ "$ADVANCED" = "1" ]; then ADVANCED=""fiif [ -n "$CLEAN" ] ; then rm -f config.cacheficlear if [ -f ".CHANGES.NEW" -a -z "$NOINTRO" ] ; then more .CHANGES.NEW echo $n "[Enter to continue]" read cc clear fi if [ -f ".RELEASE.NOTES" -a -z "$NOINTRO" ] ; then more .RELEASE.NOTES echo $n "[Enter to continue]" read cc clear fiTEST=""while [ -z "$TEST" ] ; do if [ "$NOSPOOF" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Many older operating systems have an insecure TCP/IP stack" echo "which may be vulnerable to IP spoofing attacks, if you run" echo "an operating system that is vulnerable to such attacks" echo "enable this option. This option can also be useful to prevent" echo "blind proxies from connecting (eg: HTTP POST proxies)." echo "" echo "Do you want to enable the server anti-spoof protection?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) NOSPOOF="1" ;; [Nn]*) NOSPOOF="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esacdoneTEST="$DPATH"echo ""echo "What directory are all the server configuration files in?"echo $n "[$TEST] -> $c"read ccif [ -z "$cc" ] ; then DPATH=$TESTelse DPATH=`eval echo $cc` # modifiedfiTEST="$SPATH"echo ""echo "What is the path to the ircd binary including the name of the binary?"echo $n "[$TEST] -> $c" read ccif [ -z "$cc" ] ; then SPATH=$TESTelse SPATH=`eval echo $cc` # modifiedfiTEST=""while [ -z "$TEST" ] ; do if [ "$HUB" = "1" ] ; then TEST="Hub" else TEST="Leaf" fi echo "" echo "Would you like to compile as a hub or as a leaf?" echo "Type Hub to select hub and Leaf to select leaf." echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Hh]*) HUB="1" ;; [Ll]*) HUB="" ;; *) echo "" echo "You must enter either Hub or Leaf" TEST="" ;; esacdoneTEST="$DOMAINNAME"echo ""echo "What is the hostname of the server running your IRCd?"echo $n "[$TEST] -> $c" read ccif [ -z "$cc" ] ; then DOMAINNAME=$TESTelseDOMAINNAME=`eval echo $cc` # modifiedfiTEST=""while [ -z "$TEST" ] ; do TEST="$DEFPERM" echo "" echo "What should the default permissions for your configuration files be? (Set this to 0 to disable)" echo "It is strongly recommended that you use 0600 to prevent unwanted reading of the file" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then DEFPERM=$TEST break fi case "$cc" in [0-9]*) DEFPERM="$cc" ;; *) echo "" echo "You must enter a number" TEST="" ;; esacdoneTEST=""while [ -z "$TEST" ] ; do if [ "$CRYPTOIRCD" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Do you want to support SSL (Secure Sockets Layer) connections?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) CRYPTOIRCD="1" ;; [Nn]*) CRYPTOIRCD="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esacdoneif [ "$CRYPTOIRCD" = "1" ] ; thenTEST="$SSLDIR"echo ""echo "If you know the path to OpenSSL on your system, enter it here. If not"echo "leave this blank"echo $n "[$TEST] -> $c" read ccif [ -z "$cc" ] ; then SSLDIR="$TEST"else SSLDIR=`eval echo $cc` # modifiedfifiTEST=""while [ -z "$TEST" ] ; do if [ "$INET6" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Do you want to enable IPv6 support?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) INET6="1" ;; [Nn]*) INET6="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esacdoneTEST=""while [ -z "$TEST" ] ; do if [ "$ZIPLINKS" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Do you want to enable ziplinks support?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) ZIPLINKS="1" ;; [Nn]*) ZIPLINKS="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esacdoneif [ "$ZIPLINKS" = "1" ] ; thenTEST="$ZIPLINKSDIR"echo ""echo "If you know the path to zlib on your system, enter it here. If not"echo "leave this blank"echo $n "[$TEST] -> $c" read ccif [ -z "$cc" ] ; then ZIPLINKSDIR="$TEST"else ZIPLINKSDIR=`eval echo $cc` # modifiedfifiTEST=""while [ -z "$TEST" ] ; do if [ "$REMOTEINC" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Do you want to enable remote includes?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) REMOTEINC="1" ;; [Nn]*) REMOTEINC="" CURLDIR="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esacdoneif [ "$REMOTEINC" = "1" ] ; then TEST="" while [ -z "$TEST" ] ; do TEST="$CURLDIR" echo "" echo "Specify the directory you installed libcurl to" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST else TEST=$cc CURLDIR=`eval echo $cc` # modified fi donefiTEST=""while [ -z "$TEST" ] ; do if [ "$PREFIXAQ" = "1" ] ; then TEST="Yes" else TEST="No" fi echo "" echo "Do you want to enable prefixes for chanadmin and chanowner?" echo "This will give +a the & prefix and ~ for +q (just like +o is @)" echo "Supported by the major clients (mIRC, xchat, epic, eggdrop, Klient," echo "PJIRC, irssi, CGI:IRC, etc.)" echo "This feature should be enabled/disabled network-wide." echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then cc=$TEST fi case "$cc" in [Yy]*) PREFIXAQ="1" ;; [Nn]*) PREFIXAQ="" ;; *) echo "" echo "You must enter either Yes or No" TEST="" ;; esacdoneTEST=""while [ -z "$TEST" ] ; do TEST="$LISTEN_SIZE" echo "" echo "What listen() backlog value do you wish to use? Some older servers" echo "have problems with more than 5, others work fine with many more." echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then LISTEN_SIZE=$TEST break fi case "$cc" in [1-9]*) LISTEN_SIZE="$cc" ;; *) echo "" echo "You must enter a number" TEST="" ;; esacdoneTEST=""while [ -z "$TEST" ] ; do TEST="$NICKNAMEHISTORYLENGTH" echo "" echo "How far back do you want to keep the nickname history?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then NICKNAMEHISTORYLENGTH=$TEST break fi case "$cc" in [1-9]*) NICKNAMEHISTORYLENGTH="$cc" ;; *) echo "" echo "You must enter a number" TEST="" ;; esacdoneTEST=""while [ -z "$TEST" ] ; do TEST="$MAXSENDQLENGTH" echo "" echo "What is the maximum sendq length you wish to have?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then MAXSENDQLENGTH=$TEST break fi case "$cc" in [1-9][0-9][0-9][0-9]*) MAXSENDQLENGTH="$cc" ;; *) echo "" echo "You must enter a number greater than or equal to 1000" TEST="" ;; esacdoneTEST=""while [ -z "$TEST" ] ; do TEST="$BUFFERPOOL" echo "" echo "How many buffer pools would you like?" echo "This number will be multiplied by MAXSENDQLENGTH." echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then BUFFERPOOL=$TEST break fi case "$cc" in [1-9]*) BUFFERPOOL="$cc" ;; *) echo "" echo "You must enter a number" TEST="" ;; esacdoneecho ""TEST=""while [ -z "$TEST" ] ; do TEST="$MAXCONNECTIONS" echo "" echo "How many file descriptors (or sockets) can the IRCd use?" echo $n "[$TEST] -> $c" read cc if [ -z "$cc" ] ; then MAXCONNECTIONS=$TEST break fi case "$cc" in [1-9][0-9][0-9]*) MAXCONNECTIONS="$cc" ;; *) echo "" echo "You must to enter a number greater than or equal to 100" TEST="" ;; esacdoneif [ -n "$ADVANCED" ] ; then RUN_ADVANCEDfiecho ""echo "Would you like any more parameters to configure?"echo "Write them here:"echo $n "[]-> $c"read EXTRAPARArm -f config.settingscat > config.settings << __EOF__#NOSPOOF="$NOSPOOF"DPATH="$DPATH"SPATH="$SPATH"INET6="$INET6"PREFIXAQ="$PREFIXAQ"LISTEN_SIZE="$LISTEN_SIZE"MAXSENDQLENGTH="$MAXSENDQLENGTH"BUFFERPOOL="$BUFFERPOOL"MAXCONNECTIONS="$MAXCONNECTIONS"NICKNAMEHISTORYLENGTH="$NICKNAMEHISTORYLENGTH"HUB="$HUB"DOMAINNAME="$DOMAINNAME"DEFPERM="$DEFPERM"CRYPTOIRCD="$CRYPTOIRCD"SSLDIR="$SSLDIR"ZIPLINKS="$ZIPLINKS"ZIPLINKSDIR="$ZIPLINKSDIR"REMOTEINC="$REMOTEINC"CURLDIR="$CURLDIR"SHOWLISTMODES="$SHOWLISTMODES"TOPICNICKISNUH="$TOPICNICKISNUH"SHUNNOTICES="$SHUNNOTICES"NOOPEROVERRIDE="$NOOPEROVERRIDE"DISABLEUSERMOD="$DISABLEUSERMOD"OPEROVERRIDEVERIFY="$OPEROVERRIDEVERIFY"EXTRAPARA="$EXTRAPARA"ADVANCED="$ADVANCED"__EOF__RUN_CONFIGUREcd "$UNREALCWD"cat << __EOF__ _______________________________________________________________________| || UnrealIRCd Compile-Time Config ||_______________________________________________________________________||_______________________________________________________________________|| || Now all you have to do is type 'make' and let it compile. When that's || done, you will receive other instructions on what to do next. || ||_______________________________________________________________________||_______________________________________________________________________|| - The UnrealIRCd Team - || || * Stskeeps stskeeps@unrealircd.com || * codemastr codemastr@unrealircd.com || * Syzop syzop@unrealircd.com ||_______________________________________________________________________|__EOF__