AT+CIND Indicator Control (ver. 4)
Description: This command sets the values of phone indicators. <ind> value 0 means
that the indicator is off (or in state which can be identified as “off”-state), 1
means that indicator is on (or in a state which is more substantial than
“off”-state), 2 is more substantial than 1, and so on. If the indicator is a
simple on/off style element, it has values 0 and 1. The number of elements
is phone specific. If the phone does not allow setting of indicators or
phone is not currently reachable, +CME ERROR: <err> is returned. If a
certain indicator is not writable, setting of it should be ignored. If
parameter is empty field, indicator shall remain in the previous value.
Test command returns pairs, where string value <descr> is a maximum 16
character description of the indicator and compound value is the allowed
values for the indicator. If phone is not currently reachable, +CME ERROR:
<err> is returned.
Set command: AT+CIND=[<ind>[,<ind>[,...]]]
Read command: AT+CIND? Displays the current [<ind>[,<ind>[,...]]] settings.
Test command: AT+CIND=? Shows if the command is supported.
Test command +CIND: (<descr>,(list of supported <ind>s)),(<descr>,(list of supported
response: <ind>s)),...
Parameters:
<ind>:
<ind> Description
Integer type Value shall be in range of corresponding <descr>.
<descr>:
<descr> Description
“battchg” Battery charge level (0-5)
“signal” Signal quality (0-5)
“batterywarning” Battery warning (0-1)
“chargerconnected” Charger connected (0-1)
“service” Service availability (0-1) (Net contact status, 1 = Net
contact)
137 August 2005
Developers Guideline AT Commands
<descr> Description
“sounder” Sounder activity (0-1) (Phone silent status, 1 =
phone silent)
“message” Message received (0-1)
“call” Call in progress (0-1)
“roam” Roaming indicator (0-1) (Home net status, 0 =
Home Net)
“smsfull” 1: a short message memory storage in the MT has
become full
0: Memory locations are available
“callsetup” Bluetooth proprietary call set up status indicator.
Possible values are as follows:
0: Not currently in call set up
1: Incoming call process ongoing
2: Outgoing call set up is ongoing
3: Remote party being alerted in an outgoing call
Example: AT+CIND?
+CIND: 2,3,1,1,1,1,1,0,0,1
OK
AT+CIND=?
+CIND: (“battchg”,(0-1)),(“signal”,(0-5)),
(“batterywarning”,(0-1)),(“chargerconnected”,(0-1)),
(“service”,(0-1)),(“sounder”,(0-1)),(“message”,(0-1)),
(“call”,(0-1)),(“roam”,(0-1)),(“smsfull”,(0-1))