rendered paste bodyLinux version 2.6.17-16mdv (qateam@mercury.mandriva.com) (gcc version 4.1.2 20070302 (prerelease) (4.1.2-1mdv2007.1)) #1 SMP Wed Sep 26 16:10:48 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bfef000 (usable)
BIOS-e820: 000000003bff0000 - 000000003bffffc0 (ACPI data)
BIOS-e820: 000000003bffffc0 - 000000003c000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
63MB HIGHMEM available.
895MB LOWMEM available.
On node 0 totalpages: 245743
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225279 pages, LIFO batch:31
HighMem zone: 16368 pages, LIFO batch:3
DMI 2.3 present.
ACPI: RSDP (v000 OID_00 ) @ 0x000e6010
ACPI: RSDT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x3bffc2d0
ACPI: FADT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x3bfffb00
ACPI: MADT (v001 INSYDE APIC_000 0x30303030 0000 0x00010200) @ 0x3bfffb90
ACPI: DSDT (v001 INSYDE PN800 0x00001000 INTL 0x02002036) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:13 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3c000000:c3f80000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=2.6.17-16 root=/dev/hda1 poll resume=/dev/hda5 splash=silent pci=irqpoll vga=788
bootsplash: silent mode.
PCI: Unknown option `irqpoll'
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1592.403 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 968708k/982972k available (2430k kernel code, 13148k reserved, 760k data, 244k init, 65472k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3188.84 BogoMIPS (lpj=6377682)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
checking if image is initramfs... it is
Freeing initrd memory: 733k freed
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel(R) Celeron(R) M processor 1.60GHz stepping 08
Total of 1 processors activated (3188.84 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe9b04, last bus=1
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 1000-107f claimed by vt8235 PM
PCI quirk: region 1400-140f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC0] (gpe 1) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 23) *11
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
ACPI Error (uteval-0215): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node f7fe3e00), AE_TYPE
ACPI Error (uteval-0221): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20060127]
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:06.0
pnp: 00:07: ioport range 0x330-0x331 has been reserved
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:07: ioport range 0x1000-0x107f could not be reserved
pnp: 00:07: ioport range 0x1400-0x140f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: c000-dfff
MEM window: c0000000-cfffffff
PREFETCH window: 90000000-9fffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1193517370.496:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0x90000000, mapped to 0xf8880000, using 3750k, total 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=63
vesafb: protected mode interface info at c000:a81f
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 197324 bytes,<6>...found (800x600, 197276 bytes, v3).
Console: switching to colour frame buffer device 93x31
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug.
ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST980811A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Slimtype DVDRW SOSW-833S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 >
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI wakeup devices:
SBTN LAN AC97 MC97 KBC
ACPI: (supports S0 S1 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 244k freed
input: AT Translated Set 2 keyboard as /class/input/input0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b3, caps: 0xa04713/0x200000
input: SynPS/2 Synaptics TouchPad as /class/input/input1
ts: Compaq touchscreen protocol output
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI Error (uteval-0215): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node f7fe3e00), AE_TYPE
ACPI Error (uteval-0221): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20060127]
ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI - using IRQ 11
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI Error (uteval-0215): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node f7fe3e00), AE_TYPE
ACPI Error (uteval-0221): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20060127]
ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI Interrupt 0000:00:10.1[B]: no GSI - using IRQ 7
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI Error (uteval-0215): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node f7fe3e00), AE_TYPE
ACPI Error (uteval-0221): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20060127]
ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI Interrupt 0000:00:10.2[C]: no GSI - using IRQ 5
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:10.3 (0000 -> 0002)
ACPI Error (uteval-0215): Return object type is incorrect [\_SB_.PCI0.ALKD._CRS] (Node f7fe3e00), AE_TYPE
ACPI Error (uteval-0221): Type returned from _CRS was incorrect: Integer, expected Btypes: 4 [20060127]
ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS).
Try pci=noacpi or acpi=off
ACPI: PCI Interrupt 0000:00:10.3[D]: no GSI - using IRQ 10
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: irq 10, io mem 0x40008000
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
agpgart: AGP aperture is 32M @ 0xa0000000
floppy0: no floppy controllers found
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
EXT3 FS on hda1, internal journal
Adding 4088500k swap on /dev/hda5. Priority:-1 extents:1 across:4088500k
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: loaded (max 8 devices, max 1 partitions per device)
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 197324 bytes,<6>...found (800x600, 197276 bytes, v3).
bootsplash: status on console 0 changed to on
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SBTN]
Using specific hotkey driver
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 16 throttling states)
ACPI: Thermal Zone [TZ0] (0 C)
ACPI: Video Device [VGA0_AGPB] (multi-head: yes rom: no post: no)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug.
ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 5, using IRQ 22
ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:11.5 to 64
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 11, using IRQ 23
ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKB] -> GSI 23 (level, low) -> IRQ 18
eth0: VIA Rhine II at 0x1e200, 00:40:d0:97:a2:45, IRQ 18.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Initialized drm 1.0.1 20051102
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14222 bytes, v3).
bootsplash: status on console 5 changed to on
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[drm] Initialized via 2.7.4 20051116 on minor 0
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 0x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 0x mode
usb 4-3: new high speed USB device using ehci_hcd and address 2
ehci_hcd 0000:00:10.3: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
usb 4-3: device not accepting address 2, error -110
usb 4-3: new high speed USB device using ehci_hcd and address 3
usb 4-3: device not accepting address 3, error -110
usb 4-3: new high speed USB device using ehci_hcd and address 4
usb 4-3: device not accepting address 4, error -110
usb 4-3: new high speed USB device using ehci_hcd and address 5
usb 4-3: device not accepting address 5, error -110