rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffe2800 (usable)
[ 0.000000] BIOS-e820: 000000003ffe2800 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262114) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262114
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262114
[ 0.000000] On node 0 totalpages: 262114
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32483 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FDE50 checksum 0
[ 0.000000] ACPI: RSDP 000FDE50, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 000FDE64, 0028 (r1 DELL CPi R 27D40107 ASL 61)
[ 0.000000] ACPI: FACP 000FDE90, 0074 (r1 DELL CPi R 27D40107 ASL 61)
[ 0.000000] ACPI: DSDT FFFE4000, 314E (r1 INT430 SYSFexxx 1001 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FFFF800, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:beda0000)
[ 0.000000] Built 1 zonelists. Total pages: 260067
[ 0.000000] Kernel command line: root=UUID=62417555-31a4-4c1e-8f35-4a8263b073d0 ro
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0180e000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1196.508 MHz processor.
[ 17.472559] Console: colour VGA+ 80x25
[ 17.475284] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 17.476365] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 17.545927] Memory: 1027568k/1048456k available (2015k kernel code, 20204k reserved, 916k data, 364k init, 130952k highmem)
[ 17.546039] virtual kernel memory layout:
[ 17.546042] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 17.546044] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 17.546047] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 17.546049] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 17.546051] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 17.546054] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 17.546056] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 17.546527] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 17.546729] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 17.626767] Calibrating delay using timer specific routine.. 2396.25 BogoMIPS (lpj=4792505)
[ 17.626939] Security Framework v1.0.0 initialized
[ 17.627013] SELinux: Disabled at boot.
[ 17.627097] Mount-cache hash table entries: 512
[ 17.627471] CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 17.627499] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 17.627601] CPU: L2 cache: 512K
[ 17.627663] CPU: Hyper-Threading is disabled
[ 17.627727] CPU: After all inits, caps: 3febf9ff 00000000 00000000 0000b080 00000000 00000000 00000000
[ 17.627757] Compat vDSO mapped to ffffe000.
[ 17.627844] Checking 'hlt' instruction... OK.
[ 17.643130] SMP alternatives: switching to UP code
[ 17.643651] Freeing SMP alternatives: 11k freed
[ 17.644399] Early unpacking initramfs... done
[ 18.380264] ACPI: Core revision 20070126
[ 18.398426] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 18.436527] ACPI: setting ELCR to 0200 (from 0800)
[ 18.439349] CPU0: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz stepping 04
[ 18.439489] SMP motherboard not detected.
[ 18.439548] Local APIC not detected. Using dummy APIC emulation.
[ 18.439682] Brought up 1 CPUs
[ 18.439989] Booting paravirtualized kernel on bare hardware
[ 18.440141] Time: 22:10:14 Date: 09/25/107
[ 18.440240] NET: Registered protocol family 16
[ 18.440475] EISA bus registered
[ 18.440550] ACPI: bus type pci registered
[ 18.467956] PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
[ 18.468021] PCI: Using configuration type 1
[ 18.468080] Setting up standard PCI resources
[ 18.472950] ACPI: EC: Look up EC in DSDT
[ 18.506922] ACPI: Interpreter enabled
[ 18.506991] ACPI: (supports S0 S1 S3 S4 S5)
[ 18.507303] ACPI: Using PIC for interrupt routing
[ 18.564860] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.564963] PCI: Probing PCI hardware (bus 00)
[ 18.565482] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 18.565550] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
[ 18.566454] PCI: Transparent bridge - 0000:00:1e.0
[ 18.566756] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.566941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 18.566974] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 18.627513] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 18.628268] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
[ 18.629014] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[ 18.629766] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
[ 18.630422] ACPI: Power Resource [PADA] (on)
[ 18.630499] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 18.630580] pnp: PnP ACPI init
[ 18.630662] ACPI: bus type pnp registered
[ 18.806291] pnp: PnP ACPI: found 17 devices
[ 18.806357] ACPI: ACPI bus type pnp unregistered
[ 18.806424] PnPBIOS: Disabled by ACPI PNP
[ 18.806593] PCI: Using ACPI for IRQ routing
[ 18.806656] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 18.816806] PCI: Device 0000:02:03.0 not found by BIOS
[ 18.816918] NET: Registered protocol family 8
[ 18.816979] NET: Registered protocol family 20
[ 18.817184] pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 18.817251] pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 18.817316] pnp: 00:00: iomem range 0xc0000-0xcffff could not be reserved
[ 18.817382] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 18.817457] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 18.817521] pnp: 00:02: ioport range 0x800-0x805 has been reserved
[ 18.817586] pnp: 00:02: ioport range 0x808-0x80f has been reserved
[ 18.817657] Time: tsc clocksource has been installed.
[ 18.817733] pnp: 00:03: ioport range 0x806-0x807 has been reserved
[ 18.817797] pnp: 00:03: ioport range 0x810-0x85f has been reserved
[ 18.817861] pnp: 00:03: ioport range 0x860-0x87f has been reserved
[ 18.817926] pnp: 00:03: ioport range 0x880-0x8bf has been reserved
[ 18.817990] pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
[ 18.818054] pnp: 00:03: ioport range 0x8e0-0x8ff has been reserved
[ 18.818127] pnp: 00:04: ioport range 0xf000-0xf0fe has been reserved
[ 18.818193] pnp: 00:04: ioport range 0xf100-0xf1fe has been reserved
[ 18.818257] pnp: 00:04: ioport range 0xf200-0xf2fe has been reserved
[ 18.818322] pnp: 00:04: ioport range 0xf400-0xf4fe has been reserved
[ 18.818387] pnp: 00:04: ioport range 0xf500-0xf5fe has been reserved
[ 18.818451] pnp: 00:04: ioport range 0xf600-0xf6fe has been reserved
[ 18.818518] pnp: 00:04: ioport range 0xf800-0xf8fe has been reserved
[ 18.818582] pnp: 00:04: ioport range 0xf900-0xf9fe has been reserved
[ 18.818647] pnp: 00:04: iomem range 0xfa000000-0xfbffffff has been reserved
[ 18.818724] pnp: 00:09: ioport range 0x900-0x91f has been reserved
[ 18.818788] pnp: 00:09: ioport range 0x3f0-0x3f1 has been reserved
[ 18.818864] pnp: 00:0f: ioport range 0xbf40-0xbf5f has been reserved
[ 18.818936] pnp: 00:10: iomem range 0xfebffc00-0xfebfffff has been reserved
[ 18.849699] PCI: Bridge: 0000:00:01.0
[ 18.849761] IO window: c000-cfff
[ 18.849825] MEM window: fc000000-fdffffff
[ 18.849887] PREFETCH window: d8000000-e7ffffff
[ 18.849971] PCI: Bus 3, cardbus bridge: 0000:02:01.0
[ 18.850032] IO window: 0000e000-0000e0ff
[ 18.850095] IO window: 0000e400-0000e4ff
[ 18.850160] PREFETCH window: 50000000-53ffffff
[ 18.850224] MEM window: f4000000-f7ffffff
[ 18.850287] PCI: Bus 7, cardbus bridge: 0000:02:01.1
[ 18.850347] IO window: 0000e800-0000e8ff
[ 18.850410] IO window: 0000fc00-0000fcff
[ 18.850473] PREFETCH window: 54000000-57ffffff
[ 18.850536] MEM window: 5c000000-5fffffff
[ 18.850599] PCI: Bridge: 0000:00:1e.0
[ 18.850659] IO window: e000-ffff
[ 18.850723] MEM window: f4000000-fbffffff
[ 18.850786] PREFETCH window: 50000000-59ffffff
[ 18.850871] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 18.850895] PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
[ 18.851667] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 18.851733] PCI: setting IRQ 11 as level-triggered
[ 18.851739] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 18.851917] PCI: Enabling device 0000:02:01.1 (0000 -> 0003)
[ 18.851982] ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 18.852161] NET: Registered protocol family 2
[ 18.889654] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 18.889967] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 18.892490] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 18.893501] TCP: Hash tables configured (established 131072 bind 65536)
[ 18.893618] TCP reno registered
[ 18.905926] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[ 19.603991] it is
[ 20.361306] Freeing initrd memory: 7333k freed
[ 20.364349] audit: initializing netlink socket (disabled)
[ 20.364434] audit(1193350215.776:1): initialized
[ 20.364672] highmem bounce pool size: 64 pages
[ 20.369401] VFS: Disk quotas dquot_6.5.1
[ 20.369579] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 20.369843] io scheduler noop registered
[ 20.369905] io scheduler anticipatory registered
[ 20.369965] io scheduler deadline registered
[ 20.370057] io scheduler cfq registered (default)
[ 20.370180] Boot video device is 0000:01:00.0
[ 20.370512] isapnp: Scanning for PnP cards...
[ 20.724316] isapnp: No Plug & Play device found
[ 20.778603] Real Time Clock Driver v1.12ac
[ 20.778872] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 20.779203] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.780830] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.782467] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.783007] input: Macintosh mouse button emulation as /class/input/input0
[ 20.783269] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 20.792905] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.792981] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.793442] mice: PS/2 mouse device common for all mice
[ 20.793745] EISA: Probing bus 0 at eisa.0
[ 20.793844] EISA: Detected 0 cards.
[ 20.794111] TCP cubic registered
[ 20.794191] NET: Registered protocol family 1
[ 20.794305] Using IPI No-Shortcut mode
[ 20.794688] Magic number: 11:853:199
[ 20.795852] hash matches device ttype
[ 20.796686] Freeing unused kernel memory: 364k freed
[ 20.831681] input: AT Translated Set 2 keyboard as /class/input/input1
[ 21.255539] AppArmor: AppArmor initialized<5>audit(1193350216.276:2): type=1505 info="AppArmor initialized" pid=1182
[ 21.271595] fuse init (API version 7.8)
[ 21.283361] Failure registering capabilities with primary security module.
[ 21.321533] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 21.321713] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 21.341287] ACPI: Thermal Zone [THM] (58 C)
[ 22.723587] usbcore: registered new interface driver usbfs
[ 22.723705] usbcore: registered new interface driver hub
[ 22.723816] usbcore: registered new device driver usb
[ 22.726005] USB Universal Host Controller Interface driver v3.0
[ 22.726920] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 22.726985] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 22.727154] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 22.727162] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 22.727466] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 22.727583] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[ 22.727891] usb usb1: configuration #1 chosen from 1 choice
[ 22.728019] hub 1-0:1.0: USB hub found
[ 22.728093] hub 1-0:1.0: 2 ports detected
[ 22.826184] SCSI subsystem initialized
[ 22.840317] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 22.840390] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 22.840559] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 22.840567] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 22.840678] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 2
[ 22.840791] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
[ 22.841052] usb usb2: configuration #1 chosen from 1 choice
[ 22.841178] hub 2-0:1.0: USB hub found
[ 22.841252] hub 2-0:1.0: 2 ports detected
[ 22.841578] libata version 2.21 loaded.
[ 22.958374] ata_piix 0000:00:1f.1: version 2.11
[ 22.958403] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 22.958483] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 22.958704] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 22.958834] scsi0 : ata_piix
[ 22.958988] scsi1 : ata_piix
[ 22.961623] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
[ 22.961709] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
[ 23.289445] ata1.00: ATA-5: TOSHIBA MK4019GAX, FA002D, max UDMA/100
[ 23.289520] ata1.00: 78140160 sectors, multi 8: LBA
[ 23.289588] ata1.01: ATAPI: HL-DT-STDVD-ROM GDR8081N, 0108, max MWDMA2
[ 23.297484] ata1.00: configured for UDMA/100
[ 23.364279] Floppy drive(s): fd0 is 1.44M
[ 23.418854] FDC 0 is a post-1991 82077
[ 23.469171] ata1.01: configured for MWDMA2
[ 23.625023] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4019GA FA00 PQ: 0 ANSI: 5
[ 23.631761] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8081N 0108 PQ: 0 ANSI: 5
[ 23.632185] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 23.632349] 3c59x: Donald Becker and others.
[ 23.632414] 0000:02:00.0: 3Com PCI 3c905C Tornado at f8814c00.
[ 23.654611] ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 23.706128] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f8fff000-f8fff7ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 23.740685] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 23.741421] sd 0:0:0:0: [sda] Write Protect is off
[ 23.741489] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.741540] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.741748] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 23.741835] sd 0:0:0:0: [sda] Write Protect is off
[ 23.741899] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.741941] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.742028] sda:Marking TSC unstable due to: possible TSC halt in C2.
[ 6.228000] Time: acpi_pm clocksource has been installed.
[ 6.280000] sda1 sda2 sda3
[ 6.296000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.308000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.308000] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 6.340000] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
[ 6.340000] Uniform CD-ROM driver Revision: 3.20
[ 6.340000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 6.692000] Attempting manual resume
[ 6.692000] swsusp: Resume From Partition 8:2
[ 6.692000] PM: Checking swsusp image.
[ 6.692000] PM: Resume from disk failed.
[ 6.720000] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[ 6.724000] ReiserFS: sda3: using ordered data mode
[ 6.728000] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 6.732000] ReiserFS: sda3: checking transaction log (sda3)
[ 6.772000] ReiserFS: sda3: Using r5 hash to sort names
[ 7.440000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[394fc000362ad421]
[ 16.488000] eth0: setting half-duplex.
[ 17.692000] NET: Registered protocol family 10
[ 17.692000] lo: Disabled Privacy Extensions
[ 17.692000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.580000] Linux agpgart interface v0.102 (c) Dave Jones
[ 19.600000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.604000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.608000] agpgart: Detected an Intel 845G Chipset.
[ 19.616000] agpgart: AGP aperture is 64M @ 0xe8000000
[ 19.716000] Intel 82802 RNG detected
[ 19.748000] iTCO_vendor_support: vendor-support=0
[ 19.760000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 19.760000] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x0860)
[ 19.760000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 20.980000] Yenta: CardBus bridge found at 0000:02:01.0 [1028:00d4]
[ 20.980000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 20.980000] Yenta: Routing CardBus interrupts to PCI
[ 20.980000] Yenta TI: socket 0000:02:01.0, mfunc 0x05033002, devctl 0x64
[ 21.212000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[ 21.212000] Socket status: 30000006
[ 21.212000] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
[ 21.212000] cs: IO port probe 0xe000-0xffff: clean.
[ 21.212000] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
[ 21.212000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x59ffffff
[ 21.212000] Yenta: CardBus bridge found at 0000:02:01.1 [1028:00d4]
[ 21.212000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 21.212000] Yenta: Routing CardBus interrupts to PCI
[ 21.212000] Yenta TI: socket 0000:02:01.1, mfunc 0x05033002, devctl 0x64
[ 21.444000] Yenta: ISA IRQ mask 0x04b8, PCI irq 11
[ 21.444000] Socket status: 30000010
[ 21.444000] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
[ 21.444000] cs: IO port probe 0xe000-0xffff: clean.
[ 21.444000] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
[ 21.444000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x59ffffff
[ 22.080000] pccard: PCMCIA card inserted into slot 1
[ 22.204000] input: DualPoint Stick as /class/input/input2
[ 22.224000] input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input3
[ 22.228000] parport_pc 00:0e: reported by Plug and Play ACPI
[ 22.228000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 22.232000] input: PC Speaker as /class/input/input4
[ 22.768000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 22.768000] PCI: setting IRQ 5 as level-triggered
[ 22.768000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 22.768000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 22.916000] cs: memory probe 0xf4000000-0xfbffffff: excluding 0xf4000000-0xf8ffffff 0xfa000000-0xfbffffff
[ 22.916000] pcmcia: registering new device pcmcia1.0
[ 23.036000] cs: IO port probe 0x100-0x3af: clean.
[ 23.036000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 23.036000] cs: IO port probe 0x820-0x8ff: clean.
[ 23.040000] cs: IO port probe 0xc00-0xcf7: clean.
[ 23.040000] cs: IO port probe 0xa00-0xaff: clean.
[ 23.068000] cs: IO port probe 0x100-0x3af: clean.
[ 23.072000] cs: IO port probe 0x3e0-0x4ff: clean.
[ 23.072000] cs: IO port probe 0x820-0x8ff: clean.
[ 23.072000] cs: IO port probe 0xc00-0xcf7: clean.
[ 23.072000] cs: IO port probe 0xa00-0xaff: clean.
[ 23.092000] intel8x0_measure_ac97_clock: measured 54896 usecs
[ 23.092000] intel8x0: clocking to 48000
[ 23.272000] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 23.276000] orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 23.360000] eth1: Hardware identity 0001:0001:0004:0002
[ 23.360000] eth1: Station identity 001f:0001:0007:001c
[ 23.360000] eth1: Firmware determined as Lucent/Agere 7.28
[ 23.360000] eth1: Ad-hoc demo mode supported
[ 23.360000] eth1: IEEE standard IBSS ad-hoc mode supported
[ 23.360000] eth1: WEP supported, 104-bit key
[ 23.360000] eth1: MAC address 00:02:2D:A5:8C:AB
[ 23.360000] eth1: Station name "HERMES I"
[ 23.360000] eth1: ready
[ 23.360000] eth1: orinoco_cs at 1.0, irq 3, io 0xe100-0xe13f
[ 24.000000] lp0: using parport0 (interrupt-driven).
[ 24.100000] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k
[ 38.840000] ACPI: AC Adapter [AC] (off-line)
[ 38.888000] ACPI: ACPI Dock Station Driver
[ 38.988000] input: Lid Switch as /class/input/input5
[ 38.988000] ACPI: Lid Switch [LID]
[ 38.992000] input: Power Button (CM) as /class/input/input6
[ 38.992000] ACPI: Power Button (CM) [PBTN]
[ 38.992000] input: Sleep Button (CM) as /class/input/input7
[ 38.992000] ACPI: Sleep Button (CM) [SBTN]
[ 39.776000] ACPI: Battery Slot [BAT0] (battery present)
[ 39.900000] ACPI: Battery Slot [BAT1] (battery present)
[ 39.936000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 40.808000] Clocksource tsc unstable (delta = 97365258 ns)
[ 42.252000] ppdev: user-space parallel port driver
[ 42.372000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 42.436000] eth1: New link status: Disconnected (0002)
[ 42.500000] audit(1193350255.463:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4938 profile="/usr/sbin/cupsd"
[ 42.604000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 42.604000] apm: overridden by ACPI.
[ 43.588000] Failure registering capabilities with primary security module.
[ 43.836000] Bluetooth: Core ver 2.11
[ 43.840000] NET: Registered protocol family 31
[ 43.840000] Bluetooth: HCI device and connection manager initialized
[ 43.840000] Bluetooth: HCI socket layer initialized
[ 43.872000] Bluetooth: L2CAP ver 2.8
[ 43.872000] Bluetooth: L2CAP socket layer initialized
[ 43.912000] Bluetooth: RFCOMM socket layer initialized
[ 43.912000] Bluetooth: RFCOMM TTY layer initialized
[ 43.912000] Bluetooth: RFCOMM ver 1.8
[ 279.484000] eth0: setting full-duplex.
[ 279.488000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 289.676000] eth0: no IPv6 routers present
[ 7740.148000] ath_hal: module license 'Proprietary' taints kernel.
[ 7740.152000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 7740.276000] wlan: 0.8.4.2 (0.9.3.3)
[ 7740.324000] ath_pci: 0.9.4.5 (0.9.3.3)