rendered paste body
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
* Stopping local ... [ ok ]
* Saving random seed ... [ ok ]
* Stopping sshd ... [ ok ]
* Unmounting network filesystems ... [ ok ]
* Stopping portmap ... [ ok ]
* Stopping eth0
* Bringing down eth0
* Shutting down eth0 ... [ ok ]
* Stopping lo
* Bringing down lo
* Shutting down lo ... [ ok ]
* Deactivating swap ... [ ok ]
* Unmounting filesystems ... [ ok ]
* Remounting remaining filesystems readonly ... [ ok ]
Restarting system.
LinuxBIOS-2.0.0.0Fallback Thu Oct 25 21:42:44 CEST 2007 starting...
SMBus controller enabled
Ram1.00
Northbridge prior to SDRAM init:
PCI: 00:00.00
00: 86 80 90 71 06 00 10 22 03 00 00 06 00 40 00 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 0c 82 00 ff 00 00 00 09 03 30 33 33 33 33 33 33
60: 08 08 08 08 08 08 08 08 00 03 00 00 00 00 00 00
70: 00 1f 02 38 01 00 03 00 23 01 10 38 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 80 00 00 00 04 61 00 00 00 05 00 00 00 00 00 00
a0: 02 00 10 00 03 02 00 1f 00 00 00 00 00 00 00 00
b0: 80 20 00 00 00 00 00 00 00 00 3c 01 00 00 00 00
c0: 00 00 00 00 00 00 00 00 18 0c 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 f8 00 00 20 0f 00 00 00 00 00 00
Set register 0x50 to 0x0c
Set register 0x51 to 0x80
Set register 0x52 to 0x00
Set register 0x53 to 0xff
Set register 0x57 to 0x08
Set register 0x59 to 0x00
Set register 0x5a to 0x00
Set register 0x5b to 0x00
Set register 0x5c to 0x00
Set register 0x5d to 0x00
Set register 0x5e to 0x00
Set register 0x5f to 0x00
Set register 0x60 to 0x00
Set register 0x61 to 0x00
Set register 0x62 to 0x00
Set register 0x63 to 0x00
Set register 0x64 to 0x00
Set register 0x65 to 0x00
Set register 0x66 to 0x00
Set register 0x67 to 0x00
Set register 0x68 to 0x00
Set register 0x74 to 0x00
Set register 0x75 to 0x00
Set register 0x76 to 0x00
Set register 0x76 to 0x00
Set register 0x78 to 0x00
Set register 0x79 to 0xff
Set register 0x7a to 0x00
Ram2.00
Ram3
RAM Enable 1: Apply NOP
Sending RAM command 0x0023 to 0x00000000
RAM Enable 2: Precharge all
Sending RAM command 0x0043 to 0x00000000
RAM Enable 3: CBR
Sending RAM command 0x0083 to 0x00000000
Sending RAM command 0x0083 to 0x00000000
Sending RAM command 0x0083 to 0x00000000
Sending RAM command 0x0083 to 0x00000000
Sending RAM command 0x0083 to 0x00000000
Sending RAM command 0x0083 to 0x00000000
Sending RAM command 0x0083 to 0x00000000
Sending RAM command 0x0083 to 0x00000000
RAM Enable 4: Mode register set
Sending RAM command 0x0063 to 0x000001d0
RAM Enable 5: Normal operation
Sending RAM command 0x0003 to 0x00000000
RAM Enable 6: Enable refresh
Enabling refresh (DRAMC = 0x09) for DIMM 00
Enabling refresh (DRAMC = 0x09) for DIMM 01
Northbridge following SDRAM init:
PCI: 00:00.00
00: 86 80 90 71 06 00 10 22 03 00 00 06 00 40 00 00
10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 0c 80 00 ff 00 00 00 09 03 30 33 33 33 33 33 33
60: 08 08 08 08 08 08 08 08 00 03 00 00 00 00 00 00
70: 00 1f 02 38 01 00 03 00 23 01 10 38 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 80 00 00 00 04 61 00 00 00 05 00 00 00 00 00 00
a0: 02 00 10 00 03 02 00 1f 00 00 00 00 00 00 00 00
b0: 80 20 00 00 00 00 00 00 00 00 3c 01 00 00 00 00
c0: 00 00 00 00 00 00 00 00 18 0c 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 f8 00 00 20 0f 00 00 00 00 00 00
Ram4
Copying LinuxBIOS to RAM.
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0.0Fallback Thu Oct 25 21:42:44 CEST 2007 booting...
end c8b28bab, start 19a
32-bit delta 1534
calibrate_tsc 32-bit result is 1534
clocks_per_usec: 1534
KBC I/O: e8Enumerating buses...
scan_static_bus for Root Device
APIC_CLUSTER: 0 enabled
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
PCI_DOMAIN: 0000 scanning...
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [8086/7190] ops
PCI: 00:00.0 [8086/7190] enabled
PCI: 00:01.0 [8086/7191] enabled
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: devfn 0x48, bad id 0xffffffff
Disabling static device: PCI: 00:0a.0
PCI: devfn 0x51, bad id 0xffffffff
PCI: devfn 0x52, bad id 0xffffffff
PCI: devfn 0x53, bad id 0xffffffff
PCI: devfn 0x54, bad id 0xffffffff
PCI: devfn 0x55, bad id 0xffffffff
PCI: devfn 0x56, bad id 0xffffffff
PCI: devfn 0x57, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
malloc Enter, size 668, free_mem_ptr 00024000
malloc 0x00024000
PCI: 00:0d.0 [10ec/8139] enabled
PCI: devfn 0x70, bad id 0xffffffff
PCI: devfn 0x78, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: devfn 0x88, bad id 0xffffffff
PCI: devfn 0x90, bad id 0xffffffff
PCI: devfn 0x98, bad id 0xffffffff
PCI: 00:14.0 [8086/7110] bus ops
PCI: 00:14.0 [8086/7110] enabled
PCI: 00:14.1 [8086/7111] ops
PCI: 00:14.1 [8086/7111] enabled
PCI: 00:14.2 [8086/7112] ops
PCI: 00:14.2 [8086/7112] enabled
PCI: 00:14.3 [8086/7113] bus ops
PCI: 00:14.3 [8086/7113] enabled
PCI: devfn 0xa4, bad id 0xffffffff
PCI: devfn 0xa5, bad id 0xffffffff
PCI: devfn 0xa6, bad id 0xffffffff
PCI: devfn 0xa7, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
do_pci_scan_bridge for PCI: 00:01.0
PCI: pci_scan_bus for bus 01
malloc Enter, size 668, free_mem_ptr 0002429c
malloc 0x0002429c
PCI: 01:00.0 [1002/4742] enabled
PCI: devfn 0x8, bad id 0xffffffff
PCI: devfn 0x10, bad id 0xffffffff
PCI: devfn 0x18, bad id 0xffffffff
PCI: devfn 0x20, bad id 0xffffffff
PCI: devfn 0x28, bad id 0xffffffff
PCI: devfn 0x30, bad id 0xffffffff
PCI: devfn 0x38, bad id 0xffffffff
PCI: devfn 0x40, bad id 0xffffffff
PCI: devfn 0x48, bad id 0xffffffff
PCI: devfn 0x50, bad id 0xffffffff
PCI: devfn 0x58, bad id 0xffffffff
PCI: devfn 0x60, bad id 0xffffffff
PCI: devfn 0x68, bad id 0xffffffff
PCI: devfn 0x70, bad id 0xffffffff
PCI: devfn 0x78, bad id 0xffffffff
PCI: devfn 0x80, bad id 0xffffffff
PCI: devfn 0x88, bad id 0xffffffff
PCI: devfn 0x90, bad id 0xffffffff
PCI: devfn 0x98, bad id 0xffffffff
PCI: devfn 0xa0, bad id 0xffffffff
PCI: devfn 0xa8, bad id 0xffffffff
PCI: devfn 0xb0, bad id 0xffffffff
PCI: devfn 0xb8, bad id 0xffffffff
PCI: devfn 0xc0, bad id 0xffffffff
PCI: devfn 0xc8, bad id 0xffffffff
PCI: devfn 0xd0, bad id 0xffffffff
PCI: devfn 0xd8, bad id 0xffffffff
PCI: devfn 0xe0, bad id 0xffffffff
PCI: devfn 0xe8, bad id 0xffffffff
PCI: devfn 0xf0, bad id 0xffffffff
PCI: devfn 0xf8, bad id 0xffffffff
PCI: pci_scan_bus returning with max=001
do_pci_scan_bridge returns max 1
scan_static_bus for PCI: 00:14.0
SIO en_dev
pnp enable devices
PNP: 015c.0 enabled
SIO en_dev
pnp enable devices
PNP: 015c.1 enabled
SIO en_dev
pnp enable devices
PNP: 015c.2 enabled
SIO en_dev
pnp enable devices
PNP: 015c.3 enabled
SIO en_dev
pnp enable devices
PNP: 015c.4 enabled
SIO en_dev
pnp enable devices
PNP: 015c.5 enabled
SIO en_dev
pnp enable devices
PNP: 015c.6 enabled
SIO en_dev
pnp enable devices
PNP: 015c.7 enabled
SIO en_dev
pnp enable devices
PNP: 015c.8 enabled
scan_static_bus for PCI: 00:14.0 done
scan_static_bus for PCI: 00:14.3
scan_static_bus for PCI: 00:14.3 done
PCI: pci_scan_bus returning with max=001
scan_static_bus for Root Device done
done
KBC I/O: e8Allocating resources...
Reading resources...
Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
PCI_DOMAIN: 0000 read_resources bus 0 link: 0
PCI: 00:01.0 compute_allocate_io: base: 00000000 size: 00000000 align: 12 gran: 12
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 01:00.0 14 * [0x00000000 - 0x000000ff] io
PCI: 00:01.0 compute_allocate_io: base: 00000100 size: 00001000 align: 12 gran: 12 done
PCI: 00:01.0 compute_allocate_prefmem: base: 00000000 size: 00000000 align: 20 gran: 20
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 01:00.0 10 * [0x00000000 - 0x00ffffff] prefmem
PCI: 00:01.0 compute_allocate_prefmem: base: 01000000 size: 01000000 align: 24 gran: 20 done
PCI: 00:01.0 compute_allocate_mem: base: 00000000 size: 00000000 align: 20 gran: 20
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 01:00.0 30 * [0x00000000 - 0x0001ffff] mem
PCI: 01:00.0 18 * [0x00020000 - 0x00020fff] mem
PCI: 00:01.0 compute_allocate_mem: base: 00021000 size: 00100000 align: 20 gran: 20 done
PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done
Root Device read_resources bus 0 link: 0 done
PCI: 00:01.0 1c * [0x00001000 - 0x00001fff] io
PCI: 00:0d.0 10 * [0x00002000 - 0x000020ff] io
PCI: 00:14.2 20 * [0x00002400 - 0x0000241f] io
PCI: 00:14.1 20 * [0x00002420 - 0x0000242f] io
Root Device compute_allocate_io: base: 00002430 size: 00002030 align: 12 gran: 0 done
Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:00.0 10 * [0x00000000 - 0x0fffffff] prefmem
PCI: 00:01.0 24 * [0x10000000 - 0x10ffffff] prefmem
PCI: 00:01.0 20 * [0x11000000 - 0x110fffff] mem
PCI: 00:0d.0 14 * [0x11100000 - 0x111000ff] mem
Root Device compute_allocate_mem: base: 11100100 size: 11100100 align: 28 gran: 0 done
Done reading resources.
Allocating VGA resource PCI: 01:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:01.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
Root Device compute_allocate_io: base: 00001000 size: 00002030 align: 12 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:01.0 1c * [0x00001000 - 0x00001fff] io
PCI: 00:0d.0 10 * [0x00002000 - 0x000020ff] io
PCI: 00:14.2 20 * [0x00002400 - 0x0000241f] io
PCI: 00:14.1 20 * [0x00002420 - 0x0000242f] io
Root Device compute_allocate_io: base: 00002430 size: 00001430 align: 12 gran: 0 done
Root Device compute_allocate_mem: base: e0000000 size: 11100100 align: 28 gran: 0
Root Device read_resources bus 0 link: 0
Root Device read_resources bus 0 link: 0 done
PCI: 00:00.0 10 * [0xe0000000 - 0xefffffff] prefmem
PCI: 00:01.0 24 * [0xf0000000 - 0xf0ffffff] prefmem
PCI: 00:01.0 20 * [0xf1000000 - 0xf10fffff] mem
PCI: 00:0d.0 14 * [0xf1100000 - 0xf11000ff] mem
Root Device compute_allocate_mem: base: f1100100 size: 11100100 align: 28 gran: 0 done
Root Device assign_resources, bus 0 link: 0
Setting RAM size to 64 MB
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
PCI: 00:00.0 10 <- [0x00e0000000 - 0x00efffffff] size 0x10000000 gran 0x1c prefmem
PCI: 00:01.0 compute_allocate_io: base: 00001000 size: 00001000 align: 12 gran: 12
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 01:00.0 14 * [0x00001000 - 0x000010ff] io
PCI: 00:01.0 compute_allocate_io: base: 00001100 size: 00001000 align: 12 gran: 12 done
PCI: 00:01.0 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus 01 io
PCI: 00:01.0 compute_allocate_prefmem: base: f0000000 size: 01000000 align: 24 gran: 20
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 01:00.0 10 * [0xf0000000 - 0xf0ffffff] prefmem
PCI: 00:01.0 compute_allocate_prefmem: base: f1000000 size: 01000000 align: 24 gran: 20 done
PCI: 00:01.0 24 <- [0x00f0000000 - 0x00f0ffffff] size 0x01000000 gran 0x14 bus 01 prefmem
PCI: 00:01.0 compute_allocate_mem: base: f1000000 size: 00100000 align: 20 gran: 20
PCI: 00:01.0 read_resources bus 1 link: 0
PCI: 00:01.0 read_resources bus 1 link: 0 done
PCI: 01:00.0 30 * [0xf1000000 - 0xf101ffff] mem
PCI: 01:00.0 18 * [0xf1020000 - 0xf1020fff] mem
PCI: 00:01.0 compute_allocate_mem: base: f1021000 size: 00100000 align: 20 gran: 20 done
PCI: 00:01.0 20 <- [0x00f1000000 - 0x00f10fffff] size 0x00100000 gran 0x14 bus 01 mem
PCI: 00:01.0 assign_resources, bus 1 link: 0
PCI: 01:00.0 10 <- [0x00f0000000 - 0x00f0ffffff] size 0x01000000 gran 0x18 prefmem
PCI: 01:00.0 14 <- [0x0000001000 - 0x00000010ff] size 0x00000100 gran 0x08 io
PCI: 01:00.0 18 <- [0x00f1020000 - 0x00f1020fff] size 0x00001000 gran 0x0c mem
PCI: 01:00.0 30 <- [0x00f1000000 - 0x00f101ffff] size 0x00020000 gran 0x11 romem
PCI: 00:01.0 assign_resources, bus 1 link: 0
PCI: 00:0d.0 10 <- [0x0000002000 - 0x00000020ff] size 0x00000100 gran 0x08 io
PCI: 00:0d.0 14 <- [0x00f1100000 - 0x00f11000ff] size 0x00000100 gran 0x08 mem
PCI: 00:14.1 20 <- [0x0000002420 - 0x000000242f] size 0x00000010 gran 0x04 io
PCI: 00:14.2 20 <- [0x0000002400 - 0x000000241f] size 0x00000020 gran 0x05 io
PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0
Root Device assign_resources, bus 0 link: 0
Done setting resources.
Done allocating resources.
KBC I/O: e8Enabling resources...
PCI: 00:00.0 cmd <- 06
PCI: 00:01.0 bridge ctrl <- 008b
PCI: 00:01.0 cmd <- 07
PCI: 01:00.0 cmd <- 83
PCI: 00:0d.0 cmd <- 07
PCI: 00:14.0 cmd <- 07
PCI: 00:14.1 cmd <- 05
PCI: 00:14.2 cmd <- 05
PCI: 00:14.3 cmd <- 01
done.
KBC I/O: e8Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
malloc Enter, size 668, free_mem_ptr 00024538
malloc 0x00024538
Initializing CPU #0
CPU: vendor Intel device 683
CPU: family 06, model 08, stepping 03
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB
Setting fixed MTRRs(24-88) Type: WB
DONE fixed MTRRs
call enable_fixed_mtrr()
Setting variable MTRR 0, base: 0MB, range: 64MB, type WB
ADDRESS_MASK_HIGH=0xf
DONE variable MTRRs
Clear out the extra MTRR's
call enable_var_mtrr()
Leave x86_setup_var_mtrrs
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
microcode_info: sig = 0x00000683 pf=0x00000001 rev = 0x0000000c
microcode updated to revision: 0000000c from revision 0000000c
Disabling local apic...done.
CPU #0 Initialized
PCI: 00:00.0 init
Northbridge Init
PCI: 00:14.0 init
PNP: 015c.0 init
SIO Init
>KBC I/O: e8Keyboard init...
Keyboard selftest failed
<KBC I/O: 1PNP: 015c.1 init
SIO Init
PNP: 015c.2 init
SIO Init
PNP: 015c.3 init
SIO Init
PNP: 015c.4 init
SIO Init
PNP: 015c.5 init
SIO Init
PNP: 015c.6 init
SIO Init
PNP: 015c.7 init
SIO Init
PNP: 015c.8 init
SIO Init
PCI: 00:14.1 init
Primary IDE interface enabled
Primary IDE, drive 0: UDMA/33 off
Primary IDE, drive 1: UDMA/33 off
Secondary IDE interface enabled
Secondary IDE, drive 0: UDMA/33 off
Secondary IDE, drive 1: UDMA/33 off
Access to legacy IDE ports enabled
PCI: 00:14.2 init
USB host controller disabled
PCI: 00:0d.0 init
PCI: 01:00.0 init
rom address for PCI: 01:00.0 = f1000000
PCI Expansion ROM, signature 0x0202, INIT size 0x0400, data ptr 0x0202
Incorrect Expansion ROM Header Signature 0202
KBC I/O: e8Devices initialized
7KBC I/O: e8Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...done
Checking IRQ routing table consistency...
check_pirq_routing_table() - irq_routing_table located at: 0x000f0000
done.
Moving GDT to 0x500...ok
Adjust low_table_end from 0x00000530 to 0x00001000
Adjust rom_table_end from 0x000f0400 to 0x00100000
Wrote linuxbios table at: 00000530 - 000006b8 checksum 89ad
8KBC I/O: e8
KBC I/O: e8Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfffe0000 - 0xfffeffff
Found ELF candidate at offset 0
header_offset is 0
Try to load at offset 0x0
malloc Enter, size 32, free_mem_ptr 000247d4
malloc 0x000247d4
New segment addr 0x100000 size 0x2b980 offset 0xe0 filesize 0xcc88
(cleaned up) New segment addr 0x100000 size 0x2b980 offset 0xe0 filesize 0xcc88
lb: [0x0000000000004000, 0x0000000000028000)
malloc Enter, size 32, free_mem_ptr 000247f4
malloc 0x000247f4
New segment addr 0x12b980 size 0x48 offset 0xcd80 filesize 0x48
(cleaned up) New segment addr 0x12b980 size 0x48 offset 0xcd80 filesize 0x48
lb: [0x0000000000004000, 0x0000000000028000)
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x0000000000100000 memsz: 0x000000000002b980 filesz: 0x000000000000cc88
[ 0x0000000000100000, 000000000010cc88, 0x000000000012b980) <- 00000000000000e0
Clearing Segment: addr: 0x000000000010cc88 memsz: 0x000000000001ecf8
Loading Segment: addr: 0x000000000012b980 memsz: 0x0000000000000048 filesz: 0x0000000000000048
[ 0x000000000012b980, 000000000012b9c8, 0x000000000012b9c8) <- 000000000000cd80
Loaded segments
verified segments
closed down stream
Jumping to boot code at 0x108a68
entry = 0x00108a68
lb_start = 0x00004000
lb_size = 0x00024000
adjust = 0x03fd8000
buffer = 0x03fb8000
elf_boot_notes = 0x0001dae0
adjusted_boot_notes = 0x03ff5ae0
FILO version 0.5 (root@localhost) Tue Dec 25 06:20:37 CET 2007
menu: hda1:/boot/filo/menu.lst
hda: LBA 3227MB: ST33221A
Mounted ext2fs
[H[J
FILO 0.5
[m[4;2H+-------------------------------------------------------------------------+[5;2H|[5;76H|[6;2H|[6;76H|[7;2H|[7;76H|[8;2H|[8;76H|[9;2H|[9;76H|[10;2H|[10;76H|[11;2H|[11;76H|[12;2H|[12;76H|[13;2H|[13;76H|[14;2H|[14;76H|[15;2H|[15;76H|[16;2H|[16;76H|[17;2H+-------------------------------------------------------------------------+[m
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, 'a' to modify the kernel arguments
before booting, or 'c' for a command-line.[5;78H [m[7m[5;3H Linux [5;75H[m[m[6;3H Linux [6;75H[m[m[7;3H [7;75H[m[m[8;3H [8;75H[m[m[9;3H [9;75H[m[m[10;3H [10;75H[m[m[11;3H [11;75H[m[m[12;3H [12;75H[m[m[13;3H [13;75H[m[m[14;3H [14;75H[m[m[15;3H [15;75H[m[m[16;3H [16;75H[m[16;78H [5;75H[23;4HThe highlighted entry will be booted automatically in 3 seconds. [5;75H[23;4HThe highlighted entry will be booted automatically in 2 seconds. [5;75H[23;4HThe highlighted entry will be booted automatically in 1 seconds. [5;75H[H[J Booting 'Linux'
root (hd0,0)
kernel /boot/vmlinuz console=ttyS0,115200 root=/dev/hda1
[H[J
Booting 'hda1:/boot/vmlinuz console=ttyS0,115200 root=/dev/hda1'
Loading Linux version 2.6.22-gentoo-r8 (root@localhost) #1 Tue Oct 23 23:49:44 CEST 2007...
Jumping to entry point...
Firmware type: LinuxBIOS
Linux version 2.6.22-gentoo-r8 (root@localhost) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #1 Tue Oct 23 23:49:44 CEST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000001000 (reserved)
BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
64MB LOWMEM available.
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 16384
early_node_map[1] active PFN ranges
0: 0 -> 16384
DMI not present or invalid.
Using APIC driver default
ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Allocating PCI resources starting at 10000000 (gap: 04000000:fc000000)
Built 1 zonelists. Total pages: 16256
Kernel command line: console=ttyS0,115200 root=/dev/hda1
Local APIC disabled by BIOS -- you can enable it with "lapic"
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 256 (order: 8, 1024 bytes)
Detected 597.433 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 59276k/65536k available (3039k kernel code, 5852k reserved, 1485k data, 256k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb6000 - 0xfffff000 ( 292 kB)
vmalloc : 0xc4800000 - 0xfffb4000 ( 951 MB)
lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
.init : 0xc056e000 - 0xc05ae000 ( 256 kB)
.data : 0xc03f7c70 - 0xc056b2ac (1485 kB)
.text : 0xc0100000 - 0xc03f7c70 (3039 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1195.67 BogoMIPS (lpj=2391344)
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel Pentium III (Coppermine) stepping 03
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region 0f00-0f0f claimed by PIIX4 SMB
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:14.0
PCI: Found IRQ 5 for device 0000:00:0d.0
PCI: Found IRQ 10 for device 0000:00:14.2
PCI: Bridge: 0000:00:01.0
Time: tsc clocksource has been installed.
IO window: 1000-1fff
MEM window: f1000000-f10fffff
PREFETCH window: f0000000-f0ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Limiting direct PCI/PCI transfers.
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 256M @ 0xe0000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
PCI: No IRQ known for interrupt pin A of device 0000:01:00.0. Please try using pci=biosirq.
atyfb: using auxiliary register aperture
atyfb: 3D RAGE PRO (Mach64 GB, BGA, AGP) [0x4742 rev 0x7c]
atyfb: no BIOS frequency table found, use parameters
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:00:0d.0: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.28
PCI: Found IRQ 5 for device 0000:00:0d.0
eth0: RealTek RTL8139 at 0xc4846000, 00:02:44:28:04:fc, IRQ 5
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:14.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2420-0x2427, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2428-0x242f, BIOS settings: hdc:DMA, hdd:pio
hda: ST33221A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Compaq CRN-8241B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 6303024 sectors (3227 MB) w/128KiB Cache, CHS=6253/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1 hda2
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.002.
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.04
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
USB Universal Host Controller Interface driver v3.0
PCI: Enabling device 0000:00:14.2 (0000 -> 0001)
PCI: Found IRQ 10 for device 0000:00:14.2
uhci_hcd 0000:00:14.2: UHCI Host Controller
uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:14.2: irq 10, io base 0x00002400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
oprofile: using timer interrupt.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI Shortcut mode
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 256k freed
INIT: version 2.86 booting
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2007 Gentoo Foundation; Distributed under the GPLv2
Press I to enter interactive boot mode
* Mounting proc at /proc ... [ ok ]
* Mounting sysfs at /sys ... [ ok ]
* Mounting /dev for udev ... [ ok ]
* Seeding /dev with needed nodes ... [ ok ]
* Setting up proper hotplug agent ...
* Using netlink for hotplug events...
[ ok ]
* Starting udevd ... [ ok ]
* Populating /dev with existing devices through uevents ... [ ok ]
* Letting udev process events ... [ ok ]
* Finalizing udev configuration ... [ ok ]
* Mounting devpts at /dev/pts ... [ ok ]
* Checking root filesystem .../dev/hda1: clean, 242020/614688 files, 496502/614486 blocks
[ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Checking all filesystems ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Mounting USB device filesystem (usbfs) ... [ ok ]
* Activating (possible) swap ...swapon: /dev/hda2: Invalid argument
[ !! ]
* Your TIMEZONE in /etc/conf.d/clock is still set to Factory!
* Setting system clock using the hardware clock [UTC] ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Updating environment ... [ ok ]
* Cleaning /var/lock, /var/run ... [ ok ]
* Cleaning /tmp directory ... [ ok ]
* Device initiated services: net.eth0
* Setting hostname to localhost ... [ ok ]
* Loading key mappings ... [ ok ]
* Setting terminal encoding to UTF-8 ... [ ok ]
* Setting user font ... [ ok ]
* Starting lo
* Bringing up lo
* 127.0.0.1/8
[ ok ]
* Adding routes
* 127.0.0.0/8 ... [ ok ]
* Starting eth0
* Bringing up eth0
* 192.168.99.88/24
[ ok ]
* Adding routes
* default via 192.168.99.1 ... [ ok ]
* Initializing random number generator ... [ ok ]
INIT: Entering runlevel: 3
* Starting portmap ... [ ok ]
* Mounting network filesystems ... [ ok ]
* Starting sshd ... [ ok ]
* Starting local ... [ ok ]
This is localhost.(none) (Linux i686 2.6.22-gentoo-r8) 21:45:37