rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ef90000 (usable)
[ 0.000000] BIOS-e820: 000000007ef90000 - 000000007ef9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ef9e000 - 000000007efe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007efe0000 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 1135MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 520080) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 520080
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 520080
[ 0.000000] On node 0 totalpages: 520080
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2271 pages used for memmap
[ 0.000000] HighMem zone: 288433 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA950 checksum 0
[ 0.000000] ACPI: RSDP 000FA950, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7EF90000, 0040 (r1 MSTEST TESTONLY 7000725 MSFT 97)
[ 0.000000] ACPI: FACP 7EF90200, 0084 (r2 MSTEST OEMFACP 7000725 MSFT 97)
[ 0.000000] ACPI: DSDT 7EF905C0, 7C09 (r1 A0518 A0518000 0 INTL 20060113)
[ 0.000000] ACPI: FACS 7EF9E000, 0040
[ 0.000000] ACPI: APIC 7EF90390, 006C (r1 MSTEST OEMAPIC 7000725 MSFT 97)
[ 0.000000] ACPI: MCFG 7EF90400, 003C (r1 MSTEST OEMMCFG 7000725 MSFT 97)
[ 0.000000] ACPI: OEMB 7EF9E040, 007B (r1 MSTEST AMI_OEM 7000725 MSFT 97)
[ 0.000000] ACPI: HPET 7EF981D0, 0038 (r1 MSTEST OEMHPET 7000725 MSFT 97)
[ 0.000000] ACPI: ASF! 7EF98208, 0099 (r32 LEGEND I865PASF 1 INTL 20060113)
[ 0.000000] ACPI: GSCI 7EF9E0C0, 2024 (r1 MSTEST GMCHSCI 7000725 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000:7fe00000)
[ 0.000000] Built 1 zonelists. Total pages: 516017
[ 0.000000] Kernel command line: root=UUID=a016caee-bacf-4381-ac8a-37bb96a2bd01 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2006.263 MHz processor.
[ 26.448870] Console: colour VGA+ 80x25
[ 26.449189] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 26.449482] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 26.526322] Memory: 2050716k/2080320k available (2015k kernel code, 28348k reserved, 916k data, 364k init, 1162816k highmem)
[ 26.526329] virtual kernel memory layout:
[ 26.526330] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 26.526331] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 26.526332] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 26.526333] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 26.526334] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 26.526335] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 26.526336] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 26.526339] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 26.526369] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 26.526490] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 26.526495] hpet0: 3 64-bit timers, 14318180 Hz
[ 26.607444] Calibrating delay using timer specific routine.. 4015.40 BogoMIPS (lpj=8030819)
[ 26.607463] Security Framework v1.0.0 initialized
[ 26.607468] SELinux: Disabled at boot.
[ 26.607480] Mount-cache hash table entries: 512
[ 26.607584] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 26.607590] monitor/mwait feature present.
[ 26.607592] using mwait in idle threads.
[ 26.607596] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 26.607598] CPU: L2 cache: 2048K
[ 26.607600] CPU: Physical Processor ID: 0
[ 26.607601] CPU: Processor Core ID: 0
[ 26.607603] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 26.607611] Compat vDSO mapped to ffffe000.
[ 26.607621] Checking 'hlt' instruction... OK.
[ 26.623557] SMP alternatives: switching to UP code
[ 26.623926] Early unpacking initramfs... done
[ 26.906835] ACPI: Core revision 20070126
[ 26.906879] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 26.930405] CPU0: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 26.930419] SMP alternatives: switching to SMP code
[ 26.930479] Booting processor 1/1 eip 3000
[ 26.940630] Initializing CPU#1
[ 27.019110] Calibrating delay using timer specific routine.. 4012.50 BogoMIPS (lpj=8025005)
[ 27.019116] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 27.019120] monitor/mwait feature present.
[ 27.019122] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 27.019124] CPU: L2 cache: 2048K
[ 27.019125] CPU: Physical Processor ID: 0
[ 27.019127] CPU: Processor Core ID: 1
[ 27.019128] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 27.019630] CPU1: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 27.019646] Total of 2 processors activated (8027.91 BogoMIPS).
[ 27.019787] ENABLING IO-APIC IRQs
[ 27.019952] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 27.167065] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 27.187060] Brought up 2 CPUs
[ 27.427509] migration_cost=28
[ 27.427615] Booting paravirtualized kernel on bare hardware
[ 27.427666] Time: 11:12:29 Date: 09/24/107
[ 27.427681] NET: Registered protocol family 16
[ 27.427749] EISA bus registered
[ 27.427754] ACPI: bus type pci registered
[ 27.427875] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 27.427877] PCI: Using configuration type 1
[ 27.427879] Setting up standard PCI resources
[ 27.436036] ACPI: EC: Look up EC in DSDT
[ 27.440430] ACPI: Interpreter enabled
[ 27.440433] ACPI: (supports S0 S1 S3 S4 S5)
[ 27.440449] ACPI: Using IOAPIC for interrupt routing
[ 27.448729] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 27.448743] PCI: Probing PCI hardware (bus 00)
[ 27.449344] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 27.449347] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 27.450172] PCI: Transparent bridge - 0000:00:1e.0
[ 27.450228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 27.450373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 27.450454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 27.450561] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 27.450646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 27.450738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 27.465191] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 27.465306] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 27.465419] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 27.465532] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 27.465643] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 27.465756] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 27.465869] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 27.465981] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 27.466081] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 27.466091] pnp: PnP ACPI init
[ 27.466097] ACPI: bus type pnp registered
[ 27.469540] pnp: PnP ACPI: found 16 devices
[ 27.469542] ACPI: ACPI bus type pnp unregistered
[ 27.469545] PnPBIOS: Disabled by ACPI PNP
[ 27.469583] PCI: Using ACPI for IRQ routing
[ 27.469585] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 27.481320] NET: Registered protocol family 8
[ 27.481322] NET: Registered protocol family 20
[ 27.481363] pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 27.481369] pnp: 00:07: ioport range 0x290-0x297 has been reserved
[ 27.481374] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 27.481376] pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 27.481379] pnp: 00:08: iomem range 0xff9fa000-0xff9fafff has been reserved
[ 27.481382] pnp: 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved
[ 27.481387] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 27.481389] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 27.481394] pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 27.481399] pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 27.481401] pnp: 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[ 27.481403] pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 27.481406] pnp: 00:0f: iomem range 0x100000-0x7effffff could not be reserved
[ 27.482739] Time: tsc clocksource has been installed.
[ 27.482752] Switched to high resolution mode on CPU 0
[ 27.482818] Switched to high resolution mode on CPU 1
[ 27.511627] PCI: Bridge: 0000:00:01.0
[ 27.511628] IO window: disabled.
[ 27.511631] MEM window: disabled.
[ 27.511634] PREFETCH window: bfc00000-bfcfffff
[ 27.511637] PCI: Bridge: 0000:00:1c.0
[ 27.511638] IO window: disabled.
[ 27.511642] MEM window: disabled.
[ 27.511645] PREFETCH window: bfd00000-bfdfffff
[ 27.511650] PCI: Bridge: 0000:00:1c.4
[ 27.511652] IO window: b000-bfff
[ 27.511656] MEM window: ff600000-ff6fffff
[ 27.511659] PREFETCH window: disabled.
[ 27.511663] PCI: Bridge: 0000:00:1c.5
[ 27.511665] IO window: a000-afff
[ 27.511670] MEM window: ff500000-ff5fffff
[ 27.511673] PREFETCH window: disabled.
[ 27.511677] PCI: Bridge: 0000:00:1e.0
[ 27.511678] IO window: disabled.
[ 27.511682] MEM window: ff700000-ff7fffff
[ 27.511686] PREFETCH window: bfe00000-bfefffff
[ 27.511698] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 27.511703] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 27.511718] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 27.511722] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 27.511737] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 27.511741] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 27.511756] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 27.511760] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 27.511769] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 27.511777] NET: Registered protocol family 2
[ 27.562668] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 27.562732] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 27.563350] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 27.563559] TCP: Hash tables configured (established 131072 bind 65536)
[ 27.563561] TCP reno registered
[ 27.578797] checking if image is initramfs... it is
[ 28.137809] Freeing initrd memory: 7354k freed
[ 28.138276] audit: initializing netlink socket (disabled)
[ 28.138286] audit(1193224349.316:1): initialized
[ 28.138362] highmem bounce pool size: 64 pages
[ 28.139838] VFS: Disk quotas dquot_6.5.1
[ 28.139879] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 28.139951] io scheduler noop registered
[ 28.139953] io scheduler anticipatory registered
[ 28.139955] io scheduler deadline registered
[ 28.139965] io scheduler cfq registered (default)
[ 28.139979] Boot video device is 0000:00:02.0
[ 28.140135] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 28.140167] assign_interrupt_mode Found MSI capability
[ 28.140169] Allocate Port Service[0000:00:01.0:pcie00]
[ 28.140233] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 28.140269] assign_interrupt_mode Found MSI capability
[ 28.140270] Allocate Port Service[0000:00:1c.0:pcie00]
[ 28.140294] Allocate Port Service[0000:00:1c.0:pcie02]
[ 28.140362] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 28.140398] assign_interrupt_mode Found MSI capability
[ 28.140400] Allocate Port Service[0000:00:1c.4:pcie00]
[ 28.140424] Allocate Port Service[0000:00:1c.4:pcie02]
[ 28.140491] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 28.140527] assign_interrupt_mode Found MSI capability
[ 28.140529] Allocate Port Service[0000:00:1c.5:pcie00]
[ 28.140554] Allocate Port Service[0000:00:1c.5:pcie02]
[ 28.140672] isapnp: Scanning for PnP cards...
[ 28.493303] isapnp: No Plug & Play device found
[ 28.509565] Real Time Clock Driver v1.12ac
[ 28.509713] hpet_resources: 0xfed00000 is busy
[ 28.509755] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 28.509840] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 28.510322] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 28.510897] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 28.511064] input: Macintosh mouse button emulation as /class/input/input0
[ 28.511129] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 28.513600] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 28.513604] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 28.513691] mice: PS/2 mouse device common for all mice
[ 28.513767] EISA: Probing bus 0 at eisa.0
[ 28.513792] EISA: Detected 0 cards.
[ 28.513866] TCP cubic registered
[ 28.513878] NET: Registered protocol family 1
[ 28.513895] Using IPI No-Shortcut mode
[ 28.514030] Magic number: 11:162:227
[ 28.514051] hash matches device ttyre
[ 28.514102] hash matches device PNP0200:00
[ 28.514254] Freeing unused kernel memory: 364k freed
[ 28.549688] input: AT Translated Set 2 keyboard as /class/input/input1
[ 29.692583] AppArmor: AppArmor initialized<5>audit(1193224350.816:2): type=1505 info="AppArmor initialized" pid=1253
[ 29.697401] fuse init (API version 7.8)
[ 29.700951] Failure registering capabilities with primary security module.
[ 29.735806] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - D6, should be D1 [20070126]
[ 29.735817] ACPI: SSDT 7EFA00F0, 0208 (r1 AMI CPU1PM 1 INTL 20060113)
[ 29.736159] ACPI: SSDT 7EFA0300, 013A (r1 AMI CPU2PM 1 INTL 20060113)
[ 29.736347] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 29.736356] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 30.134203] usbcore: registered new interface driver usbfs
[ 30.134226] usbcore: registered new interface driver hub
[ 30.134245] usbcore: registered new device driver usb
[ 30.134872] USB Universal Host Controller Interface driver v3.0
[ 30.134920] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 30.134930] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 30.134933] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 30.135041] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 30.135066] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[ 30.135156] usb usb1: configuration #1 chosen from 1 choice
[ 30.135176] hub 1-0:1.0: USB hub found
[ 30.135180] hub 1-0:1.0: 2 ports detected
[ 30.148536] SCSI subsystem initialized
[ 30.152453] libata version 2.21 loaded.
[ 30.236546] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 30.236559] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 30.236569] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 30.236588] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 30.236614] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000dc00
[ 30.236689] usb usb2: configuration #1 chosen from 1 choice
[ 30.236708] hub 2-0:1.0: USB hub found
[ 30.236713] hub 2-0:1.0: 2 ports detected
[ 30.340433] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 30.340443] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 30.340447] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 30.340473] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 30.340501] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000d400
[ 30.340572] usb usb3: configuration #1 chosen from 1 choice
[ 30.340593] hub 3-0:1.0: USB hub found
[ 30.340598] hub 3-0:1.0: 2 ports detected
[ 30.444333] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 30.444343] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 30.444347] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 30.444371] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 30.444401] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 30.444472] usb usb4: configuration #1 chosen from 1 choice
[ 30.444493] hub 4-0:1.0: USB hub found
[ 30.444498] hub 4-0:1.0: 2 ports detected
[ 30.548247] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 30.548257] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 30.548261] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 30.548287] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 30.548312] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000d800
[ 30.548391] usb usb5: configuration #1 chosen from 1 choice
[ 30.548410] hub 5-0:1.0: USB hub found
[ 30.548415] hub 5-0:1.0: 2 ports detected
[ 30.652267] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 30.652286] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 30.652301] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 30.652477] eth0: RTL8168b/8111b at 0xf8808000, 00:1b:fc:36:c7:73, XID 38000000 IRQ 17
[ 30.653624] ata_piix 0000:00:1f.2: version 2.11
[ 30.653628] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 30.653645] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 30.653670] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 30.653719] scsi0 : ata_piix
[ 30.653748] scsi1 : ata_piix
[ 30.653830] ata1: SATA max UDMA/133 cmd 0x0001e880 ctl 0x0001e802 bmdma 0x0001e080 irq 19
[ 30.653833] ata2: SATA max UDMA/133 cmd 0x0001e480 ctl 0x0001e402 bmdma 0x0001e088 irq 19
[ 30.982420] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
[ 30.982442] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
[ 30.982467] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 30.982490] scsi2 : ata_piix
[ 30.982529] scsi3 : ata_piix
[ 30.982609] ata3: SATA max UDMA/133 cmd 0x0001d080 ctl 0x0001d002 bmdma 0x0001c800 irq 19
[ 30.982612] ata4: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c808 irq 19
[ 31.311417] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
[ 31.311427] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 31.311431] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 31.311452] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 31.311478] ehci_hcd 0000:00:1a.7: debug port 1
[ 31.311484] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 31.311492] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xff9fb800
[ 31.315388] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 31.315457] usb usb6: configuration #1 chosen from 1 choice
[ 31.315478] hub 6-0:1.0: USB hub found
[ 31.315486] hub 6-0:1.0: 4 ports detected
[ 31.419547] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 31.419561] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 31.419565] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 31.419591] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 31.419615] ehci_hcd 0000:00:1d.7: debug port 1
[ 31.419621] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 31.419625] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xff9fb400
[ 31.423491] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 31.423551] usb usb7: configuration #1 chosen from 1 choice
[ 31.423572] hub 7-0:1.0: USB hub found
[ 31.423577] hub 7-0:1.0: 6 ports detected
[ 31.527438] ahci 0000:03:00.0: version 2.2
[ 31.527462] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.530510] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 32.530518] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 32.530527] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 32.530680] scsi4 : ahci
[ 32.530828] scsi5 : ahci
[ 32.530957] ata5: SATA max UDMA/133 cmd 0xf8890100 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 32.530961] ata6: SATA max UDMA/133 cmd 0xf8890180 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 32.842216] ata5: SATA link down (SStatus 0 SControl 300)
[ 33.153952] ata6: SATA link down (SStatus 0 SControl 300)
[ 33.154014] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 20 (level, low) -> IRQ 21
[ 33.203750] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ff7ff800-ff7fffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 33.203812] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
[ 33.203818] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 33.203852] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 33.204200] scsi6 : pata_jmicron
[ 33.204713] scsi7 : pata_jmicron
[ 33.204888] ata7: PATA max UDMA/100 cmd 0x0001bc00 ctl 0x0001b882 bmdma 0x0001b400 irq 17
[ 33.204892] ata8: PATA max UDMA/100 cmd 0x0001b800 ctl 0x0001b482 bmdma 0x0001b408 irq 17
[ 33.576256] ata7.00: ATA-7: MAXTOR STM3160812A, 3.AAK, max UDMA/100
[ 33.576260] ata7.00: 312581808 sectors, multi 0: LBA48
[ 33.576266] ata7.01: ATAPI: PIONEER DVD-RW DVR-111D, 1.06, max UDMA/66
[ 33.642783] ata7.00: configured for UDMA/100
[ 33.813927] ata7.01: configured for UDMA/66
[ 33.980708] scsi 6:0:0:0: Direct-Access ATA MAXTOR STM316081 3.AA PQ: 0 ANSI: 5
[ 33.986998] scsi 6:0:1:0: CD-ROM PIONEER DVD-RW DVR-111D 1.06 PQ: 0 ANSI: 5
[ 33.993325] sd 6:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 33.993335] sd 6:0:0:0: [sda] Write Protect is off
[ 33.993337] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.993349] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.993389] sd 6:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 33.993397] sd 6:0:0:0: [sda] Write Protect is off
[ 33.993399] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.993410] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.993414] sda: sda1 sda2 sda3
[ 34.027645] sd 6:0:0:0: [sda] Attached SCSI disk
[ 34.030998] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 34.031013] sr 6:0:1:0: Attached scsi generic sg1 type 5
[ 34.062320] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 34.062323] Uniform CD-ROM driver Revision: 3.20
[ 34.062359] sr 6:0:1:0: Attached scsi CD-ROM sr0
[ 34.349748] Attempting manual resume
[ 34.349751] swsusp: Resume From Partition 8:2
[ 34.349753] PM: Checking swsusp image.
[ 34.349918] PM: Resume from disk failed.
[ 34.370149] kjournald starting. Commit interval 5 seconds
[ 34.370155] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.472959] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001329df9]
[ 38.388481] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.390842] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.490362] Linux agpgart interface v0.102 (c) Dave Jones
[ 38.540594] agpgart: Detected an Intel 965G Chipset.
[ 38.541459] agpgart: Detected 7676K stolen memory.
[ 38.554319] agpgart: AGP aperture is 256M @ 0xd0000000
[ 38.696960] iTCO_vendor_support: vendor-support=0
[ 38.697763] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 38.726301] Linux video capture interface: v2.00
[ 38.785128] bttv: driver version 0.9.17 loaded
[ 38.785131] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 38.785193] bttv: Bt8xx card found (0).
[ 38.785213] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 38.785224] bttv0: Bt878 (rev 17) at 0000:05:04.0, irq: 17, latency: 64, mmio: 0xbfefe000
[ 38.785232] bttv0: detected: AverMedia AverTV DVB-T 761 [card=124], PCI subsystem ID is 1461:0761
[ 38.785235] bttv0: using: AverMedia AverTV DVB-T 761 [card=124,autodetected]
[ 38.785259] bttv0: gpio: en=00000000, out=00000000 in=009800cd [init]
[ 38.785608] bttv0: using tuner=-1
[ 38.785628] bttv0: registered device video0
[ 38.785644] bttv0: registered device vbi0
[ 38.785664] bttv0: PLL: 28636363 => 35468950 .. ok
[ 38.821195] bttv0: add subdevice "dvb0"
[ 38.821269] input: bttv IR (card=124) as /class/input/input2
[ 38.984259] bt878: AUDIO driver version 0.0.0 loaded
[ 38.984289] bt878: Bt878 AUDIO function found (0).
[ 38.984307] ACPI: PCI Interrupt 0000:05:04.1[A] -> GSI 17 (level, low) -> IRQ 17
[ 38.984313] bt878_probe: card id=[0x7611461],[ AverMedia AverTV DVB-T 761 ] has DVB functions.
[ 38.984320] bt878(0): Bt878 (rev 17) at 05:04.1, irq: 17, latency: 64, memory: 0xbfeff000
[ 39.002895] DVB: registering new adapter (bttv0).
[ 39.027049] DVB: registering frontend 0 (Spase SP887x DVB-T)...
[ 39.157961] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 39.157981] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 39.317851] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 39.320412] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
[ 39.320415] parport_pc 00:0a: reported by Plug and Play ACPI
[ 39.320474] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.320525] parport0: PC-style at 0x378 (0x778), irq 7<6>input: PC Speaker as /class/input/input4
[ 39.321095] , dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 39.645714] lp0: using parport0 (interrupt-driven).
[ 39.696614] Adding 714884k swap on /dev/sda2. Priority:-1 extents:1 across:714884k
[ 39.976551] EXT3 FS on sda1, internal journal
[ 40.403540] kjournald starting. Commit interval 5 seconds
[ 40.403786] EXT3 FS on sda3, internal journal
[ 40.403791] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.061714] No dock devices found.
[ 41.146015] input: Power Button (FF) as /class/input/input5
[ 41.146134] ACPI: Power Button (FF) [PWRF]
[ 41.171031] input: Power Button (CM) as /class/input/input6
[ 41.171057] ACPI: Power Button (CM) [PWRB]
[ 42.058842] r8169: eth0: link up
[ 42.058862] r8169: eth0: link up
[ 42.323547] ppdev: user-space parallel port driver
[ 42.663848] audit(1193224363.914:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5155 profile="/usr/sbin/cupsd"
[ 42.713509] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 42.713513] apm: disabled - APM is not SMP safe.
[ 43.841177] [drm] Initialized drm 1.1.0 20060810
[ 43.842609] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 43.842792] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 43.851726] Failure registering capabilities with primary security module.
[ 44.052902] Bluetooth: Core ver 2.11
[ 44.052946] NET: Registered protocol family 31
[ 44.052948] Bluetooth: HCI device and connection manager initialized
[ 44.052951] Bluetooth: HCI socket layer initialized
[ 44.092440] Bluetooth: L2CAP ver 2.8
[ 44.092443] Bluetooth: L2CAP socket layer initialized
[ 44.144377] Bluetooth: RFCOMM socket layer initialized
[ 44.144574] Bluetooth: RFCOMM TTY layer initialized
[ 44.144576] Bluetooth: RFCOMM ver 1.8
[ 48.786582] NET: Registered protocol family 17
[ 50.788094] NET: Registered protocol family 10
[ 50.788284] lo: Disabled Privacy Extensions
[ 60.914534] eth0: no IPv6 routers present
[ 71.362945] NET: Registered protocol family 4
[ 71.403225] NET: Registered protocol family 3
[ 71.426069] NET: Registered protocol family 5
[ 158.280493] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 158.304012] sp887x: no firmware upload (timeout or file not found?)
[ 196.369517] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 196.371464] sp887x: no firmware upload (timeout or file not found?)