rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ef90000 (usable)
[ 0.000000] BIOS-e820: 000000007ef90000 - 000000007ef9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ef9e000 - 000000007efe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007efe0000 - 000000007f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 1135MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 520080) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 520080
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 520080
[ 0.000000] On node 0 totalpages: 520080
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2271 pages used for memmap
[ 0.000000] HighMem zone: 288433 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FA950 checksum 0
[ 0.000000] ACPI: RSDP 000FA950, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7EF90000, 0040 (r1 MSTEST TESTONLY 7000725 MSFT 97)
[ 0.000000] ACPI: FACP 7EF90200, 0084 (r2 MSTEST OEMFACP 7000725 MSFT 97)
[ 0.000000] ACPI: DSDT 7EF905C0, 7C09 (r1 A0518 A0518000 0 INTL 20060113)
[ 0.000000] ACPI: FACS 7EF9E000, 0040
[ 0.000000] ACPI: APIC 7EF90390, 006C (r1 MSTEST OEMAPIC 7000725 MSFT 97)
[ 0.000000] ACPI: MCFG 7EF90400, 003C (r1 MSTEST OEMMCFG 7000725 MSFT 97)
[ 0.000000] ACPI: OEMB 7EF9E040, 007B (r1 MSTEST AMI_OEM 7000725 MSFT 97)
[ 0.000000] ACPI: HPET 7EF981D0, 0038 (r1 MSTEST OEMHPET 7000725 MSFT 97)
[ 0.000000] ACPI: ASF! 7EF98208, 0099 (r32 LEGEND I865PASF 1 INTL 20060113)
[ 0.000000] ACPI: GSCI 7EF9E0C0, 2024 (r1 MSTEST GMCHSCI 7000725 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000:7fe00000)
[ 0.000000] Built 1 zonelists. Total pages: 516017
[ 0.000000] Kernel command line: root=UUID=a016caee-bacf-4381-ac8a-37bb96a2bd01 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2006.385 MHz processor.
[ 27.522003] Console: colour VGA+ 80x25
[ 27.522320] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 27.522611] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 27.599508] Memory: 2050716k/2080320k available (2015k kernel code, 28348k reserved, 916k data, 364k init, 1162816k highmem)
[ 27.599515] virtual kernel memory layout:
[ 27.599516] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 27.599517] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 27.599518] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 27.599519] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 27.599520] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 27.599521] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 27.599522] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 27.599524] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 27.599556] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 27.599677] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 27.599682] hpet0: 3 64-bit timers, 14318180 Hz
[ 27.680631] Calibrating delay using timer specific routine.. 4015.40 BogoMIPS (lpj=8030819)
[ 27.680651] Security Framework v1.0.0 initialized
[ 27.680656] SELinux: Disabled at boot.
[ 27.680666] Mount-cache hash table entries: 512
[ 27.680772] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 27.680778] monitor/mwait feature present.
[ 27.680779] using mwait in idle threads.
[ 27.680783] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 27.680785] CPU: L2 cache: 2048K
[ 27.680787] CPU: Physical Processor ID: 0
[ 27.680789] CPU: Processor Core ID: 0
[ 27.680790] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 27.680799] Compat vDSO mapped to ffffe000.
[ 27.680809] Checking 'hlt' instruction... OK.
[ 27.696743] SMP alternatives: switching to UP code
[ 27.697111] Early unpacking initramfs... done
[ 27.980037] ACPI: Core revision 20070126
[ 27.980080] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 28.002792] CPU0: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 28.002805] SMP alternatives: switching to SMP code
[ 28.002862] Booting processor 1/1 eip 3000
[ 28.013015] Initializing CPU#1
[ 28.092297] Calibrating delay using timer specific routine.. 4012.52 BogoMIPS (lpj=8025059)
[ 28.092303] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 28.092307] monitor/mwait feature present.
[ 28.092310] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 28.092311] CPU: L2 cache: 2048K
[ 28.092313] CPU: Physical Processor ID: 0
[ 28.092314] CPU: Processor Core ID: 1
[ 28.092316] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 28.092816] CPU1: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 28.092833] Total of 2 processors activated (8027.93 BogoMIPS).
[ 28.092972] ENABLING IO-APIC IRQs
[ 28.093137] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 28.240253] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 28.260250] Brought up 2 CPUs
[ 28.430984] migration_cost=28
[ 28.431088] Booting paravirtualized kernel on bare hardware
[ 28.431138] Time: 0:52:57 Date: 09/24/107
[ 28.431154] NET: Registered protocol family 16
[ 28.431221] EISA bus registered
[ 28.431225] ACPI: bus type pci registered
[ 28.431348] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 28.431349] PCI: Using configuration type 1
[ 28.431351] Setting up standard PCI resources
[ 28.439255] ACPI: EC: Look up EC in DSDT
[ 28.443648] ACPI: Interpreter enabled
[ 28.443650] ACPI: (supports S0 S1 S3 S4 S5)
[ 28.443666] ACPI: Using IOAPIC for interrupt routing
[ 28.451927] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 28.451941] PCI: Probing PCI hardware (bus 00)
[ 28.452566] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 28.452570] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 28.453394] PCI: Transparent bridge - 0000:00:1e.0
[ 28.453451] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 28.453594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 28.453676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 28.453784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 28.453868] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 28.453961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 28.468407] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 28.468523] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 28.468636] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 28.468748] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 28.468861] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 28.468973] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 28.469086] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 28.469198] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 28.469299] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 28.469309] pnp: PnP ACPI init
[ 28.469315] ACPI: bus type pnp registered
[ 28.472690] pnp: PnP ACPI: found 16 devices
[ 28.472692] ACPI: ACPI bus type pnp unregistered
[ 28.472695] PnPBIOS: Disabled by ACPI PNP
[ 28.472730] PCI: Using ACPI for IRQ routing
[ 28.472732] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 28.484466] NET: Registered protocol family 8
[ 28.484468] NET: Registered protocol family 20
[ 28.484508] pnp: 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 28.484514] pnp: 00:07: ioport range 0x290-0x297 has been reserved
[ 28.484519] pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 28.484521] pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 28.484524] pnp: 00:08: iomem range 0xff9fa000-0xff9fafff has been reserved
[ 28.484526] pnp: 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved
[ 28.484532] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 28.484534] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 28.484539] pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 28.484544] pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 28.484546] pnp: 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[ 28.484548] pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 28.484551] pnp: 00:0f: iomem range 0x100000-0x7effffff could not be reserved
[ 28.487982] Time: tsc clocksource has been installed.
[ 28.487994] Switched to high resolution mode on CPU 0
[ 28.488062] Switched to high resolution mode on CPU 1
[ 28.514778] PCI: Bridge: 0000:00:01.0
[ 28.514780] IO window: disabled.
[ 28.514783] MEM window: disabled.
[ 28.514785] PREFETCH window: bfc00000-bfcfffff
[ 28.514789] PCI: Bridge: 0000:00:1c.0
[ 28.514790] IO window: disabled.
[ 28.514793] MEM window: disabled.
[ 28.514797] PREFETCH window: bfd00000-bfdfffff
[ 28.514801] PCI: Bridge: 0000:00:1c.4
[ 28.514803] IO window: b000-bfff
[ 28.514808] MEM window: ff600000-ff6fffff
[ 28.514811] PREFETCH window: disabled.
[ 28.514815] PCI: Bridge: 0000:00:1c.5
[ 28.514817] IO window: a000-afff
[ 28.514821] MEM window: ff500000-ff5fffff
[ 28.514824] PREFETCH window: disabled.
[ 28.514828] PCI: Bridge: 0000:00:1e.0
[ 28.514829] IO window: disabled.
[ 28.514834] MEM window: ff700000-ff7fffff
[ 28.514837] PREFETCH window: bfe00000-bfefffff
[ 28.514849] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.514854] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 28.514869] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 28.514873] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 28.514888] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 28.514892] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 28.514907] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
[ 28.514911] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 28.514920] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 28.514928] NET: Registered protocol family 2
[ 28.563922] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 28.563990] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 28.564597] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 28.564809] TCP: Hash tables configured (established 131072 bind 65536)
[ 28.564811] TCP reno registered
[ 28.580054] checking if image is initramfs... it is
[ 29.138974] Freeing initrd memory: 7354k freed
[ 29.139429] audit: initializing netlink socket (disabled)
[ 29.139440] audit(1193187177.248:1): initialized
[ 29.139524] highmem bounce pool size: 64 pages
[ 29.141011] VFS: Disk quotas dquot_6.5.1
[ 29.141049] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 29.141121] io scheduler noop registered
[ 29.141122] io scheduler anticipatory registered
[ 29.141124] io scheduler deadline registered
[ 29.141135] io scheduler cfq registered (default)
[ 29.141148] Boot video device is 0000:00:02.0
[ 29.141306] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 29.141338] assign_interrupt_mode Found MSI capability
[ 29.141341] Allocate Port Service[0000:00:01.0:pcie00]
[ 29.141403] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 29.141439] assign_interrupt_mode Found MSI capability
[ 29.141441] Allocate Port Service[0000:00:1c.0:pcie00]
[ 29.141464] Allocate Port Service[0000:00:1c.0:pcie02]
[ 29.141530] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 29.141566] assign_interrupt_mode Found MSI capability
[ 29.141568] Allocate Port Service[0000:00:1c.4:pcie00]
[ 29.141591] Allocate Port Service[0000:00:1c.4:pcie02]
[ 29.141656] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 29.141692] assign_interrupt_mode Found MSI capability
[ 29.141694] Allocate Port Service[0000:00:1c.5:pcie00]
[ 29.141720] Allocate Port Service[0000:00:1c.5:pcie02]
[ 29.141837] isapnp: Scanning for PnP cards...
[ 29.494467] isapnp: No Plug & Play device found
[ 29.510693] Real Time Clock Driver v1.12ac
[ 29.510843] hpet_resources: 0xfed00000 is busy
[ 29.510885] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 29.510971] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.511452] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.512036] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 29.512204] input: Macintosh mouse button emulation as /class/input/input0
[ 29.512272] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 29.515151] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 29.515156] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 29.515247] mice: PS/2 mouse device common for all mice
[ 29.515327] EISA: Probing bus 0 at eisa.0
[ 29.515352] EISA: Detected 0 cards.
[ 29.515422] TCP cubic registered
[ 29.515434] NET: Registered protocol family 1
[ 29.515452] Using IPI No-Shortcut mode
[ 29.515590] Magic number: 11:164:861
[ 29.515819] Freeing unused kernel memory: 364k freed
[ 29.533860] input: AT Translated Set 2 keyboard as /class/input/input1
[ 30.693875] AppArmor: AppArmor initialized<5>audit(1193187178.748:2): type=1505 info="AppArmor initialized" pid=1253
[ 30.698656] fuse init (API version 7.8)
[ 30.702206] Failure registering capabilities with primary security module.
[ 30.729188] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - D6, should be D1 [20070126]
[ 30.729200] ACPI: SSDT 7EFA00F0, 0208 (r1 AMI CPU1PM 1 INTL 20060113)
[ 30.729542] ACPI: SSDT 7EFA0300, 013A (r1 AMI CPU2PM 1 INTL 20060113)
[ 30.729730] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 30.729739] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 31.089272] usbcore: registered new interface driver usbfs
[ 31.089291] usbcore: registered new interface driver hub
[ 31.091609] usbcore: registered new device driver usb
[ 31.113915] USB Universal Host Controller Interface driver v3.0
[ 31.113980] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 31.113991] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 31.113994] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 31.114127] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 31.114158] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880
[ 31.114258] usb usb1: configuration #1 chosen from 1 choice
[ 31.114280] hub 1-0:1.0: USB hub found
[ 31.114286] hub 1-0:1.0: 2 ports detected
[ 31.154478] SCSI subsystem initialized
[ 31.168909] libata version 2.21 loaded.
[ 31.217961] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 31.217971] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 31.217975] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 31.217996] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 31.218021] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000dc00
[ 31.218097] usb usb2: configuration #1 chosen from 1 choice
[ 31.218117] hub 2-0:1.0: USB hub found
[ 31.218122] hub 2-0:1.0: 2 ports detected
[ 31.321896] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 31.321908] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 31.321918] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 31.321936] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 31.321960] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000d400
[ 31.322033] usb usb3: configuration #1 chosen from 1 choice
[ 31.322054] hub 3-0:1.0: USB hub found
[ 31.322059] hub 3-0:1.0: 2 ports detected
[ 31.425781] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 31.425791] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 31.425796] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 31.425820] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 31.425850] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 31.425923] usb usb4: configuration #1 chosen from 1 choice
[ 31.425943] hub 4-0:1.0: USB hub found
[ 31.425948] hub 4-0:1.0: 2 ports detected
[ 31.529708] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 31.529718] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 31.529722] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 31.529747] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 31.529776] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000d800
[ 31.529850] usb usb5: configuration #1 chosen from 1 choice
[ 31.529871] hub 5-0:1.0: USB hub found
[ 31.529876] hub 5-0:1.0: 2 ports detected
[ 31.633728] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
[ 31.633737] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 31.633740] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 31.633758] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 31.633785] ehci_hcd 0000:00:1a.7: debug port 1
[ 31.633790] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 31.633794] ehci_hcd 0000:00:1a.7: irq 20, io mem 0xff9fb800
[ 31.637668] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 31.637727] usb usb6: configuration #1 chosen from 1 choice
[ 31.637751] hub 6-0:1.0: USB hub found
[ 31.637755] hub 6-0:1.0: 4 ports detected
[ 31.741578] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 31.741599] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 31.741602] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 31.741622] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 31.741648] ehci_hcd 0000:00:1d.7: debug port 1
[ 31.741654] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 31.741659] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xff9fb400
[ 31.745527] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 31.745586] usb usb7: configuration #1 chosen from 1 choice
[ 31.745608] hub 7-0:1.0: USB hub found
[ 31.745613] hub 7-0:1.0: 6 ports detected
[ 31.849439] ata_piix 0000:00:1f.2: version 2.11
[ 31.849446] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 31.849470] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 31.849507] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 31.849554] scsi0 : ata_piix
[ 31.849587] scsi1 : ata_piix
[ 31.849665] ata1: SATA max UDMA/133 cmd 0x0001e880 ctl 0x0001e802 bmdma 0x0001e080 irq 19
[ 31.849668] ata2: SATA max UDMA/133 cmd 0x0001e480 ctl 0x0001e402 bmdma 0x0001e088 irq 19
[ 32.179721] ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
[ 32.179736] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
[ 32.179759] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 32.179783] scsi2 : ata_piix
[ 32.179912] scsi3 : ata_piix
[ 32.179986] ata3: SATA max UDMA/133 cmd 0x0001d080 ctl 0x0001d002 bmdma 0x0001c800 irq 19
[ 32.179989] ata4: SATA max UDMA/133 cmd 0x0001cc00 ctl 0x0001c882 bmdma 0x0001c808 irq 19
[ 32.508841] ahci 0000:03:00.0: version 2.2
[ 32.508861] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 33.512070] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 33.512077] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 33.512085] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 33.512233] scsi4 : ahci
[ 33.512268] scsi5 : ahci
[ 33.512312] ata5: SATA max UDMA/133 cmd 0xf8890100 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 33.512316] ata6: SATA max UDMA/133 cmd 0xf8890180 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 33.823806] ata5: SATA link down (SStatus 0 SControl 300)
[ 34.139558] ata6: SATA link down (SStatus 0 SControl 300)
[ 34.140033] PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
[ 34.140039] ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 34.140070] PCI: Setting latency timer of device 0000:03:00.1 to 64
[ 34.140102] scsi6 : pata_jmicron
[ 34.140135] scsi7 : pata_jmicron
[ 34.140209] ata7: PATA max UDMA/100 cmd 0x0001bc00 ctl 0x0001b882 bmdma 0x0001b400 irq 17
[ 34.140213] ata8: PATA max UDMA/100 cmd 0x0001b800 ctl 0x0001b482 bmdma 0x0001b408 irq 17
[ 34.511498] ata7.00: ATA-7: MAXTOR STM3160812A, 3.AAK, max UDMA/100
[ 34.511503] ata7.00: 312581808 sectors, multi 0: LBA48
[ 34.511509] ata7.01: ATAPI: PIONEER DVD-RW DVR-111D, 1.06, max UDMA/66
[ 34.594662] ata7.00: configured for UDMA/100
[ 34.763590] ata7.01: configured for UDMA/66
[ 34.930373] scsi 6:0:0:0: Direct-Access ATA MAXTOR STM316081 3.AA PQ: 0 ANSI: 5
[ 34.936326] scsi 6:0:1:0: CD-ROM PIONEER DVD-RW DVR-111D 1.06 PQ: 0 ANSI: 5
[ 34.936770] ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 20 (level, low) -> IRQ 21
[ 34.986689] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ff7ff800-ff7fffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 34.986808] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 34.986826] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 34.986840] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 34.987019] eth0: RTL8168b/8111b at 0xf885e000, 00:1b:fc:36:c7:73, XID 38000000 IRQ 17
[ 34.996962] sd 6:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 34.996972] sd 6:0:0:0: [sda] Write Protect is off
[ 34.996974] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 34.996987] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.997024] sd 6:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 34.997031] sd 6:0:0:0: [sda] Write Protect is off
[ 34.997033] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 34.997045] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.997048] sda: sda1 sda2 sda3
[ 35.029476] sd 6:0:0:0: [sda] Attached SCSI disk
[ 35.032839] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 35.032853] sr 6:0:1:0: Attached scsi generic sg1 type 5
[ 35.061754] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 35.061758] Uniform CD-ROM driver Revision: 3.20
[ 35.061797] sr 6:0:1:0: Attached scsi CD-ROM sr0
[ 35.329161] Attempting manual resume
[ 35.329164] swsusp: Resume From Partition 8:2
[ 35.329165] PM: Checking swsusp image.
[ 35.329335] PM: Resume from disk failed.
[ 35.371979] kjournald starting. Commit interval 5 seconds
[ 35.371990] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.254005] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80001329df9]
[ 39.384881] Linux agpgart interface v0.102 (c) Dave Jones
[ 39.416960] agpgart: Detected an Intel 965G Chipset.
[ 39.417814] agpgart: Detected 7676K stolen memory.
[ 39.430453] agpgart: AGP aperture is 256M @ 0xd0000000
[ 39.480498] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.659129] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.665813] iTCO_vendor_support: vendor-support=0
[ 39.666611] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 39.666669] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
[ 39.666707] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.720434] input: PC Speaker as /class/input/input2
[ 39.895535] Linux video capture interface: v2.00
[ 39.961409] parport_pc 00:0a: reported by Plug and Play ACPI
[ 39.961510] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 40.012215] bttv: driver version 0.9.17 loaded
[ 40.012218] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 40.012334] bttv: Bt8xx card found (0).
[ 40.012351] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 40.012361] bttv0: Bt878 (rev 17) at 0000:05:04.0, irq: 17, latency: 64, mmio: 0xbfefe000
[ 40.012370] bttv0: detected: AverMedia AverTV DVB-T 761 [card=124], PCI subsystem ID is 1461:0761
[ 40.012372] bttv0: using: AverMedia AverTV DVB-T 761 [card=124,autodetected]
[ 40.012395] bttv0: gpio: en=00000000, out=00000000 in=009800cd [init]
[ 40.012740] bttv0: using tuner=-1
[ 40.012767] bttv0: registered device video0
[ 40.012789] bttv0: registered device vbi0
[ 40.012809] bttv0: PLL: 28636363 => 35468950 .. ok
[ 40.042962] bttv0: add subdevice "dvb0"
[ 40.050412] input: bttv IR (card=124) as /class/input/input3
[ 40.063653] bt878: AUDIO driver version 0.0.0 loaded
[ 40.063701] bt878: Bt878 AUDIO function found (0).
[ 40.063718] ACPI: PCI Interrupt 0000:05:04.1[A] -> GSI 17 (level, low) -> IRQ 17
[ 40.063723] bt878_probe: card id=[0x7611461],[ AverMedia AverTV DVB-T 761 ] has DVB functions.
[ 40.063730] bt878(0): Bt878 (rev 17) at 05:04.1, irq: 17, latency: 64, memory: 0xbfeff000
[ 40.076908] DVB: registering new adapter (bttv0).
[ 40.117890] DVB: registering frontend 0 (Spase SP887x DVB-T)...
[ 40.251626] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 40.251642] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 40.595132] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[ 40.730388] lp0: using parport0 (interrupt-driven).
[ 40.782110] Adding 714884k swap on /dev/sda2. Priority:-1 extents:1 across:714884k
[ 41.042765] EXT3 FS on sda1, internal journal
[ 41.472329] kjournald starting. Commit interval 5 seconds
[ 41.472568] EXT3 FS on sda3, internal journal
[ 41.472574] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.102863] No dock devices found.
[ 42.212559] input: Power Button (FF) as /class/input/input5
[ 42.212577] ACPI: Power Button (FF) [PWRF]
[ 42.212674] input: Power Button (CM) as /class/input/input6
[ 42.212685] ACPI: Power Button (CM) [PWRB]
[ 43.152426] r8169: eth0: link up
[ 43.152435] r8169: eth0: link up
[ 44.215996] ppdev: user-space parallel port driver
[ 44.531325] audit(1193187192.825:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5208 profile="/usr/sbin/cupsd"
[ 44.589242] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 44.589245] apm: disabled - APM is not SMP safe.
[ 45.678539] Failure registering capabilities with primary security module.
[ 45.808734] [drm] Initialized drm 1.1.0 20060810
[ 45.849540] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 45.849579] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 45.977374] Bluetooth: Core ver 2.11
[ 45.977418] NET: Registered protocol family 31
[ 45.977420] Bluetooth: HCI device and connection manager initialized
[ 45.977422] Bluetooth: HCI socket layer initialized
[ 46.008659] Bluetooth: L2CAP ver 2.8
[ 46.008662] Bluetooth: L2CAP socket layer initialized
[ 46.077121] Bluetooth: RFCOMM socket layer initialized
[ 46.077320] Bluetooth: RFCOMM TTY layer initialized
[ 46.077323] Bluetooth: RFCOMM ver 1.8
[ 46.684072] NET: Registered protocol family 10
[ 46.684152] lo: Disabled Privacy Extensions
[ 50.613871] NET: Registered protocol family 17
[ 65.219182] eth0: no IPv6 routers present
[ 72.740372] NET: Registered protocol family 4
[ 72.792021] NET: Registered protocol family 3
[ 72.805011] NET: Registered protocol family 5
[ 117.285780] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 117.375984] sp887x: no firmware upload (timeout or file not found?)
[ 200.619245] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 200.620797] sp887x: no firmware upload (timeout or file not found?)
[ 264.073084] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 264.076584] sp887x: no firmware upload (timeout or file not found?)
[ 783.313161] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 783.314780] sp887x: no firmware upload (timeout or file not found?)
[ 881.228517] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 881.230409] sp887x: no firmware upload (timeout or file not found?)
[ 1201.078697] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 1201.080363] sp887x: no firmware upload (timeout or file not found?)
[ 1221.291678] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 1221.293410] sp887x: no firmware upload (timeout or file not found?)
[ 1400.372929] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 1400.374623] sp887x: no firmware upload (timeout or file not found?)
[ 1450.316895] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 1450.319348] sp887x: no firmware upload (timeout or file not found?)
[ 1655.944578] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 1655.947212] sp887x: no firmware upload (timeout or file not found?)
[ 2281.286005] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 2281.288438] sp887x: no firmware upload (timeout or file not found?)
[ 2471.398411] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 2471.400109] sp887x: no firmware upload (timeout or file not found?)
[ 3195.210811] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[ 3195.212650] sp887x: no firmware upload (timeout or file not found?)
[15221.444440] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[15221.446187] sp887x: no firmware upload (timeout or file not found?)
[15750.997589] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[15750.999132] sp887x: no firmware upload (timeout or file not found?)
[15840.463387] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[15840.464953] sp887x: no firmware upload (timeout or file not found?)
[16015.761124] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[16015.762794] sp887x: no firmware upload (timeout or file not found?)
[16813.375165] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[16813.376815] sp887x: no firmware upload (timeout or file not found?)
[17084.157390] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[17084.159108] sp887x: no firmware upload (timeout or file not found?)
[17210.135320] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[17210.136963] sp887x: no firmware upload (timeout or file not found?)
[18223.792123] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[18223.794075] sp887x: no firmware upload (timeout or file not found?)
[18443.677789] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[18443.679437] sp887x: no firmware upload (timeout or file not found?)
[18701.133178] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[18701.134889] sp887x: no firmware upload (timeout or file not found?)
[18745.336580] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[18745.338329] sp887x: no firmware upload (timeout or file not found?)
[19095.908814] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[19095.910430] sp887x: no firmware upload (timeout or file not found?)
[19165.258074] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[19165.259756] sp887x: no firmware upload (timeout or file not found?)
[19335.509480] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[19335.511036] sp887x: no firmware upload (timeout or file not found?)
[19650.865397] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[19650.867108] sp887x: no firmware upload (timeout or file not found?)
[19690.120886] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[19690.122537] sp887x: no firmware upload (timeout or file not found?)
[19900.280100] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[19900.281838] sp887x: no firmware upload (timeout or file not found?)
[20537.727357] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[20537.729118] sp887x: no firmware upload (timeout or file not found?)
[20823.580724] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[20823.582369] sp887x: no firmware upload (timeout or file not found?)
[21104.032125] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[21104.033818] sp887x: no firmware upload (timeout or file not found?)
[22003.334463] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[22003.336210] sp887x: no firmware upload (timeout or file not found?)
[24191.644090] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[24191.645784] sp887x: no firmware upload (timeout or file not found?)
[24230.617522] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[24230.619123] sp887x: no firmware upload (timeout or file not found?)
[24751.456142] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[24751.457786] sp887x: no firmware upload (timeout or file not found?)
[24803.323832] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[24803.325756] sp887x: no firmware upload (timeout or file not found?)
[24845.125138] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[24845.126777] sp887x: no firmware upload (timeout or file not found?)
[24868.331438] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[24868.333095] sp887x: no firmware upload (timeout or file not found?)
[24976.442734] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[24976.444401] sp887x: no firmware upload (timeout or file not found?)
[25001.228810] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[25001.230673] sp887x: no firmware upload (timeout or file not found?)
[25616.677082] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[25616.678693] sp887x: no firmware upload (timeout or file not found?)
[26213.325355] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[26213.326928] sp887x: no firmware upload (timeout or file not found?)
[26642.159944] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[26642.161689] sp887x: no firmware upload (timeout or file not found?)
[26821.819055] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[26821.820590] sp887x: no firmware upload (timeout or file not found?)
[27023.500411] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[27023.502219] sp887x: no firmware upload (timeout or file not found?)
[32453.765155] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[32453.766848] sp887x: no firmware upload (timeout or file not found?)
[32500.447557] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[32500.449187] sp887x: no firmware upload (timeout or file not found?)
[32964.769090] sp887x: waiting for firmware upload (dvb-fe-sp887x.fw)...
[32964.770619] sp887x: no firmware upload (timeout or file not found?)