10.0.1.35> online
10.0.1.35> Use of uninitialized value in concatenation (.) or string at send_status.pl line 17.
10.0.1.35> Starting log server..
10.0.1.35> itions information...OK
^[[A
10.0.1.35> Writing partition table for sdb using sfdisk...OK
10.0.1.35> Cleaning hard drive...OK
10.0.1.35> Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
10.0.1.35> Building a new DOS disklabel with disk identifier 0x5d79abd3.
10.0.1.35> Changes will remain in memory only, until you decide to write them.
10.0.1.35> After that, of course, the previous content won't be recoverable.
10.0.1.35>
10.0.1.35>
10.0.1.35> The number of cylinders for this disk is set to 1116.
10.0.1.35> There is nothing wrong with that, but this is larger than 1024,
10.0.1.35> and could in certain setups cause problems with:
10.0.1.35> 1) software that runs at boot time (e.g., old versions of LILO)
10.0.1.35> 2) booting and partitioning software from other OSs
10.0.1.35> (e.g., DOS FDISK, OS/2 FDISK)
10.0.1.35> Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
10.0.1.35>
exec lsmod
10.0.1.35> Command (m for help): 0
10.0.1.35> ide_core 99396 3 piix,ide_cd,ide_disk
10.0.1.35> af_packet 17960 0
10.0.1.35> eepro100 28432 0
10.0.1.35> mii 5376 1 eepro100
10.0.1.35> usbkbd 6304 0
10.0.1.35> uhci_hcd 22736 0
10.0.1.35> usbcore 113928 3 usbkbd,uhci_hcd
10.0.1.35> b1 as ext3...OK
10.0.1.35> - Mounting /dev/sda5 as /mnt/disk/ ......OK
10.0.1.35> - Mounting /dev/sdb1 as /mnt/disk/mnt/e ......OK
10.0.1.35> ++++++++++++++++++++++++++
10.0.1.35> rootfs on / type rootfs (rw)
10.0.1.35> /proc on /proc type proc (rw)
10.0.1.35> none on /sys type sysfs (rw)
10.0.1.35> none on /proc/bus/usb type usbfs (rw)
10.0.1.35> /dev/ram3 on /tmp/stage2 type ext2 (rw)
10.0.1.35> /dev/sda5 on /mnt/disk type ext3 (rw,data=ordered)
10.0.1.35> /dev/sdb1 on /mnt/disk/mnt/e type ext3 (rw,data=ordered)
10.0.1.35> ++++++++++++++++++++++++++
10.0.1.35> Linux copy is about to start
10.0.1.35> Server IP is 10.0.1.40
10.0.1.35> Buffers names :pipe
Total data received = 4815 Megs (11.223 Mbytes/sec); BUF :0M End of data flow
10.0.1.35> Flushing buffers
10.0.1.35> Total data received = 4817 Megs, in 3138893 packets
10.0.1.35> Elapsed time = 506.849 seconds, throughput = 9.506 Mbytes/second
10.0.1.35> Syncing disks...OK
10.0.1.35> Linux copy done.
10.0.1.35> Creating excluded directories
10.0.1.35> - Removing duplicated dhcp cache
10.0.1.35> - Writing modprobe.conf
10.0.1.35> ********************
10.0.1.35> install scsi_hostadapter /sbin/modprobe aic7xxx; /sbin/modprobe ata_piix; /bin/true
10.0.1.35> alias eth0 eepro100
10.0.1.35> alias eth1 eepro100
10.0.1.35> ********************
10.0.1.35> - Remove ude network rules
10.0.1.35> removed `/mnt/disk/etc/udev/rules.d/61-net_config.rules'
10.0.1.35> - Running mkinitrd
10.0.1.35> Looking for default grub menu
10.0.1.35> /boot/initrd-
10.0.1.35> usage: mkinitrd [--version] [-v] [-f] [--preload <module>] [--with=<module>]
10.0.1.35> [--omit-scsi-modules] [--omit-raid-modules] [--omit-ide-modules]
10.0.1.35> [--image-version] [--fstab=<fstab>] [--nocompress]
10.0.1.35> [--builtin=<module>] [--nopivot] [--noudev] [--allow-missing]
10.0.1.35> [--tmpdir=<tmpdir>] [--initrdfs=<fs>] [--noresume] [--noresume2]
10.0.1.35> [--dsdt[=<dsdt.aml>]] [--lvm-version=<1|2>] [--force-usb]
10.0.1.35> [--force-evms] [--debug-busybox=<start|modload|pivot|exit>]
10.0.1.35> <initrd-image> <kernel-version>
10.0.1.35>
10.0.1.35> (ex: mkinitrd /boot/initrd-2.6.22.9-desktop586-1mdv.img 2.6.22.9-desktop586-1mdv)
10.0.1.35> Format of install_device not recognized.
10.0.1.35> Usage: grub-install [OPTION] install_device
10.0.1.35> Install GRUB on your drive.
10.0.1.35>
10.0.1.35> -h, --help print this message and exit
10.0.1.35> -v, --version print the version information and exit
10.0.1.35> --root-directory=DIR install GRUB images under the directory DIR
10.0.1.35> instead of the root directory
10.0.1.35> --grub-shell=FILE use FILE as the grub shell
10.0.1.35> --no-floppy do not probe any floppy drive
10.0.1.35> --force-lba force GRUB to use LBA mode even for a buggy
10.0.1.35> BIOS
10.0.1.35> --recheck probe a device map even if it already exists
10.0.1.35> This flag is unreliable and its use is
10.0.1.35> strongly discouraged.
10.0.1.35>
10.0.1.35> INSTALL_DEVICE can be a GRUB device name or a system device filename.
10.0.1.35>
10.0.1.35> grub-install copies GRUB images into the DIR/boot directory specfied by
10.0.1.35> --root-directory, and uses the grub shell to install grub into the boot
10.0.1.35> sector.
10.0.1.35>
10.0.1.35> Report bugs to <bug-grub@gnu.org>.
10.0.1.35> umount: /mnt/disk/dev: not mounted
10.0.1.35> Umounting /dev/sdb1...OK
10.0.1.35> Umounting /dev/sda5...OK
10.0.1.35> AUTH not understood
10.0.1.35> Local directory now /tmp