rendered paste body[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5030
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F69B0 checksum 0
[ 0.000000] ACPI: RSDP 000F69B0, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT 3FFF30C0, 48A2 (r1 NVIDIA AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 3FFF0000, 0040
[ 0.000000] ACPI: APIC 3FFF7980, 005A (r1 Nvidia AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Built 1 zonelists. Total pages: 260081
[ 0.000000] Kernel command line: root=UUID=96f99c28-38c2-42b4-9bc0-759edf703531 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2009.792 MHz processor.
[ 20.192416] spurious 8259A interrupt: IRQ7.
[ 20.195108] Console: colour VGA+ 80x25
[ 20.195725] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 20.196200] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.218692] Memory: 1027624k/1048512k available (2015k kernel code, 20200k reserved, 916k data, 364k init, 131008k highmem)
[ 20.218703] virtual kernel memory layout:
[ 20.218704] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 20.218705] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 20.218706] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 20.218708] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 20.218709] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 20.218710] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 20.218711] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 20.218714] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 20.218754] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 20.298698] Calibrating delay using timer specific routine.. 4022.13 BogoMIPS (lpj=8044274)
[ 20.298729] Security Framework v1.0.0 initialized
[ 20.298739] SELinux: Disabled at boot.
[ 20.298752] Mount-cache hash table entries: 512
[ 20.298891] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
[ 20.298899] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 20.298902] CPU: L2 Cache: 512K (64 bytes/line)
[ 20.298905] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000410 00000000 00000000 00000000
[ 20.298916] Compat vDSO mapped to ffffe000.
[ 20.298930] Checking 'hlt' instruction... OK.
[ 20.314838] SMP alternatives: switching to UP code
[ 20.315081] Freeing SMP alternatives: 11k freed
[ 20.315370] Early unpacking initramfs... done
[ 20.615799] ACPI: Core revision 20070126
[ 20.615862] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 20.618177] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
[ 20.618191] Total of 1 processors activated (4022.13 BogoMIPS).
[ 20.618305] ENABLING IO-APIC IRQs
[ 20.618468] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 20.762309] Brought up 1 CPUs
[ 20.762400] Booting paravirtualized kernel on bare hardware
[ 20.762441] Time: 23:57:46 Date: 09/21/107
[ 20.762459] NET: Registered protocol family 16
[ 20.762529] EISA bus registered
[ 20.762537] ACPI: bus type pci registered
[ 20.791065] PCI: PCI BIOS revision 2.10 entry at 0xfb440, last bus=2
[ 20.791067] PCI: Using configuration type 1
[ 20.791069] Setting up standard PCI resources
[ 20.797087] ACPI: EC: Look up EC in DSDT
[ 20.801777] ACPI: Interpreter enabled
[ 20.801779] ACPI: (supports S0 S1 S4 S5)
[ 20.801791] ACPI: Using IOAPIC for interrupt routing
[ 20.809674] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.809680] PCI: Probing PCI hardware (bus 00)
[ 20.810147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.810315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 20.810563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 20.853227] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 20.853364] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 20.853504] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.853638] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.853773] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 20.853907] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 20.854041] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 20.854175] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.854314] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.854449] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 20.854583] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.854719] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 20.854857] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 20.854993] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.855127] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.855261] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.855401] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 20.855542] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 20.855658] ACPI: PCI Interrupt Link [APC1] (IRQs *16)
[ 20.855759] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[ 20.855860] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[ 20.855961] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 20.856062] ACPI: PCI Interrupt Link [APC5] (IRQs *16)
[ 20.856208] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 20.856353] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 20.856498] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 20.856648] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 20.856794] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 20.856939] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 20.857042] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[ 20.857185] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 20.857330] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 20.857476] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 20.857621] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 20.857771] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
[ 20.857922] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0
[ 20.858028] ACPI: Power Resource [ISAV] (on)
[ 20.858044] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.858056] pnp: PnP ACPI init
[ 20.858063] ACPI: bus type pnp registered
[ 20.862017] pnp: PnP ACPI: found 14 devices
[ 20.862019] ACPI: ACPI bus type pnp unregistered
[ 20.862022] PnPBIOS: Disabled by ACPI PNP
[ 20.862066] PCI: Using ACPI for IRQ routing
[ 20.862070] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 20.871735] NET: Registered protocol family 8
[ 20.871737] NET: Registered protocol family 20
[ 20.871788] pnp: 00:00: ioport range 0x1000-0x107f has been reserved
[ 20.871791] pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
[ 20.871793] pnp: 00:00: ioport range 0x1400-0x147f has been reserved
[ 20.871796] pnp: 00:00: ioport range 0x1480-0x14ff has been reserved
[ 20.871799] pnp: 00:00: ioport range 0x1800-0x187f has been reserved
[ 20.871802] pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
[ 20.871806] pnp: 00:01: iomem range 0xf0000-0xf3fff could not be reserved
[ 20.871809] pnp: 00:01: iomem range 0xf4000-0xf7fff could not be reserved
[ 20.871812] pnp: 00:01: iomem range 0xf8000-0xfbfff could not be reserved
[ 20.871815] pnp: 00:01: iomem range 0xfc000-0xfffff could not be reserved
[ 20.874175] Time: tsc clocksource has been installed.
[ 20.902026] PCI: Bridge: 0000:00:0b.0
[ 20.902028] IO window: disabled.
[ 20.902032] MEM window: f8000000-faffffff
[ 20.902035] PREFETCH window: e0000000-efffffff
[ 20.902039] PCI: Bridge: 0000:00:0e.0
[ 20.902041] IO window: a000-afff
[ 20.902044] MEM window: fb000000-fbffffff
[ 20.902046] PREFETCH window: disabled.
[ 20.902056] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 20.902069] NET: Registered protocol family 2
[ 20.938170] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 20.938350] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 20.940017] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 20.940516] TCP: Hash tables configured (established 131072 bind 65536)
[ 20.940519] TCP reno registered
[ 20.950233] checking if image is initramfs... it is
[ 21.401695] Switched to high resolution mode on CPU 0
[ 21.538966] Freeing initrd memory: 7333k freed
[ 21.539297] audit: initializing netlink socket (disabled)
[ 21.539309] audit(1193011066.056:1): initialized
[ 21.539365] highmem bounce pool size: 64 pages
[ 21.540761] VFS: Disk quotas dquot_6.5.1
[ 21.540801] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.540886] io scheduler noop registered
[ 21.540888] io scheduler anticipatory registered
[ 21.540889] io scheduler deadline registered
[ 21.540901] io scheduler cfq registered (default)
[ 21.569466] Boot video device is 0000:01:00.0
[ 21.569581] isapnp: Scanning for PnP cards...
[ 21.922970] isapnp: No Plug & Play device found
[ 21.940760] Real Time Clock Driver v1.12ac
[ 21.940853] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 21.940932] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.941048] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 21.941459] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 21.941629] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 21.942168] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 21.942346] input: Macintosh mouse button emulation as /class/input/input0
[ 21.942404] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 21.945767] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.945772] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.945901] mice: PS/2 mouse device common for all mice
[ 21.945983] EISA: Probing bus 0 at eisa.0
[ 21.945990] Cannot allocate resource for EISA slot 1
[ 21.945993] Cannot allocate resource for EISA slot 2
[ 21.946006] EISA: Detected 0 cards.
[ 21.946092] TCP cubic registered
[ 21.946104] NET: Registered protocol family 1
[ 21.946129] Using IPI No-Shortcut mode
[ 21.946268] Magic number: 11:486:1010
[ 21.946732] Freeing unused kernel memory: 364k freed
[ 22.017037] input: AT Translated Set 2 keyboard as /class/input/input1
[ 23.153708] AppArmor: AppArmor initialized<5>audit(1193011067.556:2): type=1505 info="AppArmor initialized" pid=1232
[ 23.159901] fuse init (API version 7.8)
[ 23.164407] Failure registering capabilities with primary security module.
[ 23.727745] usbcore: registered new interface driver usbfs
[ 23.727771] usbcore: registered new interface driver hub
[ 23.727789] usbcore: registered new device driver usb
[ 23.728360] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 23.728655] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 23.728663] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
[ 23.728674] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 23.728677] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 23.728825] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 23.728840] ohci_hcd 0000:00:02.0: irq 16, io mem 0xfc003000
[ 23.761135] SCSI subsystem initialized
[ 23.765123] libata version 2.21 loaded.
[ 23.789613] usb usb1: configuration #1 chosen from 1 choice
[ 23.789638] hub 1-0:1.0: USB hub found
[ 23.789649] hub 1-0:1.0: 4 ports detected
[ 23.891436] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 23.891446] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
[ 23.891459] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 23.891462] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 23.891483] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 23.891498] ohci_hcd 0000:00:02.1: irq 17, io mem 0xfc004000
[ 23.949049] usb usb2: configuration #1 chosen from 1 choice
[ 23.949078] hub 2-0:1.0: USB hub found
[ 23.949088] hub 2-0:1.0: 4 ports detected
[ 24.056472] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 24.056478] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 24.056958] NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
[ 24.057043] NFORCE3-250: chipset revision 162
[ 24.057045] NFORCE3-250: not 100% native mode: will probe irqs later
[ 24.057049] NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
[ 24.057051] NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
[ 24.057055] NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
[ 24.057062] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 24.057073] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 24.057080] Probing IDE interface ide0...
[ 24.194690] usb 1-4: new low speed USB device using ohci_hcd and address 2
[ 24.342609] hda: Maxtor 6L200P0, ATA DISK drive
[ 24.411972] usb 1-4: configuration #1 chosen from 1 choice
[ 24.426491] usbcore: registered new interface driver hiddev
[ 24.441213] input: Silitek USB Keyboard as /class/input/input2
[ 24.441227] input: USB HID v1.00 Keyboard [Silitek USB Keyboard ] on usb-0000:00:02.0-4
[ 24.458984] input: Silitek USB Keyboard as /class/input/input3
[ 24.459108] input,hiddev96: USB HID v1.00 Device [Silitek USB Keyboard ] on usb-0000:00:02.0-4
[ 24.459118] usbcore: registered new interface driver usbhid
[ 24.459121] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 24.622322] hdb: WDC WD1200JB-00DUA3, ATA DISK drive
[ 24.683194] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 24.720719] Probing IDE interface ide1...
[ 25.453443] hdc: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive
[ 26.124798] ide1 at 0x170-0x177,0x376 on irq 15
[ 26.126553] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 26.126561] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
[ 26.126571] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 26.126574] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 26.126696] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 26.126722] ehci_hcd 0000:00:02.2: debug port 1
[ 26.126725] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 26.126733] ehci_hcd 0000:00:02.2: irq 18, io mem 0xfc005000
[ 26.126738] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 26.126763] usb 1-4: USB disconnect, address 2
[ 26.127019] usb usb3: configuration #1 chosen from 1 choice
[ 26.127136] hub 3-0:1.0: USB hub found
[ 26.127145] hub 3-0:1.0: 8 ports detected
[ 26.134549] hda: max request size: 512KiB
[ 26.145843] hda: Host Protected Area detected.
[ 26.145845] current capacity is 398294975 sectors (203927 MB)
[ 26.145847] native capacity is 398297088 sectors (203928 MB)
[ 26.168181] hda: Host Protected Area disabled.
[ 26.168187] hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133)
[ 26.169740] hda: cache flushes supported
[ 26.169778] hda: hda1 hda2 < hda5 >
[ 26.204332] hdb: max request size: 512KiB
[ 26.228712] sata_nv 0000:00:0a.0: version 3.4
[ 26.229050] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 26.229054] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 16
[ 26.229093] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 26.229156] scsi0 : sata_nv
[ 26.229188] scsi1 : sata_nv
[ 26.229234] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001dc00 irq 16
[ 26.229237] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001dc08 irq 16
[ 26.266855] hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[ 26.268374] hdb: cache flushes supported
[ 26.268409] hdb: hdb1
[ 26.309488] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
[ 26.309496] Uniform CD-ROM driver Revision: 3.20
[ 26.540235] ata1: SATA link down (SStatus 0 SControl 300)
[ 26.540245] ata1: EH pending after completion, repeating EH (cnt=4)
[ 26.710325] Attempting manual resume
[ 26.710328] swsusp: Resume From Partition 3:5
[ 26.710330] PM: Checking swsusp image.
[ 26.710468] PM: Resume from disk failed.
[ 26.724182] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 26.724186] EXT3-fs: write access will be enabled during recovery.
[ 26.748013] usb 1-4: new low speed USB device using ohci_hcd and address 3
[ 26.851910] ata2: SATA link down (SStatus 0 SControl 300)
[ 26.851920] ata2: EH pending after completion, repeating EH (cnt=4)
[ 26.965439] usb 1-4: configuration #1 chosen from 1 choice
[ 26.977554] input: Silitek USB Keyboard as /class/input/input4
[ 26.977568] input: USB HID v1.00 Keyboard [Silitek USB Keyboard ] on usb-0000:00:02.0-4
[ 26.995382] input: Silitek USB Keyboard as /class/input/input5
[ 26.995420] input,hiddev96: USB HID v1.00 Device [Silitek USB Keyboard ] on usb-0000:00:02.0-4
[ 27.281551] kjournald starting. Commit interval 5 seconds
[ 27.281566] EXT3-fs: recovery complete.
[ 27.281883] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.206664] Linux agpgart interface v0.102 (c) Dave Jones
[ 34.258485] agpgart: Detected AGP bridge 0
[ 34.258500] agpgart: Setting up Nforce3 AGP.
[ 34.262417] agpgart: AGP aperture is 128M @ 0xf0000000
[ 34.284075] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 34.284129] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000
[ 34.814714] usbcore: registered new interface driver xpad
[ 34.814719] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 35.148523] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 35.149899] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 35.803898] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 35.803908] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 19
[ 35.809804] input: ImPS/2 Generic Wheel Mouse as /class/input/input6
[ 35.822650] parport_pc 00:0a: reported by Plug and Play ACPI
[ 35.822690] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 35.824189] input: PC Speaker as /class/input/input7
[ 35.883648] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[ 35.883654] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17
[ 35.883677] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 35.889659] ieee80211_init: failed to initialize WME (err=-17)
[ 35.903155] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister
[ 35.903190] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put
[ 35.903219] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get
[ 35.903264] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register
[ 35.903632] wmaster0: Selected rate control algorithm 'simple'
[ 36.206078] intel8x0_measure_ac97_clock: measured 54659 usecs
[ 36.206082] intel8x0: clocking to 46990
[ 36.206969] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 36.206978] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 20
[ 36.746768] lp0: using parport0 (interrupt-driven).
[ 36.792043] Adding 3028212k swap on /dev/hda5. Priority:-1 extents:1 across:3028212k
[ 37.097509] EXT3 FS on hda1, internal journal
[ 37.884722] No dock devices found.
[ 37.957283] input: Power Button (FF) as /class/input/input8
[ 37.961541] ACPI: Power Button (FF) [PWRF]
[ 37.994253] input: Power Button (CM) as /class/input/input9
[ 37.998440] ACPI: Power Button (CM) [PWRB]
[ 38.309360] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
[ 38.309397] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2
[ 38.309400] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6
[ 38.309402] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 39.333757] ppdev: user-space parallel port driver
[ 39.512085] audit(1193011084.713:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4861 profile="/usr/sbin/cupsd"
[ 39.597436] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 39.597441] apm: overridden by ACPI.
[ 39.797265] Failure registering capabilities with primary security module.
[ 39.999837] Bluetooth: Core ver 2.11
[ 40.000143] NET: Registered protocol family 31
[ 40.000146] Bluetooth: HCI device and connection manager initialized
[ 40.000149] Bluetooth: HCI socket layer initialized
[ 40.017912] Bluetooth: L2CAP ver 2.8
[ 40.017916] Bluetooth: L2CAP socket layer initialized
[ 40.078172] Bluetooth: RFCOMM socket layer initialized
[ 40.078471] Bluetooth: RFCOMM TTY layer initialized
[ 40.078474] Bluetooth: RFCOMM ver 1.8
[ 20.736000] Marking TSC unstable due to: cpufreq changes.
[ 20.740000] Time: acpi_pm clocksource has been installed.
[ 22.580000] Clocksource tsc unstable (delta = -249995324 ns)
[ 44.720000] NET: Registered protocol family 17
[ 45.840000] wlan0: Initial auth_alg=1
[ 45.840000] wlan0: authenticate with AP 00:16:0a:09:29:59
[ 45.848000] wlan0: RX authentication from 00:16:0a:09:29:59 (alg=1 transaction=2 status=0)
[ 45.848000] wlan0: replying to auth challenge
[ 45.848000] wlan0: RX authentication from 00:16:0a:09:29:59 (alg=1 transaction=4 status=0)
[ 45.848000] wlan0: authenticated
[ 45.848000] wlan0: associate with AP 00:16:0a:09:29:59
[ 45.852000] wlan0: RX AssocResp from 00:16:0a:09:29:59 (capab=0x451 status=0 aid=4)
[ 45.852000] wlan0: associated
[ 52.084000] NET: Registered protocol family 10
[ 52.088000] lo: Disabled Privacy Extensions
[ 52.164000] wlan0: duplicate address detected!