rendered paste body[ 32.317512] ivtv: ==================== START INIT IVTV ====================
[ 32.317520] ivtv: version 1.0.0 (2.6.22-14-generic SMP mod_unload 586 ) loading
[ 32.317801] ivtv0: Autodetected Hauppauge card (cx23416 based)
[ 32.317878] PCI: Enabling device 0000:02:0a.0 (0014 -> 0016)
[ 32.317907] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 19
[ 32.317924] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 32.727440] input: PC Speaker as /class/input/input4
[ 32.884350] nvidia: module license 'NVIDIA' taints kernel.
[ 33.000565] lirc_dev: IR Remote Control driver registered, at major 61
[ 33.036190]
[ 33.036194] lirc_mceusb2: Philips eHome USB IR Transciever and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.33 $
[ 33.036201] lirc_mceusb2: Daniel Melander <lirc@rajidae.se>, Martin Blatter <martin_a_blatter@yahoo.com>
[ 33.223187] usb 1-1: reset full speed USB device using uhci_hcd and address 2
[ 33.329192] ivtv0: loaded v4l-cx2341x-enc.fw firmware (3782571960 bytes)
[ 33.374892] lirc_dev: lirc_register_plugin: sample_rate: 0
[ 33.379205] lirc_mceusb2[2]: Topseed eHome Infrared Transceiver on usb1:2
[ 33.379314] usbcore: registered new interface driver xpad
[ 33.379326] /build/buildd/linux-source-2.6.22-2.6.22/drivers/input/joystick/xpad.c: driver for Xbox controllers v0.1.6
[ 33.380489] usbcore: registered new interface driver lirc_mceusb2
[ 33.543132] ivtv0: Encoder revision: 0x02050032
[ 33.543139] ivtv0: Recommended firmware version is 0x02060039.
[ 33.625054] tveeprom 0-0050: Hauppauge model 26582, rev F0B2, serial# 10141138
[ 33.625063] tveeprom 0-0050: tuner model is TCL M2523_5N_E (idx 112, type 50)
[ 33.625069] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08)
[ 33.625074] tveeprom 0-0050: audio processor is CX25843 (idx 37)
[ 33.625078] tveeprom 0-0050: decoder processor is CX25843 (idx 30)
[ 33.625082] tveeprom 0-0050: has no radio, has no IR receiver, has no IR transmitter
[ 33.625090] ivtv0: Autodetected Hauppauge WinTV PVR-150
[ 33.648288] bttv: driver version 0.9.17 loaded
[ 33.648296] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 33.670508] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[ 33.702781] cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
[ 36.765158] cx25840 0-0044: loaded v4l-cx25840.fw firmware (14264 bytes)
[ 36.860337] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0)
[ 36.908818] tuner 0-0061: type set to 50 (TCL 2002N)
[ 37.224579] ivtv0: Registered device video0 for encoder MPEG (4 MB)
[ 37.225421] ivtv0: Registered device video32 for encoder YUV (2 MB)
[ 37.226277] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
[ 37.226894] ivtv0: Registered device video24 for encoder PCM audio (1 MB)
[ 37.250465] ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
[ 37.250533] ivtv: ==================== END INIT IVTV ====================