rendered paste bodysmartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST3200021A
Serial Number: 4LJ2GBB3
Firmware Version: 3.01
User Capacity: 200,049,647,616 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Sun Oct 21 11:17:23 2007 VET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 051 047 006 Pre-fail Always - 34583101
3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 154
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 8
7 Seek_Error_Rate 0x000f 081 061 030 Pre-fail Always - 141371213
9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3922
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 203
194 Temperature_Celsius 0x0022 043 057 000 Old_age Always - 43
195 Hardware_ECC_Recovered 0x001a 051 047 000 Old_age Always - 34583101
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 5
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 occurred at disk power-on lifetime: 3922 hours (163 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a9 a8 f3 e4 Error: UNC at LBA = 0x04f3a8a9 = 83077289
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 a2 a8 f3 e4 00 18:18:38.169 READ DMA
27 00 00 00 00 00 e0 00 18:18:53.151 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 18:18:53.135 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 18:18:53.126 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 18:18:53.119 READ NATIVE MAX ADDRESS EXT
Error 4 occurred at disk power-on lifetime: 3922 hours (163 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a9 a8 f3 e4 Error: UNC at LBA = 0x04f3a8a9 = 83077289
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 a2 a8 f3 e4 00 18:18:38.169 READ DMA
27 00 00 00 00 00 e0 00 18:18:38.161 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 18:18:38.161 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 18:18:38.154 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 18:18:34.363 READ NATIVE MAX ADDRESS EXT
Error 3 occurred at disk power-on lifetime: 3922 hours (163 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a9 a8 f3 e4 Error: UNC at LBA = 0x04f3a8a9 = 83077289
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 a2 a8 f3 e4 00 18:18:38.169 READ DMA
27 00 00 00 00 00 e0 00 18:18:38.161 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 18:18:38.161 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 18:18:38.154 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 18:18:34.363 READ NATIVE MAX ADDRESS EXT
Error 2 occurred at disk power-on lifetime: 3922 hours (163 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a5 a8 f3 e4 Error: UNC at LBA = 0x04f3a8a5 = 83077285
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 a2 a8 f3 e4 00 18:18:22.082 READ DMA
27 00 00 00 00 00 e0 00 18:18:22.061 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 18:18:21.820 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 02 18:18:21.819 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 18:18:34.363 READ NATIVE MAX ADDRESS EXT
Error 1 occurred at disk power-on lifetime: 3922 hours (163 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a5 a8 f3 e4 Error: UNC at LBA = 0x04f3a8a5 = 83077285
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 a2 a8 f3 e4 00 18:18:22.082 READ DMA
25 00 18 ca 0a 77 e0 00 18:18:22.061 READ DMA EXT
25 00 30 7a 18 48 e0 00 18:18:21.820 READ DMA EXT
25 00 00 7a 16 48 e0 00 18:18:21.819 READ DMA EXT
c8 00 18 72 80 83 ee 00 18:18:21.817 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.