rendered paste bodyphysical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000cc000 - 00000000000d2000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
[4294667.296000] BIOS-e820: 000000000f7f0000 - 000000000f7f8000 (ACPI data)
[4294667.296000] BIOS-e820: 000000000f7f8000 - 000000000f800000 (ACPI NVS)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 247MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000fb9b0
[4294667.296000] On node 0 totalpages: 63472
[4294667.296000] DMA zone: 4096 pages, LIFO batch:1
[4294667.296000] Normal zone: 59376 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:1
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 AMI ) @ 0x000fa630
[4294667.296000] ACPI: RSDT (v001 AMIINT AMIINI09 0x00000010 MSFT 0x0100000d) @ 0x0f7f0000
[4294667.296000] ACPI: FADT (v001 AMIINT AMIINI09 0x00000011 MSFT 0x0100000d) @ 0x0f7f0030
[4294667.296000] ACPI: MADT (v001 AMIINT AMIINI09 0x00000011 MSFT 0x0100000d) @ 0x0f7f00c0
[4294667.296000] ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:3 APIC version 16
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 0f800000 (gap: 0f800000:ef400000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[4294667.296000] Detected 808.245 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.037000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294668.038000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[4294668.055000] Memory: 243588k/253888k available (1415k kernel code, 9688k reserved, 763k data, 224k init, 0k highmem)
[4294668.055000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.055000] Calibrating delay loop... 1597.44 BogoMIPS (lpj=798720)
[4294668.077000] Security Framework v1.0.0 initialized
[4294668.077000] SELinux: Disabled at boot.
[4294668.077000] Mount-cache hash table entries: 512
[4294668.077000] CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000
[4294668.077000] CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000
[4294668.077000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294668.077000] CPU: L2 Cache: 64K (64 bytes/line)
[4294668.077000] CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020 00000000 00000000 00000000
[4294668.077000] CPU: AMD Duron(tm) Processor stepping 01
[4294668.077000] Enabling fast FPU save and restore... done.
[4294668.077000] Checking 'hlt' instruction... OK.
[4294668.081000] Checking for popad bug... OK.
[4294668.081000] checking if image is initramfs... it is
[4294669.000000] Freeing initrd memory: 4824k freed
[4294669.002000] ACPI: Looking for DSDT in initrd... not found!
[4294669.132000] not found!
[4294669.146000] ENABLING IO-APIC IRQs
[4294669.147000] ..TIMER: vector=0x31 pin1=2 pin2=-1
[4294669.258000] NET: Registered protocol family 16
[4294669.258000] EISA bus registered
[4294669.258000] ACPI: bus type pci registered
[4294669.260000] PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
[4294669.260000] PCI: Using configuration type 1
[4294669.260000] mtrr: v2.0 (20020519)
[4294669.261000] ACPI: Subsystem revision 20050729
[4294669.276000] ACPI: Interpreter enabled
[4294669.276000] ACPI: Using IOAPIC for interrupt routing
[4294669.276000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294669.276000] PCI: Probing PCI hardware (bus 00)
[4294669.277000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294669.282000] Boot video device is 0000:01:00.0
[4294669.321000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294669.328000] ACPI: Power Resource [URP1] (off)
[4294669.329000] ACPI: Power Resource [URP2] (off)
[4294669.329000] ACPI: Power Resource [FDDP] (off)
[4294669.329000] ACPI: Power Resource [LPTP] (off)
[4294669.332000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294669.332000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.333000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294669.333000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294669.334000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.334000] pnp: PnP ACPI init
[4294669.343000] pnp: PnP ACPI: found 11 devices
[4294669.343000] PnPBIOS: Disabled by ACPI PNP
[4294669.343000] PCI: Using ACPI for IRQ routing
[4294669.343000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294669.353000] audit: initializing netlink socket (disabled)
[4294669.353000] audit: initialized
[4294669.353000] VFS: Disk quotas dquot_6.5.1
[4294669.353000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.353000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[4294669.353000] devfs: boot_options: 0x0
[4294669.353000] Initializing Cryptographic API
[4294669.353000] isapnp: Scanning for PnP cards...
[4294669.706000] isapnp: No Plug & Play device found
[4294669.756000] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
[4294669.756000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
[4294670.371000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.372000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.372000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294670.372000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.373000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294670.377000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.377000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294670.377000] io scheduler noop registered
[4294670.377000] io scheduler anticipatory registered
[4294670.377000] io scheduler deadline registered
[4294670.377000] io scheduler cfq registered
[4294670.378000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294670.380000] EISA: Probing bus 0 at eisa.0
[4294670.380000] EISA: Detected 0 cards.
[4294670.380000] NET: Registered protocol family 2
[4294670.390000] IP: routing cache hash table of 2048 buckets, 16Kbytes
[4294670.390000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[4294670.390000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[4294670.390000] TCP: Hash tables configured (established 8192 bind 8192)
[4294670.390000] NET: Registered protocol family 8
[4294670.390000] NET: Registered protocol family 20
[4294670.391000] ACPI wakeup devices:
[4294670.391000] PCI0 UAR1 PS2K USB USB1 AC9 MC9
[4294670.391000] ACPI: (supports S0 S1 S4 S5)
[4294670.392000] Freeing unused kernel memory: 224k freed
[4294670.477000] vga16fb: initializing
[4294670.477000] vga16fb: mapped to 0xc00a0000
[4294670.606000] Console: switching to colour frame buffer device 80x30
[4294670.606000] fb0: VGA16 VGA frame buffer device
[4294670.620000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294671.888000] Capability LSM initialized
[4294671.918000] NET: Registered protocol family 1
[4294671.953000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.953000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.953000] ACPI: bus type ide registered
[4294671.968000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[4294671.968000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[4294671.968000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
[4294671.968000] VP_IDE: chipset revision 6
[4294671.968000] VP_IDE: not 100% native mode: will probe irqs later
[4294671.968000] VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[4294671.968000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[4294671.968000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
[4294671.968000] Probing IDE interface ide0...
[4294672.352000] hda: MAXTOR 6L040L2, ATA DISK drive
[4294672.964000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294672.964000] Probing IDE interface ide1...
[4294673.483000] Probing IDE interface ide1...
[4294674.002000] Probing IDE interface ide2...
[4294674.514000] Probing IDE interface ide3...
[4294675.026000] Probing IDE interface ide4...
[4294675.538000] Probing IDE interface ide5...
[4294676.059000] hda: max request size: 128KiB
[4294676.070000] hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133)
[4294676.070000] hda: cache flushes supported
[4294676.070000] /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 >
[4294676.767000] Attempting manual resume
[4294676.767000] swsusp: Suspend partition has wrong signature?
[4294676.844000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294676.844000] 8139cp: pci dev 0000:00:0b.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[4294676.844000] 8139cp: Try the "8139too" driver instead.
[4294676.844000] 8139cp: pci dev 0000:00:13.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[4294676.844000] 8139cp: Try the "8139too" driver instead.
[4294676.848000] 8139too Fast Ethernet driver 0.9.27
[4294676.848000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
[4294676.849000] eth0: RealTek RTL8139 at 0xec00, 00:80:48:24:88:9e, IRQ 19
[4294676.849000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4294676.849000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18
[4294676.849000] eth1: RealTek RTL8139 at 0xdc00, 00:20:ed:61:c3:bc, IRQ 18
[4294676.849000] eth1: Identified 8139 chip type 'RTL-8101'
[4294676.909000] usbcore: registered new driver usbfs
[4294676.909000] usbcore: registered new driver hub
[4294676.911000] USB Universal Host Controller Interface driver v2.2
[4294676.911000] ACPI: PCI Interrupt 0000:00:11.2[D] -> GSI 21 (level, low) -> IRQ 21
[4294676.911000] PCI: Via IRQ fixup for 0000:00:11.2, from 10 to 5
[4294676.911000] uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[4294676.973000] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
[4294676.973000] uhci_hcd 0000:00:11.2: irq 21, io base 0x0000e800
[4294676.973000] hub 1-0:1.0: USB hub found
[4294676.973000] hub 1-0:1.0: 2 ports detected
[4294676.976000] ACPI: PCI Interrupt 0000:00:11.3[D] -> GSI 21 (level, low) -> IRQ 21
[4294676.976000] PCI: Via IRQ fixup for 0000:00:11.3, from 10 to 5
[4294676.976000] uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
[4294677.038000] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
[4294677.038000] uhci_hcd 0000:00:11.3: irq 21, io base 0x0000e400
[4294677.038000] hub 2-0:1.0: USB hub found
[4294677.038000] hub 2-0:1.0: 2 ports detected
[4294677.142000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[4294679.162000] usbcore: registered new driver hiddev
[4294679.180000] input: USB HID v1.10 Mouse [KYE NetScroll+ EYE] on usb-0000:00:11.2-1
[42[4294679.180000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294679.997000] ACPI: CPU0 (power states: C1[C1])
[4294679.997000] ACPI: Processor [CPU1] (supports 16 throttling states)
[4294680.246000] Attempting manual resume
[4294680.246000] swsusp: Suspend partition has wrong signature?
[4294680.278000] kjournald starting. Commit interval 5 seconds
[4294680.278000] EXT3-fs: mounted filesystem with ordered data mode.
[4294688.901000] parport: PnPBIOS parport detected.
[4294688.901000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[4294688.984000] lp0: using parport0 (interrupt-driven).
[4294689.027000] mice: PS/2 mouse device common for all mice
[4294689.185000] Adding 498004k swap on /dev/hda2. Priority:-1 extents:1
[4294689.258000] EXT3 FS on hda1, internal journal
[4294689.493000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294690.078000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294694.298000] ReiserFS: hda3: found reiserfs format "3.6" with standard journal
[4294694.301000] ReiserFS: hda3: using ordered data mode
[4294694.302000] ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[4294694.305000] ReiserFS: hda3: checking transaction log (hda3)
[4294694.306000] ReiserFS: hda3: Using r5 hash to sort names
[4294694.477000] loop: loaded (max 8 devices)
[4294694.583000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294694.644000] ISO 9660 Extensions: RRIP_1991A
[4294695.187000] eth0: link down
[4294696.238000] NET: Registered protocol family 17
[4294760.393000] Real Time Clock Driver v1.12
[4294760.433000] Generic RTC Driver v1.07
[4294762.486000] ACPI: Power Button (FF) [PWRF]
[4294762.486000] ACPI: Power Button (CM) [PWRB]
[4294762.486000] ACPI: Sleep Button (CM) [SLPB]
[4294762.686000] ibm_acpi: ec object not found
[4294763.416000] powernow: No powernow capabilities detected
[4294765.420000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294765.420000] apm: overridden by ACPI.
[4294765.464000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294765.464000] apm: disabled on user request.
[4294847.541000] NET: Registered protocol family 10
[4294847.541000] Disabled Privacy Extensions on device c02eb280(lo)
[4294847.541000] IPv6 over IPv4 tunneling driver
[4294858.262000] eth0: no IPv6 routers present
[4295314.188000] eth0: link down
[4295324.327000] eth0: no IPv6 routers present
[4295445.480000] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[4295455.729000] eth1: no IPv6 routers present
[4300800.633000] hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
[4300800.633000] hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
[4300800.633000] ide: failed opcode was: unknown
[4318771.292000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
[4318771.292000] PCI: Via IRQ fixup for 0000:00:11.5, from 10 to 6
[4318771.293000] PCI: Setting latency timer of device 0000:00:11.5 to 64