rendered paste body# aplay --list-devices
aplay: device_list:204: no soundcards found..
# lspci -vvnn
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Toshiba America Info Systems Unknown device [1179:ff01]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 21
Region 0: Memory at de300000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express Unknown type IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed unknown, Width x0
a# tail -2 /proc/asound/oss/sndstat
Mixers: NOT ENABLED IN CONFIG
# amixer
amixer: Mixer attach default error: No such device
# asoundconf list
Please note that you are attempting to run asoundconf as a privileged superuser, which may have unintended consequences.
Names of available sound cards:
# cat /etc/asound.conf ~/.asoundrc*
cat: /etc/asound.conf: No such file or directory
cat: /root/.asoundrc*: No such file or directory
# dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe80000 (usable)
[ 0.000000] BIOS-e820: 000000003fe80000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7670
[ 0.000000] Entering add_active_range(0, 0, 261760) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261760
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261760
[ 0.000000] On node 0 totalpages: 261760
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32131 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F75E0 checksum 0
[ 0.000000] ACPI: RSDP 000F75E0, 0014 (r0 TOSCPL)
[ 0.000000] ACPI: RSDT 3FE888D5, 0054 (r1 TOSCPL TOSCPL00 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3FE90C78, 0074 (r1 TOSCPL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: DSDT 3FE8A640, 6638 (r1 TOSCPL CALISTGA 6040000 INTL 20060608)
[ 0.000000] ACPI: FACS 3FE91FC0, 0040
[ 0.000000] ACPI: SLIC 3FE90CEC, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0)
[ 0.000000] ACPI: APIC 3FE90E62, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 3FE90ECA, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 3FE90F02, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: BOOT 3FE90FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: APIC 3FE90F70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: SSDT 3FE89FED, 064F (r1 SataRe SataPri 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE8995B, 0692 (r1 SataRe SataSec 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE88EB5, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE88E0F, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE88929, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 259715
[ 0.000000] Kernel command line: root=UUID=678a6be4-24c9-475c-a2e4-a1083512c7a7 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.128 MHz processor.
[ 26.959552] Console: colour VGA+ 80x25
[ 26.959877] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 26.960207] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 26.988491] Memory: 1026168k/1047040k available (2015k kernel code, 20248k reserved, 916k data, 364k init, 129536k highmem)
[ 26.988500] virtual kernel memory layout:
[ 26.988501] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 26.988502] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 26.988504] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 26.988505] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 26.988506] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 26.988507] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 26.988509] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 26.988512] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 26.988544] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 26.988694] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 26.988699] hpet0: 3 64-bit timers, 14318180 Hz
[ 27.069644] Calibrating delay using timer specific routine.. 3195.72 BogoMIPS (lpj=6391455)
[ 27.069664] Security Framework v1.0.0 initialized
[ 27.069668] SELinux: Disabled at boot.
[ 27.069681] Mount-cache hash table entries: 512
[ 27.069791] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
[ 27.069799] monitor/mwait feature present.
[ 27.069801] using mwait in idle threads.
[ 27.069805] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 27.069807] CPU: L2 cache: 2048K
[ 27.069810] CPU: Physical Processor ID: 0
[ 27.069812] CPU: Processor Core ID: 0
[ 27.069814] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001
[ 27.069822] Compat vDSO mapped to ffffe000.
[ 27.069834] Checking 'hlt' instruction... OK.
[ 27.085731] SMP alternatives: switching to UP code
[ 27.086151] Early unpacking initramfs... done
[ 27.444393] ACPI: Core revision 20070126
[ 27.444444] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 27.456734] CPU0: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06
[ 27.456751] SMP alternatives: switching to SMP code
[ 27.456836] Booting processor 1/1 eip 3000
[ 27.467068] Initializing CPU#1
[ 27.545187] Calibrating delay using timer specific routine.. 3192.04 BogoMIPS (lpj=6384091)
[ 27.545194] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e39d 00000000 00000001
[ 27.545199] monitor/mwait feature present.
[ 27.545202] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 27.545204] CPU: L2 cache: 2048K
[ 27.545206] CPU: Physical Processor ID: 0
[ 27.545208] CPU: Processor Core ID: 1
[ 27.545210] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e39d 00000000 00000001
[ 27.545763] CPU1: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06
[ 27.545787] Total of 2 processors activated (6387.77 BogoMIPS).
[ 27.545987] ENABLING IO-APIC IRQs
[ 27.546194] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 27.693143] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 27.713142] Brought up 2 CPUs
[ 27.748972] migration_cost=38
[ 27.749114] Booting paravirtualized kernel on bare hardware
[ 27.749203] Time: 2:44:30 Date: 09/19/107
[ 27.749223] NET: Registered protocol family 16
[ 27.749309] EISA bus registered
[ 27.749314] ACPI: bus type pci registered
[ 27.749434] PCI: BIOS BUG #81[49435000] found
[ 27.749505] PCI: Using configuration type 1
[ 27.749507] Setting up standard PCI resources
[ 27.754021] ACPI: EC: Look up EC in DSDT
[ 27.754757] ACPI: EC: GPE=0x19, ports=0x66, 0x62
[ 27.759453] ACPI: System BIOS is requesting _OSI(Linux)
[ 27.759455] ACPI: Please test with "acpi_osi=!Linux"
[ 27.759457] Please send dmidecode to linux-acpi@vger.kernel.org
[ 27.759770] ACPI: Interpreter enabled
[ 27.759772] ACPI: (supports S0 S3 S4 S5)
[ 27.759789] ACPI: Using IOAPIC for interrupt routing
[ 27.805917] ACPI: EC: GPE=0x19, ports=0x66, 0x62
[ 27.805976] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 27.805985] PCI: Probing PCI hardware (bus 00)
[ 27.806748] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 27.806753] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 27.808111] PCI: Transparent bridge - 0000:00:1e.0
[ 27.808269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 27.808569] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 27.808708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 27.808841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 27.808978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 27.809122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 27.815684] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 27.815791] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 27.815895] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 27.815999] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 27.816101] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 27.816205] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 27.816308] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 27.816411] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 27.816543] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 27.816553] pnp: PnP ACPI init
[ 27.816560] ACPI: bus type pnp registered
[ 27.841139] pnp: PnP ACPI: found 10 devices
[ 27.841142] ACPI: ACPI bus type pnp unregistered
[ 27.841145] PnPBIOS: Disabled by ACPI PNP
[ 27.841189] PCI: Using ACPI for IRQ routing
[ 27.841192] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 27.841312] NET: Registered protocol family 8
[ 27.841314] NET: Registered protocol family 20
[ 27.841363] pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved
[ 27.841366] pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved
[ 27.841369] pnp: 00:01: ioport range 0xff00-0xff7f has been reserved
[ 27.841372] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 27.841376] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 27.841379] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 27.841382] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 27.841390] pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 27.844908] Time: tsc clocksource has been installed.
[ 27.844922] Switched to high resolution mode on CPU 0
[ 27.845011] Switched to high resolution mode on CPU 1
[ 27.871695] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[ 27.871768] PCI: Bridge: 0000:00:01.0
[ 27.871771] IO window: 2000-2fff
[ 27.871775] MEM window: dc000000-ddffffff
[ 27.871779] PREFETCH window: c0000000-cfffffff
[ 27.871783] PCI: Bridge: 0000:00:1c.0
[ 27.871786] IO window: 3000-3fff
[ 27.871793] MEM window: d6000000-d7ffffff
[ 27.871798] PREFETCH window: d0000000-d1ffffff
[ 27.871804] PCI: Bridge: 0000:00:1c.1
[ 27.871808] IO window: 4000-4fff
[ 27.871814] MEM window: d8000000-d9ffffff
[ 27.871819] PREFETCH window: d2000000-d3ffffff
[ 27.871826] PCI: Bridge: 0000:00:1c.2
[ 27.871829] IO window: 5000-5fff
[ 27.871836] MEM window: da000000-dbffffff
[ 27.871841] PREFETCH window: d4000000-d5ffffff
[ 27.871854] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[ 27.871856] IO window: 00006000-000060ff
[ 27.871862] IO window: 00006400-000064ff
[ 27.871867] PREFETCH window: 50000000-53ffffff
[ 27.871873] MEM window: 54000000-57ffffff
[ 27.871878] PCI: Bridge: 0000:00:1e.0
[ 27.871881] IO window: 6000-6fff
[ 27.871888] MEM window: de000000-de0fffff
[ 27.871893] PREFETCH window: 50000000-53ffffff
[ 27.871911] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 27.871917] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 27.871942] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 27.871949] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 27.871974] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 27.871980] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 27.872006] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 27.872012] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 27.872027] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 27.872046] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 27.872060] NET: Registered protocol family 2
[ 27.920824] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 27.920881] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 27.921646] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 27.921934] TCP: Hash tables configured (established 131072 bind 65536)
[ 27.921937] TCP reno registered
[ 27.936962] checking if image is initramfs... it is
[ 28.641639] Freeing initrd memory: 7343k freed
[ 28.641767] Simple Boot Flag at 0x36 set to 0x1
[ 28.642318] audit: initializing netlink socket (disabled)
[ 28.642336] audit(1192761870.228:1): initialized
[ 28.642445] highmem bounce pool size: 64 pages
[ 28.644566] VFS: Disk quotas dquot_6.5.1
[ 28.644617] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 28.644719] io scheduler noop registered
[ 28.644721] io scheduler anticipatory registered
[ 28.644723] io scheduler deadline registered
[ 28.644737] io scheduler cfq registered (default)
[ 28.644847] Boot video device is 0000:01:00.0
[ 28.644938] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 28.644981] assign_interrupt_mode Found MSI capability
[ 28.644985] Allocate Port Service[0000:00:01.0:pcie00]
[ 28.645077] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 28.645139] assign_interrupt_mode Found MSI capability
[ 28.645142] Allocate Port Service[0000:00:1c.0:pcie00]
[ 28.645177] Allocate Port Service[0000:00:1c.0:pcie02]
[ 28.645284] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 28.645347] assign_interrupt_mode Found MSI capability
[ 28.645349] Allocate Port Service[0000:00:1c.1:pcie00]
[ 28.645388] Allocate Port Service[0000:00:1c.1:pcie02]
[ 28.645495] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 28.645558] assign_interrupt_mode Found MSI capability
[ 28.645560] Allocate Port Service[0000:00:1c.2:pcie00]
[ 28.645598] Allocate Port Service[0000:00:1c.2:pcie02]
[ 28.645784] isapnp: Scanning for PnP cards...
[ 28.999981] isapnp: No Plug & Play device found
[ 29.023223] Real Time Clock Driver v1.12ac
[ 29.023471] hpet_resources: 0xfed00000 is busy
[ 29.023504] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 29.024693] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 29.024830] input: Macintosh mouse button emulation as /class/input/input0
[ 29.024920] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 29.025227] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 29.025306] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 29.025310] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 29.025313] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 29.025316] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 29.025318] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 29.025512] mice: PS/2 mouse device common for all mice
[ 29.025743] EISA: Probing bus 0 at eisa.0
[ 29.025751] Cannot allocate resource for EISA slot 1
[ 29.025755] Cannot allocate resource for EISA slot 2
[ 29.025757] Cannot allocate resource for EISA slot 3
[ 29.025759] Cannot allocate resource for EISA slot 4
[ 29.025762] Cannot allocate resource for EISA slot 5
[ 29.025764] Cannot allocate resource for EISA slot 6
[ 29.025775] EISA: Detected 0 cards.
[ 29.025861] TCP cubic registered
[ 29.025875] NET: Registered protocol family 1
[ 29.025896] Using IPI No-Shortcut mode
[ 29.026054] Magic number: 11:345:713
[ 29.026384] Freeing unused kernel memory: 364k freed
[ 29.031268] input: AT Translated Set 2 keyboard as /class/input/input1
[ 30.232928] AppArmor: AppArmor initialized<5>audit(1192761871.728:2): type=1505 info="AppArmor initialized" pid=1239
[ 30.239074] fuse init (API version 7.8)
[ 30.243663] Failure registering capabilities with primary security module.
[ 30.275718] ACPI: SSDT 3FE8965B, 0238 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 30.275952] ACPI: SSDT 3FE89114, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 30.276256] Monitor-Mwait will be used to enter C-1 state
[ 30.276260] Monitor-Mwait will be used to enter C-2 state
[ 30.276263] Monitor-Mwait will be used to enter C-3 state
[ 30.276268] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 30.276530] ACPI: SSDT 3FE89893, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 30.276747] ACPI: SSDT 3FE895D6, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 30.277097] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 3.164000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.168000] Time: hpet clocksource has been installed.
[ 3.700000] SCSI subsystem initialized
[ 3.704000] libata version 2.21 loaded.
[ 3.708000] ata_piix 0000:00:1f.2: version 2.11
[ 3.708000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.720000] usbcore: registered new interface driver usbfs
[ 3.720000] usbcore: registered new interface driver hub
[ 3.720000] usbcore: registered new device driver usb
[ 3.720000] USB Universal Host Controller Interface driver v3.0
[ 3.864000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.864000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.864000] scsi0 : ata_piix
[ 3.864000] scsi1 : ata_piix
[ 3.864000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14
[ 3.864000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15
[ 4.000000] Clocksource tsc unstable (delta = -177793478 ns)
[ 4.028000] ata1.00: ATA-7: TOSHIBA MK6034GSX, AH101M, max UDMA/100
[ 4.028000] ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.036000] ata1.00: configured for UDMA/100
[ 4.356000] ata2.00: ATAPI: DVD/CDRW UJDA770, 1.60, max UDMA/33
[ 4.528000] ata2.00: configured for UDMA/33
[ 4.528000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5
[ 4.528000] scsi 1:0:0:0: CD-ROM MATSHITA DVD/CDRW UJDA770 1.60 PQ: 0 ANSI: 5
[ 4.528000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 4.528000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 4.528000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.528000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 4.528000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 4.528000] usb usb1: configuration #1 chosen from 1 choice
[ 4.528000] hub 1-0:1.0: USB hub found
[ 4.528000] hub 1-0:1.0: 2 ports detected
[ 4.540000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 4.540000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.540000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.540000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.540000] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 4.540000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.540000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.540000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.540000] sda: sda1 sda2 sda3
[ 4.580000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.580000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 4.580000] Uniform CD-ROM driver Revision: 3.20
[ 4.580000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.584000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.584000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.632000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 4.632000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 4.632000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.632000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 4.632000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 4.632000] usb usb2: configuration #1 chosen from 1 choice
[ 4.632000] hub 2-0:1.0: USB hub found
[ 4.632000] hub 2-0:1.0: 2 ports detected
[ 4.736000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 4.736000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 4.736000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.736000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 4.736000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 4.736000] usb usb3: configuration #1 chosen from 1 choice
[ 4.736000] hub 3-0:1.0: USB hub found
[ 4.736000] hub 3-0:1.0: 2 ports detected
[ 4.768000] Attempting manual resume
[ 4.768000] swsusp: Resume From Partition 8:2
[ 4.768000] PM: Checking swsusp image.
[ 4.768000] PM: Resume from disk failed.
[ 4.780000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.780000] EXT3-fs: write access will be enabled during recovery.
[ 4.840000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 4.840000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 4.840000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.840000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 4.840000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 4.840000] usb usb4: configuration #1 chosen from 1 choice
[ 4.840000] hub 4-0:1.0: USB hub found
[ 4.840000] hub 4-0:1.0: 2 ports detected
[ 4.944000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 4.944000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.944000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.944000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.944000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.944000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.944000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xde304000
[ 4.948000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.948000] usb usb5: configuration #1 chosen from 1 choice
[ 4.948000] hub 5-0:1.0: USB hub found
[ 4.948000] hub 5-0:1.0: 8 ports detected
[ 5.052000] ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 5.100000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[de005000-de0057ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.100000] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 5.100000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 5.100000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 5.100000] eth0: RTL8101e at 0xf8882000, 00:16:d4:94:8f:77, XID 34000000 IRQ 18
[ 5.688000] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 5.864000] usb 4-1: configuration #1 chosen from 1 choice
[ 9.220000] kjournald starting. Commit interval 5 seconds
[ 9.220000] EXT3-fs: sda3: orphan cleanup on readonly fs
[ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5963992
[ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5964006
[ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5963968
[ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5963985
[ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5963975
[ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5963977
[ 9.220000] ext3_orphan_cleanup: deleting unreferenced inode 5963989
[ 9.220000] EXT3-fs: sda3: 7 orphan inodes deleted
[ 9.220000] EXT3-fs: recovery complete.
[ 9.284000] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.308000] Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00]
[ 16.308000] Yenta: Enabling burst memory read transactions
[ 16.308000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 16.308000] Yenta: Routing CardBus interrupts to PCI
[ 16.308000] Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x64
[ 16.312000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.344000] iTCO_vendor_support: vendor-support=0
[ 16.348000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 16.348000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 16.348000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.360000] intel_rng: FWH not detected
[ 16.512000] Linux agpgart interface v0.102 (c) Dave Jones
[ 16.536000] sdhci: Secure Digital Host Controller Interface driver
[ 16.536000] sdhci: Copyright(c) Pierre Ossman
[ 16.560000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 16.560000] Socket status: 30000006
[ 16.560000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[ 16.560000] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 16.560000] cs: IO port probe 0x6000-0x6fff: clean.
[ 16.560000] pcmcia: parent PCI bridge Memory window: 0xde000000 - 0xde0fffff
[ 16.560000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 16.560000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.560000] ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 16.560000] sdhci: SDHCI controller found at 0000:06:04.3 [104c:803c] (rev 0)
[ 16.560000] ACPI: PCI Interrupt 0000:06:04.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 16.560000] mmc0: SDHCI at 0xde005800 irq 19 DMA
[ 16.792000] ieee80211_crypt: registered algorithm 'NULL'
[ 16.808000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 16.808000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 16.856000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[ 16.856000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 16.860000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 16.860000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 16.860000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 16.952000] cs: IO port probe 0x100-0x3af: clean.
[ 16.956000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 16.956000] cs: IO port probe 0x820-0x8ff: clean.
[ 16.956000] cs: IO port probe 0xc00-0xcf7: clean.
[ 16.956000] cs: IO port probe 0xa00-0xaff: clean.
[ 16.960000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
[ 16.960000] synaptics: Toshiba Satellite A130 detected, limiting rate to 40pps.
[ 16.988000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 17.108000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 17.108000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 17.872000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 17.872000] HDA Intel: probe of 0000:00:1b.0 failed with error -16
[ 18.092000] lp: driver loaded but no devices found
[ 18.172000] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k
[ 18.440000] EXT3 FS on sda3, internal journal
[ 18.744000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
[ 20.468000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 20.476000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 20.552000] ACPI: Battery Slot [BAT1] (battery present)
[ 20.568000] No dock devices found.
[ 20.656000] input: Power Button (FF) as /class/input/input3
[ 20.656000] ACPI: Power Button (FF) [PWRF]
[ 20.656000] input: Lid Switch as /class/input/input4
[ 20.656000] ACPI: Lid Switch [LID0]
[ 20.656000] input: Power Button (CM) as /class/input/input5
[ 20.656000] ACPI: Power Button (CM) [PWRB]
[ 20.760000] ACPI: AC Adapter [ACAD] (on-line)
[ 21.800000] ppdev: user-space parallel port driver
[ 21.936000] audit(1192761890.737:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4863 profile="/usr/sbin/cupsd"
[ 21.996000] apm: BIOS not found.
[ 22.104000] r8169: eth0: link down
[ 22.316000] Failure registering capabilities with primary security module.
[ 22.540000] Bluetooth: Core ver 2.11
[ 22.540000] NET: Registered protocol family 31
[ 22.540000] Bluetooth: HCI device and connection manager initialized
[ 22.540000] Bluetooth: HCI socket layer initialized
[ 22.560000] Bluetooth: L2CAP ver 2.8
[ 22.560000] Bluetooth: L2CAP socket layer initialized
[ 22.612000] Bluetooth: RFCOMM socket layer initialized
[ 22.612000] Bluetooth: RFCOMM TTY layer initialized
[ 22.612000] Bluetooth: RFCOMM ver 1.8
[ 123.620000] UDF-fs: No VRS found
[ 123.652000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 123.740000] ISO 9660 Extensions: RRIP_1991A
[ 128.652000] NET: Registered protocol family 17
[ 131.804000] ieee80211_crypt: registered algorithm 'TKIP'
[ 139.484000] NET: Registered protocol family 10
[ 139.484000] lo: Disabled Privacy Extensions
[ 139.484000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 150.352000] eth1: no IPv6 routers present
[ 224.056000] UDF-fs: No VRS found
[ 224.088000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 224.140000] ISO 9660 Extensions: RRIP_1991A
# cat /proc/interrupts
CPU0 CPU1
0: 475674 0 IO-APIC-edge timer
1: 1259 0 IO-APIC-edge i8042
8: 10 0 IO-APIC-edge rtc
9: 3087 0 IO-APIC-fasteoi acpi
12: 299656 0 IO-APIC-edge i8042
14: 13862 0 IO-APIC-edge libata
15: 6257 0 IO-APIC-edge libata
16: 28 0 IO-APIC-fasteoi uhci_hcd:usb4, yenta
17: 87132 0 IO-APIC-fasteoi ohci1394, ipw3945
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb3, tifm_7xx1, eth0
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb2, sdhci:slot0
20: 2 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
NMI: 0 0
LOC: 81497 281287
ERR: 0
MIS: 0