# !!! NOTE !!!
# Do NOT add spaces or comments at the end of option lines.
# It confuses some versions of make.
# Use grub instead of autoboot?
USE_GRUB = 1
# Grub menu.lst path
MENULST_FILE = "hdc1:/boot/grub/menu.lst"
# Via Epia-MII CF boot:
#MENULST_FILE = "hde1:/boot/filo/menu.lst"
# time before default menu.lst is chosen. Set to 0 to ignore
MENULST_TIMEOUT = 0
# Image filename for automatic boot and optional command line parameter
AUTOBOOT_FILE = "hdc1:/vmlinuz root=/dev/hdc1 console=ttyS0,115200 console=tty0 initrd=/boot/initrd.img"
#AUTOBOOT_FILE = "mem@0xfff80000"
#AUTOBOOT_FILE = "hde1@0"
#AUTOBOOT_FILE = "uda1:/vmlinuz.elf"
# Time in second before booting AUTOBOOT_FILE
AUTOBOOT_DELAY = 2
# Driver for hard disk, CompactFlash, and CD-ROM on IDE bus
IDE_DISK = 1
# Add a short delay when polling status registers
# (required on some broken SATA controllers)
# NOTE: Slows down access significantly, so disable
# whenever possible.
#IDE_DISK_POLL_DELAY = 1
# Use PCMCIA compact flash on Via Epia MII10000 and MII6000E
# This device is referred to as hde.
#PCMCIA_CF = 1
# Driver for USB Storage
#USB_DISK = 0
# VGA text console
VGA_CONSOLE = 1
PC_KEYBOARD = 1
# Serial console
SERIAL_CONSOLE = 1
SERIAL_IOBASE = 0x3f8
# if SERIAL_SPEED is commented out, the speed will not be changed.
#SERIAL_SPEED = 115200
# Filesystems
FSYS_EXT2FS = 1
#FSYS_FAT = 0
#FSYS_JFS = 1
#FSYS_MINIX = 1
#FSYS_REISERFS = 0
#FSYS_XFS = 1
#FSYS_ISO9660 = 0
#FSYS_CRAMFS = 1
# Support for boot disk image in bootable CD-ROM (El Torito)
#ELTORITO = 0
# PCI support
SUPPORT_PCI = 1
# Enable this to scan PCI busses above bus 0
# AMD64 based boards do need this.
PCI_BRUTE_SCAN = 0
# Sound support (needs SUPPORT_PCI)
#SUPPORT_SOUND = 1
# Sound drivers
#VIA_SOUND = 1
# Debugging
#DEBUG_ALL = 1
#DEBUG_ELFBOOT = 1
#DEBUG_ELFNOTE = 1
#DEBUG_LINUXBIOS = 1
#DEBUG_MALLOC = 1
#DEBUG_MULTIBOOT = 1
#DEBUG_SEGMENT = 1
#DEBUG_SYS_INFO = 1
#DEBUG_TIMER = 1
#DEBUG_BLOCKDEV = 1
#DEBUG_PCI = 1
#DEBUG_VIA_SOUND = 1
#DEBUG_LINUXLOAD = 1
#DEBUG_IDE = 1
#DEBUG_USB = 1
#DEBUG_ELTORITO = 1
# i386 options
# Loader for standard Linux kernel image, a.k.a. /vmlinuz
LINUX_LOADER = 1
# Boot FILO from Multiboot loader (eg. GRUB)
#MULTIBOOT_IMAGE = 1