Someone

Ethernet eth0: MAC address 00:30:ab:00:01:a1
IP: 192.168.1.1/255.255.255.0, Gateway: 192.168.1.1
Default server: 192.168.1.254

RedBoot(tm) bootstrap and debug environment [ROMRAM]
Release, version V1.00 - built 14:49:36, Jun 14 2006

Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.

Board: ap51
RAM: 0x80000000-0x82000000, [0x8003cb30-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87e0000, 128 blocks of 0x00010000 bytes each.
== Executing boot script in 1.000 seconds - enter ^C to abort
RedBoot> check_mac
Lan Mac address is  : 00:30:ab:00:01:a1
Wlan Mac address is : 00:30:ab:00:01:a1
RedBoot> load art_ap51.elf
Using default protocol (TFTP)
__udp_sendto: Can't find address of server
Can't load 'art_ap51.elf': some sort of network error
RedBoot> go
No entry point known - aborted
RedBoot> fis load -d vmlinux.bin.gz
Image loaded from 0x80041000-0x8018a000
RedBoot> go
<4>CPU revision is: 00019064
<4>Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
<4>Primary data cache 16kB 4-way, linesize 16 bytes.
<4>Linux version 2.4.25-LSDK-5.0.0-RC5 (vincent@itgserver200) (gcc version 3.3.3) #1 Mon Nov 21 19:38:30 CST 2005
<4>Determined physical RAM map:
<4> memory: 02000000 @ 00000000 (usable)
<4>On node 0 totalpages: 8192
<4>zone(0): 8192 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: console=ttyS0,9600
<4>Using 92.000 MHz high precision timer.
<4>Calibrating delay loop... 183.50 BogoMIPS
<6>Memory: 30672k/32768k available (1151k kernel code, 2096k reserved, 80k data, 64k init, 0k highmem)
<6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
<6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>Checking for 'wait' instruction...  unavailable.
<4>POSIX conformance testing by UNIFIX
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<5>JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with no serial options enabled
<6>ttyS00 at 0xb1100003 (irq = 37) is a 16550A
<6>Generic MIPS RTC Driver v1.0
<4>MTD driver for SPI flash.
<4>spiflash: Probing for Serial flash ...
<4>spiflash: Found SPI serial Flash.
<4>8388608: size
<5>Creating 6 MTD partitions on "spiflash":
<5>0x00000000-0x00030000 : "RedBoot"
<5>0x00030000-0x000c0000 : "vmlinux.bin.gz"
<5>0x000c0000-0x00200000 : "rootfs"
<5>0x00200000-0x007d0000 : "unallocated space"
<5>0x007d0000-0x007df000 : "FIS directory"
<4>mtd: partition "FIS directory" doesn't end on an erase block -- force read-only
<5>0x007df000-0x007e0000 : "RedBoot config"
<4>mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force read-only
<6>Initializing Cryptographic API
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 2048 bind 4096)
<6>NET4: Ethernet Bridge 008 for NET4.0
<1>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
<1>All bugs added by David S. Miller <davem@redhat.com>
<4>VFS: Mounted root (jffs2 filesystem) readonly.
<6>Freeing unused kernel memory: 64k freed
<4>Algorithmics/MIPS FPU Emulator v1.5
init started:  BusyBox v1.00-pre10 (2005.11.21-11:41+0000) multi-call binary
Starting pid 10, console /dev/console: '/etc/rc.d/rcS'
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/ae531x.o
Warning: loading ae531x will tai<4>AR2316 8M byes
nt the kernel: non-GPL license - Atheros
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/misc/ar531x-wdt.o
Warning: loading ar531x-wdt will taint the kernel: non-GPL license - Atheros
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
/etc/wlan/wlanconfig not found. Use default settings.
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/ath_hal.o
Warning: loading ath_hal will taint the kernel: <6>ath_hal: 0.9.16.1 (AR5212, AR5312, RF5111, RF5112, RF2413, RF5413, RF2316)non-GPL license - Proprietary
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/wlan.o
<6>wlan: 0.8.4.2 (Atheros/multi-bss)
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/ath_rate_atheros.o
Warning: loading<6>ath_rate_atheros: Version 2.0.1
<4>Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
 ath_rate_atheros will taint the kernel: non-GPL license - Proprietary
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/2.4.25-LSDK-5.0.0-RC5/net/ath_ahb.o
<6>ath_ahb: 0.9.4.5 (Atheros/multi-bss)
<4>wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
<4>wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
<4>wifi0: mac 11.0 phy 4.8 radio 7.0
<4>wifi0: Use hw queue 1 for WME_AC_BE traffic
<4>wifi0: Use hw queue 0 for WME_AC_BK traffic
<4>wifi0: Use hw queue 2 for WME_AC_VI traffic
<4>wifi0: Use hw queue 3 for WME_AC_VO traffic
<4>wifi0: Use hw queue 8 for CAB traffic
<4>wifi0: Use hw queue 9 for beacons
<6>wifi0: Atheros 2315 WiSoC: mem=0xb0000000, irq=3
<6>device eth0 entered promiscuous mode
/etc/wlan/wlanconfig.0 not found. Use default settings.
<mapping sub-ioctl turbo to cmd 0x8BE0-1>
/etc/wlan/wlanconfig.0.0 not found. Use default settings.
<6>device ath0 entered promiscuous mode
<6>ath0: attempt to add interface with same source address.
<6>br0: port 2(ath0) entering learning state
<6>br0: port 1(eth0) entering learning state
Updating neighbor's ARP cache ...
<6>br0: port 2(ath0) entering forwarding state
<6>br0: topology change detected, propagating
<6>br0: port 1(eth0) entering forwarding state
<6>br0: topology change detected, propagating
Starting pid 147, console /dev/console: '/bin/sh'


BusyBox v1.00-pre10 (2005.11.21-11:41+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

/bin/sh: can't access tty; job control turned off
wlan[0,0]->