rendered paste bodyTCNiSO 5100 Bootstrap CPU = BCM3348A1
Ebi Initialized: 000002020000001C
Sdram Initialized: [ OK ]
CPU instruction cache size: 2000
CPU instruction cache line size: 0010
CPU data cache size: 2000
CPU data cache line size: 0010
Sdram access: [ OK ]
TCNiSO Compressed bootloader detected
Compressed bootloader size: 0062DA
Compressed Image location: 81F80000
Decompression Status: 00000000
Dcompressed Bootloader size: 00011005
BSS Initialized: [ OK ]
TMP Stack initialized: [ OK ]
Perm Stack initialized: [ OK ]
MemSize: ......................... 8M
flashDetect: ERROR: Flash programming FAILED: 3
flashGetBase: ERROR: Flash programming FAILED: 3
flashDetect: ERROR: Flash programming FAILED: 3
flashGetBase: ERROR: Flash programming FAILED: 3
flashDetect: ERROR: Flash programming FAILED: 3
flashGetBase: ERROR: Flash programming FAILED: 3
flashDetect: ERROR: Flash programming FAILED: 3
flashGetBase: ERROR: Flash programming FAILED: 3
flashDetect: ERROR: Flash programming FAILED: 3
flashGetBase: ERROR: Flash programming FAILED: 3
TCNiSO SIGMA Bootloader v2.6
Build date: May 9 2005
flashDetect: ERROR: Flash programming FAILED: 3
flashGetBase: ERROR: Flash programming FAILED: 3
flashDetect: ERROR: Flash programming FAILED: 3
flashGetBase: ERROR: Flash programming FAILED: 3
Location: 0xBFC10000
Signature: 3348
Control: 0000
Major Rev: 0002
Minor Rev: 0001
Build Time: 2006/6/22 21:35:56 Z
File Length: 966718 bytes
Load Address: 80500000
Filename: sigmax2.tcniso.bin
Bypassing CRC Verifiction on Image 1...
Loading Image 1...
Executing Image 1...
flashDetect: ERROR: Flash programming FAILED: 3
flashGetBase: ERROR: Flash programming FAILED: 3
TCNiSO FirmwareDecompressor v2.0.3
Detected Compressed Firmware..... Decompressing...
Target Address: 0x80010000
...................
Decompressed length: 4981302
3348
NFS client support not included.
usrRoot:usrNetInit: complete!
Loading symbol table from admin:/vxWorks.st.sym ...Error opening admin:/vxWorks.st.sym: status = 0xd0001
Hello... and welcome to the wonderful world of vxWorks!!
CmTargetLowLevelInit: Loading Flash/ProgramStore/NonVol drivers...
FlashDeviceDriver::DetectFlash: ERROR - Failed to detect flash type (not CFI-compliant)!
FlashDeviceDriver::FlashDriverInit: ERROR - Failed to autodetect flash device!
CmTargetLowLevelInit: Creating singletons for ProgramStore/BootloaderStore/NonVol devices...
Detecting the next image number that we will store to by default...
0x14 Computing CRC32 over image2 to ensure that it is valid...
ProgramStoreDeviceDriver::ProgramStoreDriverIsImageValid: ERROR - Failed to open flash driver!
0x1e Done computing CRC32!
By default, we will dload to image number 2!
FlashDeviceDriver::FlashDriverGetRegionInfo: WARNING - Invalid region specified; returning NULL
NonVolDeviceDriver::NonVolDriverMaxSizeBytes: ERROR - Failed to query flash region info!
FlashDeviceDriver::FlashDriverGetRegionInfo: WARNING - Invalid region specified; returning NULL
NonVolDeviceDriver::NonVolDriverMaxSizeBytes: ERROR - Failed to query flash region info!
Reading Dynamic settings from non-vol...
FlashDeviceDriver::FlashDriverGetRegionInfo: WARNING - Invalid region specified; returning NULL
NonVolDeviceDriver::ReadTrueSegmentSizeBytes: ERROR - Failed to open the flash driver!
NonVolDeviceDriver::NonVolDriverRead: ERROR - Failed to query the segment size (returned 0 bytes)! There is no valid data to read.
0x00000064 ['tStartup' id=0x807e3690] BcmNonVolDeviceDriverBridge::ReadImpl: (NonVol Device) ERROR - Failed to read the length from the settings data!
0x00000078 ['tStartup' id=0x807e3690] BcmNonVolDeviceDriverBridge::Read: (NonVol Device) ERROR - Failed to read the buffer from the device! Resetting the entire section to defaults.
0x00000082 ['tStartup' id=0x807e3690] BcmSnmpNonVolSettings::ResetDefaults: (SNMP NonVol Settings) WARNING - Resetting Dynamic Settings!
*
*
* Failed to read non-vol settings from the device!
*
*
Reading Permanent settings from non-vol...
FlashDeviceDriver::FlashDriverGetRegionInfo: WARNING - Invalid region specified; returning NULL
NonVolDeviceDriver::ReadTrueSegmentSizeBytes: ERROR - Failed to open the flash driver!
NonVolDeviceDriver::NonVolDriverRead: ERROR - Failed to query the segment size (returned 0 bytes)! There is no valid data to read.
0x000000be ['tStartup' id=0x807e3690] BcmNonVolDeviceDriverBridge::ReadImpl: (NonVol Device) ERROR - Failed to read the length from the settings data!
0x000000c8 ['tStartup' id=0x807e3690] BcmNonVolDeviceDriverBridge::Read: (NonVol Device) ERROR - Failed to read the buffer from the device! Resetting the entire section to defaults.
0x000000dc ['tStartup' id=0x807e3690] BcmHalIfNonVolSettings::ResetDefaults: (HalIf NonVol Settings) WARNING - Resetting Permanent Settings to defaults! MAC addresses and other settings are now invalid!
0x000000f0 ['tStartup' id=0x807e3690] BcmCmBpiNonVolSettings::ResetDefaults: (CM BPI NonVol Settings) WARNING - Permanent settings (BPI Keys and other unique values) are being reset to their default values!
0x000000fa ['tStartup' id=0x807e3690] BcmSnmpNonVolSettings::ResetDefaults: (SNMP NonVol Settings) WARNING - Resetting all Permanent Settings! The serial number and other Sys Info items are probably invalid!
0x0000010e ['tStartup' id=0x807e3690] BcmDocsisCmDownstreamCalibrationNonVolSettings::ResetDefaults: (DOCSIS CM Downstream Calibration NonVol Settings) WARNING - Resetting Permanent Settings to defaults! The downstream calibration table will reset to default values!
0x0000012c ['tStartup' id=0x807e3690] BcmDocsisCmUpstreamCalibrationNonVolSettings::ResetDefaults: (DOCSIS CM Upstream Calibration NonVol Settings) WARNING - Resetting Permanent Settings to defaults! The upstream calibration tables will be configured for the default Amplifier!
*
*
* Failed to read non-vol settings from the device!
*
*
0x00000172 ['Telnet Thread' id=0x807ec540] BcmTelnetThread::ThreadMain: (Telnet Thread) Telnet server thread running...
Calling Vendor PreDriverInitialization...
PreDriverInitialization: Tuner 0 Amp 4
tunerInit()
Attaching network interface lo0... done.
NOTE: Driver initialization was skipped! The application will not run or foward data. You can change NonVol Setting, but that's about it...
*
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* *
* * * *
* * * * * * ***
* * * * * * * * *******************
* * * * * *
* *
Copyright (c) 1999 - 2003 Broadcom Corporation
+----------------------------------------------------------------------------+
| Build Date: Aug 26 2003 |
| Build Time: 15:51:17 |
| Built By: MGI1145 |
| |
| Revision: 2.9.2n RELEASE vxWorks PID=0x3348 |
| |
| Features: DOCSIS 1.0/1.1/2.0 BPI/BPI+ (no IPSEC) (no EMTA) Propane |
| Features: Vendor:Motorola Corporation SNMPv3 (WindRiver WindManage 9.3) |
+----------------------------------------------------------------------------+
Broadcom DOCSIS 1.0/1.1/2.0 Cable Modem Application starting...
'The cubicle across from you is empty...go now!'
Beginning Cable Modem operation...
Type 'help' or '?' for a list of commands...
WARNING - No DOCSIS Control thread provided. DOCSIS state machine can't run!
CM>