rendered paste bodySlacker
Newbie
*
Posts: 24
View Profile Personal Message (Offline)
Touchpad and Zenwalk
« on: July 15, 2007, 07:49:53 PM »
Reply with quoteQuote
Hey there! First of all, congratulations on Zenwalk 4.6, it' s amazing!!!
Now...how do I make my touchpad work properly in Zenwalk? I' m not able to scroll pages up or down using the pad I can only scroll pages down by using its button and I think this is annoying. Could you guys help me?
I'm running Zenwalk 4.6.1 in a Compaq Presario M2005US laptop computer with amazing speed!!
Thanks,
-cris
Report to moderator Logged
Zenwalk 4.6
on:
Compaq Presario M2005US Laptop
chik3n
Newbie
*
Posts: 47
View Profile Personal Message (Offline)
Re: Touchpad and Zenwalk
« Reply #1 on: July 15, 2007, 08:23:31 PM »
Reply with quoteQuote
Hi,
you could try the Synaptics touchpad driver : http://wiki.zenwalk.org/index.php/ALPS_Touchpad
greetings, chik3n
Report to moderator Logged
Slacker
Newbie
*
Posts: 24
View Profile Personal Message (Offline)
Re: Touchpad and Zenwalk
« Reply #2 on: July 15, 2007, 09:29:07 PM »
Reply with quoteQuote
Thanks for the help but it didn't work. I followed the tutorial and it only locked my pointer down. Here's the output of dmesg:
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
input: AT Translated Set 2 keyboard as /class/input/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
input: Power Button (FF) as /class/input/input2
input: Lid Switch as /class/input/input3
input: Sleep Button (CM) as /class/input/input4
I've installed the driver provided in the tutorial and yet it didn't work.
Thanks,
-cris
Report to moderator Logged
Zenwalk 4.6
on:
Compaq Presario M2005US Laptop
chik3n
Newbie
*
Posts: 47
View Profile Personal Message (Offline)
Re: Touchpad and Zenwalk
« Reply #3 on: July 15, 2007, 11:48:17 PM »
Reply with quoteQuote
Hi,
could you tell us your xorg.conf setup ? ( cat /etc/X11/xorg.conf)
greetings, chik3n
Report to moderator Logged
Slacker
Newbie
*
Posts: 24
View Profile Personal Message (Offline)
Re: Touchpad and Zenwalk
« Reply #4 on: July 16, 2007, 12:09:02 AM »
Reply with quoteQuote
Well...it looks like this:
# **********************************************************************
# This file was generated by videoconfig (Zenwalk Xorg configuration tool)
# If you changed your video card or monitor, please run videoconfig again
# from runlevel 3. Don't modify this file yourself until you know what you do wink
# **********************************************************************
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/X11/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
Section "Module"
Load "glx"
Load "extmod"
Load "xtrap"
Load "record"
Load "GLcore"
Load "dbe"
Load "dri"
Load "freetype"
Load "type1"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Option "NoTrapSignals"
# Option "DontVTSwitch"
# Option "DontZap"
# Option "DontZoom"
# Option "DisableVidModeExtension"
# Option "AllowNonLocalXvidtune"
# Option "DisableModInDev"
# Option "AllowNonLocalModInDev"
# Option "blank time" "10" # 10 minutes
# Option "standby time" "20"
# Option "suspend time" "30"
# Option "off time" "60"
# Option "EstimateSizesAggresively" "0"
EndSection
# **********************************************************************
# DRI section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
EndSection
# **********************************************************************
# Extensions section.
# **********************************************************************
Section "Extensions"
Option "Composite" "Enable"
EndSection
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# Option "Protocol" "Xqueue"
# Option "AutoRepeat" "500 5"
# Option "Xleds" "1 2 3"
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us-intl"
# Option "XkbVariant" "us"
# Option "XkbOptions" ""
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/mouse"
# Option "Protocol" "Xqueue"
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# Option "ChordMiddle"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapTime" "150"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.3"
Option "MaxSpeed" "0.75"
Option "AccelFactor" "0.015"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "SHMConfig" "on"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
Section "Monitor"
Identifier "Monitor1"
VendorName "LPL"
ModelName "0"
HorizSync 31.5 - 50.0
VertRefresh 40-90
Option "UseEdidFreqs" "1"
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "Videocard1"
VendorName "Intel Corporation"
BoardName "82852/855GM Integrated Graphics Device"
Driver "i810"
BusID "PCI:0:2:0"
Option "RenderAccel" "true"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
Section "Screen"
Identifier "Videoconfig"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
Subsection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Videoconfig"
InputDevice "Touchpad" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
With this configuration my touchpad gets locked down. Maybe I did something wrong.
-cris
Report to moderator Logged
Zenwalk 4.6
on:
Compaq Presario M2005US Laptop
guth
Dev team
****
Posts: 670
View Profile Personal Message (Offline)
Re: Touchpad and Zenwalk
« Reply #5 on: July 16, 2007, 12:12:01 AM »
Reply with quoteQuote
add
Code:
Load "synaptics"
to "Module" section
and you might need to change the "Device" in the Input synaptics part (mine is /dev/ts0)
Report to moderator Logged
Guth
Zenwalk: Don't Panic
Slacker
Newbie
*
Posts: 24
View Profile Personal Message (Offline)
Re: Touchpad and Zenwalk
« Reply #6 on: July 16, 2007, 12:41:43 AM »
Reply with quoteQuote
Not working yet. Pointer continues frozen. sad
-cris
Report to moderator Logged
Zenwalk 4.6
on:
Compaq Presario M2005US Laptop
guth
Dev team
****
Posts: 670
View Profile Personal Message (Offline)
Re: Touchpad and Zenwalk
« Reply #7 on: July 16, 2007, 01:01:24 AM »
Reply with quoteQuote
try with
Quote from: Slacker on July 16, 2007, 12:09:02 AM
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Videoconfig"
InputDevice "Touchpad" "AlwaysCore" # <- change here
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer" # <- add here
EndSection
Report to moderator Logged
Guth
Zenwalk: Don't Panic
Slacker
Newbie
*
Posts: 24
View Profile Personal Message (Offline)
Re: Touchpad and Zenwalk
« Reply #8 on: July 16, 2007, 01:31:37 AM »
Reply with quoteQuote
Crap...not working yet.Still frozen.Maybe it is the Device location, I've tried /dev/ts0 and /dev/auto none of them worked properly. Any other idea? In my slack 12 I didn't had to do anything to setup my touchpad sad
Thanks for your patience guys.
-cris
Report to moderator Logged
Zenwalk 4.6
on:
Compaq Presario M2005US Laptop
guth
Dev team
****
Posts: 670
View Profile Personal Message (Offline)
Re: Touchpad and Zenwalk
« Reply #9 on: July 16, 2007, 07:45:38 AM »
Reply with quoteQuote
you can test with any: /dev/input/*
but dmesg can be helpful:
$ dmesg |grep Touch
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x804713/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
Report to moderator Logged
Guth
Zenwalk: Don't Panic
Slacker
Newbie
*
Posts: 24
View Profile Personal Message (Offline)
Re: Touchpad and Zenwalk
« Reply #10 on: July 17, 2007, 04:02:10 AM »
Reply with quoteQuote
Still couldn't make it work properly. I don't if I'm doing something wrong or what.I just keeping freezing the pointer all the time I try to use the xorg conf with the synaptics driver. sad
Report to moderator Logged
Zenwalk 4.6
on:
Compaq Presario M2005US Laptop
guth
Dev team
****
Posts: 670
View Profile Personal Message (Offline)
Re: Touchpad and Zenwalk
« Reply #11 on: July 17, 2007, 08:35:29 PM »
Reply with quoteQuote
can you repost/recheck your xorg.conf (the loadmodule, input synaptics, serverlayout sections)
here is mine, working with touchpad and no problem if usb mouse is pluged (both control the cursor):
http://zen-repo.meticul.eu/zen_stuffs/guth/xorg.conf
Report to moderator Logged
Guth
Zenwalk: Don't Panic
Slacker
Newbie
*
Posts: 24
View Profile Personal Message (Offline)
Re: Touchpad and Zenwalk
« Reply #12 on: July 18, 2007, 05:21:45 AM »
Reply with quoteQuote
Hey Guth!! I've just copied the synaptics part of your xorg.conf and now my touchpad is working perfectly, probably it was something in my config tha was screwed :p . Thanks a lot mate! You guys from Zenwalk just rock!!! Thanks.
-cris
Report to moderator Logged
Zenwalk 4.6
on:
Compaq Presario M2005US Laptop
Pages: [1] Go Up
Reply | Notify | Mark unread | Send this topic | Print
« previous next »
Jump to:
Powered by MySQL Powered by PHP Powered by SMF 1.1.4 | SMF © 2006-2007, Simple Machines LLC