rendered paste body(AVM) EVA Revision: 1.267 Version: 1267
(C) Copyright 2005 AVM Date: May 7 2007 Time: 12:59:39 (0) 2 0-11111
[FLASH:] MACRONIX Top-MirrorBit-Flash 8MB 32 Bytes WriteBuffer
[FLASH:](Eraseregion [0] 127 sectors a 64kB)
[FLASH:](Eraseregion [1] 8 sectors a 8kB)
[SYSTEM:] OHIO on 211MHz/125MHz
Eva_AVM >AVM decompress Kernel:
.............done
start kernel
[ohio_pre_init] System Clk = 62500000 Hz
LINUX started...
Linux version 2.6.13.1-ohio () (gcc version 3.4.6) #1 Sat Oct 6 01:22:28 CEST 2007
memsize=32 MByte
flashsize=8 MByte
&_end=0x94236ca4 PFN_ALIGN(&_end)=0x94237000 CPHYSADDR(PFN_ALIGN(&_end))=0x14237000 memsize=0x200000
CPU revision is: 00018448
[ohio_gpio_init]
Determined physical RAM map:
memory: 00237000 @ 14000000 (reserved)
memory: 01dc9000 @ 14237000 (usable)
On node 0 totalpages: 8192
[alloc_node_mem_map] reduce size from 2883616 Bytes to 262176 Bytes
[alloc_node_mem_map]: (org) sizeof(mem_map) = 262176 mem_map=0x9423a000-0x9427a020
[alloc_node_mem_map]: sizeof(mem_map) = 2883616 mem_map=0x93fba000-0x9427a020
zone=0 zone_size[j]=0x90112
realsize=8192
DMA zone: 8192 pages, LIFO batch:3
zone=1 zone_size[j]=0x0
realsize=0
Normal zone: 0 pages, LIFO batch:1
zone=2 zone_size[j]=0x0
realsize=0
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: idle=4 console=ttyS0,38400n8r
[ld_mmu_r4xx0] memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x30)
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 8kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions). Base=0x94209aec
TLB synthesizer field overflow (simm)
Synthesized TLB load handler fastpath (34 instructions) Base=0x9420d620.
TLB synthesizer field overflow (simm)
Synthesized TLB store handler fastpath (34 instructions) Base=0x9420d820.
TLB synthesizer field overflow (simm)
Synthesized TLB modify handler fastpath (33 instructions) Base=0x9420da20.
PID hash table entries: 256 (order: 8, 4096 bytes)
CPU frequency 211.97 MHz
Using 105.984 MHz high precision timer.
[setup_irq]: irq 255 irqaction->handler 0x94042fd0 (no_action+0x0/0x8 )
[register_console] enable commandline console 0
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30116k/30500k available (1586k kernel code, 320k reserved, 389k data, 116k init, 0k highmem)
totalram_pages= 7545
Calibrating delay loop... 211.35 BogoMIPS (lpj=1056768)
loops_per_jiffy=1056768
Mount-cache hash table entries: 512
Checking for 'wait' instruction... [speedup] idle_mode = 4
with idle values available.
NET: Registered protocol family 16
Can't analyze prologue code at 9418b13c
Squashfs 2.2-r2b (released 2006/02/23) (C) 2002-2005 Phillip Lougher
Initializing Cryptographic API
[avm_power]Ohio250 detected -> overclocking possible
[avm] configured: watchdog eventled enable shift register enable direct gpio
gpio usage: reset=12 clock=13 store=10 data=9
AR7WDT: Watchdog Driver for AR7 Hardware (Version 1.0, build: Oct 6 2007 01:20:22)
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
[uart_add_one_port]
ttyS0 at MMIO 0x0 (irq = 15) is a OHIO_UART
[uart_add_one_port] dont register console port->type = 16
port->cons = 0x941ce1d0 port->cons->flags = 0x7
[uart_add_one_port] success
io scheduler noop registered
[cpmac] [cpmac_if_register] dev cpmac0 (phy_id 0) registered
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
physmap flash device: 400000 at 10000000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
phys_mapped_flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
RedBoot partition parsing not available
Generic platform RAM MTD, (c) 2004 Simtec Electronics
Ohio flash driver (size->0x400000 mem->0x10000000)
flash_size=0x800000
flash_mask=0xffffff
Ohio flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
[genprobe_ident_chips] 4 i 0 j 0
[genprobe_ident_chips] 5 i 0 j 1
Amd/Fujitsu Extended Query Table at 0x0040
Ohio flash memory: Swapping erase regions for broken CFI table.
number of CFI chips: 1
[mtd]: set to default: jffs2_size = 0x20 * 64KByte (0x200000 Bytes)
[ohio_find_hidden_filesystem]: super block found: bytes_used: 0x4f035f/5178207
[init_ohio_flash] find hidden filesystem size=0x6cb400 offset=0xb4c00
[mtd] configure jffs2 partition
[mtd] fs_size=0x5a0000 max=0x1d0000 is=0x200000 max jffs2_size value 29
[mtd] ERROR jffs2_size too big, reduce to max
[mtd] ohio_flash_map: name=Ohio flash memory bankwidth=2 virt=0xb0000000 phys=0x10000000 size=0x8000
Creating 7 MTD partitions on "Ohio flash memory":
0x000b4c00-0x00780000 : "filesystem"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
mtd: partition "filesystem" doesn't start on an erase block boundary -- force read-only
0x00010000-0x00780000 : "kernel"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00000000-0x00010000 : "bootloader"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00780000-0x007c0000 : "tffs (1)"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x007c0000-0x00800000 : "tffs (2)"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x005b0000-0x00780000 : "jffs2"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
0x00010000-0x005b0000 : "Kernel without jffs2"
'nor-flash'
'Bits can be cleared (flash)'
'Has an erase function'
partition_info[0]: name=filesystem offset=b4c00 size=6cb400
partition_info[0]: 0xb00b4c00: 0x73717368 0x742
partition_info[1]: name=kernel offset=10000 size=770000
partition_info[1]: 0xb0010000: 0xfeed1281 0xa4b0e
partition_info[2]: name=bootloader offset=0 size=10000
partition_info[2]: 0xb0000000: 0x40809000 0x40809800
partition_info[3]: name=tffs (1) offset=780000 size=40000
partition_info[3]: 0xb0780000: 0x40001 0xfbffffff
partition_info[4]: name=tffs (2) offset=7c0000 size=40000
partition_info[4]: 0xb07c0000: 0x40001 0xfaffffff
partition_info[5]: name=jffs2 offset=5b0000 size=1d0000
partition_info[5]: 0xb05b0000: 0xffffffff 0xffffffff
partition_info[6]: name=Kernel without jffs2 offset=10000 size=5a0000
partition_info[6]: 0xb0010000: 0xfeed1281 0xa4b0e
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
mcfw: IGMPv3 fast forwarding
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
[setup_irq]: irq 1 irqaction->handler 0x94001590 (dummy_timer_irq+0x0/0x14 )
[setup_irq]: irq 6 irqaction->handler 0x940015a4 (dummy_system_irq_2+0x0/0x14 )
[ohio_late_init]
[avm_new] push_button_gpio=8 value=1 enabled
TFFS: tiny flash file system driver. GPL (c) AVM Berlin (Version 2.0)
mount on mtd4 and mtd5 (double buffering)
Adam2 environment variables API installed.
[prepare_namespace] new mount root /dev/mtdblock1
use lzma compression
VFS: Mounted root (squashfs filesystem) readonly.
Freeing prom memory: 0kb freed
Freeing unused kernel memory: 116k freed (7574 free)
[setup_irq]: irq 15 irqaction->handler 0x940dbe4c (serial8250_interrupt+0x0/0x13c )
init started: BusyBox v1.7.2 (2007-09-30 21:19:30 CEST)
rootdir=/
table='/etc/device.table'
AR7WDT: System Init UEberwachung 120 Sekunden
TFFS Name Table 9
HWRevision 101.1.1.0
ProductID Fritz_Box_SpeedportW701V
SerialNumber 0000000000000000
annex B
autoload yes
bootloaderVersion 1.267
bootserport tty0
bluetooth
cpufrequency 211968000
firstfreeaddress 0x946A5D98
firmware_version tcom
firmware_info 33.04.44
flashsize 0x00800000
kernel_args idle=4
maca 00:1C:4A:AB:53:77
macb 00:1C:4A:AB:53:78
macwlan 00:1C:4A:A0:AC:20
macdsl 00:1C:4A:AB:53:79
memsize 0x02000000
modetty0 38400,n,8,1,hw
modetty1 38400,n,8,1,hw
mtd0 0x90000000,0x90000000
mtd1 0x90010000,0x90780000
mtd2 0x90000000,0x90010000
mtd3 0x90780000,0x907C0000
mtd4 0x907C0000,0x90800000
my_ipaddress 192.168.178.1
prompt Eva_AVM
ptest
reserved
req_fullrate_freq 125000000
sysfrequency 125000000
urlader-version 1267
usb_board_mac 00:1C:4A:AB:53:7A
usb_rndis_mac 00:1C:4A:AB:53:7B
usb_device_id 0x0000
usb_revision_id 0x0000
usb_device_name USB DSL Device
usb_manufacturer_name AVM
wlan_key 9027020743054845
wlan_cal 0013,03F8,000A,00E1,010A,00E1,010A,02F5,02DA
HWRevision='101'
HWRevision_ATA='1'
HWRevision_BitFileCount='1'
HWRevision_Reserved1='0'
ANNEX='B'
OEM='tcom'
OEM_DEFAULT_INDEX=''
OEM_tmp='tcom'
Language='de'
Country='049'
TZ='CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00'
CONFIG_AB_COUNT='2'
CONFIG_ACCESSORY_URL='http://www.avm.de/fritzbox_apps.php?hardware=101&oem=tcom&language=de&country'
CONFIG_ANNEX='B'
CONFIG_ASSIST='y'
CONFIG_ATA='y'
CONFIG_ATA_FULL='n'
CONFIG_AUDIO='n'
CONFIG_AURA='n'
CONFIG_BLUETOOTH='n'
CONFIG_BLUETOOTH_CTP='n'
CONFIG_BUTTON='y'
CONFIG_CAPI='y'
CONFIG_CAPI_MIPS='n'
CONFIG_CAPI_NT='n'
CONFIG_CAPI_POTS='y'
CONFIG_CAPI_TE='y'
CONFIG_CAPI_UBIK='n'
CONFIG_CAPI_XILINX='y'
CONFIG_CDROM='n'
CONFIG_CDROM_FALLBACK='n'
CONFIG_DECT='n'
CONFIG_DSL='y'
CONFIG_ECO='n'
CONFIG_ENVIRONMENT='/var/env'
CONFIG_ENVIRONMENT_PATH='/proc/sys/urlader'
CONFIG_ETH_COUNT='4'
CONFIG_FIRMWARE_URL='http://www.t-com.de/downloads'
CONFIG_FON='y'
CONFIG_HOMEI2C='n'
CONFIG_HOSTNAME='speedport.ip'
CONFIG_I2C='n'
CONFIG_IGD='n'
CONFIG_INSTALL_TYPE='ar7_8MB_xilinx_4eth_2ab_isdn_pots_wlan_13200'
CONFIG_IPONE='n'
CONFIG_JFFS2='n'
CONFIG_KIDS='y'
CONFIG_LED_NO_DSL_LED='n'
CONFIG_LOGD='n'
CONFIG_MAILER='n'
CONFIG_MEDIACLI='n'
CONFIG_MEDIASRV='n'
CONFIG_NAND='n'
CONFIG_NFS='n'
CONFIG_OEM_DEFAULT='tcom'
CONFIG_PRODUKT='Fritz_Box_SpeedportW701V'
CONFIG_PRODUKT_NAME='Speedport W 701V'
CONFIG_RAMSIZE='32'
CONFIG_RELEASE='1'
CONFIG_ROMSIZE='8'
CONFIG_SAMBA='n'
CONFIG_SERVICEPORTAL_URL='none'
CONFIG_STOREUSRCFG='y'
CONFIG_SUBVERSION='ds26-pre16-1136M'
CONFIG_SWAP='n'
CONFIG_T38='y'
CONFIG_TAM='n'
CONFIG_TAM_MODE='0'
CONFIG_TR064='y'
CONFIG_TR069='y'
CONFIG_UBIK2='n'
CONFIG_UPNP='n'
CONFIG_USB='n'
CONFIG_USB_HOST_AVM='n'
CONFIG_USB_HOST_TI='n'
CONFIG_USB_PRINT_SERV='n'
CONFIG_USB_STORAGE='n'
CONFIG_USB_WLAN_AUTH='n'
CONFIG_VDSL='n'
CONFIG_VERSION='04.44'
CONFIG_VERSION_MAJOR='33'
CONFIG_VLYNQ='y'
CONFIG_VLYNQ0='0'
CONFIG_VLYNQ1='0'
CONFIG_VPN='n'
CONFIG_WLAN='y'
CONFIG_WLAN_1130TNET='n'
CONFIG_WLAN_1350TNET='y'
CONFIG_WLAN_GREEN='n'
CONFIG_WLAN_IPTV='n'
CONFIG_WLAN_TXPOWER='n'
CONFIG_WLAN_WDS='y'
CONFIG_WLAN_WMM='y'
CONFIG_XILINX='y'
set 'Activate Wizzard'
mknod: /var/flash/ar7.cfg: File exists
Loading /var/flash/ds_mod...done.
Loading passwords...done.
Loading hosts...done.
Loading config...[avm_new]push_button 'Wlan-Taster', released: GPIO=8 presses=9250 key=button_key_3
done.
Loading modules...done.
cp /etc/default.049/fx_moh.default /var/fx_moh
Piglet: module license '
(C) Copyright 2005 by AVM
' taints kernel.
[avm_new]push_button_ctrl: gpio=6 value=0 enabled
[avm_new]push_button_ctrl:'Werkseinstellungs-Taster': enable=2 gpio=6 regaddr=00000000 button_type=1
EMIF: asize=1 ta=3 r_hold=0 w_strobe=6 r_strobe=6 ew=1
[avm_new]push_button_ctrl:'ATA-Schalter': enable=1 gpio=0 regaddr=be00002c button_type=2
attempting to load DSL Firmware '/lib/modules/microvoip-dsl.bin'
**** ANNEX: 'B'
*************************************
setting DSL Firmware to Annex B
registered device TI Avalanche SAR
tiatm driver (patch_annex=0xc0055e2c)
[tiatm] Set StrictPriority=0
DSP binary filesize = 326976 bytes
[tiatm] INFO V2U-BRIDGEREGISTER: 0x00000019
[setup_irq]: irq 23 irqaction->handler 0xc003d208 (tn7atm_sar_irq+0x0/0x30 [tiatm] )
[setup_irq]: irq 31 irqaction->handler 0xc003d238 (tn7atm_dsl_irq+0x0/0x28 [tiatm] )
[tiatm]: Powermanagment (States => 1,3,10) supported!
Texas Instruments ATM driver: version:[4.06.04.41]
ubik2 driver (ubik2 - 0x10=0xc0069a74)
atm_dsp_register_ubik2: ubik2_ToMIPS_notify=0xc0059bfc
atm_dsp_register_ubik2: dsp mem pointer 0xa1c10ab4
ubik2_init_interface: DSP-Link Version v3 8480
driver params overwritten io_addr=0x0 irq_num=0
[4294938876]DSP-Fw: Version 2.276] EC=3 DTMF=3 Slots=10 BChan=8(Analog=4) DChan=2 Fifo=128
kdsldmod: init start (Sep 7 2007 15:00:24) sizeof(struct sk_buff)=176
kdsldmod: init done
<6>kdsld: PPP led: off (value=0)
Jan 1 01:00:21 ctlmgr[425]: process priority is 19
MAC WLAN: 00:1C:4A:A0:AC:20
WLAN is not enabled
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
Jan 1 01:00:23 ctlmgr[427]: FactoryDefault=/etc/default/tcom/user.cfg (user)
Jan 1 01:00:23 ctlmgr[427]: load_config(user): factory default loaded
Jan 1 01:00:25 ctlmgr[427]: dlopen(/usr/share/ctlmgr/libdect.so) failed: File not found
Jan 1 01:00:25 ctlmgr[427]: dlopen(/usr/share/ctlmgr/libtamconf.so) failed: File not found
Jan 1 01:00:25 ctlmgr[427]: mapping to info-LED already exist
[avm_new]push_button_notify 'ATA-Schalter', key=button_key_7
Jan 1 01:00:25 ctlmgr[427]: box init ok
Starting websrv AVM web UI...Jan 1 01:00:25 ctlmgr[427]: internal vcc:
Jan 1 01:00:25 ctlmgr[427]: name=mstv vpi=1 vci=32 encap=4 sep_config=1 vcc=0x2aab5d00
Jan 1 01:00:25 ctlmgr[427]: name=voip vpi=1 vci=32 encap=1 sep_config=1 vcc=0x2aab5d00
Jan 1 01:00:25 ctlmgr[427]: name=internet vpi=1 vci=32 encap=1 sep_config=0 vcc=0x2aab5d00
[tiatm] ioctl wird von chrdev nicht unterst
done.
Jan 1 01:00:25 ctlmgr[427]: AVM_TIATM_IOCTL_DSLPARAMS_GET failed ret=-1
Jan 1 01:00:25 ctlmgr[427]: ipmasqfwruleex_parse ret=0 'udp 0.0.0.0:5060 0.0.0.0:5060'
Jan 1 01:00:25 ctlmgr[427]: forwardrules: internal rule
Jan 1 01:00:25 ctlmgr[427]: ipmasqfwruleex_parse ret=0 'tcp 0.0.0.0:8089 0.0.0.0:8089'
Jan 1 01:00:25 ctlmgr[427]: forwardrules: internal rule
Jan 1 01:00:25 ctlmgr[427]: ipmasqfwruleex_parse ret=0 'udp 0.0.0.0:5060 0.0.0.0:5060'
Jan 1 01:00:25 ctlmgr[427]: forwardrules: internal rule
Jan 1 01:00:25 ctlmgr[427]: ipmasqfwruleex_parse ret=0 'tcp 0.0.0.0:5060 0.0.0.0:5060'
Jan 1 01:00:25 ctlmgr[427]: forwardrules: internal rule
Jan 1 01:00:25 ctlmgr[427]: ipmasqfwruleex_parse ret=0 'udp 0.0.0.0:7078+32 0.0.0.0:7078'
Jan 1 01:00:25 ctlmgr[427]: forwardrules: internal rule
[4294939876]DSP: XDU=0 OVR=0 MIPS_OVR=1
Jan 1 01:00:25 multid[536]: startup (Sep 7 2007 12:56:35)
[avm_new]push_button_notify 'ATA-Schalter', key=button_key_7
[setup_irq]: irq 27 irqaction->handler 0x940ECB5C (cpmac_main_isr+0x0/0x78 )
Jan 1 01:00:26 multid[540]: new cpmac driver detected
Jan 1 01:00:26 multid[540]: enabling non-ATA-Mode
Jan 1 01:00:26 multid[540]: normal
Jan 1 01:00:26 ctlmgr[427]: /dev/avm_power <-- MODE=dsl
Jan 1 01:00:26 ctlmgr[427]: WAN (ata) led value = 0
[cpmac] cpmac_main_ioctl, unknown ioctl 35142
device eth0 entered promiscuous mode
device cpmac0 entered promiscuous mode
Jan 1 01:00:26 multid[540]: IGMP tos configured to 0x80
Jan 1 01:00:26 multid[540]: mrouter: using IGMPv3 for upstream interface dsl
Jan 1 01:00:26 multid[540]: mrouter: using IGMPv3 for other interfaces
Jan 1 01:00:26 multid[540]: DDNS: no valid accounts
Jan 1 01:00:26 multid[540]: interface eth0 new.
Jan 1 01:00:26 multid[540]: interface lan new.
Jan 1 01:00:26 multid[540]: interface cpmac0 new.
Jan 1 01:00:26 multid[540]: interface cpmac0 up.
Jan 1 01:00:26 multid[540]: interface lo new.
Jan 1 01:00:26 multid[540]: interface lo up.
Jan 1 01:00:26 multid[540]: mrouter: lo: no multicast interface, ignored.
Jan 1 01:00:26 multid[540]: interface eth0 new.
Jan 1 01:00:26 multid[540]: interface lan new.
Jan 1 01:00:26 multid[540]: verbose: DISABLED
Jan 1 01:00:26 dsld[539]: startup (Sep 7 2007 12:56:49)
Jan 1 01:00:26 dsld[539]: new cpmac driver detected
Jan 1 01:00:26 dsld[544]: DSL Mac 00:1c:4a:ab:53:79
Jan 1 01:00:26 dsld[544]: VOIP Mac 00:1c:4a:ab:53:7a
Jan 1 01:00:26 dsld[544]: VCC2 Mac 00:1c:4a:ab:53:7b
Jan 1 01:00:27 dsld[544]: VCC3 Mac 00:1c:4a:ab:53:78
Jan 1 01:00:27 dsld[544]: voip: ppptarget voip disabled, ignored
Jan 1 01:00:27 dsld[544]: compiled tc filter to 0 classes
Jan 1 01:00:27 dsld[544]: compiled tc filter tc:rtp,sip to 2 classes
Jan 1 01:00:27 dsld[544]: compiled tc filter tc:tcp_ack to 1 classes
Jan 1 01:00:27 dsld[544]: compiled tc filter tc:dns,sipdns,ntpdns,tr069dns to 4 classes
Jan 1 01:00:27 dsld[544]: compiled tc filter tc:http_req,tr069 to 2 classes
Jan 1 01:00:27 dsld[544]: compiled tc filter tc:icmp to 1 classes
Jan 1 01:00:27 dsld[544]: compiled tc filter to 0 classes
Jan 1 01:00:27 dsld[544]: verbose: DISABLED
<6>kdsld: sync lost
Jan 1 01:00:27 ctlmgr[427]: TR069_Init() TR069_Init(assi-only)
Jan 1 01:00:27 ctlmgr[427]: TR069_Init returned 0
Jan 1 01:00:27 ctlmgr[427]: TR069_Init() returned 0
telefon: use clock_gettime(CLOCK_MONOTONIC)!
Jan 1 01:00:27 ctlmgr[427]: BUG slabuser: slab_free(0): not allocated
Jan 1 01:00:27 ctlmgr[427]: TR064_Init failed
Jan 1 01:00:27 ctlmgr[427]: verbose: DISABLED
telefon: SIGCHLD received!
telefon: WARNING No config file '/var/flash/fx_def' !
Jan 1 01:00:30 voipd[556]: startup (AVM Speedport W 701V 33.04.44 AVM SIP v8.02.04 Sep 7 2007 12:)
Jan 1 01:00:30 voipd[556]: using capi controller 5
Jan 1 01:00:30 voipd[556]: using b1 protocol 10 for 8kHz
Jan 1 01:00:30 voipd[556]: tel: supported
Jan 1 01:00:30 voipd[556]: ENUM NOT enabled
Jan 1 01:00:30 voipd[556]: enumdomain: e164.arpa
Jan 1 01:00:30 voipd[556]: enumdomain: e164.org
Jan 1 01:00:30 voipd[556]: T38 Init Params t38[16644] Sep 7 2007 12:44:59
Jan 1 01:00:30 voipd[556]: T.38 supported
Jan 1 01:00:30 voipd[556]: Couldn't load shared library libspeex.so - File not found - Not a direc)
Jan 1 01:00:30 voipd[556]: VoIP led value = 0
Jan 1 01:00:30 voipd[556]: no useragent configured
Jan 1 01:00:30 voipd[556]: INFO led: off (value=0)
Jan 1 01:00:30 voipd[556]: VoIP SRTP led value = 0
Jan 1 01:00:30 voipd[556]: priority is -20
Jan 1 01:00:30 voipd[556]: encaplen 32
Jan 1 01:00:30 voipd[556]: brutto speed unknown
Jan 1 01:00:30 voipd[556]: connstatus 0 -> 0
Jan 1 01:00:30 voipd[556]: PCMA/8000/1: 98933 bits/second (encaplen=32,30ms)
Jan 1 01:00:30 voipd[556]: PCMU/8000/1: 98933 bits/second (encaplen=32,30ms)
Jan 1 01:00:30 voipd[556]: G726-32/8000/1: 70666 bits/second (encaplen=32,30ms)
Jan 1 01:00:30 voipd[556]: G726-40/8000/1: 70666 bits/second (encaplen=32,30ms)
Jan 1 01:00:30 voipd[556]: G726-24/8000/1: 56533 bits/second (encaplen=32,30ms)
Jan 1 01:00:30 voipd[556]: iLBC/8000/1: 42400 bits/second (encaplen=32,30ms)
Jan 1 01:00:30 voipd[556]: G729/8000/1: 42400 bits/second (encaplen=32,30ms)
Jan 1 01:00:30 voipd[556]: PCMA/16000/1: 197866 bits/second (encaplen=32,30ms)
Jan 1 01:00:30 voipd[556]: PCMU/16000/1: 197866 bits/second (encaplen=32,30ms)
Jan 1 01:00:30 voipd[556]: PCMA/8000/1: 106000 bits/second (encaplen=32,20ms)
Jan 1 01:00:30 voipd[556]: PCMU/8000/1: 106000 bits/second (encaplen=32,20ms)
Jan 1 01:00:30 voipd[556]: G726-32/8000/1: 84800 bits/second (encaplen=32,20ms)
Jan 1 01:00:30 voipd[556]: G726-40/8000/1: 84800 bits/second (encaplen=32,20ms)
Jan 1 01:00:30 voipd[556]: G726-24/8000/1: 63600 bits/second (encaplen=32,20ms)
Jan 1 01:00:30 voipd[556]: iLBC/8000/1: 63600 bits/second (encaplen=32,20ms)
Jan 1 01:00:30 voipd[556]: G729/8000/1: 63600 bits/second (encaplen=32,20ms)
Jan 1 01:00:30 voipd[556]: PCMA/16000/1: 212000 bits/second (encaplen=32,20ms)
Jan 1 01:00:30 voipd[556]: PCMU/16000/1: 212000 bits/second (encaplen=32,20ms)
Jan 1 01:00:30 voipd[556]: verbose: DISABLED
run_clock demon started
AR7WDT: System Init UEberwachung abgeschlossen (90140 ms noch verfuegbar)
SysRq : Changing Loglevel
Loglevel set to 4
rc.mod version ds26-pre16-1136M
crond is disabled
telnetd is disabled
Starting webinterface...done.
[4294940876]DSP: XDU=33554434 OVR=0 MIPS_OVR=0
Starting syslogd...done.
checkmaild is disabled
cifsmount is disabled
Starting ssh server...done.
dtmfbox is disabled
Looking for user 'samba'...ok.
Starting samba nmbd...done.
Starting samba smbd...done.
Setting up virtual network interface ... done.
Please press Enter to activate this console.
BusyBox v1.7.2 (2007-09-30 21:19:30 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
[4294941877]DSP: XDU=33554433 OVR=0 MIPS_OVR=1
ermittle die aktuelle TTY
tty is "/dev/ttyS0"
Serielles Terminal