Public feed
#725190
smartctl version 5.30 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: WDC WD3200JB-00KFA0
Serial Number: WD-WMAMR1024394
Firmware Version: 08.05J08
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Oct 3 23:59:14 2007 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity was
suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (9600) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 116) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 190
3 Spin_Up_Time 0x0003 186 185 021 Pre-fail Always - 5666
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 274
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 17964
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 274
194 Temperature_Celsius 0x0022 104 090 000 Old_age Always - 46
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 199 199 000 Old_age Always - 60
198 Offline_Uncorrectable 0x0010 199 198 000 Old_age Offline - 58
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 199 198 051 Pre-fail Offline - 61
SMART Error Log Version: 1
ATA Error Count: 86 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Timestamp = decimal seconds since the previous disk power-on.
Note: timestamp "wraps" after 2^32 msec = 49.710 days.
Error 86 occurred at disk power-on lifetime: 13205 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 18 3d d9 c6 f0 Error: UNC 24 sectors at LBA = 0x00c6d93d = 13031741
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name
-- -- -- -- -- -- -- -- --------- --------------------
25 00 18 3d d9 c6 10 59 1816.520 READ DMA EXT
25 00 20 8d d7 c6 10 59 1816.505 READ DMA EXT
25 00 28 45 d7 c6 10 59 1816.505 READ DMA EXT
25 00 18 25 d7 c6 10 59 1816.505 READ DMA EXT
25 00 10 45 d9 c6 10 59 1818.390 READ DMA EXT
Error 85 occurred at disk power-on lifetime: 10716 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 68 ff 96 00 f0 Error: UNC 104 sectors at LBA = 0x000096ff = 38655
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name
-- -- -- -- -- -- -- -- --------- --------------------
25 00 68 ff 96 00 01 59 93263.780 READ DMA EXT
25 00 70 f7 96 00 01 59 93261.810 READ DMA EXT
25 00 78 ef 96 00 01 59 93259.850 READ DMA EXT
25 00 80 e7 96 00 01 59 93257.905 READ DMA EXT
25 00 60 07 97 00 01 59 93265.730 READ DMA EXT
Error 84 occurred at disk power-on lifetime: 10716 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 70 f7 96 00 f0 Error: UNC 112 sectors at LBA = 0x000096f7 = 38647
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name
-- -- -- -- -- -- -- -- --------- --------------------
25 00 70 f7 96 00 01 59 93261.810 READ DMA EXT
25 00 78 ef 96 00 01 59 93259.850 READ DMA EXT
25 00 80 e7 96 00 01 59 93257.905 READ DMA EXT
25 00 08 df 96 00 01 59 93255.955 READ DMA EXT
25 00 68 ff 96 00 01 59 93263.780 READ DMA EXT
Error 83 occurred at disk power-on lifetime: 10716 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 78 ef 96 00 f0 Error: UNC 120 sectors at LBA = 0x000096ef = 38639
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name
-- -- -- -- -- -- -- -- --------- --------------------
25 00 78 ef 96 00 01 59 93259.850 READ DMA EXT
25 00 80 e7 96 00 01 59 93257.905 READ DMA EXT
25 00 08 df 96 00 01 59 93255.955 READ DMA EXT
25 00 08 df 96 00 01 59 93254.005 READ DMA EXT
25 00 70 f7 96 00 01 59 93261.810 READ DMA EXT
Error 82 occurred at disk power-on lifetime: 10716 hours
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 e7 96 00 f0 Error: UNC 128 sectors at LBA = 0x000096e7 = 38631
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name
-- -- -- -- -- -- -- -- --------- --------------------
25 00 78 ef 96 00 01 59 93259.850 READ DMA EXT
25 00 80 e7 96 00 01 59 93257.905 READ DMA EXT
25 00 08 df 96 00 01 59 93255.955 READ DMA EXT
25 00 08 df 96 00 01 59 93254.005 READ DMA EXT
25 00 10 d7 96 00 01 59 93252.050 READ DMA EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]