Public feed #723852

Unnamed

public text v1 · immutable
Raw Edit
·published 2007-10-03 02:28 UTC
rendered paste body
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
    root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3192.22-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
  AMD Features=0x20100000<NX,LM>
  Logical CPUs per core: 2
real memory  = 1073479680 (1023 MB)
avail memory = 1041334272 (993 MB)
ACPI APIC Table: <DELL   PE BKC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs  cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic1: Changing APIC ID to 3
ioapic1: WARNING: intbase 32 != expected base 24
ioapic2: Changing APIC ID to 4
ioapic2: WARNING: intbase 64 != expected base 56
ioapic3: Changing APIC ID to 5
ioapic3: WARNING: intbase 96 != expected base 88 ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
ioapic3 <Version 2.0> irqs 96-119 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL PE BKC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem 0xdfdf0000-0xdfdfffff,0xdfde0000-0xdfdeffff irq 34 at device 5.0 on pci2
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.12.0
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xe800-0xe8ff mem 0xdfdd0000-0xdfddffff,0xdfdc0000-0xdfdcffff irq 33 at device 5.1 on pci2
mpt1: [GIANT-LOCKED]
mpt1: MPI Version=1.2.12.0
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0xdcc0-0xdcff mem 0xdfae0000-0xdfafffff irq 64 at device 7.0 on pci6
em0: Ethernet address: 00:14:22:1c:43:bc
pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pci7: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0xccc0-0xccff mem 0xdf8e0000-0xdf8fffff irq 65 at device 8.0 on pci7
em1: Ethernet address: 00:14:22:1c:43:bd
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 0.2 on pci8
pci10: <ACPI PCI bus> on pcib10
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xace0-0xacff irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xacc0-0xacdf irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xaca0-0xacbf irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xdff00000-0xdff003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pci11: <unknown> at device 5.0 (no driver attached)
pci11: <unknown> at device 5.1 (no driver attached)
pci11: <unknown> at device 5.2 (no driver attached)
atapci0: <SiI 0680 UDMA133 controller> port 0xbcf0-0xbcf7,0xbce4-0xbce7,0xbcd8-0xbcdf,0xbcd0-0xbcd3,0xbc70-0xbc7f mem 0xdf4fec00-0xdf4fecff irq 23 at device 6.0 on pci11
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pci11: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd0fff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
kbd2 at ukbd0
ums0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
Timecounters tick every 1.000 msec
acd0: DVDROM <TEAC DVD-ROM DV-28E-C/D.4E> at ata0-master UDMA33
device_attach: afd0 attach returned 6
acd1: CDROM <VIRTUALCDROM DRIVE/> at ata2-slave PIO3 Waiting 5 seconds for SCSI devices to settle ses0 at mpt0 bus 0 target 6 lun 0
ses0: <PE/PV 1x6 SCSI BP 1.0> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
SMP: AP CPU #1 Launched!
da0 at mpt0 bus 0 target 0 lun 0
da0: <FUJITSU MAT3073NC 5704> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 70007MB (143374650 512 byte sectors: 255H 63S/T 8924C) Trying to mount root from ufs:/dev/da0s1a
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging disabled