All pastes #720651 Raw Edit

Mine

public text v1 · immutable
#720651 ·published 2007-09-30 15:38 UTC
rendered paste body
Starting OPIE2



root@magician:/opt/Qtopia/plugins/multiplexers$ Starting Qtopia....
QVNCServer created on port 5900
***Loaded htc buttons plugin!
Modem :  opening serial device  "/dev/ttyS1"  at  115200
Modem :  Device: "/dev/ttyS1" is a tty device: True
Modem :  NONBLOCK successfully reset
Modem :  Opened  "/dev/ttyS1"
Modem :  querying multiplexer plugin "htcphonemultiplex"
AtChat :  T : "ATE0"
Segmentation fault


AND here is DMESG:

<7>[ 4755.820000] DBG <7>(43)GSM Version : 1.12.00 G23 Version : 1337.42
<7>[ 4755.820000] n_tihtc_poll called
<7>[ 4755.850000] n_tihtc_tty_receive called (count=34)
<7>[ 4755.850000] (34)\x2\x2\x16AT-Command Interpreter ready\r\n\x2
<7>[ 4755.850000] tihtc_filter called
<7>[ 4755.850000] starting frame (channel 0x16) at 2
<7>[ 4755.850000] AT  <7>(30)AT-Command Interpreter ready\r\n
<7>[ 4755.850000] DBG <7>(43)GSM Version : 1.12.00 G23 Version : 1337.42
<7>[ 4755.860000] n_tihtc_poll called
<7>[ 4755.860000] n_tihtc_tty_read called
<7>[ 4755.860000] channel rx: ATCMD
<4>[ 4755.860000] Alignment trap: qpe (2065) PC=0x40fdc04c Instr=0xe5943000 Address=0x6e616d6d FSR 0x0f3
<4>[ 4755.870000] toppoly LCD power off
<7>[ 4755.870000] toppoly power off
<4>[ 4755.890000] egpio clear: reg 0 = 0x0064
<4>[ 4755.900000] toppoly LCD power on
<7>[ 4755.900000] toppoly power on
<4>[ 4755.900000] egpio set: reg 0 = 0x0064
<4>[ 4755.900000] egpio set: reg 0 = 0x00e4
<5>[ 4755.930000] magician configure phone: PRE_SHUTDOWN
<4>[ 4755.940000] GSM Off
<4>[ 4755.940000] magician_phone: got gpio 10 irq 0
<4>[ 4755.940000] egpio clear: reg 2 = 0x0021
<7>[ 4755.940000] n_tihtc_close called
<7>[ 4755.940000] n_tihtc_close success
<5>[ 4795.570000] magician configure phone: PRE_STARTUP
<4>[ 4795.570000] GSM Reset
<4>[ 4795.570000] egpio set: reg 2 = 0x00a1
<4>[ 4795.820000] magician_phone: got gpio 10 irq 1
<4>[ 4795.820000] magician_phone: got gpio 108 irq 1
<5>[ 4796.100000] magician configure phone: POST_STARTUP
<7>[ 4796.150000] n_tihtc_open called (device=ttyS1)
<7>[ 4796.150000] n_tihtc_open success
<7>[ 4796.160000] n_tihtc_tty_ioctl called 400455c8
<7>[ 4796.160000] n_tihtc_tty_ioctl called 400455c8
<7>[ 4796.160000] n_tihtc_tty_ioctl called 540b
<7>[ 4796.170000] n_tihtc_write called (count=4)
<7>[ 4796.170000] channel tx: ATCMD
<7>[ 4796.170000] (7)\x2\x16ATE0\x2
<7>[ 4796.170000] n_tihtc_write called (count=1)
<7>[ 4796.170000] channel tx: ATCMD
<7>[ 4796.170000] (4)\x2\x16\r\x2
<7>[ 4796.180000] n_tihtc_poll called
<4>[ 4796.830000] magician_phone: got gpio 10 irq 1
<4>[ 4796.830000] magician_phone: got gpio 108 irq 1
<7>[ 4797.160000] n_tihtc_tty_receive called (count=16)
<7>[ 4797.160000] (16)\x2\x2\x2\x12GSM Version
<7>[ 4797.160000] tihtc_filter called
<7>[ 4797.160000] starting frame (channel 0x12) at 3
<7>[ 4797.160000] DBG <7>(12)GSM Version
<7>[ 4797.160000] n_tihtc_poll called
<7>[ 4797.170000] n_tihtc_tty_receive called (count=32)
<7>[ 4797.170000] (32): 1.12.00 G23 Version : 1337.42\x2
<7>[ 4797.170000] tihtc_filter called
<7>[ 4797.170000] resuming frame (channel 0x12)
<7>[ 4797.170000] DBG <7>(43)GSM Version : 1.12.00 G23 Version : 1337.42
<7>[ 4797.170000] n_tihtc_poll called
<7>[ 4797.200000] n_tihtc_tty_receive called (count=34)
<7>[ 4797.200000] (34)\x2\x2\x16AT-Command Interpreter ready\r\n\x2
<7>[ 4797.200000] tihtc_filter called
<7>[ 4797.200000] starting frame (channel 0x16) at 2
<7>[ 4797.200000] AT  <7>(30)AT-Command Interpreter ready\r\n
<7>[ 4797.200000] DBG <7>(43)GSM Version : 1.12.00 G23 Version : 1337.42
<7>[ 4797.210000] n_tihtc_poll called
<7>[ 4797.210000] n_tihtc_tty_read called
<7>[ 4797.210000] channel rx: ATCMD
<4>[ 4797.210000] Alignment trap: qpe (2081) PC=0x40fdc04c Instr=0xe5943000 Address=0x6e616d6d FSR 0x0f3
<4>[ 4797.220000] toppoly LCD power off
<7>[ 4797.220000] toppoly power off
<4>[ 4797.240000] egpio clear: reg 0 = 0x0064
<4>[ 4797.250000] toppoly LCD power on
<7>[ 4797.250000] toppoly power on
<4>[ 4797.250000] egpio set: reg 0 = 0x0064
<4>[ 4797.250000] egpio set: reg 0 = 0x00e4
<5>[ 4797.280000] magician configure phone: PRE_SHUTDOWN
<4>[ 4797.290000] GSM Off
<4>[ 4797.290000] magician_phone: got gpio 10 irq 0
<4>[ 4797.290000] egpio clear: reg 2 = 0x0021
<7>[ 4797.290000] n_tihtc_close called
<7>[ 4797.290000] n_tihtc_close success
root@magician:/opt/Qtopia/plugins/multiplexers$