make[5]: Nothing to be done for `all-am'.
make[5]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd'
make[4]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd'
Making all in linux
make[4]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/linux'
Making all in probing
make[5]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/linux/probing'
gcc -DHAVE_CONFIG_H -I. -I../../.. -DPACKAGE_SYSCONF_DIR=\""/home/chintu/src/opt/gnome/etc"\" -DPACKAGE_DATA_DIR=\""/home/chintu/src/opt/gnome/share"\" -DPACKAGE_BIN_DIR=\""/home/chintu/src/opt/gnome/bin"\" -DPACKAGE_LOCALE_DIR=\""/home/chintu/src/opt/gnome/share/locale"\" -DPACKAGE_LOCALSTATEDIR=\""/home/chintu/src/opt/gnome/var"\" -I../../.. -I/home/chintu/src/opt/gnome/include/glib-2.0 -I/home/chintu/src/opt/gnome/lib/glib-2.0/include -I/home/chintu/src/opt/gnome/include/dbus-1.0 -I/home/chintu/src/opt/gnome/lib/dbus-1.0/include -I/home/chintu/src/opt/gnome/include/dbus-1.0 -I/home/chintu/src/opt/gnome/lib/dbus-1.0/include -I/home/chintu/src/opt/gnome/include -g -O2 -Wl,--allow-shlib-undefined -Wall -Wchar-subscripts -Wmissing-declarations -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare -MT probe-input.o -MD -MP -MF .deps/probe-input.Tpo -c -o probe-input.o probe-input.c
probe-input.c: In function ‘main’:
probe-input.c:74: error: ‘SW_LID’ undeclared (first use in this function)
probe-input.c:74: error: (Each undeclared identifier is reported only once
probe-input.c:74: error: for each function it appears in.)
probe-input.c:76: error: ‘SW_TABLET_MODE’ undeclared (first use in this function)
probe-input.c:78: error: ‘SW_HEADPHONE_INSERT’ undeclared (first use in this function)
make[5]: *** [probe-input.o] Error 1
make[5]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/linux/probing'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/linux'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9'
make: *** [all] Error 2
*** error during stage build of hal: ########## Error running make *** [1/26]
[1] rerun stage build
[2] ignore error and continue to install
[3] give up on module
[4] start shell
choice: 2
*** Installing hal *** [1/26]
make install
Making install in libhal
make[1]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/libhal'
make[2]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/libhal'
test -z "/home/chintu/src/opt/gnome/lib" || /bin/mkdir -p "/home/chintu/src/opt/gnome/lib"
/bin/sh ../libtool --mode=install /home/chintu/bin/install-check 'libhal.la' '/home/chintu/src/opt/gnome/lib/libhal.la'
/home/chintu/bin/install-check .libs/libhal.so.1.0.0 /home/chintu/src/opt/gnome/lib/libhal.so.1.0.0
(cd /home/chintu/src/opt/gnome/lib && { ln -s -f libhal.so.1.0.0 libhal.so.1 || { rm -f libhal.so.1 && ln -s libhal.so.1.0.0 libhal.so.1; }; })
(cd /home/chintu/src/opt/gnome/lib && { ln -s -f libhal.so.1.0.0 libhal.so || { rm -f libhal.so && ln -s libhal.so.1.0.0 libhal.so; }; })
/home/chintu/bin/install-check .libs/libhal.lai /home/chintu/src/opt/gnome/lib/libhal.la
PATH="$PATH:/sbin" ldconfig -n /home/chintu/src/opt/gnome/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/chintu/src/opt/gnome/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,--rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
test -z "/home/chintu/src/opt/gnome/include/hal" || /bin/mkdir -p "/home/chintu/src/opt/gnome/include/hal"
/home/chintu/bin/install-check -m 644 'libhal.h' '/home/chintu/src/opt/gnome/include/hal/libhal.h'
make[2]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/libhal'
make[1]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/libhal'
Making install in libhal-storage
make[1]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/libhal-storage'
make[2]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/libhal-storage'
test -z "/home/chintu/src/opt/gnome/lib" || /bin/mkdir -p "/home/chintu/src/opt/gnome/lib"
/bin/sh ../libtool --mode=install /home/chintu/bin/install-check 'libhal-storage.la' '/home/chintu/src/opt/gnome/lib/libhal-storage.la'
libtool: install: warning: relinking `libhal-storage.la'
(cd /home/chintu/src/svn/gnome/hal-0.5.9/libhal-storage; /bin/sh ../libtool --tag=CC --mode=relink gcc -g -O2 -Wl,--allow-shlib-undefined -Wall -Wchar-subscripts -Wmissing-declarations -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare -version-info 1:0:0 -Wl,--as-needed -o libhal-storage.la -rpath /home/chintu/src/opt/gnome/lib libhal-storage.lo -L/home/chintu/src/opt/gnome/lib -ldbus-1 ../libhal/libhal.la )
gcc -shared .libs/libhal-storage.o -Wl,--rpath -Wl,/home/chintu/src/opt/gnome/lib -L/home/chintu/src/opt/gnome/lib -ldbus-1 -lhal -Wl,--allow-shlib-undefined -Wl,--as-needed -Wl,-soname -Wl,libhal-storage.so.1 -o .libs/libhal-storage.so.1.0.0
/home/chintu/bin/install-check .libs/libhal-storage.so.1.0.0T /home/chintu/src/opt/gnome/lib/libhal-storage.so.1.0.0
(cd /home/chintu/src/opt/gnome/lib && { ln -s -f libhal-storage.so.1.0.0 libhal-storage.so.1 || { rm -f libhal-storage.so.1 && ln -s libhal-storage.so.1.0.0 libhal-storage.so.1; }; })
(cd /home/chintu/src/opt/gnome/lib && { ln -s -f libhal-storage.so.1.0.0 libhal-storage.so || { rm -f libhal-storage.so && ln -s libhal-storage.so.1.0.0 libhal-storage.so; }; })
/home/chintu/bin/install-check .libs/libhal-storage.lai /home/chintu/src/opt/gnome/lib/libhal-storage.la
PATH="$PATH:/sbin" ldconfig -n /home/chintu/src/opt/gnome/lib
----------------------------------------------------------------------
Libraries have been installed in:
/home/chintu/src/opt/gnome/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,--rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
test -z "/home/chintu/src/opt/gnome/include/hal" || /bin/mkdir -p "/home/chintu/src/opt/gnome/include/hal"
/home/chintu/bin/install-check -m 644 'libhal-storage.h' '/home/chintu/src/opt/gnome/include/hal/libhal-storage.h'
make[2]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/libhal-storage'
make[1]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/libhal-storage'
Making install in partutil
make[1]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/partutil'
make[2]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/partutil'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/partutil'
make[1]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/partutil'
Making install in hald
make[1]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald'
make install-recursive
make[2]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald'
Making install in dummy
make[3]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/dummy'
make[4]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/dummy'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/dummy'
make[3]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/dummy'
Making install in freebsd
make[3]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd'
Making install in libprobe
make[4]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd/libprobe'
make[5]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd/libprobe'
test -z "/home/chintu/src/opt/gnome/lib" || /bin/mkdir -p "/home/chintu/src/opt/gnome/lib"
make[5]: Nothing to be done for `install-data-am'.
make[5]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd/libprobe'
make[4]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd/libprobe'
Making install in probing
make[4]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd/probing'
make[5]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd/probing'
test -z "/home/chintu/src/opt/gnome/libexec" || /bin/mkdir -p "/home/chintu/src/opt/gnome/libexec"
make[5]: Nothing to be done for `install-data-am'.
make[5]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd/probing'
make[4]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd/probing'
Making install in addons
make[4]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd/addons'
make[5]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd/addons'
test -z "/home/chintu/src/opt/gnome/libexec" || /bin/mkdir -p "/home/chintu/src/opt/gnome/libexec"
make[5]: Nothing to be done for `install-data-am'.
make[5]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd/addons'
make[4]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd/addons'
Making install in .
make[4]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd'
make[5]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd'
make[5]: Nothing to be done for `install-exec-am'.
make[5]: Nothing to be done for `install-data-am'.
make[5]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd'
make[4]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd'
make[3]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/freebsd'
Making install in linux
make[3]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/linux'
Making install in probing
make[4]: Entering directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/linux/probing'
gcc -DHAVE_CONFIG_H -I. -I../../.. -DPACKAGE_SYSCONF_DIR=\""/home/chintu/src/opt/gnome/etc"\" -DPACKAGE_DATA_DIR=\""/home/chintu/src/opt/gnome/share"\" -DPACKAGE_BIN_DIR=\""/home/chintu/src/opt/gnome/bin"\" -DPACKAGE_LOCALE_DIR=\""/home/chintu/src/opt/gnome/share/locale"\" -DPACKAGE_LOCALSTATEDIR=\""/home/chintu/src/opt/gnome/var"\" -I../../.. -I/home/chintu/src/opt/gnome/include/glib-2.0 -I/home/chintu/src/opt/gnome/lib/glib-2.0/include -I/home/chintu/src/opt/gnome/include/dbus-1.0 -I/home/chintu/src/opt/gnome/lib/dbus-1.0/include -I/home/chintu/src/opt/gnome/include/dbus-1.0 -I/home/chintu/src/opt/gnome/lib/dbus-1.0/include -I/home/chintu/src/opt/gnome/include -g -O2 -Wl,--allow-shlib-undefined -Wall -Wchar-subscripts -Wmissing-declarations -Wnested-externs -Wpointer-arith -Wcast-align -Wsign-compare -MT probe-input.o -MD -MP -MF .deps/probe-input.Tpo -c -o probe-input.o probe-input.c
probe-input.c: In function ‘main’:
probe-input.c:74: error: ‘SW_LID’ undeclared (first use in this function)
probe-input.c:74: error: (Each undeclared identifier is reported only once
probe-input.c:74: error: for each function it appears in.)
probe-input.c:76: error: ‘SW_TABLET_MODE’ undeclared (first use in this function)
probe-input.c:78: error: ‘SW_HEADPHONE_INSERT’ undeclared (first use in this function)
make[4]: *** [probe-input.o] Error 1
make[4]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/linux/probing'
make[3]: *** [install-recursive] Error 1
make[3]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald/linux'
make[2]: *** [install-recursive] Error 1
make[2]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/chintu/src/svn/gnome/hal-0.5.9/hald'
make: *** [install-recursive] Error 1
*** error during stage install of hal: ########## Error running make install *** [1/26]
[1] rerun stage install
[2] ignore error and continue to done
[3] give up on module
[4] start shell
choice: