rendered paste body[ 25.809387] Early unpacking initramfs... done
[ 26.715850] ACPI: Core revision 20060707
[ 26.716347] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 26.723202] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 01
[ 26.723328] Total of 1 processors activated (4815.95 BogoMIPS).
[ 26.724475] ENABLING IO-APIC IRQs
[ 26.724926] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 26.871364] Brought up 1 CPUs
[ 26.872129] Booting paravirtualized kernel on bare hardware
[ 26.872365] Time: 22:54:47 Date: 08/27/107
[ 26.872448] NET: Registered protocol family 16
[ 26.872714] EISA bus registered
[ 26.872728] ACPI: bus type pci registered
[ 26.872933] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 26.872940] PCI: Using configuration type 1
[ 26.872946] Setting up standard PCI resources
[ 26.903490] ACPI: Interpreter enabled
[ 26.903503] ACPI: Using IOAPIC for interrupt routing
[ 26.907497] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 26.907516] PCI: Probing PCI hardware (bus 00)
[ 26.911354] Boot video device is 0000:01:00.0
[ 26.911535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 26.956074] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 26.976810] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 26.977588] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 26.978361] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 26.979192] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 26.980143] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 26.980915] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 26.981687] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 26.982465] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 26.982718] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 26.982761] pnp: PnP ACPI init
[ 26.997324] pnp: PnP ACPI: found 13 devices
[ 26.997337] PnPBIOS: Disabled by ACPI PNP
[ 26.997486] PCI: Using ACPI for IRQ routing
[ 26.997498] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 26.997552] PCI: Cannot allocate resource region 1 of device 0000:00:09.0
[ 27.011757] NET: Registered protocol family 8
[ 27.011768] NET: Registered protocol family 20
[ 27.014620] PCI: Bridge: 0000:00:01.0
[ 27.014627] IO window: disabled.
[ 27.014646] MEM window: fca00000-feafffff
[ 27.014659] PREFETCH window: e7f00000-efefffff
[ 27.014718] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 27.014785] NET: Registered protocol family 2
[ 27.051068] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 27.051163] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 27.051266] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 27.051316] TCP: Hash tables configured (established 16384 bind 8192)
[ 27.051319] TCP reno registered
[ 27.063112] checking if image is initramfs... it is
[ 28.831183] Freeing initrd memory: 6790k freed
[ 28.832695] audit: initializing netlink socket (disabled)
[ 28.832735] audit(1190933688.228:1): initialized
[ 28.833111] VFS: Disk quotas dquot_6.5.1
[ 28.833175] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 28.833319] io scheduler noop registered
[ 28.833327] io scheduler anticipatory registered
[ 28.833334] io scheduler deadline registered
[ 28.833364] io scheduler cfq registered (default)
[ 28.833556] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 28.834233] isapnp: Scanning for PnP cards...
[ 29.190276] isapnp: No Plug & Play device found
[ 29.272171] Real Time Clock Driver v1.12ac
[ 29.272335] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 29.272659] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.274866] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 29.275421] mice: PS/2 mouse device common for all mice
[ 29.277344] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 29.278084] input: Macintosh mouse button emulation as /class/input/input0
[ 29.278214] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 29.278228] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 29.279011] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 29.279962] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 29.279980] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 29.280349] EISA: Probing bus 0 at eisa.0
[ 29.280453] EISA: Detected 0 cards.
[ 29.310956] TCP cubic registered
[ 29.310981] NET: Registered protocol family 1
[ 29.311047] Using IPI No-Shortcut mode
[ 29.311262] ACPI: (supports S0 S1 S3 S4 S5)
[ 29.311398] Magic number: 7:274:958
[ 29.311471] Time: tsc clocksource has been installed.
[ 29.311772] hash matches device ptyzf
[ 29.311980] hash matches device oldmem
[ 29.312626] Freeing unused kernel memory: 328k freed
[ 29.329833] input: AT Translated Set 2 keyboard as /class/input/input1
[ 30.924129] Capability LSM initialized
[ 30.993642] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 32.248736] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[ 32.248871] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 32.248947] via-rhine: Woke system up. Reason: Unknown.
[ 32.248967] via-rhine: Reset not complete yet. Trying harder.
[ 32.256385] Invalid MAC address
[ 32.256409] via-rhine: probe of 0000:00:09.0 failed with error -5
[ 32.256493] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 17
[ 32.256729] eth0: VIA Rhine II at 0x1d400, 00:0b:6a:e8:ee:bd, IRQ 17.
[ 32.257500] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 32.299292] SCSI subsystem initialized
[ 32.379296] libata version 2.20 loaded.
[ 32.384211] sata_via 0000:00:0f.0: version 2.1
[ 32.384284] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 18
[ 32.384350] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 32.384520] ata1: SATA max UDMA/133 cmd 0x0001ec00 ctl 0x0001e802 bmdma 0x0001dc00 irq 18
[ 32.384607] ata2: SATA max UDMA/133 cmd 0x0001e400 ctl 0x0001e002 bmdma 0x0001dc08 irq 18
[ 32.384656] scsi0 : sata_via
[ 32.407460] usbcore: registered new interface driver usbfs
[ 32.407537] usbcore: registered new interface driver hub
[ 32.407621] usbcore: registered new device driver usb
[ 32.410349] USB Universal Host Controller Interface driver v3.0
[ 32.586453] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 32.599340] ATA: abnormal status 0x7F on port 0x0001ec07
[ 32.599487] scsi1 : sata_via
[ 32.802135] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 32.815016] ATA: abnormal status 0x7F on port 0x0001e407
[ 32.818040] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 19
[ 32.818145] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 32.818602] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 32.818684] uhci_hcd 0000:00:10.0: irq 19, io base 0x0000bc00
[ 32.819023] usb usb1: configuration #1 chosen from 1 choice
[ 32.819125] hub 1-0:1.0: USB hub found
[ 32.819146] hub 1-0:1.0: 2 ports detected
[ 32.922439] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 19
[ 32.922483] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 32.922574] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 32.922635] uhci_hcd 0000:00:10.1: irq 19, io base 0x0000c000
[ 32.922913] usb usb2: configuration #1 chosen from 1 choice
[ 32.922998] hub 2-0:1.0: USB hub found
[ 32.923023] hub 2-0:1.0: 2 ports detected
[ 32.938833] Floppy drive(s): fd0 is 1.44M
[ 33.002400] FDC 0 is a post-1991 82077
[ 33.026168] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19
[ 33.026212] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 33.026289] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 33.026354] uhci_hcd 0000:00:10.2: irq 19, io base 0x0000c400
[ 33.026641] usb usb3: configuration #1 chosen from 1 choice
[ 33.026725] hub 3-0:1.0: USB hub found
[ 33.026751] hub 3-0:1.0: 2 ports detected
[ 33.129743] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 19
[ 33.129760] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 33.129791] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 33.129818] uhci_hcd 0000:00:10.3: irq 19, io base 0x0000cc00
[ 33.129925] usb usb4: configuration #1 chosen from 1 choice
[ 33.129962] hub 4-0:1.0: USB hub found
[ 33.129970] hub 4-0:1.0: 2 ports detected
[ 33.233681] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 19
[ 33.233699] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 33.233729] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 33.233774] ehci_hcd 0000:00:10.4: irq 19, io mem 0xfebff800
[ 33.233783] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 33.233887] usb usb5: configuration #1 chosen from 1 choice
[ 33.233919] hub 5-0:1.0: USB hub found
[ 33.233929] hub 5-0:1.0: 8 ports detected
[ 33.289389] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 33.340231] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 33.340297] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 18
[ 33.340337] VP_IDE: chipset revision 6
[ 33.340348] VP_IDE: not 100% native mode: will probe irqs later
[ 33.340383] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 33.340409] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[ 33.340449] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
[ 33.340468] Probing IDE interface ide0...
[ 33.756723] hda: HDS728080PLAT20, ATA DISK drive
[ 34.427889] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 34.438926] Probing IDE interface ide1...
[ 34.727128] usb 5-5: new high speed USB device using ehci_hcd and address 4
[ 34.861551] usb 5-5: configuration #1 chosen from 1 choice
[ 35.098563] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 35.288998] usb 1-2: configuration #1 chosen from 1 choice
[ 35.302354] hdc: HL-DT-STDVDRRW GWA-4164B, ATAPI CD/DVD-ROM drive
[ 35.529892] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 35.691487] usb 2-2: configuration #1 chosen from 1 choice
[ 35.694620] usbcore: registered new interface driver libusual
[ 35.699184] Initializing USB Mass Storage driver...
[ 35.699260] scsi2 : SCSI emulation for USB Mass Storage devices
[ 35.699315] usb-storage: device found at 4
[ 35.699318] usb-storage: waiting for device to settle before scanning
[ 35.699335] usbcore: registered new interface driver usb-storage
[ 35.699338] USB Mass Storage support registered.
[ 36.113098] hdd: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
[ 36.173517] ide1 at 0x170-0x177,0x376 on irq 15
[ 36.186572] hda: max request size: 512KiB
[ 36.199745] hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133)
[ 36.201566] hda: cache flushes supported
[ 36.201625] hda: hda1 hda2
[ 36.227590] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 36.227622] Uniform CD-ROM driver Revision: 3.20
[ 36.246727] hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
[ 36.518103] Attempting manual resume
[ 36.518109] swsusp: Resume From Partition 3:1
[ 36.518111] PM: Checking swsusp image.
[ 36.518230] PM: Resume from disk failed.
[ 36.576535] kjournald starting. Commit interval 5 seconds
[ 36.576549] EXT3-fs: mounted filesystem with ordered data mode.
[ 40.694029] usb-storage: device scan complete
[ 40.696643] scsi 2:0:0:0: Direct-Access HTS42121 0H9AT00 0000 PQ: 0 ANSI: 0
[ 45.470940] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 47.045411] NET: Registered protocol family 17
[ 50.099405] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 50.103752] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 51.519549] Linux agpgart interface v0.102 (c) Dave Jones
[ 51.767919] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[ 51.780088] agpgart: AGP aperture is 64M @ 0xf4000000
[ 53.275356] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 20
[ 53.282581] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 53.348442] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x413C pid 0x5008
[ 53.348495] usbcore: registered new interface driver usblp
[ 53.348508] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 53.405370] input: PC Speaker as /class/input/input2
[ 54.044891] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 54.237031] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 54.239693] sda: Write Protect is off
[ 54.239701] sda: Mode Sense: 27 00 00 00
[ 54.239708] sda: assuming drive cache: write through
[ 54.245090] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[ 54.250775] sda: Write Protect is off
[ 54.250787] sda: Mode Sense: 27 00 00 00
[ 54.250794] sda: assuming drive cache: write through
[ 54.250807] sda:<6>Linux video capture interface: v2.00
[ 54.300119] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20
[ 54.300335] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 54.345540] parport: PnPBIOS parport detected.
[ 54.345830] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 54.422815] ubuntu/media/gspcav1/gspca_core.c: USB SPCA5XX camera found. SONIX sn9c10[1 2]
[ 54.424782] usbcore: registered new interface driver gspca
[ 54.424810] ubuntu/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 54.469844] sn9c102: V4L2 driver for SN9C10x PC Camera Controllers v1:1.27
[ 54.469973] usbcore: registered new interface driver sn9c102
[ 54.651938] sda1
[ 54.652293] sd 2:0:0:0: Attached scsi disk sda
[ 54.682205] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 55.796707] fuse init (API version 7.8)
[ 55.851276] lp0: using parport0 (interrupt-driven).
[ 55.937795] Adding 5662872k swap on /dev/disk/by-uuid/b8b0d291-0cdd-40b5-b79c-180bca5a2572. Priority:-1 extents:1 across:5662872k
[ 56.104356] EXT3 FS on hda2, internal journal
[ 56.433284] NET: Registered protocol family 10
[ 56.433564] lo: Disabled Privacy Extensions
[ 62.894072] PPP generic driver version 2.4.2
[ 63.149173] NET: Registered protocol family 24
[ 63.718492] input: Power Button (FF) as /class/input/input4
[ 63.719141] ACPI: Power Button (FF) [PWRF]
[ 63.750523] input: Power Button (CM) as /class/input/input5
[ 63.751164] ACPI: Power Button (CM) [PWRB]
[ 63.953646] Using specific hotkey driver
[ 64.112182] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 64.612040] ibm_acpi: ec object not found
[ 64.699386] No dock devices found.
[ 64.803410] pcc_acpi: loading...
[ 67.073173] eth0: no IPv6 routers present
[ 71.226895] [drm] Initialized drm 1.1.0 20060810
[ 71.301644] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
[ 71.310258] [drm] Initialized via 2.11.0 20061227 on minor 0
[ 71.339263] ppdev: user-space parallel port driver
[ 71.355638] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 71.355913] agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8 mode.
[ 71.356102] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 71.356367] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 71.367046] [drm:via_mem_alloc] *ERROR* Attempt to allocate from uninitialized memory manager.
[ 72.830647] apm: BIOS not found.
[ 73.121444] Bluetooth: Core ver 2.11
[ 73.121644] NET: Registered protocol family 31
[ 73.121651] Bluetooth: HCI device and connection manager initialized
[ 73.121663] Bluetooth: HCI socket layer initialized
[ 73.195593] Bluetooth: L2CAP ver 2.8
[ 73.195611] Bluetooth: L2CAP socket layer initialized
[ 73.285769] Bluetooth: RFCOMM socket layer initialized
[ 73.285809] Bluetooth: RFCOMM TTY layer initialized
[ 73.285816] Bluetooth: RFCOMM ver 1.8
[ 82.357536] eth0: no IPv6 routers present
[ 5367.156990] usb 1-1: new full speed USB device using uhci_hcd and address 4
[ 5367.324690] usb 1-1: configuration #1 chosen from 1 choice
[ 5493.226254] usb 1-1: USB disconnect, address 4
[ 5660.535735] usb 1-1: new full speed USB device using uhci_hcd and address 5
[ 5660.703581] usb 1-1: configuration #1 chosen from 1 choice
[ 5785.850168] usb 1-1: USB disconnect, address 5
[ 6183.419933] usb 1-1: new full speed USB device using uhci_hcd and address 6
[ 6183.587274] usb 1-1: configuration #1 chosen from 1 choice
[ 6187.457735] usb 1-1: USB disconnect, address 6
[ 6256.890424] usb 1-1: new full speed USB device using uhci_hcd and address 7
[ 6257.057312] usb 1-1: configuration #1 chosen from 1 choice
[ 6312.508541] usb 1-1: USB disconnect, address 7
[ 6393.012128] usb 1-1: new full speed USB device using uhci_hcd and address 8
[ 6393.179288] usb 1-1: configuration #1 chosen from 1 choice
[ 6396.546697] usb 1-1: USB disconnect, address 8
[ 6418.676478] usb 1-1: new full speed USB device using uhci_hcd and address 9
[ 6418.844117] usb 1-1: configuration #1 chosen from 1 choice
[ 6543.487717] usb 1-1: USB disconnect, address 9
[ 8032.846729] usb 1-1: new full speed USB device using uhci_hcd and address 10
[ 8033.014043] usb 1-1: configuration #1 chosen from 1 choice
[ 8158.412770] usb 1-1: USB disconnect, address 10
[ 8329.280765] usb 1-1: new full speed USB device using uhci_hcd and address 11
[ 8329.456123] usb 1-1: configuration #1 chosen from 1 choice
[ 8332.563721] usb 1-1: USB disconnect, address 11
[ 8394.951316] usb 1-1: new full speed USB device using uhci_hcd and address 12
[ 8395.118370] usb 1-1: configuration #1 chosen from 1 choice
[ 8399.240725] usb 1-1: USB disconnect, address 12
[ 8491.066819] usb 1-1: new full speed USB device using uhci_hcd and address 13
[ 8491.233949] usb 1-1: configuration #1 chosen from 1 choice
[ 8494.852992] usb 1-1: USB disconnect, address 13
[ 8571.834043] usb 1-1: new full speed USB device using uhci_hcd and address 14
[ 8572.001554] usb 1-1: configuration #1 chosen from 1 choice
[ 8575.620223] usb 1-1: USB disconnect, address 14
[10063.964824] usb 1-1: new full speed USB device using uhci_hcd and address 15
[10064.132447] usb 1-1: configuration #1 chosen from 1 choice
[10161.602014] usb 1-1: USB disconnect, address 15
[10163.854513] usb 1-1: new full speed USB device using uhci_hcd and address 16
[10164.022118] usb 1-1: configuration #1 chosen from 1 choice
[10164.872956] usb 1-1: USB disconnect, address 16
[10275.569914] usb 1-1: new full speed USB device using uhci_hcd and address 17
[10275.737297] usb 1-1: configuration #1 chosen from 1 choice
[10411.452039] usb 1-1: USB disconnect, address 17
[12322.579533] usb 1-1: new full speed USB device using uhci_hcd and address 18
[12322.746098] usb 1-1: configuration #1 chosen from 1 choice
[12459.036806] usb 1-1: USB disconnect, address 18
[12547.591884] usb 1-1: new full speed USB device using uhci_hcd and address 19
[12547.767957] usb 1-1: configuration #1 chosen from 1 choice
[12550.874859] usb 1-1: USB disconnect, address 19
[13324.148117] usb 1-1: new full speed USB device using uhci_hcd and address 20
[13324.314689] usb 1-1: configuration #1 chosen from 1 choice
[13449.714222] usb 1-1: USB disconnect, address 20
[13932.795854] usb 1-1: new full speed USB device using uhci_hcd and address 21
[13932.962207] usb 1-1: configuration #1 chosen from 1 choice
[13942.872349] usb 1-1: USB disconnect, address 21
[13951.192766] usb 1-1: new full speed USB device using uhci_hcd and address 22
[13951.357429] usb 1-1: configuration #1 chosen from 1 choice
[14087.097577] usb 1-1: USB disconnect, address 22
[14151.254966] usb 1-1: new full speed USB device using uhci_hcd and address 23
[14151.424307] usb 1-1: configuration #1 chosen from 1 choice
[14198.812963] usb 1-1: USB disconnect, address 23
[14212.387926] usb 1-1: new full speed USB device using uhci_hcd and address 24
[14212.553634] usb 1-1: configuration #1 chosen from 1 choice
[14253.915850] usb 1-1: USB disconnect, address 24
[14257.174717] usb 1-1: new full speed USB device using uhci_hcd and address 25
[14257.339566] usb 1-1: configuration #1 chosen from 1 choice
[14286.625283] usb 1-1: USB disconnect, address 25
[14368.890138] usb 1-1: new full speed USB device using uhci_hcd and address 26
[14369.055752] usb 1-1: configuration #1 chosen from 1 choice
[14375.695682] usb 1-1: USB disconnect, address 26
[14455.444409] usb 1-1: new full speed USB device using uhci_hcd and address 27
[14455.611250] usb 1-1: configuration #1 chosen from 1 choice
[14460.488672] usb 1-1: USB disconnect, address 27
[14567.159842] usb 1-1: new full speed USB device using uhci_hcd and address 28
[14567.327454] usb 1-1: configuration #1 chosen from 1 choice
[14573.713756] usb 1-1: USB disconnect, address 28
[14647.423823] usb 1-1: new full speed USB device using uhci_hcd and address 29
[14647.590866] usb 1-1: configuration #1 chosen from 1 choice
[14654.732601] usb 1-1: USB disconnect, address 29
[14670.823670] usb 1-1: new full speed USB device using uhci_hcd and address 30
[14670.989212] usb 1-1: configuration #1 chosen from 1 choice
[14675.867961] usb 1-1: USB disconnect, address 30
[14732.971652] usb 1-1: new full speed USB device using uhci_hcd and address 31
[14733.138959] usb 1-1: configuration #1 chosen from 1 choice
[14737.764308] usb 1-1: USB disconnect, address 31
[20980.351945] usb 5-6: new high speed USB device using ehci_hcd and address 33
[20980.485837] usb 5-6: configuration #1 chosen from 2 choices
[20980.486188] scsi3 : SCSI emulation for USB Mass Storage devices
[20980.486332] usb-storage: device found at 33
[20980.486335] usb-storage: waiting for device to settle before scanning
[20985.480226] usb-storage: device scan complete
[20985.480843] scsi 3:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
[20985.482964] SCSI device sdb: 58605120 512-byte hdwr sectors (30006 MB)
[20985.484185] sdb: Write Protect is off
[20985.484190] sdb: Mode Sense: 68 00 00 08
[20985.484193] sdb: assuming drive cache: write through
[20985.488031] SCSI device sdb: 58605120 512-byte hdwr sectors (30006 MB)
[20985.489304] sdb: Write Protect is off
[20985.489309] sdb: Mode Sense: 68 00 00 08
[20985.489312] sdb: assuming drive cache: write through
[20985.489319] sdb: [mac] sdb1 sdb2 sdb3
[20985.510214] sd 3:0:0:0: Attached scsi removable disk sdb
[20985.510277] sd 3:0:0:0: Attached scsi generic sg1 type 0
[23636.784090] usb 5-6: USB disconnect, address 33
[70875.629155] cdrom: This disc doesn't have any tracks I recognize!
[71236.730540] ISO 9660 Extensions: Microsoft Joliet Level 3
[71236.732603] ISOFS: changing to secondary root
[72727.319932] hdc: tray open
[72727.320641] end_request: I/O error, dev hdc, sector 1096
[72727.320648] Buffer I/O error on device hdc, logical block 137
[72727.322007] hdc: tray open
[72727.322539] end_request: I/O error, dev hdc, sector 1096
[72727.322543] Buffer I/O error on device hdc, logical block 137
[72727.334322] hdc: tray open
[72727.334905] end_request: I/O error, dev hdc, sector 64
[72727.334913] Buffer I/O error on device hdc, logical block 8
[72727.335972] hdc: tray open
[72727.336509] end_request: I/O error, dev hdc, sector 64
[72727.336515] Buffer I/O error on device hdc, logical block 8
[72727.341774] hdc: tray open
[72727.342402] end_request: I/O error, dev hdc, sector 64
[72727.342409] Buffer I/O error on device hdc, logical block 16
[72727.342651] hdc: tray open
[72727.343186] end_request: I/O error, dev hdc, sector 68
[72727.343191] Buffer I/O error on device hdc, logical block 17
[72727.344262] hdc: tray open
[72727.344837] end_request: I/O error, dev hdc, sector 64
[72727.344841] Buffer I/O error on device hdc, logical block 16
[72727.344845] Buffer I/O error on device hdc, logical block 17
[73977.757731] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[73977.810719] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[74000.916757] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[74031.456514] eth0: no IPv6 routers present
[74117.400795] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[74147.433344] eth0: no IPv6 routers present
[79202.235807] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[79234.897645] eth0: no IPv6 routers present
[79248.163803] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[79707.651540] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[79727.852072] eth0: no IPv6 routers present
[79797.571879] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[79819.315603] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[79840.733678] eth0: no IPv6 routers present
[81610.719685] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[81639.034178] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 20
[81639.039460] PCI: Setting latency timer of device 0000:00:11.6 to 64
[82058.184259] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[82058.264475] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 20
[82058.272879] PCI: Setting latency timer of device 0000:00:11.6 to 64
[82130.486795] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[82139.139252] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 20
[82139.144093] PCI: Setting latency timer of device 0000:00:11.6 to 64
[82165.496928] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[82165.606266] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 20
[82165.631780] PCI: Setting latency timer of device 0000:00:11.6 to 64
[82531.671184] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[82531.815596] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 20
[82531.820204] PCI: Setting latency timer of device 0000:00:11.6 to 64
[82552.593549] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[82552.657554] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 20
[82552.692043] PCI: Setting latency timer of device 0000:00:11.6 to 64
[82895.701926] PPP BSD Compression module registered
[82895.757199] PPP Deflate Compression module registered
[83464.293554] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[83464.392216] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 20
[83464.395446] PCI: Setting latency timer of device 0000:00:11.6 to 64
[83502.359785] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[83502.412480] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 20
[83502.444505] PCI: Setting latency timer of device 0000:00:11.6 to 64
[85472.858088] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[85473.236280] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[85494.638884] eth0: no IPv6 routers present
[85501.217493] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[85503.480957] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[85524.025485] eth0: no IPv6 routers present