rendered paste body[root@asterisk ~]# wanrouter hwprobe
-------------------------------
| Wanpipe Hardware Probe Info |
-------------------------------
1 . AFT-A400-SH : SLOT=0 : BUS=6 : IRQ=10 : CPU=A : PORT=PRI : HWEC=32 : V=10
Card Cnt: S508=0 S514X=0 S518=0 A101-2=0 A104=0 A300=0 A200=1 A108=0 A056=0
[root@asterisk ~]# wanrouter status
Devices currently active:
wanpipe1
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate |
wanpipe1 | N/A | A200/400 | 74 | 0 | 1 | EXT | 0 |
Wanrouter Status:
Device name | Protocol | Station | Status |
wanpipe1 | Unknown | N/A | Connected |
[root@asterisk ~]# wanrouter messages | grep wanpipe
[root@asterisk ~]# wanrouter messages
Start WANPIPE /var/log/messages
End of WANPIPE /var/log/messages
[root@asterisk ~]#