rendered paste bodyWelcome to yaboot version 10.1.12-r716.SuSE
booted from '/vdevice/v-scsi@30000003/disk@8000000000000000'
Enter "help" to get some basic usage information
boot: linuxPerfCtr
Please wait, loading kernel...
Allocated 00800000 bytes for kernel @ 00400000
Elf64 kernel loaded...
OF stdout device is: /vdevice/vty@30000000
Hypertas detected, assuming LPAR !
command line: root=/dev/sda3
memory layout at init:
memory_limit : 0000000000000000 (16 MB aligned)
alloc_bottom : 0000000000af9000
alloc_top : 0000000008000000
alloc_top_hi : 0000000040000000
rmo_top : 0000000008000000
ram_top : 0000000040000000
Looking for displays
instantiating rtas at 0x00000000077d7000 ... done
0000000000000000 : boot cpu 0000000000000000
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000001cfa000 -> 0x0000000001cfb1c6
Device tree struct 0x0000000001cfc000 -> 0x0000000001d05000
Calling quiesce ...
returning from prom_init
Page orders: linear mapping = 24, others = 12
Partition configured for 8 cpus.
Starting Linux PPC64 #1 SMP Mon May 22 14:37:02 UTC 2006
-----------------------------------------------------
ppc64_pft_size = 0x1a
ppc64_interrupt_controller = 0x2
platform = 0x101
physicalMemorySize = 0x40000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0x0000000000000000
htab_hash_mask = 0x7ffff
-----------------------------------------------------
[boot]0100 MM Init
[boot]0100 MM Init Done
Linux version 2.6.16.16-1.6-ppc64 (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Mon May 22 14:37:02 UTC 2006
[boot]0012 Setup Arch
Node 0 Memory: 0x0-0xf000000 0x13000000-0x15000000 0x17000000-0x1a000000 0x20000000-0x32000000
Node 1 Memory: 0xf000000-0x13000000 0x15000000-0x17000000 0x1a000000-0x20000000 0x32000000-0x40000000
No ramdisk, default root is /dev/sda2
EEH: PCI Enhanced I/O Error Handling Enabled
PPC64 nvram contains 7168 bytes
Using shared processor idle loop
[boot]0015 Setup Done
Built 2 zonelists
Kernel command line: root=/dev/sda3
[boot]0020 XICS Init
xics: no ISA interrupt controller
[boot]0021 XICS Done
PID hash table entries: 4096 (order: 12, 131072 bytes)
time_init: decrementer frequency = 207.050000 MHz
time_init: processor frequency = 1656.400000 MHz
Page orders: linear mapping = 24, others = 12
Partition configured for 8 cpus.
Starting Linux PPC64 #1 SMP Mon May 22 14:37:02 UTC 2006
-----------------------------------------------------
ppc64_pft_size = 0x1a
ppc64_interrupt_controller = 0x2
platform = 0x101
physicalMemorySize = 0x40000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0x0000000000000000
htab_hash_mask = 0x7ffff
-----------------------------------------------------
[boot]0100 MM Init
[boot]0100 MM Init Done
Linux version 2.6.16.16-1.6-ppc64 (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 SMP Mon May 22 14:37:02 UTC 2006
[boot]0012 Setup Arch
Node 0 Memory: 0x0-0xf000000 0x13000000-0x15000000 0x17000000-0x1a000000 0x20000000-0x32000000
Node 1 Memory: 0xf000000-0x13000000 0x15000000-0x17000000 0x1a000000-0x20000000 0x32000000-0x40000000
No ramdisk, default root is /dev/sda2
EEH: PCI Enhanced I/O Error Handling Enabled
PPC64 nvram contains 7168 bytes
Using shared processor idle loop
[boot]0015 Setup Done
Built 2 zonelists
Kernel command line: root=/dev/sda3
[boot]0020 XICS Init
xics: no ISA interrupt controller
[boot]0021 XICS Done
PID hash table entries: 4096 (order: 12, 131072 bytes)
time_init: decrementer frequency = 207.050000 MHz
time_init: processor frequency = 1656.400000 MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
freeing bootmem node 0
freeing bootmem node 1
Memory: 1014644k/1048576k available (4336k kernel code, 43256k reserved, 1944k data, 840k bss, 256k init)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 256
Processor 1 found.
Brought up 2 CPUs
Node 0 CPUs: 0-1
Node 1 CPUs:
migration_cost=0
NET: Registered protocol family 16
PCI: Probing PCI hardware
IOMMU table initialized, virtual merging enabled
mapping IO 3fe00300000 -> d000080000000000, size: 100000
PCI: Probing PCI hardware done
usbcore: registered new driver usbfs
usbcore: registered new driver hub
TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
IBM eBus Device Driver
RTAS daemon started
audit: initializing netlink socket (disabled)
audit(1151086467.270:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1
HVSI: registered 0 devices
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
isa bounce pool size: 16 pages
RAMDISK driver initialized: 16 RAM disks of 123456K size 1024 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
oprofile: using ppc64/power5 performance monitoring.
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
VFS: Cannot open root device "sda3" or unknown-block(0,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)