rendered paste bodyCFE> flash -noheader 192.168.1.2:openwrt-brcm-2.4-squashfs.trx flash1.trx
CMD: [flash -noheader 192.168.1.2:openwrt-brcm-2.4-squashfs.trx flash1.trx]
Reading 192.168.1.2:openwrt-brcm-2.4-squashfs.trx: Done. 2756608 bytes read
fname=(null)
Programming...done. 2756608 bytes written
**Exception 8: EPC=803165E4, Cause=0000A008 (TLBMissRd)
RA=8031E374, VAddr=00000000
0 ($00) = 00000000 AT ($01) = 80340008
v0 ($02) = 00000066 v1 ($03) = 00000000
a0 ($04) = 00000000 a1 ($05) = 80339EBC
a2 ($06) = 00000000 a3 ($07) = 00000066
t0 ($08) = 00000000 t1 ($09) = 80341940
t2 ($10) = 00000000 t3 ($11) = 00000005
t4 ($12) = B8000000 t5 ($13) = 00000040
t6 ($14) = 00000001 t7 ($15) = BC000000
s0 ($16) = 00000002 s1 ($17) = 803728A0
s2 ($18) = 803A7700 s3 ($19) = 8036F368
s4 ($20) = 00000000 s5 ($21) = 00000000
s6 ($22) = 00000000 s7 ($23) = 00000003
t8 ($24) = A0000000 t9 ($25) = A0000000
k0 ($26) = 2E323931 k1 ($27) = 00322E31
gp ($28) = 80344900 sp ($29) = 803A7648
fp ($30) = 00000000 ra ($31) = 8031E374
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Oct 30 23:22:44 CST 2006 (root@linux)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing PCI. [normal]
PCI: Initializing host
PCI: Enabling CardBus
SB PCI init done
0x3c = 0x00000100
PCI bus 0 slot 0/0: vendor 0x14e4 product 0x0800 (flash memory, rev 0x02)
PCI bus 0 slot 1/0: vendor 0x14e4 product 0x471f (ethernet network)
PCI bus 0 slot 2/0: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x10, rev 0x02)
PCI bus 0 slot 2/1: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x20, rev 0x02)
PCI bus 0 slot 3/0: vendor 0x14e4 product 0x471b (USB serial bus, rev 0x02)
PCI bus 0 slot 4/0: vendor 0x14e4 product 0x0804 (PCI bridge, rev 0x02)
PCI bus 0 slot 5/0: vendor 0x14e4 product 0x0816 (MIPS processor, rev 0x02)
PCI bus 0 slot 6/0: vendor 0x14e4 product 0x471d (IDE mass storage, rev 0x02)
PCI bus 0 slot 7/0: vendor 0x14e4 product 0x4718 (network/computing crypto, rev 0x02)
PCI bus 0 slot 8/0: vendor 0x14e4 product 0x080f (RAM memory, rev 0x02)
PCI bus 0 slot 9/0: vendor 0x14e4 product 0x471e (class 0xfe, subclass 0x00, rev 0x02)
PCI bus 1 slot 0/0: vendor 0x14e4 product 0x4785 (host bridge, rev 0x02)
Initializing Devices.
No DPN
This is a Parallel Flash
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 0004001B (28)
os #02 0004001C -> 007F7FFF (8093668)
nvram #03 007F8000 -> 007FFFFF (32768)
Partition information:
boot #00 00000000 -> 0003FFFF (262144)
trx #01 00040000 -> 007F7FFF (8093696)
nvram #02 007F8000 -> 007FFFFF (32768)
PCI bus 0 slot 1/0: _pci_map_mem: attempt to map 64-bit region tag =0x800 @ addr=18010004
PCI bus 0 slot 1/0: _pci_map_mem: addr=0x18010004 pa=0x18010000 pci_mem_space_pci_base=0x40000000 pci_mem_space=0x8000000
mcfg = 00081082
ge0: BCM5750 Ethernet at 0x18010000
CPU type 0x2901A: 300MHz
Total memory: 32768 KBytes
Total memory used by CFE: 0x80300000 - 0x803A7AB0 (686768)
Initialized Data: 0x8033C900 - 0x8033FCB0 (13232)
BSS Area: 0x8033FCB0 - 0x80341AB0 (7680)
Local Heap: 0x80341AB0 - 0x803A5AB0 (409600)
Stack Area: 0x803A5AB0 - 0x803A7AB0 (8192)
Text (code) segment: 0x80300000 - 0x8033C900 (248064)
Boot area (physical): 0x003A8000 - 0x003E8000
Relocation Factor: I:00000000 - D:00000000
Boot version: v4.2
The boot is CFE
mac_init(): Find mac [00:1A:70:DD:5B:07] in location 0
Nothing...
eou_key_init(): Find key pair in location 4
The eou device id is same
The eou public key is same
The eou private key is same
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
bcm5700: no firmware rendevous
eth0: Link speed: 1000BaseT FDX
Device eth0: hwaddr 00-1A-70-DD-5B-07, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
Len: 0x2A1000 (2756608) (0xBC040000)
Offset0: 0x1C (28) (0xBC04001C)
Offset1: 0x20 (32) (0xBC040020)
Offset2: 0x7D400 (513024) (0xBC0BD400)
Header CRC: 0x8AFF6982
Calculate CRC: 0x8AFF6982
Image 1 is OK
Try to load image 1.
CMD: [boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:]
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: . 0 bytes read
Failed.
Could not load flash0.os:: Error
CFE>