rendered paste body[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
[4294667.296000] BIOS-e820: 000000001f6e0000 - 000000001f6ea000 (ACPI data)
[4294667.296000] BIOS-e820: 000000001f6ea000 - 000000001f700000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
[4294667.296000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[4294667.296000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[4294667.296000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 502MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 128736
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 124640 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI present.
[4294667.296000] ACPI: RSDP (v000 PTLTD ) @ 0x000f7e10
[4294667.296000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1f6e3558
[4294667.296000] ACPI: FADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1f6e9e88
[4294667.296000] ACPI: MADT (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1f6e9efc
[4294667.296000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1f6e9fd8
[4294667.296000] ACPI: MCFG (v001 INTEL ALVISO 0x06040000 LOHR 0x0000005f) @ 0x1f6e9f9c
[4294667.296000] ACPI: SSDT (v001 SataRe SataAhci 0x00001000 INTL 0x20030224) @ 0x1f6e3dd2
[4294667.296000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1f6e398d
[4294667.296000] ACPI: SSDT (v001 PmRef Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1f6e37b5
[4294667.296000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x1f6e359c
[4294667.296000] ACPI: DSDT (v001 INTEL ALVISO 0x06040000 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x1008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:13 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 1597.056 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.572000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.573000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.584000] Memory: 500020k/514944k available (1976k kernel code, 14348k reserved, 606k data, 288k init, 0k highmem)
[4294670.584000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.644000] Calibrating delay using timer specific routine.. 3196.13 BogoMIPS (lpj=1598067)
[4294670.644000] Security Framework v1.0.0 initialized
[4294670.644000] SELinux: Disabled at boot.
[4294670.644000] Mount-cache hash table entries: 512
[4294670.644000] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
[4294670.644000] CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
[4294670.644000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294670.644000] CPU: L2 cache: 2048K
[4294670.644000] CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000
[4294670.644000] mtrr: v2.0 (20020519)
[4294670.644000] CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
[4294670.644000] Enabling fast FPU save and restore... done.
[4294670.644000] Enabling unmasked SIMD FPU exception support... done.
[4294670.644000] Checking 'hlt' instruction... OK.
[4294670.648000] checking if image is initramfs... it is
[4294671.309000] Freeing initrd memory: 6616k freed
[4294671.315000] ACPI: Looking for DSDT ... not found!
[4294671.356000] ENABLING IO-APIC IRQs
[4294671.356000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294671.470000] NET: Registered protocol family 16
[4294671.470000] EISA bus registered
[4294671.470000] ACPI: bus type pci registered
[4294671.470000] PCI: PCI BIOS revision 2.10 entry at 0xfd934, last bus=7
[4294671.470000] PCI: Using MMCONFIG
[4294671.470000] ACPI: Subsystem revision 20051216
[4294671.475000] ACPI: Interpreter enabled
[4294671.475000] ACPI: Using IOAPIC for interrupt routing
[4294671.476000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.476000] PCI: Probing PCI hardware (bus 00)
[4294671.477000] Boot video device is 0000:00:02.0
[4294671.478000] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[4294671.478000] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[4294671.478000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294671.479000] PCI: Transparent bridge - 0000:00:1e.0
[4294671.479000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.488000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[4294671.489000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[4294671.489000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[4294671.490000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[4294671.490000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[4294671.491000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[4294671.491000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[4294671.491000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[4294671.491000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[4294671.492000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[4294671.492000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[4294671.492000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[4294671.492000] ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
[4294671.501000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.501000] pnp: PnP ACPI init
[4294671.504000] pnp: PnP ACPI: found 9 devices
[4294671.504000] PnPBIOS: Disabled by ACPI PNP
[4294671.504000] PCI: Using ACPI for IRQ routing
[4294671.504000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294671.504000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[4294671.504000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[4294671.504000] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[4294671.504000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[4294671.504000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[4294671.504000] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[4294671.504000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[4294671.504000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[4294671.505000] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
[4294671.525000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294671.525000] PCI: Bridge: 0000:00:1c.0
[4294671.525000] IO window: disabled.
[4294671.525000] MEM window: disabled.
[4294671.525000] PREFETCH window: disabled.
[4294671.525000] PCI: Bridge: 0000:00:1c.1
[4294671.525000] IO window: disabled.
[4294671.525000] MEM window: disabled.
[4294671.525000] PREFETCH window: disabled.
[4294671.525000] PCI: Bridge: 0000:00:1c.2
[4294671.525000] IO window: disabled.
[4294671.525000] MEM window: disabled.
[4294671.525000] PREFETCH window: disabled.
[4294671.525000] PCI: Bus 7, cardbus bridge: 0000:06:09.0
[4294671.525000] IO window: 00002400-000024ff
[4294671.525000] IO window: 00002800-000028ff
[4294671.525000] PREFETCH window: 30000000-31ffffff
[4294671.525000] MEM window: 34000000-35ffffff
[4294671.525000] PCI: Bridge: 0000:00:1e.0
[4294671.525000] IO window: 2000-2fff
[4294671.525000] MEM window: b0100000-b01fffff
[4294671.525000] PREFETCH window: 30000000-31ffffff
[4294671.525000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
[4294671.525000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294671.525000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
[4294671.525000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4294671.525000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[4294671.525000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[4294671.525000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294671.525000] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 16 (level, low) -> IRQ 177
[4294671.525000] Simple Boot Flag at 0x36 set to 0x1
[4294671.526000] audit: initializing netlink socket (disabled)
[4294671.526000] audit(1150163060.525:1): initialized
[4294671.526000] VFS: Disk quotas dquot_6.5.1
[4294671.526000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294671.526000] Initializing Cryptographic API
[4294671.526000] io scheduler noop registered
[4294671.526000] io scheduler anticipatory registered
[4294671.526000] io scheduler deadline registered
[4294671.526000] io scheduler cfq registered
[4294671.526000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
[4294671.526000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294671.526000] assign_interrupt_mode Found MSI capability
[4294671.526000] Allocate Port Service[pcie00]
[4294671.526000] Allocate Port Service[pcie02]
[4294671.526000] Allocate Port Service[pcie03]
[4294671.526000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
[4294671.526000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4294671.526000] assign_interrupt_mode Found MSI capability
[4294671.526000] Allocate Port Service[pcie00]
[4294671.526000] Allocate Port Service[pcie02]
[4294671.526000] Allocate Port Service[pcie03]
[4294671.526000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[4294671.526000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[4294671.526000] assign_interrupt_mode Found MSI capability
[4294671.526000] Allocate Port Service[pcie00]
[4294671.526000] Allocate Port Service[pcie02]
[4294671.526000] Allocate Port Service[pcie03]
[4294671.527000] isapnp: Scanning for PnP cards...
[4294671.887000] isapnp: No Plug & Play device found
[4294671.904000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294671.960000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.964000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.964000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294671.964000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.966000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294671.966000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.966000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.966000] mice: PS/2 mouse device common for all mice
[4294672.037000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294672.038000] EISA: Probing bus 0 at eisa.0
[4294672.038000] Cannot allocate resource for EISA slot 1
[4294672.038000] Cannot allocate resource for EISA slot 2
[4294672.038000] EISA: Detected 0 cards.
[4294672.038000] NET: Registered protocol family 2
[4294672.100000] input: AT Translated Set 2 keyboard as /class/input/input1
[4294672.108000] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying access hardware directly.
[4294672.110000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[4294672.110000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[4294672.110000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294672.110000] TCP: Hash tables configured (established 16384 bind 16384)
[4294672.110000] TCP reno registered
[4294672.110000] TCP bic registered
[4294672.110000] NET: Registered protocol family 1
[4294672.110000] NET: Registered protocol family 8
[4294672.110000] NET: Registered protocol family 20
[4294672.110000] Using IPI Shortcut mode
[4294672.110000] ACPI wakeup devices:
[4294672.110000] AZAL RP01 RP02 RP03 RP04 USB1 USB2 USB3 USB4 USB7 LANC MODM
[4294672.110000] ACPI: (supports S0 S3 S4 S5)
[4294672.110000] Freeing unused kernel memory: 288k freed
[4294672.151000] vga16fb: initializing
[4294672.151000] vga16fb: mapped to 0xc00a0000
[4294672.273000] Console: switching to colour frame buffer device 80x25
[4294672.273000] fb0: VGA16 VGA frame buffer device
[4294673.360000] Capability LSM initialized
[4294673.387000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[4294673.387000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294673.389000] ACPI: Thermal Zone [THRM] (44 C)
[4294673.772000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[4294673.772000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
[4294673.772000] ICH6: chipset revision 4
[4294673.772000] ICH6: not 100% native mode: will probe irqs later
[4294673.772000] ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:DMA
[4294673.772000] Probing IDE interface ide0...
[4294674.036000] hda: FUJITSU MHT2040AH, ATA DISK drive
[4294674.751000] hdb: QSI CD-RW/DVD-ROM SBW242C, ATAPI CD/DVD-ROM drive
[4294674.804000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294674.887000] hda: max request size: 128KiB
[4294674.893000] hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
[4294674.896000] hda: cache flushes supported
[4294674.896000] hda: hda1 hda2 hda3 hda4
[4294674.921000] hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294674.921000] Uniform CD-ROM driver Revision: 3.20
[4294675.319000] usbcore: registered new driver usbfs
[4294675.319000] usbcore: registered new driver hub
[4294675.320000] USB Universal Host Controller Interface driver v2.3
[4294675.321000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
[4294675.321000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294675.321000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294675.322000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294675.322000] uhci_hcd 0000:00:1d.0: irq 225, io base 0x00001820
[4294675.323000] hub 1-0:1.0: USB hub found
[4294675.323000] hub 1-0:1.0: 2 ports detected
[4294675.392000] ieee1394: Initialized config rom entry `ip1394'
[4294675.424000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
[4294675.424000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294675.424000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294675.424000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294675.424000] uhci_hcd 0000:00:1d.1: irq 233, io base 0x00001840
[4294675.424000] hub 2-0:1.0: USB hub found
[4294675.424000] hub 2-0:1.0: 2 ports detected
[4294675.525000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[4294675.525000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294675.525000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294675.525000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294675.525000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001860
[4294675.525000] hub 3-0:1.0: USB hub found
[4294675.525000] hub 3-0:1.0: 2 ports detected
[4294675.626000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
[4294675.626000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294675.626000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294675.626000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294675.626000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x00001880
[4294675.626000] hub 4-0:1.0: USB hub found
[4294675.626000] hub 4-0:1.0: 2 ports detected
[4294675.728000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
[4294675.728000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294675.728000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294675.728000] ehci_hcd 0000:00:1d.7: debug port 1
[4294675.728000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294675.728000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294675.728000] ehci_hcd 0000:00:1d.7: irq 225, io mem 0xb0004000
[4294675.732000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294675.733000] hub 5-0:1.0: USB hub found
[4294675.733000] hub 5-0:1.0: 8 ports detected
[4294675.834000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[4294675.834000] ACPI: PCI Interrupt 0000:06:09.2[C] -> GSI 18 (level, low) -> IRQ 185
[4294675.884000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[b0106800-b0106fff] Max Packet=[2048]
[4294675.917000] Probing IDE interface ide1...
[4294676.458000] Attempting manual resume
[4294676.464000] ReiserFS: hda1: found reiserfs format "3.6" with standard journal
[4294677.140000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800285608080808]
[4294677.171000] ReiserFS: hda1: using ordered data mode
[4294677.191000] ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[4294677.192000] ReiserFS: hda1: checking transaction log (hda1)
[4294677.236000] ReiserFS: hda1: Using r5 hash to sort names
[4294688.358000] Linux agpgart interface v0.101 (c) Dave Jones
[4294688.404000] agpgart: Detected an Intel 915GM Chipset.
[4294688.405000] agpgart: Detected 7932K stolen memory.
[4294688.422000] agpgart: AGP aperture is 256M @ 0xc0000000
[4294688.765000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 177
[4294688.765000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4294688.884000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294688.967000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294689.101000] hw_random: RNG not detected
[4294689.294000] Real Time Clock Driver v1.12
[4294689.711000] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 16 (level, low) -> IRQ 177
[4294689.711000] Yenta: CardBus bridge found at 0000:06:09.0 [152d:0729]
[4294689.711000] Yenta: Enabling burst memory read transactions
[4294689.711000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294689.711000] Yenta: Routing CardBus interrupts to PCI
[4294689.711000] Yenta TI: socket 0000:06:09.0, mfunc 0x00c21b22, devctl 0x64
[4294689.726000] ieee80211_1_1_13_crypt: registered algorithm 'NULL'
[4294689.756000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294689.756000] 8139cp: pci dev 0000:06:00.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[4294689.756000] 8139cp: Try the "8139too" driver instead.
[4294689.774000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13
[4294689.774000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4294689.823000] ieee80211_crypt: registered algorithm 'NULL'
[4294689.856000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4294689.856000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4294689.868000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
[4294689.895000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1
[4294689.895000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[4294689.895000] Warning: PCI driver ipw2200 has a struct device_driver shutdown method, please update!
[4294689.895000] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 17 (level, low) -> IRQ 169
[4294689.895000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[4294689.903000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[4294689.934000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 177
[4294689.934000] Socket status: 30000006
[4294689.934000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #08
[4294689.934000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[4294689.934000] cs: IO port probe 0x2000-0x2fff: clean.
[4294689.935000] pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff
[4294689.935000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
[4294689.971000] 8139too Fast Ethernet driver 0.9.27
[4294689.971000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 233
[4294690.081000] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[4294690.082000] eth1: RealTek RTL8139 at 0xe02dc000, 00:c0:9f:82:c4:34, IRQ 233
[4294690.082000] eth1: Identified 8139 chip type 'RTL-8100B/8139D'
[4294690.129000] ts: Compaq touchscreen protocol output
[4294690.384000] cs: IO port probe 0x100-0x3af: clean.
[4294690.386000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[4294690.387000] cs: IO port probe 0x820-0x8ff: clean.
[4294690.387000] cs: IO port probe 0xc00-0xcf7: clean.
[4294690.388000] cs: IO port probe 0xa00-0xaff: clean.
[4294690.938000] lp: driver loaded but no devices found
[4294691.031000] SCSI subsystem initialized
[4294691.091000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[4294691.091000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294691.091000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294692.798000] Adding 803240k swap on /dev/hda2. Priority:-1 extents:1 across:803240k
[4294694.034000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294694.034000] md: bitmap version 4.39
[4294694.877000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294695.406000] cdrom: open failed.
[4294695.914000] kjournald starting. Commit interval 5 seconds
[4294695.915000] EXT3 FS on hda3, internal journal
[4294695.915000] EXT3-fs: mounted filesystem with writeback data mode.
[4294696.945000] ip_tables: (C) 2000-2002 Netfilter core team
[4294696.970000] Netfilter messages via NETLINK v0.30.
[4294696.982000] ip_conntrack version 2.4 (4023 buckets, 32184 max) - 232 bytes per conntrack
[4294697.484000] ACPI: AC Adapter [ACAD] (off-line)
[4294697.522000] pcc_acpi: loading...
[4294697.532000] ACPI: Power Button (FF) [PWRF]
[4294697.533000] ACPI: Lid Switch [LID]
[4294697.533000] ACPI: Power Button (CM) [PWRB]
[4294697.533000] ACPI: Sleep Button (CM) [SLPB]
[4294697.583000] ibm_acpi: ec object not found
[4294697.627000] ACPI: Battery Slot [BAT0] (battery present)
[4294697.648000] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[4294702.085000] eth0: link down
[4294702.146000] NET: Registered protocol family 10
[4294702.146000] lo: Disabled Privacy Extensions
[4294702.146000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4294702.146000] IPv6 over IPv4 tunneling driver
[4294702.151000] wlan0: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
[4294702.520000] ppdev: user-space parallel port driver
[4294703.961000] apm: BIOS not found.
[4294704.961000] Bluetooth: Core ver 2.8
[4294704.961000] NET: Registered protocol family 31
[4294704.961000] Bluetooth: HCI device and connection manager initialized
[4294704.961000] Bluetooth: HCI socket layer initialized
[4294704.991000] Bluetooth: L2CAP ver 2.8
[4294704.991000] Bluetooth: L2CAP socket layer initialized
[4294704.994000] Bluetooth: RFCOMM socket layer initialized
[4294704.994000] Bluetooth: RFCOMM TTY layer initialized
[4294704.994000] Bluetooth: RFCOMM ver 1.7
[4294707.990000] [drm] Initialized drm 1.0.1 20051102
[4294708.013000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
[4294708.013000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4294708.014000] [drm] Initialized i915 1.4.0 20060119 on minor 0:
[4294713.005000] wlan0: no IPv6 routers present
[4294780.187000] device wlan0 entered promiscuous mode
[4294780.424000] NET: Registered protocol family 17
[4294796.176000] device wlan0 left promiscuous mode
[4294806.400000] ieee80211_crypt: registered algorithm 'WEP'
[4294874.405000] wlan0: no IPv6 routers present
[4294882.428000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[4294899.502000] wlan0: no IPv6 routers present
[4298475.081000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[4298475.203000] NTFS volume version 3.1.
[4298494.328000] NTFS-fs error (device hda4): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set cp437. You might want to try to use the mount option nls=utf8.
[4298494.328000] NTFS-fs warning (device hda4): ntfs_filldir(): Skipping unrepresentable inode 0x26d0.
[4300219.486000] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[4300219.852000] wlan0: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
[4300219.864000] ACPI: PCI interrupt for device 0000:06:04.0 disabled
[4300220.964000] ieee80211_1_1_13_crypt: unregistered algorithm 'NULL'
[4300223.690000] Stopping tasks: ========================================================================================================================================|
[4300225.224000] ACPI: PCI interrupt for device 0000:06:09.0 disabled
[4300225.225000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[4300225.236000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[4300225.236000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[4300225.236000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[4300225.236000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[4300225.240000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[4300225.240000] Back to C!
[4300301.328000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
[4300301.328000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4300301.329000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 177
[4300301.329000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4300301.361000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
[4300301.361000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4300301.361000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
[4300301.361000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4300301.361000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[4300301.361000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[4300301.361000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
[4300301.361000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4300301.361000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
[4300301.361000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4300301.361000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[4300301.361000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4300301.361000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
[4300301.361000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4300301.372000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
[4300301.372000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4300301.375000] ehci_hcd 0000:00:1d.7: debug port 1
[4300301.375000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4300301.379000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4300301.379000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4300301.379000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
[4300301.380000] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 16 (level, low) -> IRQ 177
[4300301.380000] PCI: Enabling device 0000:06:09.2 (0000 -> 0002)
[4300301.380000] ACPI: PCI Interrupt 0000:06:09.2[C] -> GSI 18 (level, low) -> IRQ 185
[4300302.162000] Restarting tasks... done
[4300303.644000] 8139too Fast Ethernet driver 0.9.27
[4300303.645000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 233
[4300303.647000] eth0: RealTek RTL8139 at 0xe035a000, 00:c0:9f:82:c4:34, IRQ 233
[4300303.648000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4300303.722000] ieee80211_1_1_13_crypt: registered algorithm 'NULL'
[4300303.727000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13
[4300303.727000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4300303.808000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4300303.809000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4300303.958000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1
[4300303.959000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[4300303.959000] Warning: PCI driver ipw2200 has a struct device_driver shutdown method, please update!
[4300303.961000] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 17 (level, low) -> IRQ 169
[4300303.961000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[4300304.207000] eth0: link down
[4300304.208000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4300304.208000] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[4300304.281000] wlan0: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
[4300305.739000] ACPI: Power Button (FF) [PWRF]
[4300305.740000] ACPI: Lid Switch [LID]
[4300305.740000] ACPI: Power Button (CM) [PWRB]
[4300305.741000] ACPI: Sleep Button (CM) [SLPB]
[4300305.828000] ACPI: Thermal Zone [THRM] (50 C)
[4300305.895000] ACPI: AC Adapter [ACAD] (on-line)
[4300305.957000] ACPI: Battery Slot [BAT0] (battery present)
[4300314.439000] wlan0: no IPv6 routers present
[4300376.430000] wlan0: no IPv6 routers present
[4300464.993000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[4300475.532000] wlan0: no IPv6 routers present
[4300555.912000] wlan0: no IPv6 routers present
[4300568.720000] wlan0: no IPv6 routers present
[4303350.259000] NET: Registered protocol family 4
[4303350.306000] NET: Registered protocol family 3
[4303350.338000] NET: Registered protocol family 5
[4303574.523000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[4303575.205000] Bluetooth: HCI USB driver ver 2.9
[4303575.207000] usbcore: registered new driver hci_usb
[4303676.956000] CSLIP: code copyright 1989 Regents of the University of California
[4303676.968000] PPP generic driver version 2.4.2
[4303677.974000] PPP BSD Compression module registered
[4303678.058000] PPP Deflate Compression module registered
[4304592.817000] usb 1-2: USB disconnect, address 2
[4351057.273000] usb 2-2: new full speed USB device using uhci_hcd and address 2
[4351057.933000] hci_cmd_task: hci0 command tx timeout
[4351865.081000] device wlan0 entered promiscuous mode
[4351865.083000] wlan0: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
[4351869.067000] usb 2-2: USB disconnect, address 2
[4351875.119000] wlan0: no IPv6 routers present
[4351935.752000] device wlan0 left promiscuous mode
[4351941.265000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[4351953.559000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[4351972.922000] wlan0: no IPv6 routers present
[4359765.773000] usb 2-2: new full speed USB device using uhci_hcd and address 3
[4361702.567000] usb 2-2: USB disconnect, address 3
[4379943.853000] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[4379944.108000] dev_mc_discard: multicast leakage! dmi_users=1
[4379944.108000] dev_mc_discard: multicast leakage! dmi_users=1
[4379944.108000] dev_mc_discard: multicast leakage! dmi_users=1
[4379944.113000] ACPI: PCI interrupt for device 0000:06:04.0 disabled
[4379944.996000] ieee80211_1_1_13_crypt: unregistered algorithm 'NULL'
[4379947.306000] Stopping tasks: ==================================================================================================================|
[4379948.287000] ACPI: PCI interrupt for device 0000:06:09.0 disabled
[4379948.287000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[4379948.298000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[4379948.298000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[4379948.298000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[4379948.298000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[4379948.302000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[4379948.302000] Back to C!
[4382110.418000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
[4382110.418000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4382110.418000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 177
[4382110.419000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4382110.451000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
[4382110.451000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4382110.451000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
[4382110.451000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4382110.451000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[4382110.451000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[4382110.451000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 225
[4382110.451000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4382110.451000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
[4382110.451000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4382110.451000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[4382110.451000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4382110.451000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
[4382110.451000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4382110.462000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 225
[4382110.462000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4382110.465000] ehci_hcd 0000:00:1d.7: debug port 1
[4382110.465000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4382110.469000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4382110.469000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4382110.469000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
[4382110.470000] ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 16 (level, low) -> IRQ 177
[4382110.470000] PCI: Enabling device 0000:06:09.2 (0000 -> 0002)
[4382110.470000] ACPI: PCI Interrupt 0000:06:09.2[C] -> GSI 18 (level, low) -> IRQ 185
[4382111.246000] Restarting tasks... done
[4382113.592000] 8139too Fast Ethernet driver 0.9.27
[4382113.594000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 233
[4382113.595000] eth0: RealTek RTL8139 at 0xe0376000, 00:c0:9f:82:c4:34, IRQ 233
[4382113.595000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4382113.625000] ieee80211_1_1_13_crypt: registered algorithm 'NULL'
[4382113.637000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13
[4382113.637000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4382113.659000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4382113.659000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4382113.728000] eth0: link down
[4382113.728000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4382113.752000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1
[4382113.752000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[4382113.752000] Warning: PCI driver ipw2200 has a struct device_driver shutdown method, please update!
[4382113.754000] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 17 (level, low) -> IRQ 169
[4382113.754000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[4382113.994000] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[4382114.035000] wlan0: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full.
[4382114.751000] ACPI: Power Button (FF) [PWRF]
[4382114.751000] ACPI: Lid Switch [LID]
[4382114.752000] ACPI: Power Button (CM) [PWRB]
[4382114.752000] ACPI: Sleep Button (CM) [SLPB]
[4382114.830000] ACPI: Thermal Zone [THRM] (37 C)
[4382114.930000] ACPI: AC Adapter [ACAD] (off-line)
[4382114.996000] ACPI: Battery Slot [BAT0] (battery present)
[4382124.397000] wlan0: no IPv6 routers present
[4382224.873000] device wlan0 entered promiscuous mode
[4383012.055000] device wlan0 left promiscuous mode
[4383148.692000] device wlan0 entered promiscuous mode
[4383202.820000] device wlan0 left promiscuous mode
[4383255.857000] usb 2-2: new full speed USB device using uhci_hcd and address 4
[4383459.030000] device wlan0 entered promiscuous mode
[4383800.531000] device wlan0 left promiscuous mode
[4384114.750000] device wlan0 entered promiscuous mode
[4384456.944000] device wlan0 left promiscuous mode
[4384460.669000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[4384460.669000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[4384460.873000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[4384460.873000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.