rendered paste body# cat /etc/zaptel.conf |grep -v ^#
span=1,0,0,esf,b8zs
loadzone = us
defaultzone=us
bchan=1-23
dchan=24
# cat /etc/asterisk/zapata.conf |grep -v ^#
[trunkgroups]
[channels]
switchtype=national
context=from-ctc
signalling=pri_cpe
prilocaldialplan=local
group=1
channel => 1-23
*CLI> zap show status
Description Alarms IRQ bpviol CRC4
wanpipe1 card 0 OK 0 0 0
Error CLEC SENT ME:
L1745690CP1#
Jun 13 17:16:17.040: ISDN Se1:23 Q931: RX <- SETUP pd = 8 callref = 0x0002
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Progress Ind i = 0x8083 - Origination address is non-ISDN <<<<
Calling Party Number i = 0x00C3, N/A
Plan:Unknown, Type:Unknown
Called Party Number i = 0xA1, '18004444444'
Plan:ISDN, Type:National
Jun 13 17:16:17.088: ISDN Se1:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x80
02
Cause i = 0x82E4 - Invalid information element contents <<<<<THIS IS THE ERROR MESSAGE
L1745690CP1#
------------------------
# wanrouter status
Devices currently active:
wanpipe1
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate |
wanpipe1 | N/A | A101/2 | 21 | 2 | 1 | EXT | 0 |
Wanrouter Status:
Device name | Protocol | Station | Status |
wanpipe1 | AFT HDLC | N/A | Connected |